Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Support 512 byte ECC calculation

[FM: updated two comments]
Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

It doesn't use LINUX_VERSION_CODE nor KERNEL_VERSION.

This patch removes the said #include <version.h>.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

[Reported by Randy Dunlap]
Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

This patch for nand_ecc.c fixes three issues

- fix code so it also works on big endian architectures
- added a printk in case of an uncorrectable ecc error
- strengthen the test for correctable errors (decreasing the chance
  that multiple bit faults by accident will be seen as correctable)

Note: the big endian code is only tested in a testbed (running on big endian
hardware) as I cannot rebuild and test a big endian kernel at the moment.
However the only thing that can go wrong is if <asm/byteorder.h> does not
give __BIG_ENDIAN in that case. In my eyes very unlikely.
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/mtd/maps/amd76xrom.c
  drivers/mtd/maps/ck804xrom.c
  drivers/mtd/maps/esb2rom.c

This patch removes the said #include <version.h>.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Make the standalone stuff a little cleaner, fix some checkpatch warnings.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

This patch improves the performance of the ecc generation code by a 
factor of 18 on an INTEL D920 CPU, a factor of 7 on MIPS and a factor of 5 
on ARM (NSLU2)
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

On OMAP3, the driver was occasionally not seeing the GPIO
interrupt.  Adding a small delay of one register read
eliminates the problem.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Conflicts:

	include/asm-arm/arch-omap/onenand.h

This driver had resided in the OMAP tree but is now to be in MTD.

Original authors were:
	Jarkko Lavinen <jarkko.lavinen@nokia.com> and Juha Yrjölä
	IRQ and DMA support written by Timo Teras
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: tc6393 cleanup and update
  mfd: have TMIO drivers and subdevices depend on ARM
  mfd: TMIO MMC driver
  mfd: driver for the TMIO NAND controller
  mfd: t7l66 MMC platform data
  mfd: tc6387 MMC platform data
  mfd: Fix 7l66 and 6387 according to the new mfd-core API
  mfd: Fix tc6393 according to the new tmio.h
  mfd: driver for the TC6387XB TMIO controller.
  mfd: driver for the T7L66XB TMIO SoC
  mfd: TMIO MMC structures and accessors.

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (lm75) Drop legacy i2c driver
  i2c: correct some size_t printk formats
  i2c: Check for address business before creating clients
  i2c: Let users select algorithm drivers manually again
  i2c: Fix NULL pointer dereference in i2c_new_probed_device
  i2c: Fix oops on bus multiplexer driver loading

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] pcwd.c - fix open_allowed type.
  [WATCHDOG] fix watchdog/ixp4xx_wdt.c compilation
  [WATCHDOG] fix watchdog/wdt285.c compilation
  [WATCHDOG] fix watchdog/at91rm9200_wdt.c compilation
  [WATCHDOG] fix watchdog/shwdt.c compilation
  [WATCHDOG] fix watchdog/txx9wdt.c compilation
  [WATCHDOG] MAINTAINERS: remove ZF MACHZ WATCHDOG entry
  [WATCHDOG] Fix build with CONFIG_ITCO_VENDOR_SUPPORT=n

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Remove include/linux/harrier_defs.h
  powerpc: Do not ignore arch/powerpc/include
  powerpc: Delete completed "ppc removal" task from feature removal file
  powerpc/mm: Fix attribute confusion with htab_bolt_mapping()
  powerpc/pci: Don't keep ISA memory hole resources in the tree
  powerpc: Zero fill the return values of rtas argument buffer
  powerpc/4xx: Update defconfig files for 2.6.27-rc1
  powerpc/44x: Incorrect NOR offset in Warp DTS
  powerpc/44x: Warp DTS changes for board updates
  powerpc/4xx: Cleanup Warp for i2c driver changes.
  powerpc/44x: Adjust warp-nand resource end address

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Limit VPD length for Broadcom 5708S
  PCI PM: Export pci_pme_active to drivers
  PCI: remove duplicate symbol from pci_ids.h
  PCI: check the return value of device_create_bin_file() in pci_create_bus()
  PCI: fully restore MSI state at resume time
  DMA: make dma-coherent.c documentation kdoc-friendly
  PCI: make pci_register_driver() a macro
  PCI: add Broadcom 5708S to VPD length quirk

