- 17 May, 2017 1 commit
-
-
Rajkumar Manoharan authored
Mesh forwarding path checks for address extension mode to fetch appropriate proxied address and MPP address. Existing condition that looks for 6 address format is not strict enough so that frames with improper values are processed and invalid entries are added into MPP table. Fix that by adding a stricter check before processing the packet. Per IEEE Std 802.11s-2011 spec. Table 7-6g1 lists address extension mode 0x3 as reserved one. And also Table Table 9-13 does not specify 0x3 as valid address field. Fixes: 9b395bc3 ("mac80211: verify that skb data is present") Signed-off-by:
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 08 May, 2017 27 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple more fixes: * don't try to authenticate during reconfiguration, which causes drivers to get confused * fix a kernel-doc warning for a recently merged change * fix MU-MIMO group configuration (relevant only for monitor mode) * more rate flags fix: remove stray RX_ENC_FLAG_40MHZ * fix IBSS probe response allocation size ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jim Baxter authored
The zero padding that is added to NTB's does not zero the memory correctly. This is because the skb_put modifies the value of skb_out->len which results in the memset command not setting any memory to zero as (ctx->tx_max - skb_out->len) == 0. I have resolved this by storing the size of the memory to be zeroed before the skb_put and using this in the memset call. Signed-off-by:
Jim Baxter <jim_baxter@mentor.com> Reviewed-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David S. Miller authored
Andy Shevchenko says: ==================== stmmac: pci: Fix crash on Intel Galileo Gen2 Due to misconfiguration of PCI driver for Intel Quark the user will get a kernel crash: udhcpc: started, v1.26.2 stmmaceth 0000:00:14.6 eth0: device MAC address 98:4f:ee:05:ac:47 Generic PHY stmmac-a6:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-a6:01, irq=-1) stmmaceth 0000:00:14.6 eth0: IEEE 1588-2008 Advanced Timestamp supported stmmaceth 0000:00:14.6 eth0: registered PTP clock IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc: sending discover stmmaceth 0000:00:14.6 eth0: Link is Up - 100Mbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready BUG: unable to handle kernel NULL pointer dereference at (null) IP: stmmac_xmit+0xf1/0x1080 Fix this by adding necessary settings. P.S. I split fix to three patches according to what each of them adds. ==================== Tested-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Andy Shevchenko authored
New helper is added in order to prevent misconfiguration happened for one of the platforms when configuration data is expanded. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
Andy Shevchenko authored
The commit abe80fdc ("net: stmmac: RX queue routing configuration") missed Intel Quark configuration. Append it here. Fixes: abe80fdc ("net: stmmac: RX queue routing configuration") Cc: Joao Pinto <Joao.Pinto@synopsys.com> Signed-off-by:
-
Andy Shevchenko authored
The commit a8f5102a ("net: stmmac: TX and RX queue priority configuration") missed Intel Quark configuration. Append it here. Fixes: a8f5102a ("net: stmmac: TX and RX queue priority configuration") Cc: Joao Pinto <Joao.Pinto@synopsys.com> Signed-off-by:
-
Andy Shevchenko authored
The commit 26d6851f ("net: stmmac: set default number of rx and tx queues in stmmac_pci") missed Intel Quark configuration. Append it here. Fixes: 26d6851f ("net: stmmac: set default number of rx and tx queues in stmmac_pci") Cc: Joao Pinto <Joao.Pinto@synopsys.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Hangbin Liu authored
Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
