- 12 Nov, 2009 2 commits
-
-
Eli Cohen authored
Current code has a limitation: an LSO header is not allowed to cross a 64 byte boundary. This patch removes this limitation by setting the WQE RR for large headers thus allowing LSO headers of any size. The extra buffer reserved for MLX4_IB_QP_LSO QPs has been doubled, from 64 to 128 bytes, assuming this is reasonable upper limit for header length. Also, this patch will cause IB_DEVICE_UD_TSO to be set only for HCA FW versions that set MLX4_DEV_CAP_FLAG_BLH; e.g. FW version 2.6.000 and higher. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Eli Cohen authored
There is no such flag DE - the field is reserved and should be zero. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
- 04 Nov, 2009 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Ironlake suspend/resume support drm/i915: kill warning in intel_find_pll_g4x_dp drm/i915: update watermarks before enabling PLLs drm/i915: add FIFO watermark support for G4x drm/i915: quiet DP i2c init drm/i915: fix panel fitting filter coefficient select for Ironlake drm/i915: fix to setup display reference clock control on Ironlake drm/i915: Install a fence register for fbc on g4x drm/i915: save/restore BLC histogram control reg across suspend/resume drm/i915: Fix FDI M/N setting according with correct color depth drm/i915: disable powersave feature for Ironlake currently drm/i915: Fix render reclock availability detection. drm/i915: Save and restore the GM45 FBC regs on suspend and resume. drm/i915: Set the LVDS_BORDER when using LVDS scaling mode drm/i915: disable FBC for Pineview, fixing a boot hang.
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: limit coop preemption cfq-iosched: fix bad return value cfq_should_preempt() backing-dev: bdi sb prune should be in the unregister path, not destroy Fix bio_alloc() and bio_kmalloc() documentation bio_put(): add bio_clone() to the list of functions in the comment
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_via: Remove redundant device ID for VIA VT8261 drivers/ata/libata: Move dereference after NULL test ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum v2
-
- 03 Nov, 2009 32 commits
-
-
Linus Torvalds authored
-
JosephChan@via.com.tw authored
Just remove redundant device ID for VIA VT8261. The device ID 0x9000 and 0x9040 are redundant (for VT8261). The 0x9040 is reserved for other usage. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Julia Lawall authored
In each case, if the NULL test on qc is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Mark Nelson authored
Like the Asus M2A-VM, MSI's K9A2 Platinum (MS-7376) can also support 64bit DMA. It is a new enough board that all the BIOS releases work correctly with 64bit DMA enabled. Signed-off-by: Mark Nelson <mdnelson8@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Shaohua Li authored
CFQ has an optimization for cooperated applications. if several io-context have close requests, they will get boost. But the optimization get abused. Considering thread a, b, which work on one file. a reads sectors s, s+2, s+4, ...; b reads sectors s+1, s+3, s +5, ... Both a and b are sequential read, so they can open idle window. a reads a sector s and goes to idle window and wakeup b. b reads sector s+1, since in current implementation, cfq_should_preempt() thinks a and b are cooperators, b will preempt a. b then reads sector s+1 and goes to idle window and wakeup a. for the same reason, a will preempt b and reads s+2. a and b will continue the circle. The circle will be very long, and a and b will occupy whole disk queue. Other applications will nearly have no chance to run. Fix this limiting coop preempt until a queue is scheduled normally again. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
Commit a6151c3a inadvertently reversed a preempt condition check, potentially causing a performance regression. Make the meta check correct again. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
Commit 592b09a4 was different from the tested path, in that it moved the bdi super_block prune from unregister to destroy context. This doesn't fully fix the sync hang bug on unexpected device removal, as need to prune the bdi cache pointer before killing flusher thread. Tested-by: Artur Skawina <art.08.09@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
git://github.com/at91linux/linux-2.6-at91Linus Torvalds authored
* 'for-linus' of git://github.com/at91linux/linux-2.6-at91: at91: at91sam9g45 family: identify several chip versions avr32: add two new at91 to cpu.h definition
-
Nicolas Ferre authored
cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds the capacity to differentiate Engineering Samples and final lots through the inclusion of at91_cpu_fully_identify() and the related chip IDs with chip version field preserved. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
Nicolas Ferre authored
