- 03 Jul, 2019 3 commits
-
-
Arnaldo Carvalho de Melo authored
commit 5192bde7 upstream. The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: util/header.c: In function 'perf_event__synthesize_event_update_name': util/header.c:3625:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] strncpy(ev->data, evsel->name, len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ util/header.c:3618:15: note: length computed here size_t len = strlen(evsel->name); ^~~~~~~~~~~~~~~~~~~ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a6e52817 ("perf tools: Add event_update event unit type") Link: https://lkml.kernel.org/n/tip-wycz66iy8dl2z3yifgqf894p@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnaldo Carvalho de Melo authored
commit b6313899 upstream. Since we make sure the destination buffer has at least strlen(orig) + 1, no need to do a strncpy(dest, orig, strlen(orig)), just use strcpy(dest, orig). This silences this gcc 8.2 warning on Alpine Linux: In function 'add_man_viewer', inlined from 'perf_help_config' at builtin-help.c:284:3: builtin-help.c:192:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] strncpy((*p)->name, name, len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ builtin-help.c: In function 'perf_help_config': builtin-help.c:187:15: note: length computed here size_t len = strlen(name); ^~~~~~~~~~~~ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 07800601 ("perf_counter tools: add in basic glue from Git") Link: https://lkml.kernel.org/n/tip-2f69l7drca427ob4km8i7kvo@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit 4d0f16d0 upstream. The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. In this case we are actually setting the null byte at the right place, but since we pass the buffer size as the limit to strncpy() and not it minus one, gcc ends up warning us about that, see below. So, lets just switch to the shorter form provided by strlcpy(). This fixes this warning on an Alpine Linux Edge system with gcc 8.2: ui/tui/helpline.c: In function 'tui_helpline__push': ui/tui/helpline.c:27:2: error: 'strncpy' specified bound 512 equals destination size [-Werror=stringop-truncation] strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0'; ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: e6e90468 ("perf ui: Introduce struct ui_helpline") Link: https://lkml.kernel.org/n/tip-d1wz0hjjsh19xbalw69qpytj@git.kernel.orgSigned-off-by:
-
- 25 Jun, 2019 37 commits
-
-
Greg Kroah-Hartman authored
-
Michael Ellerman authored
commit ca72d883 upstream. When using the Hash Page Table (HPT) MMU, userspace memory mappings are managed at two levels. Firstly in the Linux page tables, much like other architectures, and secondly in the SLB (Segment Lookaside Buffer) and HPT. It's the SLB and HPT that are actually used by the hardware to do translations. As part of the series adding support for 4PB user virtual address space using the hash MMU, we added support for allocating multiple "context ids" per process, one for each 512TB chunk of address space. These are tracked in an array called extended_id in the mm_context_t of a process that has done a mapping above 512TB. If such a process forks (ie. clone(2) without CLONE_VM set) it's mm is copied, including the mm_context_t, and then init_new_context() is called to reinitialise parts of the mm_context_t as appropriate to separate the address spaces of the two processes. The key step in ensuring the two processes have separate address spaces is to allocate a new context id for the process, this is done at the beginning of hash__init_new_context(). If we didn't allocate a new context id then the two processes would share mappings as far as the SLB and HPT are concerned, even though their Linux page tables would be separate. For mappings above 512TB, which use the extended_id array, we neglected to allocate new context ids on fork, meaning the parent and child use the same ids and therefore share those mappings even though they're supposed to be separate. This can lead to the parent seeing writes done by the child, which is essentially memory corruption. There is an additional exposure which is that if the child process exits, all its context ids are freed, including the context ids that are still in use by the parent for mappings above 512TB. One or more of those ids can then be reallocated to a third process, that process can then read/write to the parent's mappings above 512TB. Additionally if the freed id is used for the third process's primary context id, then the parent is able to read/write to the third process's mappings *below* 512TB. All of these are fundamental failures to enforce separation between processes. The only mitigating factor is that the bug