The patch fixes two things at once: 1) It checks the env->allow_ptr_leaks and only prints the map address to the log if we have the privileges to do so, otherwise it just dumps 0 as we would when kptr_restrict is enabled on %pK. Given the latter is off by default and not every distro sets it, I don't want to rely on this, hence the 0 by default for unprivileged. 2) Printing of ldimm64 in the verifier log is currently broken in that we don't print the full immediate, but only the 32 bit part of the first insn part for ldimm64. Thus, fix this up as well; it's okay to access, since we verified all ldimm64 earlier already (including just constants) through replace_map_fd_with_map_ptr(). Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Fixes: cbd35700 ("bpf: verifier (add ability to receive verification log)") Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Geliang Tang authored
Use memdup_user() helper instead of open-coding to simplify the code. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Geliang Tang authored
Use memdup_user() helper instead of open-coding to simplify the code. Signed-off-by:
-
Ganesh Goudar authored
Recent Chelsio firmware started using few port capablity bits to manage FEC and as driver was not aware of FEC changes those bits were zeroed, consequently disabling FEC. Avoid zeroing those bits and default to whatever the firmware tells us the Link is currently advertising. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Christophe Jaillet authored
If 'devm_kzalloc' fails, a NULL pointer will be dereferenced. Return -ENOMEM instead, as done for some other memory allocation just a few lines above. Fixes: 98cd1552 ("net: dsa: Mock-up driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Signed-off-by:
-
Dan Carpenter authored
We have the number of longs, but we need to calculate the number of bytes required. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Kees Cook authored
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by:
-
Kees Cook authored
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by:
-
Vlad Yasevich authored
Vlan devices, like all other software devices, enable NETIF_F_HW_CSUM feature. However, unlike all the othe other software devices, vlans will switch to using IP|IPV6_CSUM features, if the underlying devices uses them. In these situations, checksum offload features on the vlan device can't be controlled via ethtool. This patch makes vlans keep HW_CSUM feature if the underlying device supports checksum offloading. This makes vlan devices behave like other software devices, and restores control to the user. A side-effect is that some offload settings (typically UFO) may be enabled on the vlan device while being disabled on the HW. However, the GSO code will correctly process the packets. This actually results in slightly better raw throughput. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Wei Wang authored
Congestion control modules that want full control over congestion control behavior do not want the cwnd modifications controlled by the sysctl_tcp_slow_start_after_idle code path. So skip those code paths for CC modules that use the cong_control() API. As an example, those cwnd effects are not desired for the BBR congestion control algorithm. Fixes: c0402760 ("tcp: new CC hook to set sending rate with rate_sample in any CA state") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
WANG Cong authored
IPv4 dst could use fi->fib_metrics to store metrics but fib_info itself is refcnt'ed, so without taking a refcnt fi and fi->fib_metrics could be freed while dst metrics still points to it. This triggers use-after-free as reported by Andrey twice. This patch reverts commit 2860583f ("ipv4: Kill rt->fi") to restore this reference counting. It is a quick fix for -net and -stable, for -net-next, as Eric suggested, we can consider doing reference counting for metrics itself instead of relying on fib_info. IPv6 is very different, it copies or steals the metrics from mx6_config in fib6_commit_metrics() so probably doesn't need a refcnt. Decnet has already done the refcnt'ing, see dn_fib_semantic_match(). Fixes: 2860583f ("ipv4: Kill rt->fi") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Pavel Belous authored
This patch fixes the crash that happens when driver tries to collect statistics from already released "aq_vec" object. If adapter is in "down" state we still allow user to see statistics from HW. V2: fixed braces around "aq_vec_free". Fixes: 97bde5c4 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Tested-by:
David Arcari <darcari@redhat.com> Signed-off-by:
-
Johannes Berg authored
Replace @results_wk with @report_results, which was missed in an earlier patch between revisions thereof. Fixes: b34939b9 ("cfg80211: add request id to cfg80211_sched_scan_*() api") Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Johannes Berg authored
When VHT IBSS support was added, the size of the extra elements wasn't considered in ieee80211_ibss_build_presp(), which makes it possible that it would overrun the allocated buffer. Fix it by allocating the necessary space. Fixes: abcff6ef ("mac80211: add VHT support for IBSS") Reported-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Johannes Berg authored
Since groups 0 and 63 are invalid, we should check for those bits. Note that the 802.11 spec specifies the *bit* order, but the CPU doesn't care about bit order since it can't address bits, so it's always treating BIT(0) as the lowest bit within a byte. Reported-by:
Jan Fuchs <jan.fuchs@lancom.de> Signed-off-by:
-
Luca Coelho authored
If ieee80211_hw_restart() is called during authentication, the authentication process will continue, causing the driver to be called in a wrong state. This ultimately causes an oops in the iwlwifi driver (at least). This fixes bugzilla 195299 partly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
Somehow I missed this in my RX rate cleanup series, causing some drivers to not report correct bandwidth since this flag isn't used by mac80211 anymore. Fix this, and make hwsim also report higher bandwidths appropriately. Signed-off-by:
-
- 05 May, 2017 6 commits
-
-
Rakesh Pandit authored
It was introduced while switching to pci_alloc_irq_vectors recently and fixes: [ 60.527052] alx 0000:03:00.0 enp3s0: Enabling MSI-X interrupts failed! [ 60.529323] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8 [ 60.531589] IP: alx_alloc_napis+0xe6/0x1e0 [alx] [ 60.533831] PGD 0 [ 60.533833] P4D 0 [ 60.540559] Oops: 0002 [#1] SMP [ 60.542759] Modules linked in: ebtables ip6table_filter ip6_tables..... [ 60.549990] drm_kms_helper drm crc32c_intel alx serio_raw mdio wmi video i2c_hid uas usb_storage [ 60.551404] CPU: 0 PID: 999 Comm: NetworkManager Not tainted 4.11.0+ #1 [ 60.552813] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016 [ 60.554219] task: ffff8804ae833c00 task.stack: ffffc90003eec000 [ 60.555383] RIP: 0010:alx_alloc_napis+0xe6/0x1e0 [alx] [ 60.556615] RSP: 0018:ffffc90003eef660 EFLAGS: 00010286 [ 60.557787] RAX: ffff8804962835a0 RBX: ffff8804aee8a8c0 RCX: 0000000000000000 [ 60.558987] RDX: 0000000000000060 RSI: 0000000000000000 RDI: ffff880496283600 [ 60.559979] RBP: ffffc90003eef688 R08: ffff8804c1c1e7e0 R09: ffff8804962835a0 [ 60.560978] R10: ffff8804962835a0 R11: 0000000000000102 R12: 0000000000000000 [ 60.561974] R13: 0000000000000000 R14: ffff8804aee8aaf0 R15: ffffffffa0052ea0 [ 60.562974] FS: 00007f1cecbc9940(0000) GS:ffff8804c1c00000(0000) knlGS:0000000000000000 [ 60.564003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 60.564884] CR2: 00000000000000b8 CR3: 0000000496025000 CR4: 00000000003406f0 [ 60.565782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 60.566676] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 60.567560] Call Trace: [ 60.568500] __alx_open+0xa2/0x570 [alx] [ 60.569355] ? notifier_call_chain+0x4a/0x70 [ 60.570144] alx_open+0x17/0x20 [alx] [ 60.570909] __dev_open+0xc6/0x140 [ 60.571682] ? _raw_spin_unlock_bh+0x1a/0x20 [ 60.572469] __dev_change_flags+0x9d/0x160 [ 60.573252] dev_change_flags+0x29/0x60 [ 60.574070] do_setlink+0x32e/0xc90 [ 60.574815] ? ttwu_do_activate+0x77/0x80 [ 60.575544] ? drm_fb_helper_dirty.isra.17+0xc7/0xe0 [drm_kms_helper] [ 60.576273] ? drm_fb_helper_cfb_imageblit+0x30/0x40 [drm_kms_helper] [ 60.577004] ? bit_putcs+0x2f7/0x560 [ 60.577729] ? nla_parse+0x35/0x140 [ 60.578518] rtnl_newlink+0x7d3/0x900 [ 60.579280] ? security_capset+0x30/0x80 [ 60.580029] ? ns_capable_common+0x68/0x80 [ 60.580747] ? ns_capable+0x13/0x20 [ 60.581453] rtnetlink_rcv_msg+0xee/0x220 [ 60.582198] ? rtnl_newlink+0x900/0x900 [ 60.582909] netlink_rcv_skb+0xe7/0x120 [ 60.583601] rtnetlink_rcv+0x28/0x30 [ 