Pull cifs fixes from Steve French:
 "Four small CIFS/SMB3 fixes. One (the EA overflow fix) for stable"

* tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: make sure we do not overflow the max EA buffer size
  cifs: enable change notification for SMB2.1 dialect
  cifs: Fix mode output in debugging statements
  cifs: fix mount option display for sec=krb5i

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes (all stable fodder)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: improve explanation of a mount failure caused by a misconfigured kernel
  jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer
  jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()
  ext4: add cond_resched() to ext4_protect_reserved_inode
  ext4: fix checksum errors with indexed dirs
  ext4: fix support for inode sizes > 1024 bytes
  ext4: simplify checking quota limits in ext4_statfs()
  ext4: don't assume that mmp_nodename/bdevname have NUL

Pull input updates from Dmitry Torokhov:

 - a few drivers have been updated to use flexible-array syntax instead
   of GCC extension

 - ili210x touchscreen driver now supports the 2120 protocol flavor

 - a couple more of Synaptics devices have been switched over to RMI4

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cyapa - replace zero-length array with flexible-array member
  Input: tca6416-keypad - replace zero-length array with flexible-array member
  Input: gpio_keys_polled - replace zero-length array with flexible-array member
  Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
  Input: synaptics - enable SMBus on ThinkPad L470
  Input: synaptics - switch T470s to RMI4 by default
  Input: gpio_keys - replace zero-length array with flexible-array member
  Input: goldfish_events - replace zero-length array with flexible-array member
  Input: psmouse - switch to using i2c_new_scanned_device()
  Input: ili210x - add ili2120 support
  Input: ili210x - fix return value of is_visible function

Pull rdma fixes from Jason Gunthorpe:
 "Not too much going on here, though there are about four fixes related
  to stuff merged during the last merge window.

  We also see the return of a syzkaller instance with access to RDMA
  devices, and a few bugs detected by that squished.

   - Fix three crashers and a memory memory leak for HFI1

   - Several bugs found by syzkaller

   - A bug fix for the recent QP counters feature on older mlx5 HW

   - Locking inversion in cxgb4

   - Unnecessary WARN_ON in siw

   - A umad crasher regression during unload, from a bug fix for
     something else

   - Bugs introduced in the merge window:
       - Missed list_del in uverbs file rework, core and mlx5 devx
       - Unexpected integer math truncation in the mlx5 VAR patches
       - Compilation bug fix for the VAR patches on 32 bit"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/mlx5: Use div64_u64 for num_var_hw_entries calculation
  RDMA/core: Fix protection fault in get_pkey_idx_qp_list
  RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq
  RDMA/mlx5: Prevent overflow in mmap offset calculations
  IB/umad: Fix kernel crash while unloading ib_umad
  RDMA/mlx5: Fix async events cleanup flows
  RDMA/core: Add missing list deletion on freeing event queue
  RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()
  RDMA/iw_cxgb4: initiate CLOSE when entering TERM
  IB/mlx5: Return failure when rts2rts_qp_counters_set_id is not supported
  RDMA/core: Fix invalid memory access in spec_filter_size
  IB/rdmavt: Reset all QPs when the device is shut down
  IB/hfi1: Close window for pq and request coliding
  IB/hfi1: Acquire lock to release TID entries when user file is closed
  RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_create

Pull ARM SoC fixes from Olof Johansson:
 "A handful of fixes that have come in since the merge window:

   - Fix of PCI interrupt map on arm64 fast model (SW emulator)

   - Fixlet for sound on ST platforms and a small cleanup of deprecated
     DT properties

   - A stack buffer overflow fix for moxtet

   - Fuse driver build fix for Tegra194

   - A few config updates to turn on new drivers merged this cycle"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  bus: moxtet: fix potential stack buffer overflow
  soc/tegra: fuse: Fix build with Tegra194 configuration
  ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi
  ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260
  arm64: defconfig: Enable DRM_SUN6I_DSI
  arm64: defconfig: Enable CONFIG_SUN8I_THERMAL
  ARM: sunxi: Enable CONFIG_SUN8I_THERMAL
  arm64: defconfig: Set bcm2835-dma as built-in
  ARM: configs: Cleanup old Kconfig options
  ARM: npcm: Bring back GPIOLIB support
  arm64: dts: fast models: Fix FVP PCI interrupt-map property

Pull s390 updates from Vasily Gorbik:

 - Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu).

