- 27 Jan, 2014 6 commits
-
-
Ville Syrjälä authored
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Many times in the past we have concluded that the cause of the GPU hang has been that the hw status page was stale, usually because the GPU and CPU disagreed over the address of the page. Having stumbled across yet another issue that seems to be related to the HWSP, it is time to include that information in the GPU error dump. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Through a twisty and circuituous path it is possible to currently trick the code into creating a default context and forgetting to pin it immediately into the GGTT. (This requires a system using contexts without an aliasing ppgtt, which is currently restricted to Baytrails machines manually specifying a module parameter to force enable contexts, or on Sandybridge and later that manually disable the aliasing ppgtt.) The consequence is that during module unload we attempt to unpin the default context twice and encounter a BUG remonstrating that we attempt to unpin an unbound object. [ 161.002869] Kernel BUG at f84861f8 [verbose debug info unavailable] [ 161.002875] invalid opcode: 0000 [#1] SMP [ 161.002882] Modules linked in: coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw gf128mul ablk_helper cryptd hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_magn_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event dm_multipath scsi_dh asix ppdev usbnet snd_rawmidi mii hid_sensor_hub microcode snd_seq rfcomm bnep snd_seq_device bluetooth snd_timer snd parport_pc binfmt_misc soundcore dw_dmac_pci dw_dmac_core mac_hid lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915(O-) drm_kms_helper(O) igb dca ptp pps_core i2c_algo_bit drm(O) ahci libahci video [ 161.002991] CPU: 0 PID: 2114 Comm: rmmod Tainted: G W O 3.13.0-rc8+ #2 [ 161.002997] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS 5.6.5 09/24/2013 [ 161.003004] task: dbdd6800 ti: dbe0e000 task.ti: dbe0e000 [ 161.003010] EIP: 0060:[<f84861f8>] EFLAGS: 00010246 CPU: 0 [ 161.003044] EIP is at i915_gem_object_ggtt_unpin+0x88/0x90 [i915] [ 161.003050] EAX: dfce3840 EBX: 00000000 ECX: dfafd690 EDX: dfce3874 [ 161.003056] ESI: c0086b40 EDI: df962e00 EBP: dbe0fe1c ESP: dbe0fe0c [ 161.003062] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 161.003068] CR0: 8005003b CR2: b7718000 CR3: 1bec0000 CR4: 001007f0 [ 161.003076] Stack: [ 161.003081] 00afc014 00000004 c0086b40 dfafc000 dbe0fe38 f8487e5a dfaa5400 c0086b40 [ 161.003099] dfafc000 dfaa5400 dfaa5414 dbe0fe58 f84741aa 00000000 f89c34b9 dfaa5414 [ 161.003117] dfaa5400 dfaa5400 f644b000 dbe0fe6c f89a5443 dfaa5400 f8505000 f644b000 [ 161.003134] Call Trace: [ 161.003169] [<f8487e5a>] i915_gem_context_fini+0xba/0x1c0 [i915] [ 161.003202] [<f84741aa>] i915_driver_unload+0x1fa/0x2f0 [i915] [ 161.003232] [<f89a5443>] drm_dev_unregister+0x23/0x90 [drm] [ 161.003259] [<f89a54ed>] drm_put_dev+0x3d/0x70 [drm] [ 161.003294] [<f8470615>] i915_pci_remove+0x15/0x20 [i915] [ 161.003306] [<c1338a6f>] pci_device_remove+0x2f/0xa0 [ 161.003317] [<c140c871>] __device_release_driver+0x61/0xc0 [ 161.003328] [<c140d12f>] driver_detach+0x8f/0xa0 [ 161.003341] [<c140c54f>] bus_remove_driver+0x4f/0xc0 [ 161.003353] [<c140d708>] driver_unregister+0x28/0x60 [ 161.003362] [<c10cee42>] ? stop_cpus+0x32/0x40 [ 161.003372] [<c10bd510>] ? module_refcount+0x90/0x90 [ 161.003383] [<c13378c5>] pci_unregister_driver+0x15/0x60 [ 161.003413] [<f89a739f>] drm_pci_exit+0x9f/0xb0 [drm] [ 161.003458] [<f84e624a>] i915_exit+0x1b/0x1d [i915] [ 161.003468] [<c10bf8a8>] SyS_delete_module+0x158/0x1f0 [ 161.003480] [<c1173d5d>] ? ____fput+0xd/0x10 [ 161.003488] [<c106f0fe>] ? task_work_run+0x7e/0xb0 [ 161.003499] [<c165a68d>] sysenter_do_call+0x12/0x28 [ 161.003505] Code: 0f b6 4d f3 8d 51 0f 83 e1 f0 83 e2 0f 09 d1 84 d2 88 48 54 75 07 80 a7 91 00 00 00 7f 83 c4 04 5b 5e 5f 5d c3 8d b6 00 00 00 00 <0f> 0b 8d b6 00 00 00 00 55 89 e5 57 56 53 83 ec 64 3e 8d 74 26 [ 161.003586] EIP: [<f84861f8>] i915_gem_object_ggtt_unpin+0x88/0x90 [i915] SS:ESP 0068:dbe0fe0c v2: Rename the local variable (is_default_ctx) to avoid confusion with the function is_default_ctx(). And correct Jesse's email address. Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73985Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> [danvet: Fix up the rebase fail from my first attempt, thankfully pointed out by Ville.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Rodrigo Vivi authored
This debugfs interface will allow intel-gpu-tools test case to verify if screen has been updated properly on cases like PSR. v2: Accepted all Daniel's suggestions: * grab modeset lock * loop over connector and check DPMS on * return errors * use _eDP1 suffix for easy future extension * don't cache crc_supported neither latest crc * return crc as a full array and read it at once with aux. * use 0 to turn TEST_SINK off. * split the drm_helpers definitions in another patch. v3: Accepted 2 Damien's suggestion: remove h from printf hexa and return ENODEV when eDP not present instead of EAGAIN. v4: Accepted 2 Jani' s suggestion: 1 path for unlock and remove _retry from aux read. v5: removing last missing useless _retry (by Damien) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Rodrigo Vivi authored
This address will be used to verify panel CRC for test and validation purposes. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> [danvet: Fix whitespace fail.] Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 25 Jan, 2014 14 commits
-
-
Ville Syrjälä authored