Somme common drivers will need those at91 cpu_is_xxx() definitions. As at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch that adds those chips to cpu.h in AVR32 architecture. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits) MIPS: O32: Fix ppoll MIPS: Oprofile: Rename cpu_type from godson2 to loongson2 MIPS: Alchemy: Fix hang with high-frequency edge interrupts MIPS: TXx9: Fix spi-baseclk value MIPS: bcm63xx: Set the correct BCM3302 CPU name MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store MIPS: Avoid potential hazard on Context register MIPS: Octeon: Use lockless interrupt controller operations when possible. MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache MIPS: SMTC: Avoid queing multiple reschedule IPIs MIPS: GCMP: Avoid accessing registers when they are not present MIPS: GIC: Random fixes and enhancements. MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands MIPS: SPRAM: Clean up support code a little MIPS: 1004K: Enable SPRAM support. MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4 MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT. MIPS: MTI: Fix accesses to device registers on MIPS boards ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Remove some debug messages producing too much noise PM: Fix warning on suspend errors PM / Hibernate: Add newline to load_image() fail path PM / Hibernate: Fix error handling in save_image() PM / Hibernate: Fix blkdev refleaks PM / yenta: Split resume into early and late parts (rev. 4)
-
Ian Campbell authored
nr_processes() returns the sum of the per cpu counter process_counts for all online CPUs. This counter is incremented for the current CPU on fork() and decremented for the current CPU on exit(). Since a process does not necessarily fork and exit on the same CPU the process_count for an individual CPU can be either positive or negative and effectively has no meaning in isolation. Therefore calculating the sum of process_counts over only the online CPUs omits the processes which were started or stopped on any CPU which has since been unplugged. Only the sum of process_counts across all possible CPUs has meaning. The only caller of nr_processes() is proc_root_getattr() which calculates the number of links to /proc as stat->nlink = proc_root.nlink + nr_processes(); You don't have to be all that unlucky for the nr_processes() to return a negative value leading to a negative number of links (or rather, an apparently enormous number of links). If this happens then you can get failures where things like "ls /proc" start to fail because they got an -EOVERFLOW from some stat() call. Example with some debugging inserted to show what goes on: # ps haux|wc -l nr_processes: CPU0: 90 nr_processes: CPU1: 1030 nr_processes: CPU2: -900 nr_processes: CPU3: -136 nr_processes: TOTAL: 84 proc_root_getattr. nlink 12 + nr_processes() 84 = 96 84 # echo 0 >/sys/devices/system/cpu/cpu1/online # ps haux|wc -l nr_processes: CPU0: 85 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -953 proc_root_getattr. nlink 12 + nr_processes() -953 = -941 75 # stat /proc/ nr_processes: CPU0: 84 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -954 proc_root_getattr. nlink 12 + nr_processes() -954 = -942 File: `/proc/' Size: 0 Blocks: 0 IO Block: 1024 directory Device: 3h/3d Inode: 1 Links: 4294966354 Access: (0555/dr-xr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2009-11-03 09:06:55.000000000 +0000 Modify: 2009-11-03 09:06:55.000000000 +0000 Change: 2009-11-03 09:06:55.000000000 +0000 I'm not 100% convinced that the per_cpu regions remain valid for offline CPUs, although my testing suggests that they do. If not then I think the correct solution would be to aggregate the process_count for a given CPU into a global base value in cpu_down(). This bug appears to pre-date the transition to git and it looks like it may even have been present in linux-2.6.0-test7-bk3 since it looks like the code Rusty patched in http://lwn.net/Articles/64773/ was already wrong. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio-keys - use IRQF_SHARED Input: winbond-cir - select LEDS_TRIGGERS Input: i8042 - try to get stable CTR value when initializing Input: atkbd - add a quirk for OQO 01+ multimedia keys
-
git://git.fluff.org/bjdooks/linuxLinus Torvalds authored
* 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux: ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c ARM: S3C2440: mini2440: Fix spare warnings ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test ARM: S3C: Fix adc function exports ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set ARM: S3C24XX: Introduce S3C2442B CPU ARM: S3C24XX: Define a macro to avoid compilation error ARM: S3C: Add info for supporting circular DMA buffers ARM: S3C64XX: Set rate of crystal mux ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value
-
git://git.fluff.org/bjdooks/linuxLinus Torvalds authored
* 'i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c-mpc: Do not generate STOP after read. i2c: imx: disable clock when it's possible to save power. i2c: imx: only imx1 needs disable delay i2c: imx: check busy bit when START/STOP
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: add zero-fill for new btree node buffers nilfs2: fix irregular checkpoint creation due to data flush nilfs2: fix dirty page accounting leak causing hang at write
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) mac80211: check interface is down before type change cfg80211: fix NULL ptr deref libertas if_usb: Fix crash on 64-bit machines mac80211: fix reason code output endianness mac80211: fix addba timer ath9k: fix misplaced semicolon on rate control b43: Fix DMA TX bounce buffer copying mac80211: fix BSS leak rt73usb.c : more ids ipw2200: fix oops on missing firmware gre: Fix dev_addr clobbering for gretap sky2: set carrier off in probe net: fix sk_forward_alloc corruption pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames ibmtr: possible Read buffer overflow? net: Fix RPF to work with policy routing net: fix kmemcheck annotations e1000e: rework disable K1 at 1000Mbps for 82577/82578 e1000e: config PHY via software after resets ...
