- 04 Dec, 2018 1 commit
-
-
wentalou authored
KIQ in VF’s init delayed by another VF’s reset, which would cause late_init failed occasionally. MAX_KIQ_REG_TRY enlarged from 20 to 80 would fix this issue. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Wentao Lou <Wentao.Lou@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- 03 Dec, 2018 6 commits
-
-
Evan Quan authored
For some case, no need to force SoftMin/Max settings for all DPMs. It's OK to force on some specific DPM only. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
Evan Quan authored
For display config change event only, pre-display config settings are needed. Signed-off-by:
-
Evan Quan authored
New pptable upload through sysfs interface is supported. Signed-off-by:
-
Alex Deucher authored
Some power features rely on the driver loaded version so always load the MC firmware from the driver even if the vbios loaded a version already. Acked-by:
Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by:
-
Alex Deucher authored
Some variants require different MC firmware images. Acked-by:
-
Junwei Zhang authored
Some new variants require updated firmware. Signed-off-by:
-
- 30 Nov, 2018 3 commits
-
-
Christian König authored
Instead of delaying that to the first query. Otherwise we could try to use the SDMA for VM updates before the IB tests are done. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
-
Alex Deucher authored
Looks like it was missed when setting support was added. Reviewed-by:
-
Christian König authored
We need to set the NO_EVICT flag on the ghost object or otherwise we are adding it to the LRU. When it is added to the LRU we can run into a race between destroying and evicting it again. Signed-off-by:
-
- 29 Nov, 2018 4 commits
-
-
Roman Li authored
[Why] More than 4x4K didn't lightup on Vega20 due to low dcfclk value. Powerplay expects valid min requirement for dcfclk from DC. [How] Update min_dcfclock_khz based on min_engine_clock value. v2: backport to 4.20 (Alex) Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] If the "max bpc" isn't explicitly set in the atomic state then it have a value of 0. This has the correct behavior of limiting a panel to 8bpc in the case where the panel supports 8bpc. In the case of eDP panels this isn't a true assumption - there are panels that can only do 6bpc. Banding occurs for these displays. [How] Initialize the max_bpc when the connector resets to 8bpc. Also carry over the value when the state is duplicated. Bugzilla: https://bugs.freedesktop.org/108825 Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property") Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
-
Dave Airlie authored
Merge tag 'drm-misc-fixes-2018-11-28-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - mst: Don't try to validate ports while destroying them (Lyude) - Revert: Don't try to validate ports while destroying them (Lyude) - core: Don't set device to master unless set_master succeeds (Sergio) - meson: Do vblank_on/off on enable/disable (Neil) - meson: Use fast_io regmap option to avoid sleeping in irq ctx (Lyude) - meson: Don't walk off the end of the OSD EOTF LUTs (Lyude) Cc: Lyude Paul <lyude@redhat.com> Cc: Sergio Correia <sergio@correia.cc> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181128212936.GA21379@art_vandelay
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fixes for 4.20. Nothing major. - DC DP MST fix - GPUVM fix for huge page mapping - RLC fix for vega20 Signed-off-by:
-
- 28 Nov, 2018 8 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2018-11-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Just gvt-fixes-2018-11-26 ""One to correct MOCS registers load on engine list, one for rpm lock warning fix, and another for use-after-free fix for partial ggtt list destroy. " Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
R-Car DU v4.20 regression fix Signed-off-by:
-
Y.C. Chen authored
v1: over-sample data to increase the stability with some specific monitors v2: refine to avoid infinite loop v3: remove un-necessary "volatile" declaration [airlied: fix two checkpatch warnings] Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by:
-
Sam Bobroff authored
If the platform has no IO space, ioregs is placed next to the already allocated regs. In this case, it should not be separately freed. This prevents a kernel warning from __vunmap "Trying to vfree() nonexistent vm area" when unloading the driver. Fixes: 0dd68309 ("drm/ast: Try to use MMIO registers when PIO isn't supported") Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Lyude Paul authored