60.584303] netlink_unicast+0x18c/0x220 [ 60.585002] netlink_sendmsg+0x2ba/0x3b0 [ 60.585703] sock_sendmsg+0x38/0x50 [ 60.586436] ___sys_sendmsg+0x2b6/0x2d0 [ 60.587123] ? lockref_put_or_lock+0x5e/0x80 [ 60.587822] ? dput+0x155/0x1d0 [ 60.588518] ? mntput+0x24/0x40 [ 60.589215] __sys_sendmsg+0x54/0x90 [ 60.589907] ? __sys_sendmsg+0x54/0x90 [ 60.590627] SyS_sendmsg+0x12/0x20 [ 60.591333] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 60.592021] RIP: 0033:0x7f1ceb44e3b0 [ 60.592697] RSP: 002b:00007fffd7f0a2d0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 60.593385] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1ceb44e3b0 [ 60.594107] RDX: 0000000000000000 RSI: 00007fffd7f0a380 RDI: 000000000000000c [ 60.594798] RBP: 00007fffd7f0a800 R08: 0000000000000000 R09: 0000000000000000 [ 60.595502] R10: 0000564ffbae6e20 R11: 0000000000000293 R12: 0000000000000001 [ 60.596200] R13: 0000000000000002 R14: 0000000000000010 R15: 00007fffd7f0a4d0 [ 60.596899] Code: ed 85 c9 0f 8f ec 00 00 00 48 8b 3d 9d 97 1a e2 ba 50 00 00 00 be c0 80 40 01 4c 8b a3 30 02 00 00 e8 ff e5 1d e1 48 85 c0 74 a3 <49> 89 84 24 b8 00 00 00 48 8b 93 30 02 00 00 48 8b 4b 08 48 89 [ 60.597642] RIP: alx_alloc_napis+0xe6/0x1e0 [alx] RSP: ffffc90003eef660 [ 60.598427] CR2: 00000000000000b8 Fixes: f3297f68 ("net: alx: switch to pci_alloc_irq_vectors") Signed-off-by:
Rakesh Pandit <rakesh@tuxera.com> Signed-off-by:
-
Eric Dumazet authored
Whole point of randomization was to hide server uptime, but an attacker can simply start a syn flood and TCP generates 'old style' timestamps, directly revealing server jiffies value. Also, TSval sent by the server to a particular remote address vary depending on syncookies being sent or not, potentially triggering PAWS drops for innocent clients. Lets implement proper randomization, including for SYNcookies. Also we do not need to export sysctl_tcp_timestamps, since it is not used from a module. In v2, I added Florian feedback and contribution, adding tsoff to tcp_get_cookie_sock(). v3 removed one unused variable in tcp_v4_connect() as Florian spotted. Fixes: 95a22cae ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by:
Florian Westphal <fw@strlen.de> Tested-by:
-
Tobias Klauser authored
The attribute sizes for IFLA_BRPORT_MCAST_FLOOD and IFLA_BRPORT_BCAST_FLOOD weren't accounted for in br_port_info_size() when they were added. Do so now and also add the corresponding policy entries: Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Mike Manning <mmanning@brocade.com> Fixes: b6cb5ac8 ("net: bridge: add per-port multicast flood flag") Fixes: 99f906e9 ("bridge: add per-port broadcast flood flag") Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver updates from Greg KH: "Here is the big set of new char/misc driver drivers and features for 4.12-rc1. There's lots of new drivers added this time around, new firmware drivers from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and a bunch of other driver updates. Nothing major, except if you happen to have the hardware for these drivers, and then you will be happy :) All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits) firmware: google memconsole: Fix return value check in platform_memconsole_init() firmware: Google VPD: Fix return value check in vpd_platform_init() goldfish_pipe: fix build warning about using too much stack. goldfish_pipe: An implementation of more parallel pipe fpga fr br: update supported version numbers fpga: region: release FPGA region reference in error path fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe() mei: drop the TODO from samples firmware: Google VPD sysfs driver firmware: Google VPD: import lib_vpd source files misc: lkdtm: Add volatile to intentional NULL pointer reference eeprom: idt_89hpesx: Add OF device ID table misc: ds1682: Add OF device ID table misc: tsl2550: Add OF device ID table w1: Remove unneeded use of assert() and remove w1_log.h w1: Use kernel common min() implementation uio_mf624: Align memory regions to page size and set correct offsets uio_mf624: Refactor memory info initialization uio: Allow handling of non page-aligned memory regions hangcheck-timer: Fix typo in comment ...
