- 10 Jan, 2020 17 commits
-
-
Andy Shevchenko authored
Fix ambiguous spelling in the comments. While here, update two lines to fit one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
The timeout loop look more naturally when done like unsigned long timeout = ...; ... do { ... if (cond) return %OK; sleep(...); } while (time_before(timeout)); ...print timeout error... return %ERROR; It also saves LOCs. Convert the driver to this format of timeout loop. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Leonid Maksymchuk authored
ASUS TUF FX705DY/FX505DY starts in silent mode and under heavy CPU load it overheats and drops CPU frequency to 399MHz and stays at it until reboot [1]. Set throttle thermal policy to default to avoid overheating and throttlig. [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=203733Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Leonid Maksymchuk authored
Throttle thermal policy ACPI device is used to control CPU cooling and throttling. This patch adds sysfs entry for setting current mode and Fn+F5 hotkey that switches to next. Policy modes: * 0x00 - default * 0x01 - overboost * 0x02 - silent Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
1. Put on one line PROPERTY_ENTRY_STRING("firmware-name", ...) lines. In most cases this doesn't over the limit, the rest is pretty much obvious from reading point of view. 2. Put on one line DMI_MATCH() parameters, we already have over the limit lines. 3. Reduce indentation of function parameters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Tim Josten authored
Add touchscreen info for the PiPO W11 tablet. Signed-off-by: Tim Josten <timjosten@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Harry Pan authored
Adding new CML CPU model ID into platform driver support list. Signed-off-by: Harry Pan <harry.pan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Hans de Goede authored
Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum instead of 40) and likewise also allow the user to delay the fan speeding-up till the temperature hits 90 degrees Celcius (was 70). Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Hans de Goede authored
Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves the fan at the BIOS default setting, which is "Off". The CPU's thermal throttling should protect the system from damage, but not-loading is really not the best fallback in this case. This commit fixes this by re-setting module-parameter values to their defaults if they are out of range, instead of failing the probe with -EINVAL. Cc: stable@vger.kernel.org Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Fixes: 594ce6db ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Liming Sun authored
This commit fixes the potential deadlock caused by the console Rx and Tx processing at the same time. Rx and Tx both take the console and tmfifo spinlock but in different order which causes potential deadlock. The fix is to use different tmfifo spinlock for Rx and Tx since they protect different resources and it's safe to split the lock. Below is the reported call trace when copying/pasting large string in the console. Rx: _raw_spin_lock_irqsave (hvc lock) __hvc_poll hvc_poll in_intr vring_interrupt mlxbf_tmfifo_rxtx_one_desc (tmfifo lock) mlxbf_tmfifo_rxtx mlxbf_tmfifo_work_rxtx Tx: _raw_spin_lock_irqsave (tmfifo lock) mlxbf_tmfifo_virtio_notify virtqueue_notify virtqueue_kick put_chars hvc_push hvc_write (hvc lock) ... do_tty_write tty_write Fixes: 1357dfd7 ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc") Cc: <stable@vger.kernel.org> # 5.4+ Reviewed-by: David Woods <dwoods@mellanox.com> Signed-off-by: Liming Sun <lsun@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to x86 Platform Specific Drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
kstrtou32_from_user() may return different error codes on certain circumstances. Respect all possible values. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
Fix spelling of MHz unit in a comment. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
There are two problematic places where indentation is not good to a reader and maintainer. Fix them here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
There is a function which is solely used for DebugFS interface, do not build it otherwise. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
kstrtou32_from_user() may return different error codes on certain circumstances. Respect all possible values. While here, move it out of the lock: there is no data access that lock guards. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
Use devm_platform_ioremap_resource() to simplify the code a bit. While here, drop initialized but unused ssram_base_addr and ssram_size members. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
- 20 Dec, 2019 12 commits
-
-
Gayatri Kammela authored
Add Intel Elkhart Lake to the list of the platforms that driver supports for the PMC device. Just like Ice Lake and Tiger Lake, Elkhart Lake can also reuse all the Cannon Lake PCH IPs. Also, it uses the same PCH IPs of Tiger Lake, no additional effort is needed to enable but to simply reuse them. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: David E. Box <david.e.box@intel.com> Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Gayatri Kammela authored
Add Intel Tiger Lake to the list of the platforms that driver supports for the PMC device. Just like Ice Lake, Tiger Lake can also reuse all the Cannon Lake PCH IPs. Since Tiger Lake has almost the same number of PCH IPs as Ice Lake, reuse Ice Lake's PPFEAR_NUM_ENTRIES instead of defining a new macro. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: David E. Box <david.e.box@intel.com> Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Gayatri Kammela authored
Check if the platform supports and only then add a debugfs entry for PCH IP power gating status. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: David E. Box <david.e.box@intel.com> Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Gayatri Kammela authored