only occurs if a process creates mappings above 512TB, and most applications still do not create such mappings. Only machines using the hash page table MMU are affected, eg. PowerPC 970 (G5), PA6T, Power5/6/7/8/9. By default Power9 bare metal machines (powernv) use the Radix MMU and are not affected, unless the machine has been explicitly booted in HPT mode (using disable_radix on the kernel command line). KVM guests on Power9 may be affected if the host or guest is configured to use the HPT MMU. LPARs under PowerVM on Power9 are affected as they always use the HPT MMU. Kernels built with PAGE_SIZE=4K are not affected. The fix is relatively simple, we need to reallocate context ids for all extended mappings on fork. Fixes: f384796c ("powerpc/mm: Add support for handling > 512TB address in SLB miss") Cc: stable@vger.kernel.org # v4.17+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
James Morse authored
commit 87d3aa28 upstream. When a new control group is created __init_one_rdt_domain() walks all the other closids to calculate the sets of used and unused bits. If it discovers a pseudo_locksetup group, it breaks out of the loop. This means any later closid doesn't get its used bits added to used_b. These bits will then get set in unused_b, and added to the new control group's configuration, even if they were marked as exclusive for a later closid. When encountering a pseudo_locksetup group, we should continue. This is because "a resource group enters 'pseudo-locked' mode after the schemata is written while the resource group is in 'pseudo-locksetup' mode." When we find a pseudo_locksetup group, its configuration is expected to be overwritten, we can skip it. Fixes: dfe9674b ("x86/intel_rdt: Enable entering of pseudo-locksetup mode") Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Reinette Chatre <reinette.chatre@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H Peter Avin <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20190603172531.178830-1-james.morse@arm.com [Dropped comment due to lack of space] Signed-off-by:
-
Jouni Malinen authored
commit a71fd9da upstream. ieee80211_aes_gmac() uses the mic argument directly in sg_set_buf() and that does not allow use of stack memory (e.g., BUG_ON() is hit in sg_set_buf() with CONFIG_DEBUG_SG). BIP GMAC TX side is fine for this since it can use the skb data buffer, but the RX side was using a stack variable for deriving the local MIC value to compare against the received one. Fix this by allocating heap memory for the mic buffer. This was found with hwsim test case ap_cipher_bip_gmac_128 hitting that BUG_ON() and kernel panic. Cc: stable@vger.kernel.org Signed-off-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Andy Strohman authored
commit f77bf486 upstream. When dumping stations, memory allocated for station_info's pertid member will leak if the nl80211 header cannot be added to the sk_buff due to insufficient tail room. I noticed this leak in the kmalloc-2048 cache. Cc: stable@vger.kernel.org Fixes: 8689c051 ("cfg80211: dynamically allocate per-tid stats for station info") Signed-off-by:
Andy Strohman <andy@uplevelsystems.com> Signed-off-by:
-
Yu Wang authored
commit 79c92ca4 upstream. When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled. Without this change, a TDLS issue can be reproduced by following the steps as below: 1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2. 2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link. 3. Repeat step #2 and monitor the connection between STA and AP. During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which means: Class 2/3 frame received from nonassociated STA. On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP. Cc: stable@vger.kernel.org Signed-off-by:
Yu Wang <yyuwang@codeaurora.org> Signed-off-by:
-
Manikanta Pubbisetty authored
commit 33d915d9 upstream. As per the current design, in the case of sw crypto controlled devices, it is the device which advertises the support for AP/VLAN iftype based on it's ability to tranmsit packets encrypted in software (In VLAN functionality, group traffic generated for a specific VLAN group is always encrypted in software). Commit db3bdcb9 ("mac80211: allow AP_VLAN operation on crypto controlled devices") has introduced this change. Since 4addr AP operation also uses AP/VLAN iftype, this conditional way of advertising AP/VLAN support has broken 4addr AP mode operation on crypto controlled devices which do not support VLAN functionality. In the case of ath10k driver, not all firmwares have support for VLAN functionality but all can support 4addr AP operation. Because AP/VLAN support is not advertised for these devices, 4addr AP operations are also blocked. Fix this by allowing 4addr operation on devices which do not support AP/VLAN iftype but can support 4addr AP operation (decision is based on the wiphy flag WIPHY_FLAG_4ADDR_AP). Cc: stable@vger.kernel.org Fixes: db3bdcb9 ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by:
Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by:
-
Johannes Berg authored
commit 588f7d39 upstream. When receiving a robust management frame, drop it if we don't have rx->sta since then we don't have a security association and thus couldn't possibly validate the frame. Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
commit 4f488fbc upstream. In wiphy_new_nm(), if an error occurs after dev_set_name() and device_initialize() have already been called, it's necessary to call put_device() (via wiphy_free()) to avoid a memory leak. Reported-by: syzbot+7fddca22578bc67c3fe4@syzkaller.appspotmail.com Fixes: 1f87f7d3 ("cfg80211: add rfkill support") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Steve French authored
commit 8d526d62 upstream. Some servers such as Windows 10 will return STATUS_INSUFFICIENT_RESOURCES as the number of simultaneous SMB3 requests grows (even though the client has sufficient credits). Return EAGAIN on STATUS_INSUFFICIENT_RESOURCES so that we can retry writes which fail with this status code. This (for example) fixes large file copies to Windows 10 on fast networks. Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Marcel Holtmann authored
commit 693cd8ce upstream. When trying to align the minimum encryption key size requirement for Bluetooth connections, it turns out doing this in a central location in the HCI connection handling code is not possible. Original Bluetooth version up to 2.0 used a security model where the L2CAP service would enforce authentication and encryption. Starting with Bluetooth 2.1 and Secure Simple Pairing that model has changed into that the connection initiator is responsible for providing an encrypted ACL link before any L2CAP communication can happen. Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and before devices are causing a regression. The encryption key size check needs to be moved out of the HCI connection handling into the L2CAP channel setup. To achieve this, the current check inside hci_conn_security() has been moved into l2cap_check_enc_key_size() helper function and then called from four decisions point inside L2CAP to cover all combinations of Secure Simple Pairing enabled devices and device using legacy pairing and legacy service security model. Fixes: d5bb334a ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Marcel Holtmann authored
commit d5bb334a upstream. The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Gao Xiang authored
commit 5efe5137 upstream. There are some backward incompatible features pending for months, mainly due to on-disk format expensions. However, we should ensure that it cannot be mounted with old kernels. Otherwise, it will causes unexpected behaviors. Fixes: ba2b77a8 ("staging: erofs: add super block operations") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Thomas Hellstrom authored
commit cc0ba0d8 upstream. The HB port may not be available for various reasons. Either it has been disabled by a config option or by the hypervisor for other reasons. In that case, make sure we have a backup plan and use the backdoor port instead with a performance penalty. Cc: stable@vger.kernel.org Fixes: 89da76fd ("drm/vmwgfx: Add VMWare host messaging capability") Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Signed-off-by:
-
Anisse Astier authored
commit adeaa21a upstream. Fix ssbd.c which depends implicitly on asm/ptrace.h including linux/prctl.h (through for example linux/compat.h, then linux/time.h, linux/seqlock.h, linux/spinlock.h and linux/irqflags.h), and uses PR_SPEC* defines. This is an issue since we'll soon be removing the include from asm/ptrace.h. Fixes: 9cdc0108 ("arm64: ssbd: Add prctl interface for per-thread mitigation") Cc: stable@vger.kernel.org Signed-off-by:
Anisse Astier <aastier@freebox.fr> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Anisse Astier authored
commit 35341ca0 upstream. Pulling linux/prctl.h into asm/ptrace.h in the arm64 UAPI headers causes userspace build issues for any program (e.g. strace and qemu) that includes both <sys/prctl.h> and <linux/ptrace.h> when using musl libc: | error: redefinition of 'struct prctl_mm_map' | struct prctl_mm_map { See https://github.com/foundriesio/meta-lmp/commit/6d4a106e191b5d79c41b9ac78fd321316d3013c0 for a public example of people working around this issue. Although it's a bit grotty, fix this breakage by duplicating the prctl constant definitions. Since these are part of the kernel ABI, they cannot be changed in future and so it's not the end of the world to have them open-coded. Fixes: 43d4da2c ("arm64/sve: ptrace and ELF coredump support") Cc: stable@vger.kernel.org Acked-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
