- 06 Sep, 2019 10 commits
-
-
Fam Zheng authored
This function will be useful when we update weight from the soon-coming per-device interface. Signed-off-by:
Fam Zheng <zhengfeiran@bytedance.com> Reviewed-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Fam Zheng authored
The comment of bfq_group_set_weight says the reading of prio_changed should happen before the reading of weight, but a memory barrier is missing here. Add it now, to match the smp_wmb() there. Signed-off-by:
-
Jens Axboe authored
The lookup logic is broken - 'e' will never be NULL, even if the list is empty. Maintain lookup hit in a separate variable instead. Fixes: a0958ba7 ("block: Improve default elevator selection") Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Damien Le Moal authored
Using the helper blk_queue_required_elevator_features(), set the elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request queue of SCSI ZBC disks. This feature requirement can always be satisfied as the mq-deadline elevator is always selected for in-kernel compilation when CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Damien Le Moal authored
Using the helper blk_queue_required_elevator_features(), set the elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request queue of null_blk devices created with zoned mode enabled. This feature requirement can always be satisfied as the mq-deadline elevator is always selected for in-kernel compilation when CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled. Reviewed-by:
-
Damien Le Moal authored
When elevator_init_mq() is called from blk_mq_init_allocated_queue(), the only information known about the device is the number of hardware queues as the block device scan by the device driver is not completed yet for most drivers. The device type and elevator required features are not set yet, preventing to correctly select the default elevator most suitable for the device. This currently affects all multi-queue zoned block devices which default to the "none" elevator instead of the required "mq-deadline" elevator. These drives currently include host-managed SMR disks connected to a smartpqi HBA and null_blk block devices with zoned mode enabled. Upcoming NVMe Zoned Namespace devices will also be affected. Fix this by adding the boolean elevator_init argument to blk_mq_init_allocated_queue() to control the execution of elevator_init_mq(). Two cases exist: 1) elevator_init = false is used for calls to blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this case, a call to elevator_init_mq() is added to __device_add_disk(), resulting in the delayed initialization of the queue elevator after the device driver finished probing the device information. This effectively allows elevator_init_mq() access to more information about the device. 2) elevator_init = true preserves the current behavior of initializing the elevator directly from blk_mq_init_allocated_queue(). This case is used for the special request based DM devices where the device gendisk is created before the queue initialization and device information (e.g. queue limits) is already known when the queue initialization is executed. Additionally, to make sure that the elevator initialization is never done while requests are in-flight (there should be none when the device driver calls device_add_disk()), freeze and quiesce the device request queue before calling blk_mq_init_sched() in elevator_init_mq(). Reviewed-by:
-
Damien Le Moal authored
For block devices that do not specify required features, preserve the current default elevator selection (mq-deadline for single queue devices, none for multi-queue devices). However, for devices specifying required features (e.g. zoned block devices ELEVATOR_F_ZBD_SEQ_WRITE feature), select the first available elevator providing the required features. In all cases, default to "none" if no elevator is available or if the initialization of the default elevator fails. Reviewed-by:
-
Damien Le Moal authored
