The generic code allows a few nice things such as node local allocations
and dipping into the CMA area.  The lookup of the right zone for a given
dma mask works a little different, but the results should be the same.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The only user left is powerpc, but even there the generic dma-direct
version works just as well, given that we guarantee that the swiotlb
buffer must always be addressable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This function is largely identical to the generic version used
everywhere else.  Replace it with the generic version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This function is identical to the generic dma_direct_get_required_mask,
except that the generic version also takes the bus_dma_mask account,
which could lead to incorrect results in the powerpc version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The coherent cache version of this function already is functionally
identicall to the default version, and by defining the
arch_dma_coherent_to_pfn hook the same is ture for the noncoherent
version as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use the standard portable helper instead of the powerpc specific one,
which is about to go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Instead of letting the architecture supply all of dma_set_mask just
give it an additional hook selected by Kconfig.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We need to compare the last byte in the dma range and not the one after it
for the bus_dma_mask, just like we do for the regular dma_mask.  Fix this
cleanly by merging the two comparisms into one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The max_direct_dma_addr duplicates the bus_dma_mask field in struct
device.  Use the generic field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

pci_dma_dev_setup_swiotlb is only used by the fsl_pci code, and closely
related to it, so fsl_pci.c seems like a better place for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This function is only used by the Cell iommu code, which can keep track
if it is using the iommu internally just as good.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

All iommu capable platforms now always use the iommu code with the
internal bypass, so there is not need for this magic anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Unused now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The ppc_md and pci_controller_ops methods are unused now and can be
removed.  The dma_nommu implementation is generic to the generic one
except for using max_pfn instead of calling into the memblock API,
and all other dma_map_ops instances implement a method of their own.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

These devices are not PCIe devices and do not have associated dma map
ops, so this is just dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This function is completely bogus - the fact that two PCIe devices come
from the same vendor has absolutely nothing to say about the DMA
capabilities and characteristics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If dart_init failed we didn't have a chance to setup dma or controller
ops yet, so there is no point in resetting them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This gets rid of a lot of clumsy code and finally allows us to mark
dma_iommu_ops const.

Includes fixes from Michael Ellerman.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Configure the dma settings at device setup time, and stop playing games
with get_pci_dma_ops.  This prepares for using the common dma_configure
code later on.

Includes fixes from Michael Ellerman.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Call dma_get_required_mask_pSeriesLP directly instead of dma_iommu_ops
to simply the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add a new iommu_bypass flag to struct dev_archdata so that the dma_iommu
implementation can handle the direct mapping transparently instead of
switiching ops around.  Setting of this flag is controlled by new
pci_controller_ops method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

vio_dma_mapping_ops currently does a lot of indirect calls through
dma_iommu_ops, which not only make the code harder to follow but are
also expensive in the post-spectre world.  Unwind the indirect calls
by calling the ppc_iommu_* or iommu_* APIs directly applicable, or
just use the dma_iommu_* methods directly where we can.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If there is no ZONE_DMA32 we might need GFP_DMA to be able to
allocate memory that satisfies a 32-bit DMA mask.
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The pasemi driver never set a DMA mask, and given that the powerpc
DMA mapping routines never check it this worked ok so far.  But the
generic dma-direct code which I plan to switch on for powerpc checks
the DMA mask and fails unsupported mapping requests, so we need to
make sure the proper 64-bit mask is set.
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

UNAME26 is a mechanism to report Linux's version as 2.6.x, for
compatibility with old/broken software.  Due to the way it is
implemented, it would have to be updated after 5.0, to keep the
resulting versions unique.  Linus Torvalds argued:

 "Do we actually need this?

  I'd rather let it bitrot, and just let it return random versions. It
  will just start again at 2.4.60, won't it?

  Anybody who uses UNAME26 for a 5.x kernel might as well think it's
  still 4.x. The user space is so old that it can't possibly care about
  differences between 4.x and 5.x, can it?

  The only thing that matters is that it shows "2.4.<largeenough>",
  which it will do regardless"
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "A bigger batch than I anticipated this week, for two reasons:

   - Some fallout on Davinci from board file -> DTB conversion, that
     also includes a few longer-standing fixes (i.e. not recent
     regressions).

   - drivers/reset material that has been in linux-next for a while, but
     didn't get sent to us until now for a variety of reasons
     (maintainer out sick, holidays, etc). There's a functional
     dependency in there such that one platform (Altera's SoCFPGA) won't
     boot without one of the patches; instead of reverting the patch
     that got merged, I looked at this set and decided it was small
     enough that I'll pick it up anyway. If you disagree I can revisit
     with a smaller set.

  That being said, there's also a handful of the usual stuff:

   - Fix for a crash on Armada 7K/8K when the kernel touches
     PSCI-reserved memory

   - Fix for PCIe reset on Macchiatobin (Armada 8K development board,
     what this email is sent from in fact :)

   - Enable a few new-merged modules for Amlogic in arm64 defconfig

   - Error path fixes on Integrator

   - Build fix for Renesas and Qualcomm

   - Initialization fix for Renesas RZ/G2E

  .. plus a few more fixlets"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  ARM: integrator: impd1: use struct_size() in devm_kzalloc()
  qcom-scm: Include <linux/err.h> header
  gpio: pl061: handle failed allocations
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area
  ARM: dts: da850-lcdk: Correct the sound card name
  ARM: dts: da850-lcdk: Correct the audio codec regulators
  ARM: dts: da850-evm: Correct the sound card name
  ARM: dts: da850-evm: Correct the audio codec regulators
  ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
  ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
  ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
  ARM: davinci: da850-evm: fix label names in GPIO lookup entries
  ARM: davinci: da830-evm: fix label names in GPIO lookup entries
  arm64: defconfig: enable modules for amlogic s400 sound card
  reset: uniphier-glue: Add AHCI reset control support in glue layer
  dt-bindings: reset: uniphier: Add AHCI core reset description
  reset: uniphier-usb3: Rename to reset-uniphier-glue
  dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
  ...