-
Faiz Abbas authored
commit 88a74841 upstream. If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Since am571x-, am572x- and am574x-idk don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). Cc: <stable@vger.kernel.org> Signed-off-by:
Faiz Abbas <faiz_abbas@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Faiz Abbas authored
commit c3c0b70c upstream. Update the MMC2_HS200_MANUAL1 iodelay values to match with the latest dra76x data manual[1]. The new iodelay values will have better marginality and should prevent issues in corner cases. Also this particular pinctrl-array is using spaces instead of tabs for spacing between the values and the comments. Fix this as well. [1] http://www.ti.com/lit/ds/symlink/dra76p.pdf Cc: <stable@vger.kernel.org> Signed-off-by:
-
Fabio Estevam authored
commit b25af2ff upstream. Since commit 1e434b70 ("ARM: imx: update the cpu power up timing setting on i.mx6sx") some characters loss is noticed on i.MX6ULL UART as reported by Christoph Niedermaier. The intention of such commit was to increase the SW2ISO field for i.MX6SX only, but since cpuidle-imx6sx is also used on i.MX6UL/i.MX6ULL this caused unintended side effects on other SoCs. Fix this problem by keeping the original SW2ISO value for i.MX6UL/i.MX6ULL and only increase SW2ISO in the i.MX6SX case. Cc: stable@vger.kernel.org Fixes: 1e434b70 ("ARM: imx: update the cpu power up timing setting on i.mx6sx") Reported-by:
Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Tested-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Tested-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Naveen N. Rao authored
commit 758f2046 upstream. BPF_ALU64 div/mod operations are currently using signed division, unlike BPF_ALU32 operations. Fix the same. DIV64 and MOD64 overflow tests pass with this fix. Fixes: 156d0e29 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
ShihPo Hung authored
commit bf587caa upstream. Because RISC-V compliant implementations can cache invalid entries in TLB, an SFENCE.VMA is necessary after changes to the page table. This patch adds an SFENCE.vma for the vmalloc_fault path. Signed-off-by:
ShihPo Hung <shihpo.hung@sifive.com> [paul.walmsley@sifive.com: reversed tab->whitespace conversion, wrapped comment lines] Signed-off-by:
Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: linux-riscv@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by:
-
Willem de Bruijn authored
commit fd704bd5 upstream. CAN supports software tx timestamps as of the below commit. Purge any queued timestamp packets on socket destroy. Fixes: 51f31cab ("ip: support for TX timestamps on UDP and RAW sockets") Reported-by: syzbot+a90604060cb40f5bdd16@syzkaller.appspotmail.com Signed-off-by:
Willem de Bruijn <willemb@google.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Joakim Zhang authored
commit 247e5356 upstream. Current we can meet timeout issue when setting a small bitrate like 10000 as follows on i.MX6UL EVK board (ipg clock = 66MHZ, per clock = 30MHZ): | root@imx6ul7d:~# ip link set can0 up type can bitrate 10000 A link change request failed with some changes committed already. Interface can0 may have been left with an inconsistent configuration, please check. | RTNETLINK answers: Connection timed out It is caused by calling of flexcan_chip_unfreeze() timeout. Originally the code is using usleep_range(10, 20) for unfreeze operation, but the patch (8badd65e can: flexcan: avoid calling usleep_range from interrupt context) changed it into udelay(10) which is only a half delay of before, there're also some other delay changes. After double to FLEXCAN_TIMEOUT_US to 100 can fix the issue. Meanwhile, Rasmus Villemoes reported that even with a timeout of 100, flexcan_probe() fails on the MPC8309, which requires a value of at least 140 to work reliably. 250 works for everyone. Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by:
Dong Aisheng <aisheng.dong@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Anssi Hannula authored
commit 904044dd upstream. Commit 9e5f1b27 ("can: xilinx_can: add support for Xilinx CAN FD core") added a new can_bittiming_const structure for CAN FD cores that support larger values for tseg1, tseg2, and sjw than previous Xilinx CAN cores, but the commit did not actually take that into use. Fix that. Tested with CAN FD core on a ZynqMP board. Fixes: 9e5f1b27 ("can: xilinx_can: add support for Xilinx CAN FD core") Reported-by:
Shubhrajyoti Datta <shubhrajyoti.datta@gmail.com> Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by:
-
Naohiro Aota authored
commit c4e0540d upstream. Currently, btrfs does not consult seed devices to start readahead. As a result, if readahead zone is added to the seed devices, btrfs_reada_wait() indefinitely wait for the reada_ctl to finish. You can reproduce the hung by modifying btrfs/163 to have larger initial file size (e.g. xfs_io pwrite 4M instead of current 256K). Fixes: 7414a03f ("btrfs: initial readahead code and prototypes") Cc: stable@vger.kernel.org # 3.2+: ce7791ff: Btrfs: fix race between readahead and device replace/removal Cc: stable@vger.kernel.org # 3.2+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Jaesoo Lee authored
[ Upstream commit c8e8c77b ] The Number of Namespaces (nn) field in the identify controller data structure is defined as u32 and the maximum allowed value in NVMe specification is 0xFFFFFFFEUL. This change fixes the possible overflow of the DIV_ROUND_UP() operation used in nvme_scan_ns_list() by casting the nn to u64. Signed-off-by:
Jaesoo Lee <jalee@purestorage.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dave Martin authored
[ Upstream commit ebcc5928 ] Since GCC 9, the compiler warns about evolution of the platform-specific ABI, in particular relating for the marshaling of certain structures involving bitfields. The kernel is a standalone binary, and of course nobody would be so stupid as to expose structs containing bitfields as function arguments in ABI. (Passing a pointer to such a struct, however inadvisable, should be unaffected by this change. perf and various drivers rely on that.) So these warnings do more harm than good: turn them off. We may miss warnings about future ABI drift, but that's too bad. Future ABI breaks of this class will have to be debugged and fixed the traditional way unless the compiler evolves finer-grained diagnostics. Signed-off-by:
-
Robert Hancock authored
[ Upstream commit 4a60570d ] Some chips have attributes which exist on more than one page but the attribute is not presently marked as paged. This causes the attributes to be generated with the same label, which makes it impossible for userspace to tell them apart. Marking all such attributes as paged would result in the page suffix being added regardless of whether they were present on more than one page or not, which might break existing setups. Therefore, we add a second check which treats the attribute as paged, even if not marked as such, if it is present on multiple pages. Fixes: b4ce237b ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") Signed-off-by:
Robert Hancock <hancock@sedsystems.ca> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Eduardo Valentin authored
[ Upstream commit c41dd48e ] Drivers may register to hwmon and request for also registering with the thermal subsystem (HWMON_C_REGISTER_TZ). However, some of these driver, e.g. marvell phy, may be probed from Device Tree or being dynamically allocated, and in the later case, it will not have a dev->of_node entry. Registering with hwmon without the dev->of_node may result in different outcomes depending on the device tree, which may be a bit misleading. If the device tree blob has no 'thermal-zones' node, the *hwmon_device_register*() family functions are going to gracefully succeed, because of-thermal, *thermal_zone_of_sensor_register() return -ENODEV in this case, and the hwmon error path handles this error code as success to cover for the case where CONFIG_THERMAL_OF is not set. However, if the device tree blob has the 'thermal-zones' entry, the *hwmon_device_register*() will always fail on callers with no dev->of_node, propagating -EINVAL. If dev->of_node is not present, calling of-thermal does not make sense. For this reason, this patch checks first if the device has a of_node before going over the process of registering with the thermal subsystem of-thermal interface. And in this case, when a caller of *hwmon_device_register*() with HWMON_C_REGISTER_TZ and no dev->of_node will still register with hwmon, but not with the thermal subsystem. If all the hwmon part bits are in place, the registration will succeed. Fixes: d560168b ("hwmon: (core) New hwmon registration API") Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Eduardo Valentin <eduval@amazon.com> Signed-off-by:
-
Alexandra Winter authored