 - Fix protected key length update in PKEY_SEC2PROTK ioctl and increase
   card/queue requests counter to 64-bit in crypto code.

 - Fix clang warning in get_tod_clock.

 - Fix ultravisor info length extensions handling.

 - Fix style of SPDX License Identifier in vfio-ccw.

 - Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio.

* tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  crypto/testmgr: enable selftests for paes-s390 ciphers
  s390/time: Fix clk type in get_tod_clock
  s390/uv: Fix handling of length extensions
  s390/qdio: don't allocate *aob array with GFP_ATOMIC
  s390/qdio: simplify ACK tracking
  s390/zcrypt: fix card and queue total counter wrap
  s390/pkey: fix missing length of protected key on return
  vfio-ccw: Use the correct style for SPDX License Identifier

Merge tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix compatible string typos in the xdpe12284 driver, and a wrong bit
  value in the ltc2978 driver"

* tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/xdpe12284) fix typo in compatible strings
  hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes all over the place:

   - Fix NUMA over-balancing between lightly loaded nodes. This is
     fallout of the big load-balancer rewrite.

   - Fix the NOHZ remote loadavg update logic, which fixes anomalies
     like reported 150 loadavg on mostly idle CPUs.

   - Fix XFS performance/scalability

   - Fix throttled groups unbound task-execution bug

   - Fix PSI procfs boundary condition

   - Fix the cpu.uclamp.{min,max} cgroup configuration write checks

   - Fix DocBook annotations

   - Fix RCU annotations

   - Fix overly CPU-intensive housekeeper CPU logic loop on large CPU
     counts"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
  sched/core: Annotate curr pointer in rq with __rcu
  sched/psi: Fix OOB write when writing 0 bytes to PSI files
  sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
  sched/fair: Prevent unlimited runtime on throttled group
  sched/nohz: Optimize get_nohz_timer_target()
  sched/uclamp: Reject negative values in cpu_uclamp_write()
  sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains
  timers/nohz: Update NOHZ load in remote tick
  sched/core: Don't skip remote tick for idle CPUs

Pull perf fixes from Ingo Molnar:
 "Fixes and HW enablement patches:

   - Tooling fixes, most of which are tooling header synchronization
     with v5.6 changes

   - Fix kprobes fallout on ARM

   - Add Intel Elkhart Lake support and extend Tremont support, these
     are relatively simple and should only affect those models

   - Fix the AMD family 17h generic event table"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  perf llvm: Fix script used to obtain kernel make directives to work with new kbuild
  tools headers kvm: Sync linux/kvm.h with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  tools arch x86: Sync asm/cpufeatures.h with the kernel sources
  tools headers x86: Sync disabled-features.h
  tools include UAPI: Sync sound/asound.h copy
  tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
  perf tools: Add arm64 version of get_cpuid()
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers uapi: Sync linux/fscrypt.h with the kernel sources
  tools headers UAPI: Sync sched.h with the kernel
  perf trace: Resolve prctl's 'option' arg strings to numbers
  perf beauty prctl: Export the 'options' strarray
  tools headers UAPI: Sync prctl.h with the kernel sources
  tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sources
  perf maps: Move kmap::kmaps setup to maps__insert()
  perf maps: Fix map__clone() for struct kmap
  perf maps: Mark ksymbol DSOs with kernel type
  perf maps: Mark module DSOs with kernel type
  tools include UAPI: Sync x86's syscalls_64.tbl, generic unistd.h and fcntl.h to pick up openat2 and pidfd_getfd
  ...

