- 02 Dec, 2014 17 commits
-
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Left-over from before a rework a while back. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Logging at trace level, rather than as en error, as it seems conceivable that failure could be normal under certain circumstances (new bios, older sink that doesn't support a particular DPCD address) Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Starting from GM204, certain registers are no longer accessible by the host (or unsigned PMU firmware). This commit implements devinit on PMU, using a signed microcode image, and devinit data, from the VBIOS. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The field at +0x2 is technically processor specific, though I don't know that it's ever mattered in practice (yet). Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
We're about to need to be able to fetch additional chunks of data beyond the primary bios image, which makes fetching a lot more complicated. This splits out the verious shadowing routines to be nothing more than very dumb "fetch this much data from this offset" routines, and leaves the logic of what and how much to fetch in common code. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Vince Hsu authored
Some Tegra drivers might be compiled as kernel modules, and they need the fuse information for initialization. One example is the GK20A Nouveau driver. It needs the GPU speedo value to calculate frequency-voltage table. So export the tegra_sku_info. Signed-off-by: Vince Hsu <vinceh@nvidia.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
- 01 Dec, 2014 2 commits
-
-
Laurent Pinchart authored
Platform data support has been removed from the DU driver, drop DU support from the legacy Marzen board file. The multiplatform DT-based Marzen support should be used instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Laurent Pinchart authored
Platform data support has been removed from the DU driver, drop DU support from the legacy Lager board file. The multiplatform DT-based Lager support should be used instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 26 Nov, 2014 13 commits
-
-
git://linuxtv.org/pinchartl/fbdevDave Airlie authored
The branch is based on a merge of drm-next and Simon's tags/renesas-dt-du-for- v3.19 available at git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git, the latter having been pulled in the ARM SoC tree for v3.19. Compared to v1, I've rebased my branch on a later drm-next, added Julia's error return code fix, and documented the "drm: Decouple EDID parsing from I2C adapter" patch properly. v1: Here's a pull request that adds HDMI support to the R-Car DU driver, including a new slave encoder driver for the adv7511. * 'drm/du/adv7511' of git://linuxtv.org/pinchartl/fbdev: drm: Add adv7511 encoder driver video: Add ADV751[13] DT bindings documentation drm: Decouple EDID parsing from I2C adapter drm: rcar-du: Add HDMI encoder and connector support drm: rcar-du: Replace drm_encoder with drm_slave_encoder drm: rcar-du: Replace direct DRM encoder access with cast macro drm: rcar-du: Pass the encoder DT node to rcar_du_encoder_init() drm: rcar-du: Remove platform data support drm: rcar-du: fix error return code ARM: shmobile: koelsch: Enable DU device in DT ARM: shmobile: koelsch-reference: Remove DU platform device ARM: shmobile: lager: Enable DU device in DT ARM: shmobile: lager-reference: Remove DU platform device ARM: shmobile: marzen: Enable DU device in DT ARM: shmobile: dts: Add common file for AA104XD12 panel ARM: shmobile: r8a7791: Add DU node to device tree ARM: shmobile: r8a7790: Add DU node to device tree ARM: shmobile: r8a7779: Add DU node to device tree ARM: shmobile: Remove FSF address from copyright headers
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
- Fixes for sparse warnings - Memory leak fixes - Fix for deadlock between amdkfd and iommu * 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux: amdkfd: delete some dead code amdkfd: Fix memory leak of mqds on dqm fini amdkfd: fix an error handling bug in pqm_create_queue() amdkfd: fix some error handling in ioctl amdkfd: Remove DRM_AMDGPU dependency from Kconfig amdkfd: explicitely include io.h in kfd_doorbell.c amdkfd: Clear ctx cb before suspend amdkfd: Instead of using get function, use container_of amdkfd: use schedule() in sync_with_hw amdkfd: Fix memory leak on process deregistration amdkfd: add __iomem attribute to doorbell_ptr amdkfd: fence_wait_timeout() can be static amdkfd: is_occupied() can be static amdkfd: Fix sparse warnings in kfd_flat_memory.c amdkfd: pqm_get_kernel_queue() can be static amdkfd: test_kq() can be static amdkfd: Fix sparse warnings in kfd_topology.c amdkfd: Fix sparse warnings in kfd_chardev.c
-
Lars-Peter Clausen authored
This patch adds a driver for the Analog Devices adv7511. The adv7511 is a standalone HDMI transmitter chip. It features a HDMI output interface on one end and video and audio input interfaces on the other. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters compatible with HDMI 1.4 and DVI 1.0. They're described in DT using the OF graph bindings and a list of custom properties pertaining to the input video bus configuration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Lars-Peter Clausen authored
The drm_get_edid() function performs direct I2C accesses to read EDID blocks, assuming that the monitor DDC interface is directly connected to the I2C bus. It can't thus be used with HDMI encoders that control the DDC bus and expose EDID blocks through a different interface. Refactor drm_do_get_edid() to take a block read callback function instead of an I2C adapter, and export it for direct use by drivers. As in the general case the DDC bus is accessible by the kernel at the I2C level, drivers must make all reasonable efforts to expose it as an I2C adapter and use drm_get_edid() instead of abusing this function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Laurent Pinchart authored
