- 06 Jul, 2012 19 commits
-
-
Hans Verkuil authored
A block of code is moved down in the code to make later changes easier. Do just the move without other changes to keep the diff readable for the upcoming patch. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Thomas Betker authored
Add ".has_radio = 1" for BTTV_BOARD_MAGICTVIEW061 because there are some CHP05x/CHP06x boards with a radio tuner. I still have an analog Askey Magic TView card (CHP051, PCI 144f:3002) which I use for radio only. This worked fine with kernel 2.6.37 (openSUSE 11.4), but no longer works with kernel 3.1.10 (openSUSE 12.1). The reason apparently is that ".has_radio = 1" is missing in bttv-cards.c for BTTV_BOARD_MAGICTVIEW061; when I add this line and recompile the kernel, radio is working again. The line is still missing in the latest git tree, for which I have generated the attached patch. I can't test what will happen for CHP05x/CHP06x devices without radio; however, it seems that other cards also have the problem that there are some boards with radio and some without, so I hope that this can be sorted out. Signed-off-by:
Thomas Betker <thomas.betker@freenet.de> Signed-off-by:
-
Benoît Thébaudeau authored
Add ADV7393 I²C-based video encoder driver. This driver has been tested on custom hardware. It has been tested for composite output. It is derived from the ADV7343 driver. Signed-off-by:
Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Remove variable and ignore return value of stv090x_chk_signal(). Tested by compilation only. [mchehab@redhat.com: instead of reverting and applying V3, applied just the diff patch, for the sake of a cleaner history] Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Laurent Pinchart authored
The alternate setting number is not equal to the alternate setting index in the interface alternate settings table. Use the alternate setting number from the interface descriptor when calling usb_set_interface(). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Jayakrishnan authored
When video endpoint is configured as bulk, a ZLP is sent after every video frames with size as multiple of 512 bytes. This is done so that host can detect end of transfer and pass data for processing. Still, frames that are multiple of 16K in size gets dropped. The ZLP sent by camera is ignored by uvc_video_decode_bulk(). The makes sure that the ZLP is not part of a video frame before ignoring it. If ZLP follows a video frame, then it triggers completion callback. [mchehab@redhat.com: Fix a small CodingStyle issue] Signed-off-by:
Jayakrishnan Memana <jayakrishnan.memana@maxim-ic.com> Signed-off-by:
-
Laurent Pinchart authored
Several developers have reported that the lack of macros for the struct uvc_xu_control_query query field in uvcvideo.h was confusing and forced them to look at the driver source code to find out what applications were supposed to pass in that field. Add a comment to the header to clarify the expected usage of the query field. Reported-by:
Paulo Assis <pj.assis@gmail.com> Signed-off-by:
-
Martin Blumenstingl authored
This patch simply fixes some logging calls: - Use KERN_INFO when printing the chip status. - Add a missing space when logging the drxk_gate_ctrl call. - Use the same logging text as always if the scu_command in GetQAMLockStatus fails. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
-
Martin Blumenstingl authored
Currently there are two different implementations (in the firmware) for the QAM demodulator command: one takes 4 and the other takes 2 parameters. The driver shows an error in dmesg When using the 4-parameter command with firmware that implements the 2-parameter command. Unfortunately this happens every time when chaning the frequency (on DVB-C). This patch simply makes configurable, how many command parameters will be used. All existing drxk_config instances using the "drxk_a3.mc" were updated because this firmware is the only loadable firmware where the QAM demodulator command takes 4 parameters. Some firmwares in the ROM might also use it. The drxk instances in the em28xx-dvb driver were also updated to silence the warnings. If no qam_demod_parameter_count is given in the drxk_config struct, then the correct number of parameters will be auto-detected. [mchehab@redhat.com: Fix a small CodingStyle issue at one comment] Signed-off-by:
-
Dan Carpenter authored
IQM_AF_CLKNEG_CLKNEGDATA__M is 0x2 and IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS is 0. (clkNeg | 0x2) is never equal to zero so the condition can never be true. I consulted with Ralph Metzler and the '|' should be changed to a '&'. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> CC: Ralph Metzler <rjkm@metzlerbros.de> Tested-by:
-
Mauro Carvalho Chehab authored
When tuner-xc2028 is not compiled as a module, dracut will need to copy the firmware inside the initfs image. So, use MODULE_FIRMWARE() to indicate such need. Signed-off-by: -
Mauro Carvalho Chehab authored
USB_VIDEO_CLASS_INPUT_EVDEV should be dependent on the UVC selection, as otherwise, when UVC is unselected, this dependent config still appears. Acked-by:
-
Mauro Carvalho Chehab authored
The IR to LIRC option were at the wrong sub-menu. Move it to the right place. Signed-off-by: -
Mauro Carvalho Chehab authored
Better arrange the remote controller driver items to happen after the core support, on their proper menus, and making clerarer what is media core options and what is media driver options. Acked-by:
-
David Dillow authored
Commit 7a6f6c29 (cx231xx: use URB_NO_TRANSFER_DMA_MAP) was intended to avoid mapping the DMA buffer for URB twice. This works for the URBs allocated with usb_alloc_urb(), as those are allocated from cohernent DMA pools, but the flag was also added for the VBI and audio URBs, which have a manually allocated area. This leaves the random trash in the structure after allocation as the DMA address, corrupting memory and preventing VBI and audio from working. Letting the USB core map the buffers solves the problem. Signed-off-by:
David Dillow <dave@thedillows.org> Cc: Sri Deevi <srinivasa.deevi@conexant.com> Signed-off-by:
-
David Dillow authored
Most calls to cx231xx_capture_start() already use the values from TRANSFER_TYPE, but cx231xx_capture_start() and cx231xx_initialize_stream_xfer() were hand coding the values. Use the named values (81 is never passed in), and simplify cx231xx_capture_start(), as the switch statements were identical and pcb_config->config_num is a u8, so any non-zero config got the same result. Signed-off-by:
-
Mauro Carvalho Chehab authored
The firmwares are there at the same place for a long time. However, each time I need to remember where it is, I need to seek at the net. The better is to just add a logic at the get_dvb_firmare script, in order to obtain it from a reliable source. Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: -
Mauro Carvalho Chehab authored
changeset 2b719d7b (v4l: drop v4l2_buffer.input and V4L2_BUF_FLAG_INPUT) broke compilation on x86_64: v4l2-compat-ioctl32.c: In function 'get_v4l2_buffer32': v4l2-compat-ioctl32.c:391:4: error: expected ')' before 'return' ... v4l2-compat-ioctl32.c: In function 'put_v4l2_buffer32': v4l2-compat-ioctl32.c:475:4: error: expected ')' before 'return' ... Add the missing close parenthesis character. Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 05 Jul, 2012 21 commits
-
-
Ezequiel García authored
Mauro Carvalho Chehab is the current maintainer of staging/media. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
After this patch, the MEDIA*_SUPPORT will be used as a filter, exposing only devices that are pertinent to one of the 3 V4L types: webcam/grabber, radio, analog TV. Signed-off-by: -
Mauro Carvalho Chehab authored
In the past, it was possible to have either DVB or V4L2 core as module and the other as builtin. Such config never make much sense, and created several issues in order to make the Kconfig dependency to work, as all drivers that depend on both (most TV drivers) would need to be compiled as 'm'. Due to that, the VIDEO_MEDIA config option were added. Instead of such weird approach, let's just use the MEDIA_SUPPORT =y or =m to select if the media subsystem core will be either builtin or module, simplifying the building system logic. Also, fix the tuners configuration, by enabling them only if a tuner is required. So, if just webcam/grabbers support is selected, no tuner option will be selected. Also, if only digital TV is selected, no analog tuner support is selected. That removes the need of using EXPERT customise options, when analog TV is not selected. Signed-off-by: -
Mauro Carvalho Chehab authored
Change the main items to: <m> Multimedia support ---> [ ] Cameras/video grabbers support [ ] Analog TV support [ ] Digital TV support [ ] AM/FM radio receivers/transmitters support [ ] Remote Controller support This provides an interface that is clearer to end users that are compiling the Kernel, and will allow the building system to automatically unselect drivers for unused functions. Signed-off-by: -
Mauro Carvalho Chehab authored
Now that the input fields got removed from the userspace API, there's no sense to keep there at the VB struct. Remove it. Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: -
Sakari Ailus authored
Remove input field in struct v4l2_buffer and flag V4L2_BUF_FLAG_INPUT which tells the former is valid. The flag is used by no driver currently. Also change the documentation accordingly. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
-
Mauro Carvalho Chehab authored
xc5000 is just a tuner, not a decoder, so both DMB-TH and ISDB-T should work properly there: it is just a matter of teaching the driver what saw filter should be used and how to calculate the center frequency. Requested-by:
Choi Wing Chan <chanchoiwing@gmail.com> Cc: Steven Toth <stoth@linuxtv.org> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Dmitry Lifshitz authored
tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by:
Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
-
Tomasz Moń authored
Add horizontal and vertical flip to the mem2mem_testdev driver. Flip modes can be enabled either separately or simultaneously. Signed-off-by:
Tomasz Moń <desowin@gmail.com> Signed-off-by:
-
Peter Meerwald authored
Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Value 0x00 was written instead of 0x10 which was aim. Bit4 is overcurrent disable timer - ODT. According to datasheet ODT functions are always enabled but setting it 1 is still recommended. Thanks to Aubin Constans to pointing that bug. Reported-by:
Aubin Constans <aconstans@wyplay.com> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Dan asked "Btw, why are the sizes specified in hex instead of decimal here?". After looking code, I agree also decimal presentation is clearer. So lets change those. Reported-by:
-
Antti Palosaari authored
Message length check was wrong which could cause garbage sent to LNB, but only in case garbage got from the userspace application. Reported-by:
-
Thomas Mair authored
Signed-off-by:
Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by:
Thomas Mair <thomas.mair86@googlemail.com> Acked-by:
-
Thomas Mair authored
Signed-off-by:
-
Thomas Mair authored
Signed-off-by:
-
Thomas Mair authored
This only adds support for the Terratec Cinergy T Stick Black device. Changes from previous patches: - fixed compiler warnings - added fc0013 tuner handling to this patch Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of using a table for reg bitmask, use a macro. This should save some data segment space. Cc: Thomas Mair <thomas.mair86@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: -
Thomas Mair authored
Changelog for ver. 0.5: - fixed code style and naming errors Changelog for ver. 0.4: - removed statistics as their calculation was wrong - fixed bug in Makefile - indentation and code style improvements Signed-off-by:
-