The input_read function declares the size of the hex array relative to
sizeof(buf), but buf is a pointer argument of the function. The hex
array is meant to contain hexadecimal representation of the bin array.

Link: https://lore.kernel.org/r/20200215142130.22743-1-marek.behun@nic.cz
Fixes: 5bc7f990 ("bus: Add support for Moxtet bus")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reported-by: sohu0106 <sohu0106@126.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a
user tries to mount a file system with the quota or project quota
enabled, the kernel will emit a very confusing messsage:

    EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix.
    EXT4-fs (vdc): mount failed

We will now report an explanatory message indicating which kernel
configuration options have to be enabled, to avoid customer/sysadmin
confusion.

Link: https://lore.kernel.org/r/20200215012738.565735-1-tytso@mit.edu
Google-Bug-Id: 149093531
Fixes: 7c319d32 ("ext4: make quota as first class supported feature")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

Merge tag 'perf-urgent-for-mingo-5.6-20200214' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

BPF:

  Arnaldo Carvalho de Melo:

  - Fix script used to obtain kernel make directives to work with new kbuild
    used for building BPF programs.

maps:

  Jiri Olsa:

  - Fixup kmap->kmaps backpointer in kernel maps.

arm64:

  John Garry:

  - Add arm64 version of get_cpuid() to get proper, arm64 specific output from
    'perf list' and other tools.

perf top:

  Kim Phillips:

  - Update kernel idle symbols so that output in AMD systems is in line with
    other systems.

perf stat:

  Kim Phillips:

  - Don't report a null stalled cycles per insn metric.

tools headers:

  Arnaldo Carvalho de Melo:

  - Sync tools/ headers with the kernel sources to get things like syscall
    numbers and new arguments so that 'perf trace' can decode and use them in
    tracepoint filters, e.g. prctl's new PR_{G,S}ET_IO_FLUSHER options.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200214172132.GA28389@embeddedorSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200214172022.GA27490@embeddedorSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200214171907.GA26588@embeddedorSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull NFS client bugfixes from Anna Schumaker:
 "The only stable fix this time is the DMA scatter-gather list bug fixed
  by Chuck.

  The rest fix up races and refcounting issues that have been found
  during testing.

  Stable fix:
   - fix DMA scatter-gather list mapping imbalance

  The rest:
   - fix directory verifier races
   - fix races between open and dentry revalidation
   - fix revalidation of dentries with delegations
   - fix "cachethis" setting for writes
   - fix delegation and delegation cred pinning"

* tag 'nfs-for-5.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4: Ensure the delegation cred is pinned when we call delegreturn
  NFSv4: Ensure the delegation is pinned in nfs_do_return_delegation()
  NFSv4.1 make cachethis=no for writes
  xprtrdma: Fix DMA scatter-gather list mapping imbalance
  NFSv4: Fix revalidation of dentries with delegations
  NFSv4: Fix races between open and dentry revalidation
  NFS: Fix up directory verifier races

Pull ceph fixes from Ilya Dryomov:

 - make O_DIRECT | O_APPEND combination work better

 - redo the server path canonicalization patch that went into -rc1

 - fix the 'noacl' mount option that got broken by the conversion to the
   new mount API in 5.5

* tag 'ceph-for-5.6-rc2' of https://github.com/ceph/ceph-client:
  ceph: noacl mount option is effectively ignored
  ceph: canonicalize server path in place
  ceph: do not execute direct write in parallel if O_APPEND is specified

Pull io_uring fixes from Jens Axboe:
 "Here's a set of fixes for io_uring:

   - Various fixes with cleanups from Pavel, fixing corner cases where
     we're not correctly dealing with iovec cleanup.