-
Linus Torvalds authored
Merge tag 'driver-core-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Very tiny pull request for 4.12-rc1 for the driver core this time around. There are some documentation fixes, an eventpoll.h fixup to make it easier for the libc developers to take our header files directly, and some very minor driver core fixes and changes. All have been in linux-next for a very long time with no reported issues" * tag 'driver-core-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "kref: double kref_put() in my_data_handler()" driver core: don't initialize 'parent' in device_add() drivers: base: dma-mapping: use nth_page helper Documentation/ABI: add information about cpu_capacity debugfs: set no_llseek in DEFINE_DEBUGFS_ATTRIBUTE eventpoll.h: add missing epoll event masks eventpoll.h: fix epoll event masks
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB updates from Greg KH: "Here is the big USB patchset for 4.12-rc1. Lots of good stuff here, after many many many attempts, the kernel finally has a working typeC interface, many thanks to Heikki and Guenter and others who have taken the time to get this merged. It wasn't an easy path for them at all. There's also a staging driver that uses this new api, which is why it's coming in through this tree. Along with that, there's the usual huge number of changes for gadget drivers, xhci, and other stuff. Johan also finally refactored pretty much every driver that was looking at USB endpoints to do it in a common way, which will help prevent any "badly-formed" devices from causing problems in drivers. That too wasn't a simple task. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) staging: typec: Fairchild FUSB302 Type-c chip driver staging: typec: Type-C Port Controller Interface driver (tcpci) staging: typec: USB Type-C Port Manager (tcpm) usb: host: xhci: remove #ifdef around PM functions usb: musb: don't mark of_dev_auxdata as initdata usb: misc: legousbtower: Fix buffers on stack USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" usb: Make sure usb/phy/of gets built-in USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h usb: host: xhci: print correct command ring address usb: host: xhci: delete sp_dma_buffers for scratchpad usb: host: xhci: using correct specification chapter reference for DCBAAP xhci: switch to pci_alloc_irq_vectors usb: host: xhci-plat: set resume_quirk() for R-Car controllers usb: host: xhci-plat: add resume_quirk() usb: host: xhci-plat: enable clk in resume timing usb: host: plat: Enable xHCI plat runtime PM USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit USB: serial: constify static arrays usb: fix some references for /proc/bus/usb ...