Pull btrfs fixes from David Sterba:

 - two regression fixes in clone/dedupe ioctls, the generic check
   callback needs to lock extents properly and wait for io to avoid
   problems with writeback and relocation

 - fix deadlock when using free space tree due to block group creation

 - a recently added check refuses a valid fileystem with seeding device,
   make that work again with a quickfix, proper solution needs more
   intrusive changes

* tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Use real device structure to verify dev extent
  Btrfs: fix deadlock when using free space tree due to block group creation
  Btrfs: fix race between reflink/dedupe and relocation
  Btrfs: fix race between cloning range ending at eof and writeback

Pull driver core fixes from Greg KH:
 "Here is one small sysfs change, and a documentation update for 5.0-rc2

  The sysfs change moves from using BUG_ON to WARN_ON, as discussed in
  an email thread on lkml while trying to track down another driver bug.
  sysfs should not be crashing and preventing people from seeing where
  they went wrong. Now it properly recovers and warns the developer.

  The documentation update removes the use of BUS_ATTR() as the kernel
  is moving away from this to use the specific BUS_ATTR_RW() and friends
  instead. There are pending patches in all of the different subsystems
  to remove the last users of this macro, but for now, don't advertise
  it should be used anymore to keep new ones from being introduced.

  Both have been in linux-next with no reported issues"

* tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: driver core: remove use of BUS_ATTR
  sysfs: convert BUG_ON to WARN_ON

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for some reported issues.

  One reverts a patch that was made to the rtl8723bs driver that turned
  out to not be needed at all as it was a bug in clang. The others fix
  up some reported issues in the rtl8188eu driver and update the
  MAINTAINERS file to point to Larry for this driver so he can get the
  bug reports easier.

  All have been in linux-next with no reported issues"

* tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert "staging: rtl8723bs: Mark ACPI table declaration as used"
  staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
  staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
  MAINTAINERS: Add entry for staging driver r8188eu

Pull tty/serial fixes from Greg KH:
 "Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
  issues.

  The first is a simple serial driver fix for a regression that showed
  up in 5.0-rc1. The second one resolves a number of reported issues
  with the recent tty locking fixes that went into 5.0-rc1. Lots of
  people have tested the second one and say it resolves their issues.

  Both have been in linux-next with no reported issues"

* tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Don't hold ldisc lock in tty_reopen() if ldisc present
  serial: lantiq: Do not swap register read/writes

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes and quirk updates for 5.0-rc2.

  The majority here are some quirks for some storage devices to get them
  to work properly. There's also a fix here to resolve the reported
  issues with some audio devices that say they are UAC3 compliant, but
  really are not.

  And a fix up for the MAINTAINERS file to remove a dead url.

  All have been in linux-next with no reported issues"

* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: storage: Remove outdated URL from MAINTAINERS
  USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
  usbcore: Select only first configuration for non-UAC3 compliant devices
  USB: storage: add quirk for SMI SM3350
  USB: storage: don't insert sane sense for SPC3+ when bad sense specified
  usb: cdc-acm: send ZLP for Telit 3G Intel based modems

Pull cifs fixes from Steve French:
 "A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches
  fix an important set of crediting (flow control) problems, and also
  two problems in cifs_writepages, ddressing some large i/o and also
  compounding issues"

* tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  CIFS: Fix error paths in writeback code
  CIFS: Move credit processing to mid callbacks for SMB3
  CIFS: Fix credits calculation for cancelled requests
  cifs: Fix potential OOB access of lock element array
  cifs: Limit memory used by lock request calls to a page
  cifs: move large array from stack to heap
  CIFS: Do not hide EINTR after sending network packets
  CIFS: Fix credit computation for compounded requests
  CIFS: Do not set credits to 1 if the server didn't grant anything
  CIFS: Fix adjustment of credits for MTU requests
  cifs: Fix a tiny potential memory leak
  cifs: Fix a debug message

Late reset controller changes for v5.0

This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.

* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
  reset: uniphier-glue: Add AHCI reset control support in glue layer
  dt-bindings: reset: uniphier: Add AHCI core reset description
  reset: uniphier-usb3: Rename to reset-uniphier-glue
  dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
  ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
  reset: socfpga: add an early reset driver for SoCFPGA
  reset: fix null pointer dereference on dev by dev_name
  reset: Add reset_control_get_count()
  reset: Improve reset controller kernel docs
  ARC: HSDK: improve reset driver
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu fixes for 5.0

They are all device tree fixes which also worth being in stable:

 - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
   this area and crashing while doing it.

 - Use correct PCIe reset signal on MACCHIATOBin  (Armada 8040 based)

 - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)

* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes

Fixes for the Integrator:
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.

* tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: integrator: impd1: use struct_size() in devm_kzalloc()
  gpio: pl061: handle failed allocations
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes

Amlogic DT fixes for v5.0-rc
- arm64: defconfig: enable modules for amlogic s400 sound card

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: defconfig: enable modules for amlogic s400 sound card
Signed-off-by: Olof Johansson <olof@lixom.net>