   - Clarify that statx/openat/openat2 don't accept fixed files

   - Buffered raw device write EOPTNOTSUPP fix

   - Ensure async workers grab current->fs

   - A few task exit fixes with pending requests that grab the file
     table

   - send/recvmsg async load fix

   - io-wq offline node setup fix

   - CQ overflow flush in poll"

* tag 'io_uring-5.6-2020-02-14' of git://git.kernel.dk/linux-block: (21 commits)
  io_uring: prune request from overflow list on flush
  io-wq: don't call kXalloc_node() with non-online node
  io_uring: retain sockaddr_storage across send/recvmsg async punt
  io_uring: cancel pending async work if task exits
  io-wq: add io_wq_cancel_pid() to cancel based on a specific pid
  io-wq: make io_wqe_cancel_work() take a match handler
  io_uring: fix openat/statx's filename leak
  io_uring: fix double prep iovec leak
  io_uring: fix async close() with f_op->flush()
  io_uring: allow AT_FDCWD for non-file openat/openat2/statx
  io_uring: grab ->fs as part of async preparation
  io-wq: add support for inheriting ->fs
  io_uring: retry raw bdev writes if we hit -EOPNOTSUPP
  io_uring: add cleanup for openat()/statx()
  io_uring: fix iovec leaks
  io_uring: remove unused struct io_async_open
  io_uring: flush overflowed CQ events in the io_uring_poll()
  io_uring: statx/openat/openat2 don't support fixed files
  io_uring: fix deferred req iovec leak
  io_uring: fix 1-bit bitfields to be unsigned
  ...

Pull networking fixes from David Miller:

 1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew
    Lunn.

 2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen.

 3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet.

 4) Add some missing netlink attribute validation to matchall and
    flower, from Davide Caratti.

 5) Send icmp responses properly when NAT has been applied to the frame
    before we get to the tunnel emitting the icmp, from Jason Donenfeld.

 6) Make sure there is enough SKB headroom when adding dsa tags for qca
    and ar9331. From Per Forlin.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  netdevice.h: fix all kernel-doc and Sphinx warnings
  net: dsa: tag_ar9331: Make sure there is headroom for tag
  net: dsa: tag_qca: Make sure there is headroom for tag
  net, ip6_tunnel: enhance tunnel locate with link check
  net/smc: no peer ID in CLC decline for SMCD
  net/smc: transfer fasync_list in case of fallback
  net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
  net: hns3: fix VF bandwidth does not take effect in some case
  net: hns3: add management table after IMP reset
  mac80211: fix wrong 160/80+80 MHz setting
  cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
  xfrm: interface: use icmp_ndo_send helper
  wireguard: device: use icmp_ndo_send helper
  sunvnet: use icmp_ndo_send helper
  gtp: use icmp_ndo_send helper
  icmp: introduce helper for nat'd source address in network device context
  net/sched: flower: add missing validation of TCA_FLOWER_FLAGS
  net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS
  net/flow_dissector: remove unexist field description
  page_pool: refill page when alloc.count of pool is zero
  ...

Pull power management fixes from Rafael Wysocki:
 "Fix three issues related to the handling of wakeup events signaled
  through the ACPI SCI while suspended to idle (Rafael Wysocki) and
  unexport an internal cpufreq variable (Yangtao Li)"

* tag 'pm-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system
  ACPICA: Introduce acpi_any_gpe_status_set()
  ACPI: PM: s2idle: Avoid possible race related to the EC GPE
  ACPI: EC: Fix flushing of pending work
  cpufreq: Make cpufreq_global_kobject static

Pull sound fixes from Takashi Iwai:
 "The only common change is the regression fix of the previous PCM fix
  patch for managed buffers while the rest are usual suspects, USB-audio
  and HD-audio device-specific quirks.

  The change for UAC2 clock validation workaround became a bit big, but
  the changes are fairly straightforward"

* tag 'sound-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: pcm: Fix double hw_free calls
  ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000
  ALSA: hda/realtek - Fix silent output on MSI-GL73
  ALSA: hda/realtek - Add more codec supported Headset Button
  ALSA: usb-audio: Apply sample rate quirk for Audioengine D1
  ALSA: usb-audio: Fix UAC2/3 effect unit parsing
  ALSA: usb-audio: Apply 48kHz fixed rate playback for Jabra Evolve 65 headset

Pull drm fixes from Dave Airlie:
 "The core has a build fix for edid code on certain compilers/arches/,
  one MST fix and one vgem fix. Regular amdgpu fixes, and a couple of
  small driver fixes.