Introduce the definition of elevator features through the elevator_features flags in the elevator_type structure. Each flag can represent a feature supported by an elevator. The first feature defined by this patch is support for zoned block device sequential write constraint with the flag ELEVATOR_F_ZBD_SEQ_WRITE, which is implemented by the mq-deadline elevator using zone write locking. Other possible features are IO priorities, write hints, latency targets or single-LUN dual-actuator disks (for which the elevator could maintain one LBA ordered list per actuator). The required_elevator_features field is also added to the request_queue structure to allow a device driver to specify elevator feature flags that an elevator must support for the correct operation of the device (e.g. device drivers for zoned block devices can have the ELEVATOR_F_ZBD_SEQ_WRITE flag as a required feature). The helper function blk_queue_required_elevator_features() is defined for setting this new field. With these two new fields in place, the elevator functions elevator_match() and elevator_find() are modified to allow a user to set only an elevator with a set of features that satisfies the device required features. Elevators not matching the device requirements are not shown in the device sysfs queue/scheduler file to prevent their use. The "none" elevator can always be selected as before. Reviewed-by:
-
Damien Le Moal authored
If the default elevator chosen is mq-deadline, elevator_init_mq() may return an error if mq-deadline initialization fails, leading to blk_mq_init_allocated_queue() returning an error, which in turn will cause the block device initialization to fail and the device not being exposed. Instead of taking such extreme measure, handle mq-deadline initialization failures in the same manner as when mq-deadline is not available (no module to load), that is, default to the "none" scheduler. With this change, elevator_init_mq() return type can be changed to void. Reviewed-by:
-
Damien Le Moal authored
Instead of checking a queue tag_set BLK_MQ_F_NO_SCHED flag before calling elevator_init_mq() to make sure that the queue supports IO scheduling, use the elevator.c function elv_support_iosched() in elevator_init_mq(). This does not introduce any functional change but ensure that elevator_init_mq() does the right thing based on the queue settings. Reviewed-by:
-
- 05 Sep, 2019 2 commits
-
-
Minwoo Im authored
If userspace requests target to be removed, nvm_remove_tgt() will iterate the nvm_devices to find out the given target, but if not found, then it should print out an error. Signed-off-by:
Minwoo Im <minwoo.im.dev@gmail.com> Updated output string and patch description. Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
-
Minwoo Im authored
all the pr_() family can have this prefix by pr_fmt. Signed-off-by:
Javier González <javier@javigon.com> Signed-off-by:
-
- 04 Sep, 2019 4 commits
-
-
zhengbin authored
If alloc_disk fails in pcd_init_units, cd->disk & pi are empty, we need to check if cd->disk is null in pcd_detect. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
zhengbin authored
In pcd_init_units, if blk_mq_init_sq_queue fails, need to set queue to NULL before put_disk, otherwise null-ptr-deref Read will occur. put_disk kobject_put disk_release blk_put_queue(disk->queue) Fixes: f0d17625 ("paride/pcd: Fix potential NULL pointer dereference and mem leak") Reported-by: -
zhengbin authored
In pf_init_units, if blk_mq_init_sq_queue fails, need to set queue to NULL before put_disk, otherwise null-ptr-deref Read will occur. put_disk kobject_put disk_release blk_put_queue(disk->queue) Fixes: 77218ddf ("paride: convert pf to blk-mq") Reported-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/song/mdJens Axboe authored
Pull MD fixes from Song. * 'md-next' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid5: use bio_end_sector to calculate last_sector md/raid1: fail run raid1 array when active disk less than one md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone
-
- 03 Sep, 2019 10 commits
-
-
Guoqing Jiang authored
Use the common way to get last_sector. Signed-off-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
Song Liu <songliubraving@fb.com>
-
Yufen Yu authored