Having a 4 byte register at 0x321b seems unlikely as that's not 4 byte aligned. Since later platforms have more or less the same FBC registers with new names, assume that FBC_FENCE_OFF is at 0x3218 just like DPFC_FENCE_YOFF. This feels like a simple typo in BSpec. 321Bh looks a lot like 3218h after all. Should still be tested on real hardware of course. But I don't have any mobile gen4 systems. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The debug message telling FBC1 has been enabled is missing a newline. Add it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
On CTG and IVB+ we don't try to preserve any bits from the DPFC_CONTROL register. Follow suit on ILK/SNB. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
We will anyway re-enable FBC normally after resume, so trying to save and restore the register makes little sense. We do need to preserve the FBC1 interval bits in FBC_CONTROL since we only initialize them during driver load, and try to preserve them after that. v2: s/I915_HAS_FBC/HAS_FBC/ and fix the check for gen4 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
We set up all the bits for DPFC_CONTROL but forgot to actually write them to the register. Oops. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Make the FBC plane macros take the plane as a parameter. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The ILK/SNB docs don't really mention the the DPFC_HT_MODIFY bit. CTG docs clearly state that it should be set only when tracking back buffer modification in persistent mode. The bit is supposed to be set by software after the first CPU modification to the back buffer, and it would get automagically cleared by the hardware on the next page flip. Since we only track front buffer modification we don't need to set this bit. GTT modification tracking still appears to work on ILK and SNB with the bit unset. I don't have a CTG to verify how that behaves. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The ILK/SNB docs are a bit unclear what the persistent mode does, but the CTG docs clearly state that it was meant to be used when we're tracking back buffer modifications. We never do that, so leave it in non-persistent mode. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
We use nuking instead of render tracking on IVB+, so there's no point in writing IVB_FBC_RT_BASE. v2: Drop the IVB_FBC_RT_BASE write too v3: Move the SNB stuff elsewhere, leaving only IVB+ here Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Because whatever.* * This should contain a fairly long list of issues and still unresolved resgressions, but I didn't really get a vote. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
I want to see these without having full debugs enabled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: fix the gen8 irq handler as spotted by Paulo in his review.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Currently we print all pipe underruns on GMCH platforms. Hook up the same logic we use on PCH platforms where we disable the underrun reporting after the first underrun. Underruns don't actually generate interrupts themselves on GMCH platforms, we just can detect them whenever we service other interrupts. So we don't have any enable bits to worry about. We just need to remember to clear the underrun status when enabling underrun reporting. Note that the underrun handling needs to be moved to the non-locked pipe_stats[] loop in the interrupt handlers to avoid having to rework the locking in intel_set_cpu_fifo_underrun_reporting(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
This is useful for debugging as we then know that the first entry is always the global GTT, and all later entries the per-process GTT VM. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 24 Jan, 2014 20 commits
-
-
Jesse Barnes authored
Forgot to convert to using the refclk variable when I added refclk readout support, and Paulo noticed the resulting calculation was off due to the way p & r are stored. Reported-by: Paulo Zanoni <przanoni@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
This statenment became false here: commit 4fc688ce Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Nov 2 11:14:01 2012 -0700 drm/i915: protect RPS/RC6 related accesses (including PCU) with a new mutex Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
Now that we have DDI support, we can check these all the time. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
Read out and calculate the port and pixel clocks on DDI configs as well. This means we have to grab the DP divider values and look at the port mapping to figure out which clock select reg to read out. v2: do the work from ddi_get_config (Ville) v3: check WRPLL reference clock (Ville) add additional SPLL freqs (Ville) clean up port/crtc clock calc (Ville) fix up crtc_clock conditionals (Ville) drop superfluous dp_get_m_n from get_config (Ville) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Damien Lespiau authored
We need a bit more flexibility here in the future, bits get shuffled around. v2: more descriptive commit message (Jani Nikula) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Damien Lespiau authored
So it's easier to compare what we program with the documentation, not having to jump at all. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Damien Lespiau authored
Also, move that computation outside of the for loop that tries 5 times, this value doesn't change between tries. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Damien Lespiau authored
A tiny clean-up to allow better code separation between platforms. v2: Fix comment placement (put in in i9xx_get_aux_clock_divider()) and nuke the outdated PCH eDP comment (Jani Nikula) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jani Nikula authored