  The i915 fixes are bit larger than normal for this stage, but they
  were having CI issues last week, and they hadn't sent any fixes last
  week due to this.

  core:
   - edid build fix

  mst:
   - fix NULL ptr deref

  vgem:
   - fix close after free

  msm:
   - better dma-api usage

  sun4i:
   - disable allow_fb_modifiers

  amdgpu:
   - Additional OD fixes for navi
   - Misc display fixes
   - VCN 2.5 DPG fix
   - Prevent build errors on PowerPC on some configs
   - GDS EDC fix

  i915:
   - dsi/acpi fixes
   - gvt locking and allocation fixes
   - gem/gt fixes
   - bios timing parameters fix"

* tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drm: (50 commits)
  drm/i915: Mark the removal of the i915_request from the sched.link
  drm/i915/execlists: Reclaim the hanging virtual request
  drm/i915/execlists: Take a reference while capturing the guilty request
  drm/i915/execlists: Offline error capture
  drm/i915/gt: Allow temporary suspension of inflight requests
  drm/i915: Keep track of request among the scheduling lists
  drm/i915/gem: Tighten checks and acquiring the mmap object
  drm/i915: Fix preallocated barrier list append
  drm/i915/gt: Acquire ce->active before ce->pin_count/ce->pin_mutex
  drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release
  drm/i915: Stub out i915_gpu_coredump_put
  drm/amdgpu:/navi10: use the ODCAP enum to index the caps array
  drm/amdgpu: update smu_v11_0_pptable.h
  drm/amdgpu: correct comment to clear up the confusion
  drm/amd/display: DCN2.x Do not program DPPCLK if same value
  drm/amd/display: Don't map ATOM_ENABLE to ATOM_INIT
  drm/amdgpu/vcn2.5: fix warning
  drm/amdgpu: limit GDS clearing workaround in cold boot sequence
  drm/amdgpu: fix amdgpu pmu to use hwc->config instead of hwc->conf
  amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags
  ...

On i386:

ERROR: "__udivdi3" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined!
ERROR: "__divdi3" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined!

Fixes: f164be8c ("IB/mlx5: Extend caps stage to handle VAR capabilities")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reported-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RHBZ: 1752437

Before we add a new EA we should check that this will not overflow
the maximum buffer we have available to read the EAs back.
Otherwise we can get into a situation where the EAs are so big that
we can not read them back to the client and thus we can not list EAs
anymore or delete them.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>

It was originally enabled only for SMB3 or later dialects, but
had requests to add it to SMB2.1 mounts as well given the
large number of systems at that dialect level.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: L Walsh <cifs@tlinx.org>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>

Eliminate all kernel-doc and Sphinx warnings in
<linux/netdevice.h>.  Fixes these warnings:

../include/linux/netdevice.h:2100: warning: Function parameter or member 'gso_partial_features' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'name_assign_type' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'mpls_ptr' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_prog' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_bulkq' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device'
../include/linux/netdevice.h:2100: warning: Function parameter or member 'qdisc_hash' not described in 'net_device'
../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string.
../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Per Forlin says:

====================
net: dsa: Make sure there is headroom for tag

Sorry for re-posting yet another time....
I manage to include multiple email-senders and forgot to include cover-letter.
Let's hope everyhthing is in order this time.