This reverts commit: c54c7374 ("drm/dp_mst: Skip validating ports during destruction, just ref") ugh. In drm_dp_destroy_connector_work(), we have a pretty good chance of freeing the actual struct drm_dp_mst_port. However, after destroying things we send a hotplug through (*mgr->cbs->hotplug)(mgr) which is where the problems start. For i915, this calls all the way down to the fbcon probing helpers, which start trying to access the port in a modeset. [ 45.062001] ================================================================== [ 45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180 [ 45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53 [ 45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G O 4.20.0-rc4Lyude-Test+ #3 [ 45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018 [ 45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper] [ 45.062641] Call Trace: [ 45.062685] dump_stack+0xbd/0x15a [ 45.062735] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 45.062801] ? printk+0x9f/0xc5 [ 45.062847] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 45.062909] ? ex_handler_refcount+0x146/0x180 [ 45.062970] print_address_description+0x71/0x239 [ 45.063036] ? ex_handler_refcount+0x146/0x180 [ 45.063095] kasan_report.cold.5+0x242/0x30b [ 45.063155] __asan_report_store4_noabort+0x1c/0x20 [ 45.063313] ex_handler_refcount+0x146/0x180 [ 45.063371] ? ex_handler_clear_fs+0xb0/0xb0 [ 45.063428] fixup_exception+0x98/0xd7 [ 45.063484] ? raw_notifier_call_chain+0x20/0x20 [ 45.063548] do_trap+0x6d/0x210 [ 45.063605] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.063732] do_error_trap+0xc0/0x170 [ 45.063802] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.063929] do_invalid_op+0x3b/0x50 [ 45.063997] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.064103] invalid_op+0x14/0x20 [ 45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 <0f> 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f [ 45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282 [ 45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968 [ 45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8 [ 45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3 [ 45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28 [ 45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8 [ 45.065084] drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper] [ 45.065225] intel_mst_disable_dp+0xda/0x180 [i915] [ 45.065361] intel_encoders_disable.isra.107+0x197/0x310 [i915] [ 45.065498] haswell_crtc_disable+0xbe/0x400 [i915] [ 45.065622] ? i9xx_disable_plane+0x1c0/0x3e0 [i915] [ 45.065750] intel_atomic_commit_tail+0x74e/0x3e60 [i915] [ 45.065884] ? intel_pre_plane_update+0xbc0/0xbc0 [i915] [ 45.065968] ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper] [ 45.066054] ? kasan_check_write+0x14/0x20 [ 45.066165] ? i915_gem_track_fb+0x13a/0x330 [i915] [ 45.066277] ? i915_sw_fence_complete+0xe9/0x140 [i915] [ 45.066406] ? __i915_sw_fence_complete+0xc50/0xc50 [i915] [ 45.066540] intel_atomic_commit+0x72e/0xef0 [i915] [ 45.066635] ? drm_dev_dbg+0x200/0x200 [drm] [ 45.066764] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915] [ 45.066898] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915] [ 45.067001] drm_atomic_commit+0xc4/0xf0 [drm] [ 45.067074] restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper] [ 45.067166] ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper] [ 45.067249] ? kasan_check_read+0x11/0x20 [ 45.067324] restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper] [ 45.067364] ? kasan_check_read+0x11/0x20 [ 45.067406] drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper] [ 45.067462] ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper] [ 45.067508] ? kasan_check_write+0x14/0x20 [ 45.070360] ? mutex_unlock+0x22/0x40 [ 45.073748] drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper] [ 45.075846] drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper] [ 45.078088] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper] [ 45.082614] intel_fbdev_output_poll_changed+0x9f/0x140 [i915] [ 45.087069] drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper] [ 45.089319] intel_dp_mst_hotplug+0x37/0x50 [i915] [ 45.091496] drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper] [ 45.093675] ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper] [ 45.095851] ? kasan_check_write+0x14/0x20 [ 45.098473] ? kasan_check_read+0x11/0x20 [ 45.101155] ? strscpy+0x17c/0x530 [ 45.103808] ? __switch_to_asm+0x34/0x70 [ 45.106456] ? syscall_return_via_sysret+0xf/0x7f [ 45.109711] ? read_word_at_a_time+0x20/0x20 [ 45.113138] ? __switch_to_asm+0x40/0x70 [ 45.116529] ? __switch_to_asm+0x34/0x70 [ 45.119891] ? __switch_to_asm+0x40/0x70 [ 45.123224] ? __switch_to_asm+0x34/0x70 [ 45.126540] ? __switch_to_asm+0x34/0x70 [ 45.129824] process_one_work+0x88d/0x15d0 [ 45.133172] ? pool_mayday_timeout+0x850/0x850 [ 45.136459] ? pci_mmcfg_check_reserved+0x110/0x128 [ 45.139739] ? wake_q_add+0xb0/0xb0 [ 45.143010] ? check_preempt_wakeup+0x652/0x1050 [ 45.146304] ? worker_enter_idle+0x29e/0x740 [ 45.149589] ? __schedule+0x1ec0/0x1ec0 [ 45.152937] ? kasan_check_read+0x11/0x20 [ 45.156179] ? _raw_spin_lock_irq+0xa3/0x130 [ 45.159382] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 45.162542] ? kasan_check_write+0x14/0x20 [ 45.165657] worker_thread+0x1a5/0x1470 [ 45.168725] ? set_load_weight+0x2e0/0x2e0 [ 45.171755] ? process_one_work+0x15d0/0x15d0 [ 45.174806] ? __switch_to_asm+0x34/0x70 [ 45.177645] ? __switch_to_asm+0x40/0x70 [ 45.180323] ? __switch_to_asm+0x34/0x70 [ 45.182936] ? __switch_to_asm+0x40/0x70 [ 45.185539] ? __switch_to_asm+0x34/0x70 [ 45.188100] ? __switch_to_asm+0x40/0x70 [ 45.190628] ? __schedule+0x7d4/0x1ec0 [ 45.193143] ? save_stack+0xa9/0xd0 [ 45.195632] ? kasan_check_write+0x10/0x20 [ 45.198162] ? kasan_kmalloc+0xc4/0xe0 [ 45.200609] ? kmem_cache_alloc_trace+0xdd/0x190 [ 45.203046] ? kthread+0x9f/0x3b0 [ 45.205470] ? ret_from_fork+0x35/0x40 [ 