The current implementation of intel_pmc_core driver allows to reuse, but does not reflect the exact number and names of IPs for a newer platform which does not necessarily support all the IPs in the entries. The names and number of these IPs might differ from its previous platforms. The number of PCH IPs per platform is calculated based on PPFEAR_NUM_ENTRIES defined, where each entry represents a bucket (8 bits). The platform can support 'n' entries, but not necessarily all 'n * 8' IPs. Create platform dependent bitmap structures to specify the exact number, names of IPs while reusing the existing IPs. The changes in this patch are preparatory to accommodate future SoCs that might reuse the CNL/ICL PCH IPs, and to reflect the exact number of IPs with its names. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: David E. Box <david.e.box@intel.com> Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
There is no need to assign NULL or 0 in the static structures explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Gayatri Kammela authored
It is common practice to place a comma after the last entry in an initialized array to avoid the need to add one in future patches that extend the array. But when the last element is a termination marker, the comma could be harmful. Any new entries must be added before the terminator (and the comma would prevent the compiler from issuing a warning about an entry after the terminator). Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: David E. Box <david.e.box@intel.com> Cc: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Andy Shevchenko authored
Mainly does: - capitalize gpio and bios to GPIO and BIOS - capitalize beginning of comments - add periods in multi-line comments Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Enrico Weigelt, metux IT consult authored
GPIO stuff on APUv4 seems to be the same as on APUv2, so we just need to match on DMI data. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Enrico Weigelt, metux IT consult authored
The mapping entry has to hold the GPIO line index instead of controller's register number. Fixes: 5037d4dd ("platform/x86: pcengines-apuv2: wire up simswitch gpio as led") Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Michael Haener authored
The CONNECT X300 uses the PMC clock for on-board components and gets stuck during boot if the clock is disabled. Therefore, add this device to the critical systems list. Tested on CONNECT X300. Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: Michael Haener <michael.haener@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Hans de Goede authored
At least on the HP Envy x360 15-cp0xxx model the WMI interface for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes, otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS): Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5 We do not care about the contents of the buffer, we just want to know if the HPWMI_FEATURE2_QUERY command is supported. This commits bumps the buffer size, fixing the error. Fixes: 8a1513b4 ("hp-wmi: limit hotkey enable") Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Liming Sun authored
This is a follow-up commit for the sysfs attributes to change from DRIVER_ATTR to DEVICE_ATTR according to some initial comments. In such case, it's better to point the sysfs path to the device itself instead of the driver. The ABI document is also updated. Fixes: 79e29cb8 ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc") Signed-off-by: Liming Sun <lsun@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
- 15 Dec, 2019 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "A small collection of -rc fixes. Mostly. One API addition, but that's because we wanted to use it in a fix. There's also a bug fix that is going to render the 5.5 kernel's soft-RoCE driver incompatible with all soft-RoCE versions prior, but it's required to actually implement the protocol according to the RoCE spec and required in order for the soft-RoCE driver to be able to successfully work with actual RoCE hardware. Summary: - Update Steve Wise info - Fix for soft-RoCE crc calculations (will break back compatibility, but only with the soft-RoCE driver, which has had this bug since it was introduced and it is an on-the-wire bug, but will make soft-RoCE fully compatible with real RoCE hardware) - cma init fixup - counters oops fix - fix for mlx4 init/teardown sequence - fix for mkx5 steering rules - introduce a cleanup API, which isn't a fix, but we want to use it in the next fix - fix for mlx5 memory management that uses API in previous patch" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix device memory flows IB/core: Introduce rdma_user_mmap_entry_insert_range() API IB/mlx5: Fix steering rule of drop and count IB/mlx4: Follow mirror sequence of device add during device removal RDMA/counter: Prevent auto-binding a QP which are not tracked with res rxe: correctly calculate iCRC for unaligned payloads Update mailmap info for Steve Wise RDMA/cma: add missed unregister_pernet_subsys in init failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Two minor build fixes: - Fix builds of the ELF loader when built with 'make -j1' (nommu only) - Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found during randconfig testing)" * tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: only select serial sifive if TTY is enabled riscv: Fix build dependency for loader
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Two fixes: one for a resource accounting bug in some configurations and a fix for another patch which went into rc1" * tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix ballooned page accounting without hotplug enabled xen-blkback: prevent premature module unload
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linuxLinus Torvalds authored
Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski: "This small series replaces all in-kernel calls to the userspace-focused ksys_mount() and ksys_dup() with calls to kernel-centric functions: For each replacement of ksys_mount() with do_mount(), one needs to verify that the first and third parameter (char *dev_name, char *type) are strings allocated in kernelspace and that the fifth parameter (void *data) is either NULL or refers to a full page (only occurence in init/do_mounts.c::do_mount_root()). The second and fourth parameters (char *dir_name, unsigned long flags) are passed by ksys_mount() to do_mount() unchanged, and therefore do not require particular care. Moreover, instead of pretending to be userspace, the opening of /dev/console as stdin/stdout/stderr can be implemented using in-kernel functions as well. Thereby, ksys_dup() can be removed for good" [ This doesn't get rid of the special "kernel init runs with KERNEL_DS" case, but it at least removes _some_ of the users of "treat kernel pointers as user pointers for our magical init sequence". One day we'll hopefully be rid of it all, and can initialize our init_thread addr_limit to USER_DS. - Linus ] * 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: fs: remove ksys_dup() init: unify opening /dev/console as stdin/stdout/stderr init: use do_mount() instead of ksys_mount() initrd: use do_mount() instead of ksys_mount() devtmpfs: use do_mount() instead of ksys_mount()
-
Linus Torvalds authored
Merge tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fall through fix from Gustavo Silva: "Fix compile error on sh by marking expected switch fall-through" * tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: sh: kgdb: Mark expected switch fall-throughs
-
- 14 Dec, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "24 fixes, all in drivers. The lion's share (16) are qla2xxx and the rest are iscsi (3), ufs (2), smarpqi, lpfc and libsas" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func scsi: iscsi: Fix a potential deadlock in the timeout handler scsi: smartpqi: Update attribute name to `driver_version` scsi: libsas: stop discovering if oob mode is disconnected scsi: ufs: Disable autohibern8 feature in Cadence UFS scsi: iscsi: qla4xxx: fix double free in probe scsi: ufs: Give an unique ID to each ufs-bsg scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI scsi: qla2xxx: Don't defer relogin unconditonally scsi: qla2xxx: Send Notify ACK after N2N PLOGI scsi: qla2xxx: Configure local loop for N2N target scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length scsi: qla2xxx: Don't call qlt_async_event twice scsi: qla2xxx: Allow PLOGI in target mode scsi: qla2xxx: Change discovery state before PLOGI scsi: qla2xxx: Drop superfluous INIT_WORK of del_work scsi: qla2xxx: Initialize free_work before flushing it scsi: qla2xxx: Use explicit LOGO in target mode scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are six small fixes for some reported char/misc driver issues: - fix build warnings with new 'awk' with the raid6 code - four interconnect driver bugfixes - binder fix for reported problem All of these except the binder fix have been in linux-next with no reported issues. The binder fix is "new" but Todd says it is good as he has tested it :)" * tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: fix incorrect calculation for num_valid interconnect: qcom: msm8974: Walk the list safely on node removal interconnect: qcom: qcs404: Walk the list safely on node removal interconnect: qcom: sdm845: Walk the list safely on node removal interconnect: qcom: Fix Kconfig indentation lib: raid6: fix awk build warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are two small driver core fixes to resolve some reported issues The first is to handle the much-reported (by the build systems) problem that superH does not boot anymore. The second handles an issue in the new platform logic that a number of people ran into with the automated tests in kbuild Both of these have been in linux-next with no reported issues" * tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: Fix boot problem on SuperH of/platform: Unconditionally pause/resume sync state during kernel init
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO fixes from Greg KH: "Here are a number of small staging and IIO driver fixes for reported issues for 5.5-rc2 Nothing major, a bunch of tiny IIO driver issues resolved, and some staging driver fixes for things that people ran into with 5.5-rc1. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits) fbtft: Fix the initialization from property algorithm staging: rtl8712: fix interface sanity check staging: rtl8188eu: fix interface sanity check staging: gigaset: add endpoint-type sanity check staging: gigaset: fix illegal free on probe errors staging: gigaset: fix general protection fault on probe staging: vchiq: call unregister_chrdev_region() when driver registration fails staging: exfat: fix multiple definition error of `rename_file' staging/wlan-ng: add CRC32 dependency in Kconfig staging: hp100: Fix build error without ETHERNET staging: fbtft: Do not hardcode SPI CS polarity inversion staging: exfat: properly support discard in clr_alloc_bitmap() staging/octeon: Mark Ethernet driver as BROKEN iio: adc: max9611: Fix too short conversion time delay iio: ad7949: fix channels mixups iio: imu: st_lsm6dsx: do not power-off accel if events are enabled iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask iio: imu: st_lsm6dsx: fix decimation factor estimation iio: imu: inv_mpu6050: fix temperature reporting using bad unit iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB driver fixes for reported issues for 5.5-rc2 There's the usual gadget and xhci fixes, as well as some other problems that syzbot has been finding during it's fuzzing runs. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits) usb: dwc3: pci: add ID for the Intel Comet Lake -H variant xhci: make sure interrupts are restored to correct state xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour. xhci: Increase STS_HALT timeout in xhci_suspend() usb: xhci: only set D3hot for pci device xhci: fix USB3 device initiated resume race with roothub autosuspend xhci: Fix memory leak in xhci_add_in_port() USB: Fix incorrect DMA allocations for local memory pool drivers usb: gadget: fix wrong endpoint desc usb: dwc3: ep0: Clear started flag on completion usb: dwc3: gadget: Clear started flag for non-IOC usb: dwc3: gadget: Fix logical condition USB: atm: ueagle-atm: add missing endpoint check USB: adutux: fix interface sanity check USB: idmouse: fix interface sanity checks USB: serial: io_edgeport: fix epic endpoint lookup usb: mon: Fix a deadlock in usbmon between mmap and read usb: common: usb-conn-gpio: Don't log an error on probe deferral usb: core: urb: fix URB structure initialization function usb: typec: fix use after free in typec_register_port() ...
-