-
- 04 May, 2017 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) The wireless rate info fix from Johannes Berg. 2) When a RAW socket is in hdrincl mode, we need to make sure that the user provided at least a minimally sized ipv4/ipv6 header. Fix from Alexander Potapenko. 3) We must emit IFLA_PHYS_PORT_NAME netlink attributes using nla_put_string() so that it is NULL terminated. 4) Fix a bug in TCP fastopen handling, wherein child sockets erroneously inherit the fastopen_req from the parent, and later can end up derefencing freed memory or doing a double free. From Eric Dumazet. 5) Don't clear out netdev stats at close time in tg3 driver, from YueHaibing. 6) Fix refcount leak in xt_CT, from Gao Feng. 7) In nft_set_bitmap() don't leak dummy elements, from Liping Zhang. 8) Fix deadlock due to taking the expectation lock twice, also from Liping Zhang. 9) Make xt_socket work again with ipv6, from Peter Tirsek. 10) Don't allow IPV6 to be used with IPVS if ipv6.disable=1, from Paolo Abeni. 11) Make the BPF loader more flexible wrt. changes to the bpf MAP entry layout. From Jesper Dangaard Brouer. 12) Fix ethtool reported device name in aquantia driver, from Pavel Belous. 13) Fix build failures due to the compile time size test not working in netfilter conntrack. From Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) cfg80211: make RATE_INFO_BW_20 the default ipv6: initialize route null entry in addrconf_init() qede: Fix possible misconfiguration of advertised autoneg value. qed: Fix overriding of supported autoneg value. qed*: Fix possible overflow for status block id field. rtnetlink: NUL-terminate IFLA_PHYS_PORT_NAME string netvsc: make sure napi enabled before vmbus_open aquantia: Fix driver name reported by ethtool ipv4, ipv6: ensure raw socket message is big enough to hold an IP header net/sched: remove redundant null check on head tcp: do not inherit fastopen_req from parent forcedeth: remove unnecessary carrier status check ibmvnic: Move queue restarting in ibmvnic_tx_complete ibmvnic: Record SKB RX queue during poll ibmvnic: Continue skb processing after skb completion error ibmvnic: Check for driver reset first in ibmvnic_xmit ibmvnic: Wait for any pending scrqs entries at driver close ibmvnic: Clean up tx pools when closing ibmvnic: Whitespace correction in release_rx_pools ibmvnic: Delete napi's when releasing driver resources ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the usual amount of cosmetic and spelling stuff" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits) scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template" scsi: stex: make S6flag static scsi: mac_esp: fix to pass correct device identity to free_irq() scsi: aacraid: pci_alloc_consistent() failures on ARM64 scsi: ufs: make ufshcd_get_lists_status() register operation obvious scsi: ufs: use MASK_EE_STATUS scsi: mac_esp: Replace bogus memory barrier with spinlock scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static scsi: sd_zbc: Do not write lock zones for reset scsi: sd_zbc: Remove superfluous assignments scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd scsi: Improve scsi_get_sense_info_fld scsi: sd: Cleanup sd_done sense data handling scsi: sd: Improve sd_completed_bytes scsi: sd: Fix function descriptions scsi: mpt3sas: remove redundant wmb scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host() scsi: sg: reset 'res_in_use' after unlinking reserved array scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.12 kernel cycle. Core changes: - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers: - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements: - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot" * tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: f7188x: Add a missing break gpio: omap: return error if requested debounce time is not possible gpio: Add ROHM BD9571MWV-M PMIC GPIO driver gpio: gpio-wcove: fix GPIO IRQ status mask gpio: DT bindings, move tca9554 from pcf857x to pca953x gpio: move tca9554 from pcf857x to pca953x gpio: arizona: Correct check whether the pin is an input gpio: Add XRA1403 DTS binding documentation dt-bindings: add exar to vendor prefixes list gpio: gpio-wcove: fix irq pending status bit width gpio: dwapb: use dwapb_read instead of readl_relaxed gpio: aspeed: Add open-source and open-drain support gpio: aspeed: Add debounce support gpio: aspeed: dt: Add optional clocks property gpio: aspeed: dt: Fix description alignment in bindings document gpio: mvebu: Add limited PWM support gpio: Use unsigned int for interrupt numbers gpio: f7188x: Add F71889A GPIO support. gpio: core: Decouple open drain/source flag with active low/high gpio: arizona: Correct handling for reading input GPIOs ... -