45.207876] ? unwind_next_frame+0x43/0x50 [ 45.210273] ? __save_stack_trace+0x82/0x100 [ 45.212658] ? deactivate_slab.isra.67+0x3d4/0x580 [ 45.215026] ? default_wake_function+0x35/0x50 [ 45.217399] ? kasan_check_read+0x11/0x20 [ 45.219825] ? _raw_spin_lock_irqsave+0xae/0x140 [ 45.222174] ? __lock_text_start+0x8/0x8 [ 45.224521] ? replenish_dl_entity.cold.62+0x4f/0x4f [ 45.226868] ? __kthread_parkme+0x87/0xf0 [ 45.229200] kthread+0x2f7/0x3b0 [ 45.231557] ? process_one_work+0x15d0/0x15d0 [ 45.233923] ? kthread_park+0x120/0x120 [ 45.236249] ret_from_fork+0x35/0x40 [ 45.240875] Allocated by task 242: [ 45.243136] save_stack+0x43/0xd0 [ 45.245385] kasan_kmalloc+0xc4/0xe0 [ 45.247597] kmem_cache_alloc_trace+0xdd/0x190 [ 45.249793] drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper] [ 45.252000] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper] [ 45.254389] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper] [ 45.256803] drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper] [ 45.259200] process_one_work+0x88d/0x15d0 [ 45.261597] worker_thread+0x1a5/0x1470 [ 45.264038] kthread+0x2f7/0x3b0 [ 45.266371] ret_from_fork+0x35/0x40 [ 45.270937] Freed by task 53: [ 45.273170] save_stack+0x43/0xd0 [ 45.275382] __kasan_slab_free+0x139/0x190 [ 45.277604] kasan_slab_free+0xe/0x10 [ 45.279826] kfree+0x99/0x1b0 [ 45.282044] drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper] [ 45.284330] drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper] [ 45.286660] process_one_work+0x88d/0x15d0 [ 45.288934] worker_thread+0x1a5/0x1470 [ 45.291231] kthread+0x2f7/0x3b0 [ 45.293547] ret_from_fork+0x35/0x40 [ 45.298206] The buggy address belongs to the object at ffff8882b4b70968 which belongs to the cache kmalloc-2k of size 2048 [ 45.303047] The buggy address is located 0 bytes inside of 2048-byte region [ffff8882b4b70968, ffff8882b4b71168) [ 45.308010] The buggy address belongs to the page: [ 45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0 [ 45.313051] flags: 0x8000000000010200(slab|head) [ 45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40 [ 45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ 45.320966] page dumped because: kasan: bad access detected [ 45.326312] Memory state around the buggy address: [ 45.329085] ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.331845] ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.334584] >ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb [ 45.337302] ^ [ 45.340061] ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 45.342910] ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 45.345748] ================================================================== So, this definitely isn't a fix that we want. This being said; there's no real easy fix for this problem because of some of the catch-22's of the MST helpers current design. For starters; we always need to validate a port with drm_dp_get_validated_port_ref(), but validation relies on the lifetime of the port in the actual topology. So once the port is gone, it can't be validated again. If we were to try to make the payload helpers not use port validation, then we'd cause another problem: if the port isn't validated, it could be freed and we'd just start causing more KASAN issues. There are already hacks that attempt to workaround this in drm_dp_mst_destroy_connector_work() by re-initializing the kref so that it can be used again and it's memory can be freed once the VCPI helpers finish removing the port's respective payloads. But none of these really do anything helpful since the port still can't be validated since it's gone from the topology. Also, that workaround is immensely confusing to read through. What really needs to be done in order to fix this is to teach DRM how to track the lifetime of the structs for MST ports and branch devices separately from their lifetime in the actual topology. Simply put; this means having two different krefs-one that removes the port/branch device from the topology, and one that finally calls kfree(). This would let us simplify things, since we'd now be able to keep ports around without having to keep them in the topology at the same time, which is exactly what we need in order to teach our VCPI helpers to only validate ports when it's actually necessary without running the risk of trying to use unallocated memory. Such a fix is on it's way, but for now let's play it safe and just revert this. If this bug has been around for well over a year, we can wait a little while to get an actual proper fix here. Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: c54c7374 ("drm/dp_mst: Skip validating ports during destruction, just ref") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org # v4.6+ Acked-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181128210005.24434-1-lyude@redhat.com
-
shaoyunl authored
Driver shouldn't try to access any GFX registers until RLC is idle. During the test, it took 12 seconds for RLC to clear the BUSY bit in RLC_GPM_STAT register which is un-acceptable for driver. As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK cycles to finish its critical section. In a lowest 300M enginer clock setting(default from vbios), 50 us delay is enough. This commit fix the hang when RLC introduce the work around for XGMI which requires more cycles to setup more registers than normal Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Acked-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Felix Kuehling authored
