- 11 Jun, 2019 22 commits
-
-
Neil Armstrong authored
Add compatible for the Amlogic G12B (S922X) SoC based Odroid-N2 SBC from HardKernel. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com>
-
Neil Armstrong authored
Add compatible for the Amlogic G12B SoC, sharing most of the features and architecture with the G12A SoC. Signed-off-by:
-
Neil Armstrong authored
Add the external ethernet PHY interrupt on the Vega S95 board. Suggested-by:
Christian Hewitt <christianshewitt@gmail.com> Signed-off-by:
-
Neil Armstrong authored
Fix the SDIO WiFi support and add proper Bluetooth support on the Vega S95 board. Suggested-by:
-
Neil Armstrong authored
Add SARARC node and associated regulator to support reading the ADC inputs on the Vega S95 Suggested-by:
-
Neil Armstrong authored
Add CEC nodes to support CEC communication on Vega S95 Suggested-by:
-
Neil Armstrong authored
Add HDMI nodes to support graphics on Vega S95 Suggested-by:
-
Neil Armstrong authored
Align the regulator names with other GXBB SoCS for upcoming SARADC support and SDIO/SDCard fixes. Also fix how regulators are passed to MMC controllers & USB. Suggested-by:
-
Christian Hewitt authored
This enables Bluetooth support for the following models: AP6335 in the WeTek Hub rev1 - BCM4335C0.hcd AP6255 in the WeTek Hub rev2 - BCM4345C0.hcd AP6330 in the WeTek Play 2 - BCM4330B1.hcd Signed-off-by:
-
Christian Hewitt authored
Enable SARADC on Wetek Boards. Signed-off-by:
-
Christian Hewitt authored
- Remove serial1 alias - Add support for uart_A rts/cts - Add bluetooth uart_A subnode qith shutdown gpio Fixes: b8b74dda ("ARM64: dts: meson-gxm: Add support for Khadas VIM2") Signed-off-by:
-
Christian Hewitt authored
Fix DTC warnings: meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Fixes: b8b74dda ("ARM64: dts: meson-gxm: Add support for Khadas VIM2") Signed-off-by:
-
Neil Armstrong authored
Enable the network interface of the X96 Mac using an external Realtek RTL8211F gigabit PHY, needing the same broken-eee properties as the previous Amlogic SoC generations. Signed-off-by:
-
Neil Armstrong authored
The Amlogic G12A has the hwrng module at the end of an unknown "EFUSE" bus. The hwrng is not enabled on the vendor G12A DTs, but is enabled on next generation SM1 SoC family sharing the exact same memory mapping. Let's add the "EFUSE" bus and the hwrng node. This hwrng has been checked with the rng-tools rngtest FIPS tool : rngtest: starting FIPS tests... rngtest: bits received from input: 1630240032 rngtest: FIPS 140-2 successes: 81436 rngtest: FIPS 140-2 failures: 76 rngtest: FIPS 140-2(2001-10-10) Monobit: 10 rngtest: FIPS 140-2(2001-10-10) Poker: 6 rngtest: FIPS 140-2(2001-10-10) Runs: 26 rngtest: FIPS 140-2(2001-10-10) Long run: 34 rngtest: FIPS 140-2(2001-10-10) Continuous run: 0 rngtest: input channel speed: (min=3.784; avg=5687.521; max=19073.486)Mibits/s rngtest: FIPS tests speed: (min=47.684; avg=52.348; max=52.835)Mibits/s rngtest: Program run time: 30000987 microseconds Signed-off-by:
-
Jerome Brunet authored
After discussing with Amlogic, the Synopsys GMAC version used by the gx and axg family is the 3.70a. Set this is in DT Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
-
Neil Armstrong authored
With the X96 Max board using an external Gigabit Ethernet PHY, add the same driver strength to the Ethernet pins as the vendor tree. Signed-off-by:
-
Neil Armstrong authored
With the default boot settings, the DDC drive strength is too weak, set the driver-strengh to 4mA to avoid errors on the DDC line. Signed-off-by:
-
Jerome Brunet authored