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform-drivers update from Darren Hart: "This represents a significantly larger and more complex set of changes than those of prior merge windows. In particular, we had several changes with dependencies on other subsystems which we felt were best managed through merges of immutable branches, including one each from input, i2c, and leds. Two patches for the watchdog subsystem are included after discussion with Wim and Guenter following a collision in linux-next (this should be resolved and you should only see these two appear in this pull request). These are called out in the "External" section below. Summary of changes: - significant further cleanup of fujitsu-laptop and hp-wmi - new model support for ideapad, asus, silead, and xiaomi - new hotkeys for thinkpad and models using intel-vbtn - dell keyboard backlight improvements - build and dependency improvements - intel * ipc fixes, cleanups, and api updates - single isolated fixes noted below External: - watchdog: iTCO_wdt: Add PMC specific noreboot update api - watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions - Merge branch 'ib/4.10-sparse-keymap-managed' - Merge branch 'i2c/for-INT33FE' - Merge branch 'linux-leds/dell-laptop-changes-for-4.12' platform/x86: - Add Intel Cherry Trail ACPI INT33FE device driver - remove sparse_keymap_free() calls - Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD asus-wmi: - try to set als by default - fix cpufv sysfs file permission acer-wmi: - setup accelerometer when ACPI device was found ideapad-laptop: - Add IdeaPad V310-15ISK to no_hw_rfkill - Add IdeaPad 310-15IKB to no_hw_rfkill intel_pmc_ipc: - use gcr mem base for S0ix counter read - Fix iTCO_wdt GCS memory mapping failure - Add pmc gcr read/write/update api's - fix gcr offset dell-laptop: - Add keyboard backlight timeout AC settings - Handle return error form dell_get_intensity. - Protect kbd_state against races - Refactor kbd_led_triggers_store() hp-wireless: - reuse module_acpi_driver - add Xiaomi's hardware id to the supported list intel-vbtn: - add volume up and down INT33FE: - add i2c dependency hp-wmi: - Cleanup exit paths - Do not shadow errors in sysfs show functions - Use DEVICE_ATTR_(RO|RW) helper macros - Refactor dock and tablet state fetchers - Cleanup wireless get_(hw|sw)state functions - Refactor redundant HPWMI_READ functions - Standardize enum usage for constants - Cleanup local variable declarations - Do not shadow error values - Fix detection for dock and tablet mode - Fix error value for hp_wmi_tablet_state fujitsu-laptop: - simplify error handling in acpi_fujitsu_laptop_add() - do not log LED registration failures - switch to managed LED class devices - reorganize LED-related code - refactor LED registration - select LEDS_CLASS - remove redundant fields from struct fujitsu_bl - account for backlight power when determining brightness - do not log set_lcd_level() failures in bl_update_status() - ignore errors when setting backlight power - make disable_brightness_adjust a boolean - clean up use_alt_lcd_levels handling - sync brightness in set_lcd_level() - simplify set_lcd_level() - merge set_lcd_level_alt() into set_lcd_level() - switch to a managed backlight device - only handle backlight when appropriate - update debug message logged by call_fext_func() - rename call_fext_func() arguments - simplify call_fext_func() - clean up local variables in call_fext_func() - remove keycode fields from struct fujitsu_bl - model-dependent sparse keymap overrides - use a sparse keymap for hotkey event generation - switch to a managed hotkey input device - refactor hotkey input device setup - use a sparse keymap for brightness key events - switch to a managed backlight input device - refactor backlight input device setup - remove pf_device field from struct fujitsu_bl - only register platform device if FUJ02E3 is present - add and remove platform device in separate functions - simplify platform device attribute definitions - remove backlight-related attributes from the platform device - cleanup error labels in fujitsu_init() - only register backlight device if FUJ02B1 is present - sync backlight power status in acpi_fujitsu_laptop_add() - register backlight device in a separate function - simplify brightness key event generation logic - decrease indentation in acpi_fujitsu_bl_notify() intel-hid: - Add missing ->thaw callback - do