Don't bounce back to the root level for fragment processing, because huge pages are not supported at that level. This is unlikely to happen with the default VM size on Vega, but can be exposed by limiting the VM size with the amdgpu.vm_size module parameter. Signed-off-by:
-
Felix Kuehling authored
Avoid potential integer overflows with left shift in huge-page mapping code by casting the operand to uin64_t first. Signed-off-by:
-
- 26 Nov, 2018 8 commits
-
-
Christian Hewitt authored
This essential mode for PAL users is missing, so add it. Fixes: 335e3713 ("drm/meson: Add support for HDMI venc modes and settings") Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org>
-
Lyude Paul authored
Currently on driver bringup with KASAN enabled, meson triggers an OOB memory access as shown below: [ 117.904528] ================================================================== [ 117.904560] BUG: KASAN: global-out-of-bounds in meson_viu_set_osd_lut+0x7a0/0x890 [ 117.904588] Read of size 4 at addr ffff20000a63ce24 by task systemd-udevd/498 [ 117.904601] [ 118.083372] CPU: 4 PID: 498 Comm: systemd-udevd Not tainted 4.20.0-rc3Lyude-Test+ #20 [ 118.091143] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 118.099768] Call trace: [ 118.102181] dump_backtrace+0x0/0x3e8 [ 118.105796] show_stack+0x14/0x20 [ 118.109083] dump_stack+0x130/0x1c4 [ 118.112539] print_address_description+0x60/0x25c [ 118.117214] kasan_report+0x1b4/0x368 [ 118.120851] __asan_report_load4_noabort+0x18/0x20 [ 118.125566] meson_viu_set_osd_lut+0x7a0/0x890 [ 118.129953] meson_viu_init+0x10c/0x290 [ 118.133741] meson_drv_bind_master+0x474/0x748 [ 118.138141] meson_drv_bind+0x10/0x18 [ 118.141760] try_to_bring_up_master+0x3d8/0x768 [ 118.146249] component_add+0x214/0x570 [ 118.149978] meson_dw_hdmi_probe+0x18/0x20 [meson_dw_hdmi] [ 118.155404] platform_drv_probe+0x98/0x138 [ 118.159455] really_probe+0x2a0/0xa70 [ 118.163070] driver_probe_device+0x1b4/0x2d8 [ 118.167299] __driver_attach+0x200/0x280 [ 118.171189] bus_for_each_dev+0x10c/0x1a8 [ 118.175144] driver_attach+0x38/0x50 [ 118.178681] bus_add_driver+0x330/0x608 [ 118.182471] driver_register+0x140/0x388 [ 118.186361] __platform_driver_register+0xc8/0x108 [ 118.191117] meson_dw_hdmi_platform_driver_init+0x1c/0x1000 [meson_dw_hdmi] [ 118.198022] do_one_initcall+0x12c/0x3bc [ 118.201883] do_init_module+0x1fc/0x638 [ 118.205673] load_module+0x4b4c/0x6808 [ 118.209387] __se_sys_init_module+0x2e8/0x3c0 [ 118.213699] __arm64_sys_init_module+0x68/0x98 [ 118.218100] el0_svc_common+0x104/0x210 [ 118.221893] el0_svc_handler+0x48/0xb8 [ 118.225594] el0_svc+0x8/0xc [ 118.228429] [ 118.229887] The buggy address belongs to the variable: [ 118.235007] eotf_33_linear_mapping+0x84/0xc0 [ 118.239301] [ 118.240752] Memory state around the buggy address: [ 118.245522] ffff20000a63cd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 118.252695] ffff20000a63cd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 118.259850] >ffff20000a63ce00: 00 00 00 00 04 fa fa fa fa fa fa fa 00 00 00 00 [ 118.267000] ^ [ 118.271222] ffff20000a63ce80: 00 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 [ 118.278393] ffff20000a63cf00: 00 00 00 00 00 00 00 00 00 00 00 00 04 fa fa fa [ 118.285542] ================================================================== [ 118.292699] Disabling lock debugging due to kernel taint It seems that when looping through the OSD EOTF LUT maps, we use the same max iterator for OETF: 20. This is wrong though, since 20*2 is 40, which means that we'll stop out of bounds on the EOTF maps. But, this whole thing is already confusing enough to read through as-is, so let's just replace all of the hardcoded sizes with OSD_(OETF/EOTF)_LUT_SIZE / 2. Signed-off-by:
-
Lyude Paul authored
Seeing as we use this registermap in the context of our IRQ handlers, we need to be using spinlocks for reading/writing registers so that we can still read them from IRQ handlers without having to grab any mutexes and accidentally sleep. We don't currently do this, as pointed out by lockdep: [ 18.403770] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 18.406744] in_atomic(): 1, irqs_disabled(): 128, pid: 68, name: kworker/u17:0 [ 18.413864] INFO: lockdep is turned off. [ 18.417675] irq event stamp: 12 [ 18.420778] hardirqs last enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60 [ 18.429510] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60 [ 18.437345] softirqs last enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50 [ 18.446684] softirqs last disabled at (0): [<0000000000000000>] (null) [ 18.453979] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9 [ 18.469839] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 18.480037] Workqueue: hci0 hci_power_on [bluetooth] [ 18.487138] Call trace: [ 18.494192] dump_backtrace+0x0/0x1b8 [ 18.501280] show_stack+0x14/0x20 [ 18.508361] dump_stack+0xbc/0xf4 [ 18.515427] ___might_sleep+0x140/0x1d8 [ 18.522515] __might_sleep+0x50/0x88 [ 18.529582] __mutex_lock+0x60/0x870 [ 18.536621] mutex_lock_nested+0x1c/0x28 [ 