- 13 Dec, 2006 40 commits
-
-
Ingo Molnar authored
Cleanup: the VERY_VERBOSE define was unnecessarily dependent on #ifdef VERBOSE - while the VERBOSE switch is 0 or 1 (always defined). Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
Clear all the chains during lockdep_reset(). This fixes some locking-selftest false positives i saw on -rt. (never saw those on mainline though, but it could happen.) Signed-off-by:
-
Ingo Molnar authored
Make verbose lockdep messages (off by default) more informative by printing out the hash chain key. (this patch was what helped me catch the earlier lockdep hash-collision bug) Signed-off-by:
-
Ingo Molnar authored
Fix typo in the class_filter() function. (filtering is not used by default so this only affects lockdep-internal debugging cases) Signed-off-by:
-
Ingo Molnar authored
Most distributions enable sysrq support but set it to 0 by default. Add a sysrq_always_enabled boot option to always-enable sysrq keys. Useful for debugging - without having to modify the disribution's config files (which might not be possible if the kernel is on a live CD, etc.). Also, while at it, clean up the sysrq interfaces. [bunk@stusta.de: make sysrq_always_enabled_setup() static] Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Chen, Kenneth W authored
Implement block device specific .direct_IO method instead of going through generic direct_io_worker for block device. direct_io_worker() is fairly complex because it needs to handle O_DIRECT on file system, where it needs to perform block allocation, hole detection, extents file on write, and tons of other corner cases. The end result is that it takes tons of CPU time to submit an I/O. For block device, the block allocation is much simpler and a tight triple loop can be written to iterate each iovec and each page within the iovec in order to construct/prepare bio structure and then subsequently submit it to the block layer. This significantly speeds up O_D on block device. [akpm@osdl.org: small speedup] Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by:
-
Mark Fasheh authored
Update ocfs2_should_update_atime() to understand the MNT_RELATIME flag and to test against mtime / ctime accordingly. [akpm@osdl.org: cleanups] Signed-off-by:
Mark Fasheh <mark.fasheh@oracle.com> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Valerie Henson authored
Add "relatime" (relative atime) support. Relative atime only updates the atime if the previous atime is older than the mtime or ctime. Like noatime, but useful for applications like mutt that need to know when a file has been read since it was last modified. A corresponding patch against mount(8) is available at http://userweb.kernel.org/~akpm/mount-relative-atime.txtSigned-off-by:
Valerie Henson <val_henson@linux.intel.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Karel Zak <kzak@redhat.com> Signed-off-by:
-
Andrew Morton authored
Simplify touch_atime() layout. Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Chris Zankel authored
The kernel termios (ktermios) changes were somehow missed for Xtensa. This patch adds the ktermios structure and also includes some minor file name fix that was missed in the syscall patch. Signed-off-by:
Chris Zankel <chris@zankel.net> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Rafael J. Wysocki authored
Currently, to tell a task that it should go to the refrigerator, we set the PF_FREEZE flag for it and send a fake signal to it. Unfortunately there are two SMP-related problems with this approach. First, a task running on another CPU may be updating its flags while the freezer attempts to set PF_FREEZE for it and this may leave the task's flags in an inconsistent state. Second, there is a potential race between freeze_process() and refrigerator() in which freeze_process() running on one CPU is reading a task's PF_FREEZE flag while refrigerator() running on another CPU has just set PF_FROZEN for the same task and attempts to reset PF_FREEZE for it. If the refrigerator wins the race, freeze_process() will state that PF_FREEZE hasn't been set for the task and will set it unnecessarily, so the task will go to the refrigerator once again after it's been thawed. To solve first of these problems we need to stop using PF_FREEZE to tell tasks that they should go to the refrigerator. Instead, we can introduce a special TIF_*** flag and use it for this purpose, since it is allowed to change the other tasks' TIF_*** flags and there are special calls for it. To avoid the freeze_process()-refrigerator() race we can make freeze_process() to always check the task's PF_FROZEN flag after it's read its "freeze" flag. We should also make sure that refrigerator() will always reset the task's "freeze" flag after it's set PF_FROZEN for it. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Rafael J. Wysocki authored
Currently, if a task is stopped (ie. it's in the TASK_STOPPED state), it is considered by the freezer as unfreezeable. However, there may be a race between the freezer and the delivery of the continuation signal to the task resulting in the task running after we have finished freezing the other tasks. This, in turn, may lead to undesirable effects up to and including data corruption. To prevent this from happening we first need to make the freezer consider stopped tasks as freezeable. For this purpose we need to make freezeable() stop returning 0 for these tasks and we need to force them to enter the refrigerator. However, if there's no continuation signal in the meantime, the stopped tasks should remain stopped after all processes have been thawed, so we need to send an additional SIGSTOP to each of them before waking it up. Also, a stopped task that has just been woken up should first check if there's a freezing request for it and go to the refrigerator if that's the case. Signed-off-by:
-
Eric Dumazet authored
When some objects are allocated by one CPU but freed by another CPU we can consume lot of cycles doing divides in obj_to_index(). (Typical load on a dual processor machine where network interrupts are handled by one particular CPU (allocating skbufs), and the other CPU is running the application (consuming and freeing skbufs)) Here on one production server (dual-core AMD Opteron 285), I noticed this divide took 1.20 % of CPU_CLK_UNHALTED events in kernel. But Opteron are quite modern cpus and the divide is much more expensive on oldest architectures : On a 200 MHz sparcv9 machine, the division takes 64 cycles instead of 1 cycle for a multiply. Doing some math, we can use a reciprocal multiplication instead of a divide. If we want to compute V = (A / B) (A and B being u32 quantities) we can instead use : V = ((u64)A * RECIPROCAL(B)) >> 32 ; where RECIPROCAL(B) is precalculated to ((1LL << 32) + (B - 1)) / B Note : I wrote pure C code for clarity. gcc output for i386 is not optimal but acceptable : mull 0x14(%ebx) mov %edx,%eax // part of the >> 32 xor %edx,%edx // useless mov %eax,(%esp) // could be avoided mov %edx,0x4(%esp) // useless mov (%esp),%ebx [akpm@osdl.org: small cleanups] Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Paul Jackson authored
Elaborate the API for calling cpuset_zone_allowed(), so that users have to explicitly choose between the two variants: cpuset_zone_allowed_hardwall() cpuset_zone_allowed_softwall() Until now, whether or not you got the hardwall flavor depended solely on whether or not you or'd in the __GFP_HARDWALL gfp flag to the gfp_mask argument. If you didn't specify __GFP_HARDWALL, you implicitly got the softwall version. Unfortunately, this meant that users would end up with the softwall version without thinking about it. Since only the softwall version might sleep, this led to bugs with possible sleeping in interrupt context on more than one occassion. The hardwall version requires that the current tasks mems_allowed allows the node of the specified zone (or that you're in interrupt or that __GFP_THISNODE is set or that you're on a one cpuset system.) The softwall version, depending on the gfp_mask, might allow a node if it was allowed in the nearest enclusing cpuset marked mem_exclusive (which requires taking the cpuset lock 'callback_mutex' to evaluate.) This patch removes the cpuset_zone_allowed() call, and forces the caller to explicitly choose between the hardwall and the softwall case. If the caller wants the gfp_mask to determine this choice, they should (1) be sure they can sleep or that __GFP_HARDWALL is set, and (2) invoke the cpuset_zone_allowed_softwall() routine. This adds another 100 or 200 bytes to the kernel text space, due to the few lines of nearly duplicate code at the top of both cpuset_zone_allowed_* routines. It should save a few instructions executed for the calls that turned into calls of cpuset_zone_allowed_hardwall, thanks to not having to set (before the call) then check (within the call) the __GFP_HARDWALL flag. For the most critical call, from get_page_from_freelist(), the same instructions are executed as before -- the old cpuset_zone_allowed() routine it used to call is the same code as the cpuset_zone_allowed_softwall() routine that it calls now. Not a perfect win, but seems worth it, to reduce this chance of hitting a sleeping with irq off complaint again. Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
Christoph Lameter authored
More cleanups for slab.h 1. Remove tabs from weird locations as suggested by Pekka 2. Drop the check for NUMA and SLAB_DEBUG from the fallback section as suggested by Pekka. 3. Uses static inline for the fallback defs as also suggested by Pekka. 4. Make kmem_ptr_valid take a const * argument. 5. Separate the NUMA fallback definitions from the kmalloc_track fallback definitions. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Christoph Lameter authored
This is a response to an earlier discussion on linux-mm about splitting slab.h components per allocator. Patch is against 2.6.19-git11. See http://marc.theaimsgroup.com/?l=linux-mm&m=116469577431008&w=2 This patch cleans up the slab header definitions. We define the common functions of slob and slab in slab.h and put the extra definitions needed for slab's kmalloc implementations in <linux/slab_def.h>. In order to get a greater set of common functions we add several empty functions to slob.c and also rename slob's kmalloc to __kmalloc. Slob does not need any special definitions since we introduce a fallback case. If there is no need for a slab implementation to provide its own kmalloc mess^H^H^Hacros then we simply fall back to __kmalloc functions. That is sufficient for SLOB. Sort the function in slab.h according to their functionality. First the functions operating on struct kmem_cache * then the kmalloc related functions followed by special debug and fallback definitions. Also redo a lot of comments. Signed-off-by: Christoph Lameter <clameter@sgi.com>? Signed-off-by:
-
Mike Miller authored
Remove calls to pci_disable_device except in fail_all_cmds. The pci_disable_device function does something nasty to Smart Array controllers that pci_enable_device does not undo. So if the driver is unloaded it cannot be reloaded. Also, customers can disable any pci device via the ROM Based Setup Utility (RBSU). If the customer has disabled the controller we should not try to blindly enable the card from the driver. Please consider this for inclusion. Signed-off-by:
Mike Miller <mike.miller@hp.com> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Mike Miller authored
Map out more memory for our config table. It's required to reach offset 0x214 to disable DMA on the P600. I'm not sure how I lost this hunk. Please consider this for inclusion. Signed-off-by:
-
Jiri Slaby authored
When CONFIG_PCI is not defined (i.e. PCI bus is disabled), the sx driver fails to link, since some pci functions are not available. Fix this behaviour to be able to compile this driver on machines with no PCI bus (but with ISA bus support). Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Jiri Slaby authored
When CONFIG_PCI is not defined (i.e. PCI bus is disabled), the mxser_new driver fails to link, since some pci functions are not available. Fix this behaviour to be able to compile this driver on machines with no PCI bus (but with ISA bus support). Signed-off-by:
-
Randy Dunlap authored
With CONFIG_PCI=n: drivers/char/isicom.c: In function 'isicom_probe': drivers/char/isicom.c:1793: warning: implicit declaration of function 'pci_request_region' drivers/char/isicom.c:1827: warning: implicit declaration of function 'pci_release_region' Let's CONFIG_ISI depend on CONFIG_PCI. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Evgeniy Polyakov authored
Based on patch from Alexander Rigbo <alexander.rigbo@acgnystrom.se> Signed-off-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Avi Kivity authored
It seems macbooks set bit 2 but not bit 0, which is an "enabled but vmxon will fault" setting. Signed-off-by:
Avi Kivity <avi@qumranet.com> Tested-by: Alex Larsson (sometimes testing helps) Signed-off-by:
-
Michael Riepe authored
Signed-off-by:
-
Avi Kivity authored
They're not on speaking terms. Signed-off-by:
-
NeilBrown authored
Thanks Jens for alerting me to this. Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <raziebe@gmail.com> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Jeff Dike authored
The previous checkstack fix for UML, which needs to use the host's tools, was wrong in the crossbuilding case. It would use the build host's, rather than the target's, toolchain. This patch removes the old fix and adds an explicit special case for UML, leaving everyone else alone. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Christoph Lameter authored
Fallback_alloc() does not do the check for GFP_WAIT as done in cache_grow(). Thus interrupts are disabled when we call kmem_getpages() which results in the failure. Duplicate the handling of GFP_WAIT in cache_grow(). Signed-off-by:
-
Eric Dumazet authored
Fields of struct pipe_buf_operations have not a precise layout (ie not optimized to fit cache lines nor reduce cache line ping pongs) The bufs[] array is *large* and is placed near the beginning of the structure, so all following fields have a large offset. This is unfortunate because many archs have smaller instructions when using small offsets relative to a base register. On x86 for example, 7 bits offsets have smaller instruction lengths. Moving bufs[] at the end of pipe_buf_operations permits all fields to have small offsets, and reduce text size, and icache pressure. # size vmlinux.pre vmlinux text data bss dec hex filename 3268989 664356 492196 4425541 438745 vmlinux.pre 3268765 664356 492196 4425317 438665 vmlinux So this patch reduces text size by 224 bytes on my x86_64 machine. Similar results on ia32. Signed-off-by: -
Karsten Wiese authored
Clean up a little. Signed-off-by:
Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by:
-
Karsten Wiese authored
Added function sets "void (*conf_changed_callback)(void)". Call it, if .config's changed state changes. Use above in qconf.cc to set gui's save-widget's sensitvity. Signed-off-by:
-
Karsten Wiese authored
Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by:
-
Karsten Wiese authored
Run "make xconfig" on a freshly untarred kernel-tree. Look at the floppy disk icon of the qt application, that has just started: Its in a normal, active state. Mouse click on it: .config is being saved. This patch series changes things so taht after the mouse click on the floppy disk icon, the icon is greyed out. If you mouse click on it now, nothing happens. If you change some CONFIG_*, the floppy disk icon returns to "active state", that is, if you mouse click it now, .config is written. This patch: Returns sym_change_count to reflect the .config's change state. All read only accesses of sym_change_count are replaced by calls to conf_get_changed() . mconfig.c is manipulated to ask for saving only when conf_get_changed() returned true. Signed-off-by:
-
Eric W. Biederman authored
The code has been fixed to use kill_pid instead of kill_proc fix the comments as well. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
This reverts commit 373beb35. No one is using this identifier yet. The purpose of this identifier is to export nsproxy to user space which is wrong. nsproxy is an internal implementation optimization, which should keep our fork times from getting slower as we increase the number of global namespaces you don't have to share. Adding a global identifier like this is inappropriate because it makes namespaces inherently non-recursive, greatly limiting what we can do with them in the future. Signed-off-by:
-
Eric Dumazet authored
- pipe/splice should use const pipe_buf_operations and file_operations - struct pipe_inode_info has an unused field "start" : get rid of it. Signed-off-by:
-
Avi Kivity authored
Signed-off-by:
-
Avi Kivity authored
The pcd, pwt, and pat bits on page table entries affect the cpu cache. Since the cache is a host resource, the guest should not be able to control it. Moreover, the meaning of these bits changes depending on whether pat is enabled or not. So, force these bits to zero on shadow page table entries at all times. Signed-off-by:
-
Avi Kivity authored
The arch splitting patchset left an extra put_cpu() in core code, where it can cause trouble for CONFIG_PREEMPT kernels. Reported-by:
Huihong Luo <huisinro@yahoo.com> Signed-off-by:
-
Avi Kivity authored
Signed-off-by:
-