Enable the network interface of the SEI510 which use the internal PHY. Tested-by:
-
Jerome Brunet authored
The u200 is the main mother board for the S905D2. It can provide both the internal and external network. However, by default the resistance required for the external RGMII bus are not fitted, so enable the internal PHY. Signed-off-by:
-
Jerome Brunet authored
Add the g12a mdio multiplexer which allows to connect to either an external phy through the SoC pins or the internal 10/100 phy Signed-off-by:
-
Jerome Brunet authored
Add the ethernet pinctrl settings for RMII, RGMII and internal phy leds Signed-off-by:
-
https://github.com/BayLibre/clk-mesonKevin Hilman authored
MPLL50M DT bindings typo fix Meson9 VPU typo fixes # gpg: Signature made Tue 11 Jun 2019 05:02:13 AM PDT # gpg: using RSA key F4E159AE18F3F56D5F1BB71BE6FC0F1C37F2DA85 # gpg: Good signature from "Jerome Brunet <jbrunet@baylibre.com>" [full] # gpg: aka "Jerome Brunet <jerome@liltaz.com>" [full] # gpg: aka "Jerome Brunet <jerome.brunet@gmail.com>" [full] * tag 'clk-meson-5.2-1-fixes' of https://github.com/BayLibre/clk-meson: clk: meson: meson8b: fix a typo in the VPU parent names array variable clk: meson: fix MPLL 50M binding id typo
-
- 23 May, 2019 1 commit
-
-
Jerome Brunet authored
Add the synopsys ethernet mac controller embedded in the g12a SoC family. Signed-off-by:
-
- 21 May, 2019 17 commits
-
-
Jerome Brunet authored
Add the hdmitx glue device linking the SoC audio interfaces to the embedded Synopsys hdmi controller. Signed-off-by:
-
Jerome Brunet authored
Add bluetooth vbat and vddio power supplies Signed-off-by:
-
Rob Herring authored
Convert Amlogic SoC bindings to DT schema format using json-schema. Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by:
-
Rob Herring authored
It is best practice to have 1 binding per file, so board level bindings should be separate for various misc SoC bindings. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Signed-off-by:
-
Jerome Brunet authored
At the moment the sysnopsys hdmi i2s driver provides a single playback DAI. Add the corresponding sound-dai-cell to the hdmi device node. Signed-off-by:
-
Jerome Brunet authored
Add the spdif input device node and the pinctrl definition for this capture interface g12a SoC family Signed-off-by:
-
Jerome Brunet authored
Add the pdm device node and the pinctrl definition for this capture interface g12a SoC family Signed-off-by:
-
Jerome Brunet authored
Add the devices nodes and pinctrl definitions for the spdif outputs of the g12a SoC family Signed-off-by:
-
Jerome Brunet authored
Add the devices and pinctrl definitions for the tdm interfaces of the g12a SoC family. Signed-off-by:
-
Jerome Brunet authored
Add the playback and capture memory interfaces of the g12a SoC family. Signed-off-by:
-
Jerome Brunet authored
Add the audio DDR memory arbitrer of the g12a SoC family. Signed-off-by:
-
Jerome Brunet authored
Add the g12a clock controller dedicated to audio. Signed-off-by:
-
Jerome Brunet authored
Add the i2c bus used for RGB led controller. Signed-off-by:
-
Jerome Brunet authored
Add the 3 i2c busses present on the u200 reference design. Signed-off-by:
-
Guillaume La Roque authored
Add pinctrl and nodes for i2c support on amlogic g12a Signed-off-by:
Guillaume La Roque <glaroque@baylibre.com> Signed-off-by:
-
Jerome Brunet authored
Now that the AO clock controller is available, make the uarts of the always-on domain claim the appropriate peripheral clock. Signed-off-by:
-
Jerome Brunet authored
Enable eMMC and SDCard on the g12a sei510 board Signed-off-by:
-