18.543660] regmap_lock_mutex+0x10/0x18 [ 18.550696] regmap_read+0x38/0x70 [ 18.557727] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi] [ 18.564804] __handle_irq_event_percpu+0xac/0x410 [ 18.571891] handle_irq_event_percpu+0x34/0x88 [ 18.578982] handle_irq_event+0x48/0x78 [ 18.586051] handle_fasteoi_irq+0xac/0x160 [ 18.593061] generic_handle_irq+0x24/0x38 [ 18.599989] __handle_domain_irq+0x60/0xb8 [ 18.606857] gic_handle_irq+0x50/0xa0 [ 18.613659] el1_irq+0xb4/0x130 [ 18.620394] debug_lockdep_rcu_enabled+0x2c/0x30 [ 18.627111] schedule+0x38/0xa0 [ 18.633781] schedule_timeout+0x3a8/0x510 [ 18.640389] wait_for_common+0x15c/0x180 [ 18.646905] wait_for_completion+0x14/0x20 [ 18.653319] mmc_wait_for_req_done+0x28/0x168 [ 18.659693] mmc_wait_for_req+0xa8/0xe8 [ 18.665978] mmc_wait_for_cmd+0x64/0x98 [ 18.672180] mmc_io_rw_direct_host+0x94/0x130 [ 18.678385] mmc_io_rw_direct+0x10/0x18 [ 18.684516] sdio_enable_func+0xe8/0x1d0 [ 18.690627] btsdio_open+0x24/0xc0 [btsdio] [ 18.696821] hci_dev_do_open+0x64/0x598 [bluetooth] [ 18.703025] hci_power_on+0x50/0x270 [bluetooth] [ 18.709163] process_one_work+0x2a0/0x6e0 [ 18.715252] worker_thread+0x40/0x448 [ 18.721310] kthread+0x12c/0x130 [ 18.727326] ret_from_fork+0x10/0x1c [ 18.735555] ------------[ cut here ]------------ [ 18.741430] do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000006265ec59>] wait_for_common+0x140/0x180 [ 18.752417] WARNING: CPU: 0 PID: 68 at kernel/sched/core.c:6096 __might_sleep+0x7c/0x88 [ 18.760553] Modules linked in: dm_mirror dm_region_hash dm_log dm_mod btsdio bluetooth snd_soc_hdmi_codec dw_hdmi_i2s_audio ecdh_generic brcmfmac brcmutil cfg80211 rfkill ir_nec_decoder meson_dw_hdmi(O) dw_hdmi rc_geekbox meson_rng meson_ir ao_cec rng_core rc_core cec leds_pwm efivars nfsd ip_tables x_tables crc32_generic f2fs uas meson_gxbb_wdt pwm_meson efivarfs ipv6 [ 18.799469] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9 [ 18.808858] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 18.818045] Workqueue: hci0 hci_power_on [bluetooth] [ 18.824088] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 18.829891] pc : __might_sleep+0x7c/0x88 [ 18.835722] lr : __might_sleep+0x7c/0x88 [ 18.841256] sp : ffff000008003cb0 [ 18.846751] x29: ffff000008003cb0 x28: 0000000000000000 [ 18.852269] x27: ffff00000938e000 x26: ffff800010283000 [ 18.857726] x25: ffff800010353280 x24: ffff00000868ef50 [ 18.863166] x23: 0000000000000000 x22: 0000000000000000 [ 18.868551] x21: 0000000000000000 x20: 000000000000038c [ 18.873850] x19: ffff000008cd08c0 x18: 0000000000000010 [ 18.879081] x17: ffff000008a68cb0 x16: 0000000000000000 [ 18.884197] x15: 0000000000aaaaaa x14: 0e200e200e200e20 [ 18.889239] x13: 0000000000000001 x12: 00000000ffffffff [ 18.894261] x11: ffff000008adfa48 x10: 0000000000000001 [ 18.899517] x9 : ffff0000092a0158 x8 : 0000000000000000 [ 18.904674] x7 : ffff00000812136c x6 : 0000000000000000 [ 18.909895] x5 : 0000000000000000 x4 : 0000000000000001 [ 18.915080] x3 : 0000000000000007 x2 : 0000000000000007 [ 18.920269] x1 : 99ab8e9ebb6c8500 x0 : 0000000000000000 [ 18.925443] Call trace: [ 18.929904] __might_sleep+0x7c/0x88 [ 18.934311] __mutex_lock+0x60/0x870 [ 18.938687] mutex_lock_nested+0x1c/0x28 [ 18.943076] regmap_lock_mutex+0x10/0x18 [ 18.947453] regmap_read+0x38/0x70 [ 18.951842] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi] [ 18.956269] __handle_irq_event_percpu+0xac/0x410 [ 18.960712] handle_irq_event_percpu+0x34/0x88 [ 18.965176] handle_irq_event+0x48/0x78 [ 18.969612] handle_fasteoi_irq+0xac/0x160 [ 18.974058] generic_handle_irq+0x24/0x38 [ 18.978501] __handle_domain_irq+0x60/0xb8 [ 18.982938] gic_handle_irq+0x50/0xa0 [ 18.987351] el1_irq+0xb4/0x130 [ 18.991734] debug_lockdep_rcu_enabled+0x2c/0x30 [ 18.996180] schedule+0x38/0xa0 [ 19.000609] schedule_timeout+0x3a8/0x510 [ 19.005064] wait_for_common+0x15c/0x180 [ 19.009513] wait_for_completion+0x14/0x20 [ 19.013951] mmc_wait_for_req_done+0x28/0x168 [ 19.018402] mmc_wait_for_req+0xa8/0xe8 [ 19.022809] mmc_wait_for_cmd+0x64/0x98 [ 19.027177] mmc_io_rw_direct_host+0x94/0x130 [ 19.031563] mmc_io_rw_direct+0x10/0x18 [ 19.035922] sdio_enable_func+0xe8/0x1d0 [ 19.040294] btsdio_open+0x24/0xc0 [btsdio] [ 19.044742] hci_dev_do_open+0x64/0x598 [bluetooth] [ 19.049228] hci_power_on+0x50/0x270 [bluetooth] [ 19.053687] process_one_work+0x2a0/0x6e0 [ 19.058143] worker_thread+0x40/0x448 [ 19.062608] kthread+0x12c/0x130 [ 19.067064] ret_from_fork+0x10/0x1c [ 19.071513] irq event stamp: 12 [ 19.075937] hardirqs last enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60 [ 19.083560] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60 [ 19.091401] softirqs last enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50 [ 19.100801] softirqs last disabled at (0): [<0000000000000000>] (null) [ 19.108135] ---[ end trace 38c4920787b88c75 ]--- So, fix this by enabling the fast_io option in our regmap config so that regmap uses spinlocks for locking instead of mutexes. Signed-off-by:
-
Neil Armstrong authored