not set parents of input devices explicitly - remove redundant set_bit() call - use devm_input_allocate_device() for HID events input device - make intel_hid_set_enable() take a boolean argument - simplify enabling/disabling HID events silead_dmi: - Add touchscreen info for Surftab Wintron 7.0 - Abort early if DMI does not match - Do not treat all devices as i2c_clients - Add entry for Insyde 7W tablets - Constify properties arrays intel_scu_ipc: - Introduce intel_scu_ipc_raw_command() - Introduce SCU_DEVICE() macro - Remove redundant subarch check - Rearrange init sequence - Platform data is mandatory asus-nb-wmi: - Add wapf4 quirk for the X302UA dell-*: - Call new led hw_changed API on kbd brightness change - Add a generic dell-laptop notifier chain eeepc-laptop: - Skip unknown key messages 0x50 0x51 thinkpad_acpi: - add mapping for new hotkeys - guard generic hotkey case" * tag 'platform-drivers-x86-v4.12-1' of git://git.infradead.org/linux-platform-drivers-x86: (108 commits) platform/x86: Make SILEAD_DMI depend on TOUCHSCREEN_SILEAD platform/x86: asus-wmi: try to set als by default platform/x86: asus-wmi: fix cpufv sysfs file permission platform/x86: acer-wmi: setup accelerometer when ACPI device was found platform/x86: ideapad-laptop: Add IdeaPad V310-15ISK to no_hw_rfkill platform/x86: intel_pmc_ipc: use gcr mem base for S0ix counter read platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure watchdog: iTCO_wdt: Add PMC specific noreboot update api watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functions platform/x86: intel_pmc_ipc: Add pmc gcr read/write/update api's platform/x86: intel_pmc_ipc: fix gcr offset platform/x86: dell-laptop: Add keyboard backlight timeout AC settings platform/x86: dell-laptop: Handle return error form dell_get_intensity. platform/x86: hp-wireless: reuse module_acpi_driver platform/x86: intel-vbtn: add volume up and down platform/x86: INT33FE: add i2c dependency platform/x86: hp-wmi: Cleanup exit paths platform/x86: hp-wmi: Do not shadow errors in sysfs show functions platform/x86: hp-wmi: Use DEVICE_ATTR_(RO|RW) helper macros platform/x86: hp-wmi: Refactor dock and tablet state fetchers ...
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Updates for SPAPR IOMMU backend including compatibility test and memory allocation check (Alexey Kardashevskiy) - Updates for type1 IOMMU backend to remove asynchronous locked page accounting and remove redundancy (Alex Williamson) * tag 'vfio-v4.12-rc1' of git://github.com/awilliam/linux-vfio: vfio/type1: Reduce repetitive calls in vfio_pin_pages_remote() vfio/type1: Prune vfio_pin_page_external() vfio/type1: Remove locked page accounting workqueue vfio/spapr_tce: Check kzalloc() return when preregistering memory vfio/powerpc/spapr_tce: Enforce IOMMU type compatibility check
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen updates from Juergen Gross: "Xen fixes and featrues for 4.12. The main changes are: - enable building the kernel with Xen support but without enabling paravirtualized mode (Vitaly Kuznetsov) - add a new 9pfs xen frontend driver (Stefano Stabellini) - simplify Xen's cpuid handling by making use of cpu capabilities (Juergen Gross) - add/modify some headers for new Xen paravirtualized devices (Oleksandr Andrushchenko) - EFI reset_system support under Xen (Julien Grall) - and the usual cleanups and corrections" * tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (57 commits) xen: Move xen_have_vector_callback definition to enlighten.c xen: Implement EFI reset_system callback arm/xen: Consolidate calls to shutdown hypercall in a single helper xen: Export xen_reboot xen/x86: Call xen_smp_intr_init_pv() on BSP xen: Revert commits da72ff5b and 72a9b186 xen/pvh: Do not fill kernel's e820 map in init_pvh_bootparams() xen/scsifront: use offset_in_page() macro xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_ops xen/arm,arm64: fix xen_dma_ops after 815dd187 "Consolidate get_dma_ops..." xen/9pfs: select CONFIG_XEN_XENBUS_FRONTEND x86/cpu: remove hypervisor specific set_cpu_features vmware: set cpu capabilities during platform initialization x86/xen: use capabilities instead of fake cpuid values for xsave x86/xen: use capabilities instead of fake cpuid values for x2apic x86/xen: use capabilities instead of fake cpuid values for mwait x86/xen: use capabilities instead of fake cpuid values for acpi x86/xen: use capabilities instead of fake cpuid values for acc x86/xen: use capabilities instead of fake cpuid values for mtrr x86/xen: use capabilities instead of fake cpuid values for aperf ...
-