Fix two tag drivers to make sure there is headroom for the tag data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Passing tag size to skb_cow_head will make sure
there is enough headroom for the tag data.
This change does not introduce any overhead in case there
is already available headroom for tag.
Signed-off-by: Per Forlin <perfn@axis.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Passing tag size to skb_cow_head will make sure
there is enough headroom for the tag data.
This change does not introduce any overhead in case there
is already available headroom for tag.
Signed-off-by: Per Forlin <perfn@axis.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With ipip, it is possible to create an extra interface explicitly
attached to a given physical interface:

  # ip link show tunl0
  4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ipip 0.0.0.0 brd 0.0.0.0
  # ip link add tunl1 type ipip dev eth0
  # ip link show tunl1
  6: tunl1@eth0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ipip 0.0.0.0 brd 0.0.0.0

But it is not possible with ip6tnl:

  # ip link show ip6tnl0
  5: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/tunnel6 :: brd ::
  # ip link add ip6tnl1 type ip6tnl dev eth0
  RTNETLINK answers: File exists

This patch aims to make it possible by adding link comparaison in both
tunnel locate and lookup functions; we also modify mtu calculation when
attached to an interface with a lower mtu.

This permits to make use of x-netns communication by moving the newly
created tunnel in a given netns.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'sti-dt-for-5.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/fixes

STi dt fixes:
-------------
  - remove deprecated Synopsys PHY dt properties
  - fix sound frame-inversion property

* tag 'sti-dt-for-5.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
  ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi
  ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260

Link: https://lore.kernel.org/r/afe20a6d-061b-a93c-2e60-206b0e8d0f81@st.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'mac80211-for-net-2020-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just a few fixes:
 * avoid running out of tracking space for frames that need
   to be reported to userspace by using more bits
 * fix beacon handling suppression by adding some relevant
   elements to the CRC calculation
 * fix quiet mode in action frames
 * fix crash in ethtool for virt_wifi and similar
 * add a missing policy entry
 * fix 160 & 80+80 bandwidth to take local capabilities into
   account
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Karsten Graul says:

====================
net/smc: fixes for -net

Fix a syzbot finding and a problem with the CLC handshake content.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Just SMCR requires a CLC Peer ID, but not SMCD. The field should be
zero for SMCD.

Fixes: c758dfdd ("net/smc: add SMC-D support in CLC messages")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SMC does not work together with FASTOPEN. If sendmsg() is called with
flag MSG_FASTOPEN in SMC_INIT state, the SMC-socket switches to
fallback mode. To handle the previous ioctl FIOASYNC call correctly
in this case, it is necessary to transfer the socket wait queue
fasync_list to the internal TCP socket.

Reported-by: syzbot+4b1fe8105f8044a26162@syzkaller.appspotmail.com
Fixes: ee9dfbef ("net/smc: handle sockopts forcing fallback")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:

====================
net: hns3: fixes for -net

This series includes three bugfixes for the HNS3 ethernet driver.

[patch 1] fixes a management table lost issue after IMP reset.
[patch 2] fixes a VF bandwidth configuration not work problem.
[patch 3] fixes a problem related to IPv6 address copying.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The IPv6 address defined in struct in6_addr is specified as
big endian, but there is no specified endian in struct
hclge_fd_rule_tuples, so it  will cause a problem if directly
use memcpy() to copy ipv6 address between these two structures
since this field in struct hclge_fd_rule_tuples is little endian.

This patch fixes this problem by using be32_to_cpu() to convert
endian of IPv6 address of struct in6_addr before copying.

Fixes: d93ed94f ("net: hns3: add aRFS support for PF")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When enabling 4 TC after setting the bandwidth of VF, the bandwidth
of VF will resume to default value, because of the qset resources
changed in this case.

This patch fixes it by using a fixed VF's qset resources according to
HNAE3_MAX_TC macro.

Fixes: ee9e4424 ("net: hns3: add support for configuring bandwidth of VF on the host")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the current process, the management table is missing after the
IMP reset. This patch adds the management table to the reset process.