Since Linux 4.17, calls to drm_crtc_vblank_on/off are mandatory, and we get a warning when ctrc is disabled : " driver forgot to call drm_crtc_vblank_off()" But, the vsync IRQ was not totally disabled due the transient hardware state and specific interrupt line, thus adding proper IRQ masking from the HHI system control registers. The last change fixes a race condition introduced by calling the added drm_crtc_vblank_on/off when an HPD event occurs from the HDMI connector, triggering a WARN_ON() in the _atomic_begin() callback when the CRTC is disabled, thus also triggering a WARN_ON() in drm_vblank_put() : WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/meson/meson_crtc.c:157 meson_crtc_atomic_begin+0x78/0x80 [...] Call trace: meson_crtc_atomic_begin+0x78/0x80 drm_atomic_helper_commit_planes+0x140/0x218 drm_atomic_helper_commit_tail+0x38/0x80 commit_tail+0x7c/0x80 drm_atomic_helper_commit+0xdc/0x150 drm_atomic_commit+0x54/0x60 restore_fbdev_mode_atomic+0x198/0x238 restore_fbdev_mode+0x6c/0x1c0 drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xf0 drm_fb_helper_set_par+0x34/0x60 drm_fb_helper_hotplug_event.part.28+0xb8/0xc8 drm_fbdev_client_hotplug+0xa4/0xe0 drm_client_dev_hotplug+0x90/0xe0 drm_kms_helper_hotplug_event+0x3c/0x48 drm_helper_hpd_irq_event+0x134/0x168 dw_hdmi_top_thread_irq+0x3c/0x50 [...] WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/drm_vblank.c:1026 drm_vblank_put+0xb4/0xc8 [...] Call trace: drm_vblank_put+0xb4/0xc8 drm_crtc_vblank_put+0x24/0x30 drm_atomic_helper_wait_for_vblanks.part.9+0x130/0x2b8 drm_atomic_helper_commit_tail+0x68/0x80 [...] The issue is that vblank need to be enabled in any occurrence of : - atomic_enable() - atomic_begin() and state->enable == true, which was not the case Moving the CRTC enable code to a common function and calling in one of these occurrence solves this race condition and makes sure vblank is enabled in each call to _atomic_begin() from the HPD event leading to drm_atomic_helper_commit_planes(). To Summarize : - Make sure that the CRTC code will call the drm_crtc_vblank_on()/off() - *Really* mask the Vsync IRQ - Initialize and enable vblank at the first atomic_begin()/_atomic_enable() Cc: stable@vger.kernel.org # 4.17+ Signed-off-by:
-
Sergio Correia authored
When drm_new_set_master() fails, set is_master to 0, to prevent a possible NULL pointer deref. Here is a problematic flow: we check is_master in drm_is_current_master(), then proceed to call drm_lease_owner() passing master. If we do not restore is_master status when drm_new_set_master() fails, we may have a situation in which is_master will be 1 and master itself, NULL, leading to the deref of a NULL pointer in drm_lease_owner(). This fixes the following OOPS, observed on an ArchLinux running a 4.19.2 kernel: [ 97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 97.807224] PGD 0 P4D 0 [ 97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P OE 4.19.2-arch1-1-ARCH #1 [ 97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018 [ 97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 97.807224] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 97.807224] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 [ 97.807224] Call Trace: [ 97.807224] drm_is_current_master+0x1a/0x30 [drm] [ 97.807224] drm_master_release+0x3e/0x130 [drm] [ 97.807224] drm_file_free.part.0+0x2be/0x2d0 [drm] [ 97.807224] drm_open+0x1ba/0x1e0 [drm] [ 97.807224] drm_stub_open+0xaf/0xe0 [drm] [ 97.807224] chrdev_open+0xa3/0x1b0 [ 97.807224] ? cdev_put.part.0+0x20/0x20 [ 97.807224] do_dentry_open+0x132/0x340 [ 97.807224] path_openat+0x2d1/0x14e0 [ 97.807224] ? mem_cgroup_commit_charge+0x7a/0x520 [ 97.807224] do_filp_open+0x93/0x100 [ 97.807224] ? __check_object_size+0x102/0x189 [ 97.807224] ? _raw_spin_unlock+0x16/0x30 [ 97.807224] do_sys_open+0x186/0x210 [ 97.807224] do_syscall_64+0x5b/0x170 [ 97.807224] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 97.807224] RIP: 0033:0x7f4147b07976 [ 97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44 [ 97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [ 97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976 [ 97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c [ 98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024 [ 98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012 [ 98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid [ 98.040039] dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler [ 98.040039] CR2: 0000000000000080 [ 98.040039] ---[ end trace 3b65093b6fe62b2f ]--- [ 98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 98.040039] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 98.040039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 Signed-off-by:
Sergio Correia <sergio@correia.cc> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181122053329.2692-1-sergio@correia.ccSigned-off-by:
-
Lyude Paul authored
Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I accidentally introduced into DRM two years ago. Pretend we have a topology like this: |- DP-1: mst_primary |- DP-4: active display |- DP-5: disconnected |- DP-6: active hub |- DP-7: active display |- DP-8: disconnected |- DP-9: disconnected If we unplug DP-6, the topology starting at DP-7 will be destroyed but it's payloads will live on in DP-1's VCPI allocations and thus require removal. However, this removal currently fails because drm_dp_update_payload_part1() will (rightly so) try to validate the port before accessing it, fail then abort. If we keep going, eventually we run the MST hub out of bandwidth and all new allocations will start to fail (or in my case; all new displays just start flickering a ton). We could just teach drm_dp_update_payload_part1() not to drop the port ref in this case, but then we also need to teach drm_dp_destroy_payload_step1() to do the same thing, then hope no one ever adds anything to the that requires a validated port reference in drm_dp_destroy_connector_work(). Kind of sketchy. So let's go with a more clever solution: any port that drm_dp_destroy_connector_work() interacts with is guaranteed to still exist in memory until we say so. While said port might not be valid we don't really care: that's the whole reason we're destroying it in the first place! So, teach drm_dp_get_validated_port_ref() to use the all mighty current_work() function to avoid attempting to validate ports from the context of mgr->destroy_connector_work. I can't see any situation where this wouldn't be safe, and this avoids having to play whack-a-mole in the future of trying to work around port validation. Signed-off-by:Jerry Zuo <Jerry.Zuo@amd.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by:
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-fixes-2018-11-26 - Fix engine check for correct MOCS regs load (Xinyun) - Fix rpm locking for vGPU ggtt init (Henry) - Fix use-after-free when destroy partial ggtt entries (Chris) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181126021820.GL12743@zhen-hp.sh.intel.com
-
Laurent Pinchart authored
Group start/stop is controlled by the DRES and DEN bits of DSYSR0 for the first group and DSYSR2 for the second group. On most DU instances, this maps to the first CRTC of the group. On M3-N, however, DU2 doesn't exist, but DSYSR2 does. There is no CRTC object there that maps to the correct DSYSR register. Commit 9144adc5 ("drm: rcar-du: Cache DSYSR value to ensure known initial value") switched group start/stop from using group read/write access to DSYSR to a CRTC-based API to cache the DSYSR value. While doing so, it introduced a regression on M3-N by accessing DSYSR3 instead of DSYSR2 to start/stop the second group. To fix this, access the DSYSR register directly through group read/write if the SoC is missing the first DU channel of the group. Keep using the rcar_du_crtc_dsysr_clr_set() function otherwise, to retain the DSYSR caching feature. Fixes: 9144adc5 ("drm: rcar-du: Cache DSYSR value to ensure known initial value") Reported-by:
Hoan Nguyen An <na-hoan@jinso.co.jp> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by:
Simon Horman <horms+renesas@verge.net.au>
-
- 25 Nov, 2018 5 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Two dma-direct / swiotlb regressions fixes: - zero is a valid physical address on some arm boards, we can't use it as the error value - don't try to cache flush the error return value (no matter what it is)" * tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: Skip cache maintenance on map error dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB -
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Fix a NFSv4 state manager deadlock when returning a delegation - NFSv4.2 copy do not allocate memory under the lock - flexfiles: Use the correct stateid for IO in the tightly coupled case * tag 'nfs-for-4.20-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: flexfiles: use per-mirror specified stateid for IO NFSv4.2 copy do not allocate memory under the lock NFSv4: Fix a NFSv4 state manager deadlock
-
Luc Van Oostenryck authored
I'm taking over the maintainance of Sparse so add myself as maintainer and move Christopher's info to CREDITS. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/willy/linux-daxLinus Torvalds authored
Pull XArray updates from Matthew Wilcox: "We found some bugs in the DAX conversion to XArray (and one bug which predated the XArray conversion). There were a couple of bugs in some of the higher-level functions, which aren't actually being called in today's kernel, but surfaced as a result of converting existing radix tree & IDR users over to the XArray. Some of the other changes to how the higher-level APIs work were also motivated by converting various users; again, they're not in use in today's kernel, so changing them has a low probability of introducing a bug. Dan can still trigger a bug in the DAX code with hot-offline/online, and we're working on tracking that down" * tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax: XArray tests: Add missing locking dax: Avoid losing wakeup in dax_lock_mapping_entry dax: Fix huge page faults dax: Fix dax_unlock_mapping_entry for PMD pages dax: Reinstate RCU protection of inode dax: Make sure the unlocking entry isn't locked dax: Remove optimisation from dax_lock_mapping_entry XArray tests: Correct some 64-bit assumptions XArray: Correct xa_store_range XArray: Fix Documentation XArray: Handle NULL pointers differently for allocation XArray: Unify xa_store and __xa_store XArray: Add xa_store_bh() and xa_store_irq() XArray: Turn xa_erase into an exported function XArray: Unify xa_cmpxchg and __xa_cmpxchg XArray: Regularise xa_reserve nilfs2: Use xa_erase_irq XArray: Export __xa_foo to non-GPL modules XArray: Fix xa_for_each with a single element at 0
-