Since commit ee1452d7 Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Sep 20 15:05:30 2013 +0300 drm/i915: assume all GM45 Acer laptops use inverted backlight PWM failed and was later reverted in commit be505f64 Author: Alexander van Heukelum <heukelum@fastmail.fm> Date: Sat Dec 28 21:00:39 2013 +0100 Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM" fix the individual broken machine instead. Note to backporters: http://patchwork.freedesktop.org/patch/17837/ is the patch you want for 3.13 and older. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54171 Reference: http://mid.gmane.org/DUB115-W7628C7C710EA51AA110CD4A5000@phx.gbl CC: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Patch mangling for 3.14 plus adding the link to the original for 3.13.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jani Nikula authored
It's unused, and nowadays specifying unknown parameters no longer prevents modules from being loaded. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Todd Previte authored
For HSW+ platforms, enable the 5.4Ghz (HBR2) link rate for devices that support it. The sink device must report that is supports Displayport 1.2 and the HBR2 bit rate in the DPCD in order to use HBR2. Signed-off-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Group the sprite register writes a bit tighter. We want to write the registers atomically, and so doing the base address/offset artihmetic within the critical section is pointless when it can all be done beforehand. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Currently we're doing the reset handling a bit late, and we're doing it both in the driver load code and on resume. This makes it unusable for e.g. resetting the panel power sequence state like Paulo wants to. Instead of adding yet another single-use callback shuffle things around: - Output handling code is responsible to reset/init all state on its own at driver load time. - We call the reset functions much earlier, before we start using any of the modeset code. Compared to Paulo's new ->resume callback the only difference in placement is that ->reset is still called without dev->struct_mutex held. Which is imo a feature. v2: Rebase on top of the now merge dinq. Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Because we already do the wait in software: see ironlake_wait_backlight_on and ironlake_edp_wait_backlight_off. For the "backlight on" delay, even BSpec says we need to program 0x1 to PP_ON_DELAYS 12:0. For the "backlight off" delay, if we don't do the same thing, when we call ironlake_wait_panel_off we'll end up waiting for the it again. On my machine the off delay is 200ms, so we save this amount of time whenever we disable the panel (e.g, suspend). Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
I forgot to set new_config and new_enabled appropriately in the load detect code. Fix it up. v2: Handle the other error path in intel_get_load_detect_pipe() too (Imre) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Not sure anyone cares about this information. I suppose most people would just look at /proc/interrupts instead. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
irq_received is used as a boolean in i965_irq_handler(), so make it bool. This also makes i965_irq_handler() closer to i915_irq_handler(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewd-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Add intel_hpd_irq_uninstall() which will cancel the hotplug re-enable timer. Also s/i915_reenable_hotplug_timer_func/intel_hpd_irq_reenable/ Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Function ironlake_wait_panel_off should just wait for the power off delay, while function ironlake_wait_panel_power_cycle should wait for the panel cycle (that's required after we turn the panel off, before we enable it again). The problem is that, currently, ironlake_wait_panel_off is waiting not just for the panel to be off, but also for the power cycle delay and the backlight off delay. This function relies on the PP_STATUS bits 3:0, which are not documented and not supposed to be used. A quick analysis of the values we get while waiting quickly shows that power off is reached while bits 3:0 are still 0x1, and the time it takes to become 0x0 is the power cycle delay. On my system with backlight off delay of 200ms, power down delay of 50ms and power cycle delay of 500ms, this is what I get: - Start waiting with value 0x80000008, timestamp 6.429364. - Jumps to 0xa0000003, timestamp 6.431360 (time waited: 0.001996) - Jumps to 0xa0000002, timestamp 6.631277 (time waited: 0.201913) - Jumps to 0x08000001, timestamp 6.681258 (time waited: 0.251894) - Jumps to 0x00000000, timestamp 7.192012 (time waited: 0.762648) As you can see, ironlake_wait_panel_off is sleeping 760ms instead of the expected 50ms: the first 200ms matches the backlight off delay (which we should already have waited for!), then the 50ms for the real panel off delay, then the 500ms for the panel power cycle. This patch makes is look just at bits 31 and 29:28, which will ignore the panel power cycle. And just to be clear: this saves 500ms on my system every time we disable the panel. But we can still save 200ms more (the backlight off delay) on the next patches. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuougseek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
I like how the macros are nicely column-aligned, so we can properly compare what each macro waits for, but a column full of zeroes doesn't really help anything: it just makes the lines bigger, and they're already way past 80 columns. I imagine this column was used in the past, but IMHO now we can get rid of it. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-