SoCs that integrate the DU have no internal HDMI encoder, support external encoders only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
DRM slave encoders require their associated struct drm_encoder instance to be embedded in a struct drm_slave_encoder. This makes processing encoders regardless of their types needlessly and painfully complex in drivers that use a mix of slave encoders and custom encoders. Such a driver will need to either create drm_slave_encoder instances that fake their embedded encoder instance, or to turn all drm_encoder instances into drm_slave_encoder instances. Between the two evils, one must choose the lesser. Use drm_slave_encoder everywhere. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
Add a new macro to downcast an rcar_du_encoder pointer to a drm_encoder pointer and use it. This prepares for the replacement of the rcar_drm_encoder encoder field with a drm_slave_encoder. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
The encoder DT node will be needed to register an external HDMI encoder. Pass it to the rcar_du_encoder_init() function to prepare for HDMI support. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
All platforms now instantiate the DU through DT, platform data support isn't needed anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Julia Lawall authored
Propagate the error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Haixia Shi authored
The drm_prime_pages_to_sg() function never returns NULL pointers, only error pointers and valid pointers. Signed-off-by: Haixia Shi <hshi@chromium.org> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Haixia Shi authored
Fixes dmabuf export failure with -E_NOMEM when the page is not mapped. Signed-off-by: Haixia Shi <hshi@chromium.org> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 25 Nov, 2014 8 commits
-
-
Philipp Zabel authored
Add myself as the maintainer of the i.MX DRM driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Philipp Zabel authored
The imx-drm driver was put into staging mostly for the following reasons, all of which have been addressed or superseded: - convert the irq driver to use linear irq domains - work out the device tree bindings, this lead to the common of_graph bindings being used - factor out common helper functions, this mostly resulted in the component framework and drm of_graph helpers. Before adding new fixes, and certainly before adding new features, move it into its proper place below drivers/gpu/drm. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Laurent Pinchart authored
Renesas ARM Based SoC DT DU Updates for v3.19 * Enable DU using DT on marzen/r8a7779, lager/r8a7790 and koelsch/r8a7791
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Add Exynos4415 SoC support, some fixups and cleanups. Summary: - Resolve kernel lockup issue incurred by probe request in probe context. . For this, it moves all register codes of sub drivers into init function and adds component binding support for vidi driver. - Add Exynos4415 SoC support. - Make each manager and display object to be embedded in each driver context. - Fix and clean up FIMD and MIPI-DSI drivers. - Clean up unnecesary or wrong descriptions. - And trivial cleanups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (58 commits) drm/exynos: avoid leak if exynos_dpi_probe() fails drm/exynos: Fix exynos_dpi_remove() parameter drm/exynos: vidi: add component support drm/exynos: fix exynos_drm_component_del drm/exynos/ipp: fix error return code drm/exynos: clean up machine compatible string check drm/exynos: move Exynos platform drivers registration to init Revert "drm/exynos: fix null pointer dereference issue" drm/exynos/dpi: stop using display->ctx pointer drm/exynos/dpi: embed display into private context drm/exynos/dp: stop using display->ctx pointer drm/exynos/dp: embed display into private context drm/exynos/vidi: stop using display->ctx pointer drm/exynos/vidi: embed display into private context drm/exynos/hdmi: stop using display->ctx pointer drm/exynos/hdmi: embed display into private context drm/exynos/fimd: stop using manager->ctx pointer drm/exynos/fimd: embed manager into private context drm/exynos/vidi: stop using manager->ctx pointer drm/exynos/vidi: embed manager into private context ...
-
Dan Carpenter authored
This is dead code. We don't need to unbind here, we can just return directly. Reviewed-by: Oded Gabbay <oded.gabbay@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
-
Oded Gabbay authored
The mqds array members are not freed when dqm is uninitialized. Reviewed-by: Ben Goz <Ben.Goz@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
Now that we have the bits needed for mdp5 atomic, here is the followup pull request I mentioned. Main highlights are: 1) mdp5 multiple crtc and public plane support (no more hard-coded mixer setup!) 2) mdp5 atomic conversion 3) couple atomic helper fixes for issues found during mdp5 atomic debug (reviewed by danvet.. but he didn't plane to send an atomic-fixes pull request so I agreed to tack them on to mine) * 'msm-next' of git://people.freedesktop.org/~robclark/linux: drm/atomic: shutdown *current* encoder drm/atomic: check mode_changed *after* atomic_check drm/msm/mdp4: fix mixer setup for multi-crtc + planes drm/msm/mdp5: dpms(OFF) cleanups drm/msm/mdp5: atomic drm/msm: atomic fixes drm/msm/mdp5: remove global mdp5_ctl_mgr drm/msm/mdp5: don't use void * for opaque types drm/msm: add multiple CRTC and overlay support drm/msm/mdp5: set rate before enabling clk drm/msm/mdp5: introduce mdp5_cfg module drm/msm/mdp5: make SMP module dynamically configurable drm/msm/hdmi: remove useless kref drm/msm/mdp5: get the core clock rate from MDP5 config drm/msm/mdp5: use irqdomains
-
Dan Carpenter authored
The call to kernel_queue_uninit(NULL) will trigger a BUG(), and also the error code is incorrect. Fixes: 45102048 ('amdkfd: Add process queue manager module') Reviewed-by: Oded Gabbay <oded.gabbay@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
-