- 24 Nov, 2018 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - revert of the high-resolution scrolling feature, as it breaks certain hardware due to incompatibilities between Logitech and Microsoft worlds. Peter Hutterer is working on a fixed implementation. Until that is finished, revert by Benjamin Tissoires. - revert of incorrect strncpy->strlcpy conversion in uhid, from David Herrmann - fix for buggy sendfile() implementation on uhid device node, from Eric Biggers - a few assorted device-ID specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Revert "Input: Add the `REL_WHEEL_HI_RES` event code" Revert "HID: input: Create a utility class for counting scroll events" Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"" Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice" Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice" Revert "HID: logitech: fix a used uninitialized GCC warning" Revert "HID: input: simplify/fix high-res scroll event handling" HID: Add quirk for Primax PIXART OEM mice HID: i2c-hid: Disable runtime PM for LG touchscreen HID: multitouch: Add pointstick support for Cirque Touchpad HID: steam: remove input device when a hid client is running. Revert "HID: uhid: use strlcpy() instead of strncpy()" HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges HID: input: Ignore battery reported by Symbol DS4308 HID: Add quirk for Microsoft PIXART OEM mouse
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas:: - Fix wrong conflict resolution around CONFIG_ARM64_SSBD - Fix sparse warning on unsigned long constant * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD block arm64: sysreg: fix sparse warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter. 2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann. 3) Fix socket wmem accounting in SCTP, from Xin Long. 4) Fix failed resume crash in ena driver, from Arthur Kiyanovski. 5) qed driver passes bytes instead of bits into second arg of bitmap_weight(). From Denis Bolotin. 6) Fix reset deadlock in ibmvnic, from Juliet Kim. 7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr Machata. 8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK compression during this period, from Eric Dumazet. 9) Add atomicity to SMC protocol cursor handling, from Ursula Braun. 10) Don't leave dangling error pointer if bpf_prog_add() fails in thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO headers, set sq->tso_hdrs to NULL. 11) Fix race condition over state variables in act_police, from Davide Caratti. 12) Disable guest csum in the presence of XDP in virtio_net, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits) net: gemini: Fix copy/paste error net: phy: mscc: fix deadlock in vsc85xx_default_config dt-bindings: dsa: Fix typo in "probed" net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue net: amd: add missing of_node_put() team: no need to do team_notify_peers or team_mcast_rejoin when disabling port virtio-net: fail XDP set if guest csum is negotiated virtio-net: disable guest csum during XDP set net/sched: act_police: add missing spinlock initialization net: don't keep lonely packets forever in the gro hash net/ipv6: re-do dad when interface has IFF_NOARP flag change packet: copy user buffers before orphan or clone ibmvnic: Update driver queues after change in ring size support ibmvnic: Fix RX queue buffer cleanup net: thunderx: set xdp_prog to NULL if bpf_prog_add fails net/dim: Update DIM start sample after each DIM iteration net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts net/smc: use after free fix in smc_wr_tx_put_slot() net/smc: atomic SMCD cursor handling net/smc: add SMC-D shutdown signal ... -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Dave and I have continued our work fixing corruption problems that can be found when running long-term burn-in exercisers on xfs. Here are some patches fixing most of the problems, but there will likely be more. :/ - Numerous corruption fixes for copy on write - Numerous corruption fixes for blocksize < pagesize writes - Don't miscalculate AG reservations for small final AGs - Fix page cache truncation to work properly for reflink and extent shifting - Fix use-after-free when retrying failed inode/dquot buffer logging - Fix corruptions seen when using copy_file_range in directio mode" * tag 'xfs-4.20-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: readpages doesn't zero page tail beyond EOF vfs: vfs_dedupe_file_range() doesn't return EOPNOTSUPP iomap: dio data corruption and spurious errors when pipes fill iomap: sub-block dio needs to zeroout beyond EOF iomap: FUA is wrong for DIO O_DSYNC writes into unwritten extents xfs: delalloc -> unwritten COW fork allocation can go wrong xfs: flush removing page cache in xfs_reflink_remap_prep xfs: extent shifting doesn't fully invalidate page cache xfs: finobt AG reserves don't consider last AG can be a runt xfs: fix transient reference count error in xfs_buf_resubmit_failed_buffers xfs: uncached buffer tracing needs to print bno xfs: make xfs_file_remap_range() static xfs: fix shared extent data corruption due to missing cow reservation -
Andreas Fiedler authored
The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by:
Andreas Fiedler <andreas.fiedler@gmx.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