While testing our KVM code for s390 (starting and killall kvm in a loop)
I can reproduce the following oops:

  Unable to handle kernel pointer dereference at virtual kernel address 6b6b6b6b6b6b6000 Oops: 0038 [#1] SMP
  Modules linked in: dm_multipath sunrpc qeth_l3 qeth_l2 dm_mod qeth
  ccwgroup CPU: 1 Not tainted 2.6.27-rc1 #54
  Process kuli (pid: 4409, task: 00000000b6aa5940, ksp: 00000000b7343e10)
  Krnl PSW : 0704e00180000000 00000000002e0b8c
  (disassociate_ctty+0x1c0/0x288) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3
  CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000000 6b6b6b6b6b6b6b6b
  0000000000000001 00000000000003a6 00000000002e0a46 00000000004b4160
  0000000000000001 00000000bbd79758 00000000b7343e58 00000000b8854148
  00000000bd34dea0 00000000b7343c20 0000000000000001 00000000004b6d08
  00000000002e0a46 00000000b7343c20 Krnl Code: 00000000002e0b7e:
  eb9fb0a00004	lmg	%r9,%r15,160(%r11) 00000000002e0b84:
  07f4		bcr	15,%r4 00000000002e0b86:
  e31090080004	lg	%r1,8(%r9) >00000000002e0b8c:
  d501109cd000	clc	156(2,%r1),0(%r13) 00000000002e0b92:
  a784ff5d		brc	8,2e0a4c 00000000002e0b96:
  b9040029		lgr	%r2,%r9 00000000002e0b9a:
  c0e5fffff9c3	brasl	%r14,2dff20 00000000002e0ba0:
  a7f4ff56		brc	15,2e0a4c Call Trace:
  ([<00000000002e0a46>] disassociate_ctty+0x7a/0x288)
   [<0000000000141fe6>] do_exit+0x212/0x8d4
   [<0000000000142708>] do_group_exit+0x60/0xcc
   [<0000000000150660>] get_signal_to_deliver+0x270/0x3ac
   [<000000000010bfd6>] do_signal+0x8e/0x8dc
   [<0000000000113772>] sysc_sigpending+0xe/0x22
   [<000001ff0000b134>] 0x1ff0000b134
  INFO: lockdep is turned off.
  Last Breaking-Event-Address:
   [<00000000002e0a48>] disassociate_ctty+0x7c/0x288
  Kernel panic - not syncing: Fatal exception: panic_on_oops

It seems that tty was already free in disassocate_ctty when it tries
to dereference tty->driver.

After moving the lock_kernel before the mutex_unlock, I can no longer
reproduce the problem.

[ This is a temporary partial fix for the documented and long standing
  race in disassociate_tty.  This stops most problem cases for now.

  For the next release the -next tree has an initial implementation of
  kref counting for tty structures and this quickfix will be dropped.

                                                              - Alan ]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by; Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wire up for m68k{,nommu} the system calls that were added in the last merge
window:

 - 4006553b ("flag parameters: inotify_init")
 - ed8cae8b ("flag parameters: pipe")
 - 336dd1f7 ("flag parameters: dup2")
 - a0998b50 ("flag parameters: epoll_create")
 - 9fe5ad9c ("flag parameters add-on: remove
						 epoll_create size param")
 - b087498e ("flag parameters: eventfd")
 - 9deb27ba ("flag parameters: signalfd")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 2d04a4a7, which made
it impossible to make the softcursor use the highlight colors.

Yes, the fourth bit should be "blinking", but since we cannot reasonably
blink in fbcon, highlighting it with a bright background is preferable.
Reported-by: Pavel Machek <pavel@suse.cz>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Antonino A. Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- add extended device information support
- add s25sl128 device support
Signed-off-by: Chen Gong <g.chen@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

code cleanup for m25p80.c
Signed-off-by: Chen Gong <g.chen@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

This patch adds an erase_block command to enhance erase operation
Signed-off-by: Chen Gong <g.chen@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Removed duplicated include <asm/div64.h> in
drivers/mtd/nand/nandsim.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

It was only used by code in arch/ppc, and arch/ppc is gone, so remove
the unused harrier_defs.h as well.
Signed-off-by: Paul Mackerras <paulus@samba.org>

Back when .gitignore file was added to arch/powerpc/ in 06f2138e ([POWERPC]
Add files build to .gitignore, 2006-11-26), there indeed was nothing
tracked in the ignored hierarchy and ignoring everything made sense.  But
we have very many tracked files there these days, and having a higher
level .gitignore that ignores everything is asking for future troubles..