When run test case: mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal mdadm -S /dev/md1 mdadm -A /dev/md1 /dev/sd[b-c] --run --force mdadm --zero /dev/sda mdadm /dev/md1 -a /dev/sda echo offline > /sys/block/sdc/device/state echo offline > /sys/block/sdb/device/state sleep 5 mdadm -S /dev/md1 echo running > /sys/block/sdb/device/state echo running > /sys/block/sdc/device/state mdadm -A /dev/md1 /dev/sd[a-c] --run --force mdadm run fail with kernel message as follow: [ 172.986064] md: kicking non-fresh sdb from array! [ 173.004210] md: kicking non-fresh sdc from array! [ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors [ 173.022406] md1: failed to create bitmap (-5) In fact, when active disk in raid1 array less than one, we need to return fail in raid1_run(). Reviewed-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
-
Guilherme G. Piccoli authored
Currently md raid0/linear are not provided with any mechanism to validate if an array member got removed or failed. The driver keeps sending BIOs regardless of the state of array members, and kernel shows state 'clean' in the 'array_state' sysfs attribute. This leads to the following situation: if a raid0/linear array member is removed and the array is mounted, some user writing to this array won't realize that errors are happening unless they check dmesg or perform one fsync per written file. Despite udev signaling the member device is gone, 'mdadm' cannot issue the STOP_ARRAY ioctl successfully, given the array is mounted. In other words, no -EIO is returned and writes (except direct ones) appear normal. Meaning the user might think the wrote data is correctly stored in the array, but instead garbage was written given that raid0 does stripping (and so, it requires all its members to be working in order to not corrupt data). For md/linear, writes to the available members will work fine, but if the writes go to the missing member(s), it'll cause a file corruption situation, whereas the portion of the writes to the missing devices aren't written effectively. This patch changes this behavior: we check if the block device's gendisk is UP when submitting the BIO to the array member, and if it isn't, we flag the md device as MD_BROKEN and fail subsequent I/Os to that device; a read request to the array requiring data from a valid member is still completed. While flagging the device as MD_BROKEN, we also show a rate-limited warning in the kernel log. A new array state 'broken' was added too: it mimics the state 'clean' in every aspect, being useful only to distinguish if the array has some member missing. We rely on the MD_BROKEN flag to put the array in the 'broken' state. This state cannot be written in 'array_state' as it just shows one or more members of the array are missing but acts like 'clean', it wouldn't make sense to write it. With this patch, the filesystem reacts much faster to the event of missing array member: after some I/O errors, ext4 for instance aborts the journal and prevents corruption. Without this change, we're able to keep writing in the disk and after a machine reboot, e2fsck shows some severe fs errors that demand fixing. This patch was tested in ext4 and xfs filesystems, and requires a 'mdadm' counterpart to handle the 'broken' state. Cc: Song Liu <songliubraving@fb.com> Reviewed-by:
Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by:
-
Kent Overstreet authored
The race was when a thread using closure_sync() notices cl->s->done == 1 before the thread calling closure_put() calls wake_up_process(). Then, it's possible for that thread to return and exit just before wake_up_process() is called - so we're trying to wake up a process that no longer exists. rcu_read_lock() is sufficient to protect against this, as there's an rcu barrier somewhere in the process teardown path. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Acked-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Dan Carpenter authored
The copy_to_user() function returns the number of bytes remaining to be copied, but the intention here was to return -EFAULT if the copy fails. Fixes: cafe5635 ("bcache: A block layer cache") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Shile Zhang authored
Read /sys/fs/bcache/<uuid>/cacheN/priority_stats can take very long time with huge cache after long run. Signed-off-by:
Shile Zhang <shile.zhang@linux.alibaba.com> Tested-by:
Heitor Alves de Siqueira <halves@canonical.com> Signed-off-by:
-
Marcos Paulo de Souza authored
This argument was not being considered since blk-mq was set by default, so removed this documentation to avoid confusion. Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> .txt file is now .rst Signed-off-by:
-
Marcos Paulo de Souza authored
This argument was ignored since blk-mq was set as default, so remove it from documentation. Reviewed-by:
-
Marcos Paulo de Souza authored
Since the inclusion of blk-mq, elevator argument was not being considered anymore, and it's utility died long with the legacy IO path, now removed too. Reviewed-by:
Bob Liu <bob.liu@oracle.com> Reviewed-by:
-
Damien Le Moal authored
Commit 7211aef8 ("block: mq-deadline: Fix write completion handling") added a call to blk_mq_sched_mark_restart_hctx() in dd_dispatch_request() to make sure that write request dispatching does not stall when all target zones are locked. This fix left a subtle race when a write completion happens during a dispatch execution on another CPU: CPU 0: Dispatch CPU1: write completion dd_dispatch_request() lock(&dd->lock); ... lock(&dd->zone_lock); dd_finish_request() rq = find request lock(&dd->zone_lock); unlock(&dd->zone_lock); zone write unlock unlock(&dd->zone_lock); ... __blk_mq_free_request check restart flag (not set) -> queue not run ... if (!rq && have writes) blk_mq_sched_mark_restart_hctx() unlock(&dd->lock) Since the dispatch context finishes after the write request completion handling, marking the queue as needing a restart is not seen from __blk_mq_free_request() and blk_mq_sched_restart() not executed leading to the dispatch stall under 100% write workloads. Fix this by moving the call to blk_mq_sched_mark_restart_hctx() from dd_dispatch_request() into dd_finish_request() under the zone lock to ensure full mutual exclusion between write request dispatch selection and zone unlock on write request completion. Fixes: 7211aef8 ("block: mq-deadline: Fix write completion handling") Cc: stable@vger.kernel.org Reported-by:
Hans Holmberg <Hans.Holmberg@wdc.com> Reviewed-by:
-
- 31 Aug, 2019 1 commit
-
-
Tejun Heo authored
page->mapping may encode different values in it and page_mapping() should always be used to access the mapping pointer. track_foreign_dirty tracepoint was incorrectly accessing page->mapping directly. Use page_mapping() instead. Also, add NULL checks while at it. Fixes: 3a8e9ac8 ("writeback: add tracepoints for cgroup foreign writebacks") Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 30 Aug, 2019 3 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe changes from Sagi: "The nvme updates include: - ana log parse fix from Anton - nvme quirks support for Apple devices from Ben - fix missing bio completion tracing for multipath stack devices from Hannes and Mikhail - IP TOS settings for nvme rdma and tcp transports from Israel - rq_dma_dir cleanups from Israel - tracing for Get LBA Status command from Minwoo - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself - Some consolidation between the fabrics transports for handling the CAP register - reset race with ns scanning fix for fabrics (move fabrics commands to a dedicated request queue with a different lifetime from the admin request queue)." * 'nvme-5.4' of git://git.infradead.org/nvme: (30 commits) nvme-rdma: Use rq_dma_dir macro nvme-fc: Use rq_dma_dir macro nvme-pci: Tidy up nvme_unmap_data nvme: make fabrics command run on a separate request queue nvme-pci: Support shared tags across queues for Apple 2018 controllers nvme-pci: Add support for Apple 2018+ models nvme-pci: Add support for variable IO SQ element size nvme-pci: Pass the queue to SQ_SIZE/CQ_SIZE macros nvme: trace bio completion nvme-multipath: fix ana log nsid lookup when nsid is not found nvmet-tcp: Add TOS for tcp transport nvme-tcp: Add TOS for tcp transport nvme-tcp: Use struct nvme_ctrl directly nvme-rdma: Add TOS for rdma transport nvme-fabrics: Add type of service (TOS) configuration nvmet-tcp: fix possible memory leak nvmet-tcp: fix possible NULL deref nvmet: trace: parse Get LBA Status command in detail nvme: trace: parse Get LBA Status command in detail nvme: trace: support for Get LBA Status opcode parsed ...