Fixes: f5aac71c ("net: hns3: add manager table initialization for hardware")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before this patch:

  # ./perf test 39 41
  39: LLVM search and compile                               :
  39.1: Basic BPF llvm compile                              : Ok
  39.2: kbuild searching                                    : FAILED!
  39.3: Compile source for BPF prologue generation          : Skip
  39.4: Compile source for BPF relocation                   : Skip
  41: BPF filter                                            :
  41.1: Basic BPF filtering                                 : Ok
  41.2: BPF pinning                                         : Ok
  41.3: BPF prologue generation                             : FAILED!
  41.4: BPF relocation checker                              : Skip
  #

Using 'perf test -v' for these tests shows that it is not finding
uapi/linux/fs.h, which ends up being because we don't setup the right header
path. Fix it.

After this patch:

  # perf test 39 41
  39: LLVM search and compile                               :
  39.1: Basic BPF llvm compile                              : Ok
  39.2: kbuild searching                                    : Ok
  39.3: Compile source for BPF prologue generation          : Ok
  39.4: Compile source for BPF relocation                   : Ok
  41: BPF filter                                            :
  41.1: Basic BPF filtering                                 : Ok
  41.2: BPF pinning                                         : Ok
  41.3: BPF prologue generation                             : Ok
  41.4: BPF relocation checker                              : Ok
  #

Longer description:

In llvm-utils.c we use some techniques to obtain the kbuild make
directives and that recently stopped working as now 'ar' gets called and
expects to find the dummy.o used to echo these variables:

  $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)

Add the $(CC) line to satisfy that, making sure this works with all
kernels, i.e. preserving the temp directory and files in it used for
this technique we can see that it works everywhere:

  # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean
  # ls -la /tmp/tmp.qgaFHgxjZ4/
  total 4
  drwx------.  2 root root   80 Feb 14 09:42 .
  drwxrwxrwt. 47 root root 1200 Feb 14 09:42 ..
  -rw-r--r--.  1 root root    0 Feb 13 17:14 dummy.c
  -rw-r--r--.  1 root root  121 Feb 13 17:14 Makefile
  #
  # cat /tmp/tmp.qgaFHgxjZ4/Makefile
  obj-y := dummy.o
  $(obj)/%.o: $(src)/%.c
          @echo -n "$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)"
          $(CC) -c -o $@ $<
  #

Then build with an old kernel Makefile:

  # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o
  -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I./arch/x86/include -I./arch/x86/include/generated  -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h
  #
  # ls -la /tmp/tmp.qgaFHgxjZ4/
  total 8
  drwx------.  2 root root  100 Feb 14 09:43 .
  drwxrwxrwt. 47 root root 1200 Feb 14 09:43 ..
  -rw-r--r--.  1 root root    0 Feb 13 17:14 dummy.c
  -rw-r--r--.  1 root root  936 Feb 14 09:43 dummy.o
  -rw-r--r--.  1 root root  121 Feb 13 17:14 Makefile
  #

And a new one:

  # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean
  # ls -la /tmp/tmp.qgaFHgxjZ4/
  total 4
  drwx------.  2 root root   80 Feb 14 09:43 .
  drwxrwxrwt. 47 root root 1200 Feb 14 09:43 ..
  -rw-r--r--.  1 root root    0 Feb 13 17:14 dummy.c
  -rw-r--r--.  1 root root  121 Feb 13 17:14 Makefile
  # make -s -C /lib/modules/5.6.0-rc1+/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o
   -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
  #
  # ls -la /tmp/tmp.qgaFHgxjZ4/
  total 16
  drwx------.  2 root root  160 Feb 14 09:44 .
  drwxrwxrwt. 47 root root 1200 Feb 14 09:44 ..
  -rw-r--r--.  1 root root  158 Feb 14 09:44 built-in.a
  -rw-r--r--.  1 root root  149 Feb 14 09:44 .built-in.a.cmd
  -rw-r--r--.  1 root root    0 Feb 13 17:14 dummy.c
  -rw-r--r--.  1 root root  936 Feb 14 09:44 dummy.o
  -rw-r--r--.  1 root root  121 Feb 13 17:14 Makefile
  -rw-r--r--.  1 root root    0 Feb 14 09:44 modules.order
  #
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: https://www.spinics.net/lists/linux-perf-users/msg10600.htmlSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>