[ Upstream commit 33572619 ] Enabling sysfs attribute bridge_hostnotify triggers a series of udev events for the MAC addresses of all currently connected peers. In case no VLAN is set for a peer, the device reports the corresponding MAC addresses with VLAN ID 4096. This currently results in attribute VLAN=4096 for all non-VLAN interfaces in the initial series of events after host-notify is enabled. Instead, no VLAN attribute should be reported in the udev event for non-VLAN interfaces. Only the initial events face this issue. For dynamic changes that are reported later, the device uses a validity flag. This also changes the code so that it now sets the VLAN attribute for MAC addresses with VID 0. On Linux, no qeth interface will ever be registered with VID 0: Linux kernel registers VID 0 on all network interfaces initially, but qeth will drop .ndo_vlan_rx_add_vid for VID 0. Peers with other OSs could register MACs with VID 0. Fixes: 9f48b9db ("qeth: bridgeport support - address notifications") Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Miaohe Lin authored
[ Upstream commit ceae266b ] There's some NICs, such as hinic, with NETIF_F_IP_CSUM and NETIF_F_TSO on but NETIF_F_HW_CSUM off. And ipvlan device features will be NETIF_F_TSO on with NETIF_F_IP_CSUM and NETIF_F_IP_CSUM both off as IPVLAN_FEATURES only care about NETIF_F_HW_CSUM. So TSO will be disabled in netdev_fix_features. For example: Features for enp129s0f0: rx-checksumming: on tx-checksumming: on tx-checksum-ipv4: on tx-checksum-ip-generic: off [fixed] tx-checksum-ipv6: on Fixes: a188222b ("net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit cc8f5260 ] We need to drop the "ctrl_info->sync_request_sem" lock before returning. Fixes: 6c223761 ("smartpqi: initial commit of Microsemi smartpqi driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Avri Altman authored
[ Upstream commit 1c90836f ] struct ufs_dev_cmd is the main container that supports device management commands. In the case of a read descriptor request, we assume that the proper space was allocated in dev_cmd to hold the returning descriptor. This is no longer true, as there are flows that doesn't use dev_cmd for device management requests, and was wrong in the first place. Fixes: d44a5f98 (ufs: query descriptor API) Signed-off-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Acked-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
George G. Davis authored
[ Upstream commit 4f45d62a ] The following error occurs for the `make ARCH=arm64 checkstack` case: aarch64-linux-gnu-objdump -d vmlinux $(find . -name '*.ko') | \ perl ./scripts/checkstack.pl arm64 wrong or unknown architecture "arm64" As suggested by Masahiro Yamada, fix the above error using regular expressions in the same way it was fixed for the `ARCH=x86` case via commit fda9f990 ("scripts/checkstack.pl: automatically handle 32-bit and 64-bit mode for ARCH=x86"). Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
George G. Davis <george_davis@mentor.com> Signed-off-by:
-
Minwoo Im authored
[ Upstream commit 3562f5d9 ] The WRITE ZEROES command has no data transfer so that we need to initialize the struct (nvmet_req *req)->data_len to 0x0. While (nvmet_req *req)->transfer_len is initialized in nvmet_req_init(), data_len will be initialized by nowhere which might cause the failure with status code NVME_SC_SGL_INVALID_DATA | NVME_SC_DNR randomly. It's because nvmet_req_execute() checks like: if (unlikely(req->data_len != req->transfer_len)) { req->error_loc = offsetof(struct nvme_common_command, dptr); nvmet_req_complete(req, NVME_SC_SGL_INVALID_DATA | NVME_SC_DNR); } else req->execute(req); This patch fixes req->data_len not to be a randomly assigned by initializing it to 0x0 when preparing the command in nvmet_bdev_parse_io_cmd(). nvmet_file_parse_io_cmd() which is for file-backed I/O has already initialized the data_len field to 0x0, though. Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> Signed-off-by:
Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
-
Robin Murphy authored
[ Upstream commit 1c810739 ] On the Arm Juno platform, the HDLCD pixel clock is constrained to 250KHz resolution in order to avoid the tiny System Control Processor spending aeons trying to calculate exact PLL coefficients. This means that modes like my oddball 1600x1200 with 130.89MHz clock get rejected since the rate cannot be matched exactly. In practice, though, this mode works quite happily with the clock at 131MHz, so let's relax the check to allow a little bit of slop. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Robin Murphy authored
[ Upstream commit b96151ed ] Rather than allowing any old mode through, then subsequently refusing unmatchable clock rates in atomic_check when it's too late to back out and pick a different mode, let's do that validation up-front where it will cause unsupported modes to be correctly pruned in the first place. This also eliminates an issue whereby a perceived clock rate of 0 would cause atomic disable to fail and prevent the module from being unloaded. Signed-off-by:
-