-
Tejun Heo authored
cgroup foreign inode handling has quite a bit of heuristics and internal states which sometimes makes it difficult to understand what's going on. Add tracepoints to improve visibility. Signed-off-by:
-
Tejun Heo authored
ioc_cpd_alloc() forgot to check NULL return from kzalloc(). Add it. Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
- 29 Aug, 2019 10 commits
-
-
Israel Rukshin authored
Remove code duplication. Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me>
-
Israel Rukshin authored
Remove code duplication. Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
-
Israel Rukshin authored
Remove pointless local variable and use rq_dma_dir macro. Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
-
Sagi Grimberg authored
We have a fundamental issue that fabric commands use the admin_q. The reason is, that admin-connect, register reads and writes and admin commands cannot be guaranteed ordering while we are running controller resets. For example, when we reset a controller we perform: 1. disable the controller 2. teardown the admin queue 3. re-establish the admin queue 4. enable the controller In order to perform (3), we need to unquiesce the admin queue, however we may have some admin commands that are already pending on the quiesced admin_q and will immediate execute when we unquiesce it before we execute (4). The host must not send admin commands to the controller before enabling the controller. To fix this, we have the fabric commands (admin connect and property get/set, but not I/O queue connect) use a separate fabrics_q and make sure to quiesce the admin_q before we disable the controller, and unquiesce it only after we enable the controller. This fixes the error prints from nvmet in a controller reset storm test: kernel: nvmet: got cmd 6 while CC.EN == 0 on qid = 0 Which indicate that the host is sending an admin command when the controller is not enabled. Reviewed-by:
-
Benjamin Herrenschmidt authored
Another issue with the Apple T2 based 2018 controllers seem to be that they blow up (and shut the machine down) if there's a tag collision between the IO queue and the Admin queue. My suspicion is that they use our tags for their internal tracking and don't mix them with the queue id. They also seem to not like when tags go beyond the IO queue depth, ie 128 tags. This adds a quirk that marks tags 0..31 of the IO queue reserved Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
-
Benjamin Herrenschmidt authored
Based on reverse engineering and original patch by Paul Pawlowski <paul@mrarm.io> This adds support for Apple weird implementation of NVME in their 2018 or later machines. It accounts for the twice-as-big SQ entries for the IO queues, and the fact that only interrupt vector 0 appears to function properly. Signed-off-by:
-
Benjamin Herrenschmidt authored
The size of a submission queue element should always be 6 (64 bytes) by spec. However some controllers such as Apple's are not properly implementing the standard and require a different size. This provides the ground work for the subsequent quirks for these controllers. Signed-off-by:
-
Benjamin Herrenschmidt authored
This will make it easier to handle variable queue entry sizes later. No functional change. Signed-off-by:
-
Hannes Reinecke authored
When native multipathing is enabled we cannot enable blktrace for the underlying paths, so any completion is never traced. Signed-off-by:
Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Reviewed-by:
-
Anton Eidelman authored
ANA log parsing invokes nvme_update_ana_state() per ANA group desc. This updates the state of namespaces with nsids in desc->nsids[]. Both ctrl->namespaces list and desc->nsids[] array are sorted by nsid. Hence nvme_update_ana_state() performs a single walk over ctrl->namespaces: - if current namespace matches the current desc->nsids[n], this namespace is updated, and n is incremented. - the process stops when it encounters the end of either ctrl->namespaces end or desc->nsids[] In case desc->nsids[n] does not match any of ctrl->namespaces, the remaining nsids following desc->nsids[n] will not be updated. Such situation was considered abnormal and generated WARN_ON_ONCE. However ANA log MAY contain nsids not (yet) found in ctrl->namespaces. For example, lets consider the following scenario: - nvme0 exposes namespaces with nsids = [2, 3] to the host - a new namespace nsid = 1 is added dynamically - also, a ANA topology change is triggered - NS_CHANGED aen is generated and triggers scan_work - before scan_work discovers nsid=1 and creates a namespace, a NOTICE_ANA aen was issues and ana_work receives ANA log with nsids=[1, 2, 3] Result: ana_work fails to update ANA state on existing namespaces [2, 3] Solution: Change the way nvme_update_ana_state() namespace list walk checks the current namespace against desc->nsids[n] as follows: a) ns->head->ns_id < desc->nsids[n]: keep walking ctrl->namespaces. b) ns->head->ns_id == desc->nsids[n]: match, update the namespace c) ns->head->ns_id >= desc->nsids[n]: skip to desc->nsids[n+1] This enables correct operation in the scenario described above. This also allows ANA log to contain nsids currently invisible to the host, i.e. inactive nsids. Signed-off-by:
Anton Eidelman <anton@lightbitslabs.com> Reviewed-by:
-