This should have been part of b8b572e1 (powerpc: Move include files to
arch/powerpc/include/asm, 2008-08-01).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The function htab_bolt_mapping() is used to create permanent
mappings in the MMU hash table, for example, in order to create
the linear mapping of vmemmap.  It's also used by early boot
ioremap (before mem_init_done).

However, the way ioremap uses it is incorrect as it passes it the
protection flags in the "linux PTE" form while htab_bolt_mapping()
expects them in the hash table format.  This is made more confusing by
the fact that some of those flags are actually in the same position in
both cases.

This fixes it all by making htab_bolt_mapping() take normal linux
protection flags instead, and use a little helper to convert them to
htab flags. Callers can now use the usual PAGE_* definitions safely.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

 arch/powerpc/include/asm/mmu-hash64.h |    2 -
 arch/powerpc/mm/hash_utils_64.c       |   65 ++++++++++++++++++++--------------
 arch/powerpc/mm/init_64.c             |    9 +---
 3 files changed, 44 insertions(+), 32 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>

When we have an ISA memory hole (ie, a PCI window that allows us to
generate PCI memory cycles at low PCI address) mixed with other
resources using a different CPU <=> PCI mapping, we must not keep
the ISA hole in the bridge resource list.

If we do, things might start trying to allocate device resources
in there and will get the PCI addresses wrong.

This fixes it by arranging to remove the ISA memory hole resource in
this case.  This fixes various cases of PCMCIA breakage on PowerBooks
using the MPC106 "grackle" bridge.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The kernel copy of the rtas args struct contains the return
value(s) for the specified rtas call.  These are copied back
to user space with the assumption that every value has been
set by the rtas call, which turns out to be not always true.
Thus userspace can see random values and think the call failed
when in fact it succeeded, but for some reason didn't set one
of the return values.

This fixes the problem by zeroing out the return value fields
of the rtas args struct before processing the rtas call.
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Fix following warnings:
drivers/watchdog/pcwd.c: In function 'pcwd_open':
drivers/watchdog/pcwd.c:703: warning: passing argument 2 of 'test_and_set_bit' from incompatible pointer type
drivers/watchdog/pcwd.c: In function 'pcwd_close':
drivers/watchdog/pcwd.c:723: warning: passing argument 2 of 'clear_bit' from incompatible pointer type
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This patchset cleans up the TC6393XB support.

* Add provision for the MMC subdevice
* Disable / enable clocks on suspend / resume
* Remove fragments of badly merged code (eg. linux/fb include etc.)
* Use a device specific clock name to break dependancy on ARM/PXA2XX
* Drop unnecessary resource names
* Switch to tmio_io* accessors
Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

The TMIO chips are only found (and thus tested) on ARM machines.
Moreover, we don't want the TMIO cells to be built if one of the TMIO
driver is not selected (which indirectly make the TMIO cells drivers
depend on ARM as well).
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

This patch adds support for the MMC subdevice 'cell' commonly found in
TMIO based MFDs.
Signed-off-by: Ian Molton <spyro@f2s.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

This patch adds support for the NAND controller commonly found in
TMIO based MFDs.
Signed-off-by: Ian Molton <spyro@f2s.com>
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

Drop the legacy lm75 driver, and add a detect callback to the
new-style driver to achieve the same functionality.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>

Fix various printk format strings where %zd was passed a size_t;
those should be %zu instead.  (Courtesy of a version of GCC which
warns when these details are wrong.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

We check for address business in i2c_probe_address(),
i2c_detect_address() and i2c_new_probed_device(), but this isn't
sufficient. Drivers can call i2c_attach_client() and
i2c_new_device() on any address, so we must check the address there
as well.

This fixes bug #11239:
http://bugzilla.kernel.org/show_bug.cgi?id=11239Signed-off-by: Jean Delvare <khali@linux-fr.org>