-
Pavel Machek authored
pm_runtime_idle() is somewhat noisy. Remove debug prints. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Romit Dasgupta authored
Fixes the point where we need to complete the power transition when device suspend fails, so that we don't print warnings about devices added to the device hierarchy after a failing suspend. [rjw: Modified changelog.] Signed-off-by: Romit Dasgupta <romit@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Jiri Slaby authored
Finish a line by \n when load_image fails in the middle of loading. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Jiri Slaby authored
There are too many retval variables in save_image(). Thus error return value from snapshot_read_next() may be ignored and only part of the snapshot (successfully) written. Remove 'error' variable, invert the condition in the do-while loop and convert the loop to use only 'ret' variable. Switch the rest of the function to consider only 'ret'. Also make sure we end printed line by \n if an error occurs. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Jiri Slaby authored
While cruising through the swsusp code I found few blkdev reference leaks of resume_bdev. swsusp_read: remove blkdev_put altogether. Some fail paths do not do that. swsusp_check: make sure we always put a reference on fail paths software_resume: all fail paths between swsusp_check and swsusp_read omit swsusp_close. Add it in those cases. And since swsusp_read doesn't drop the reference anymore, do it here unconditionally. [rjw: Fixed a small coding style issue.] Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Commit 0c570cde (PM / yenta: Fix cardbus suspend/resume regression) caused resume to fail on systems with two CardBus bridges. While the exact nature of the failure is not known at the moment, it can be worked around by splitting the yenta resume into an early part, executed during the early phase of resume, that will only resume the socket and power it up if there was a card in it during suspend, and a late part, executed during "regular" resume, that will carry out all of the remaining yenta resume operations. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14334, which is a listed regression from 2.6.31. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Reported-by: Stephen J. Gowdy <gowdy@cern.ch> Tested-by: Jose Marino <braket@hotmail.com>
-
Dmitry Eremin-Solenikov authored
There is nothing that disallows gpio-keys to share it's IRQ line w/ other drivers. Make it use IRQF_SHARED in request_irq(). An example of other driver with which I'd like to share IRQ line for GPIO buttons is ledtrig-gpio. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
David Härdeman authored
drivers/input/misc/winbond-cir.c depends on LEDS_TRIGGERS so add an appropriate select to drivers/input/misc/Kconfig Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
If user presses keys while i8042 is being initialized there is a chance that keyboard data will be mistaken for results of Read Control Register command causing futher troubles. Work around this issue by reading CTR several times and stop when we get matching results. Reported-and-tested-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
-
Ryusuke Konishi authored
Adds missing initialization of newly allocated b-tree node buffers. This avoids garbage data to be mixed in b-tree node blocks. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
Ryusuke Konishi authored
When nilfs flushes out dirty data to reduce memory pressure, creation of checkpoints is wrongly postponed. This bug causes irregular checkpoint creation especially in small footprint systems. To correct this issue, a timer for the checkpoint creation has to be continued if a log writer does not create a checkpoint. This will do the correction. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
Ryusuke Konishi authored
Bruno Prémont and Dunphy, Bill noticed me that NILFS will certainly hang on ARM-based targets. I found this was caused by an underflow of dirty pages counter. A b-tree cache routine was marking page dirty without adjusting page account information. This fixes the dirty page accounting leak and resolves the hang on arm-based targets. Reported-by: Bruno Prémont <bonbons@linux-vserver.org> Reported-by: Dunphy, Bill <WDunphy@tandbergdata.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: stable <stable@kernel.org>
-
- 02 Nov, 2009 3 commits
-
-
Joakim Tjernlund authored
The driver always ends a read with a STOP condition which breaks subsequent I2C reads/writes in the same transaction as these expect to do a repeated START(ReSTART). This will also help I2C multimaster as the bus will not be released after the first read, but when the whole transaction ends. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Richard Zhao authored
Enable clock before START, disable it after STOP. Signed-off-by: Richard Zhao <linuxzsc@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Richard Zhao authored
check cpu_is_mx1() when disable delay. Signed-off-by: Richard Zhao <linuxzsc@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-