Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...

Pull HID updates from Jiri Kosina:
 "It contains HID driver updates all over the place -- a lot of new
  hardware support especially in the multitouch area, including generic
  handling of all multitouch devices by the hid-multitiouch driver
  automatically."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (42 commits)
  HID: multitouch: add PID for Fructel product
  HID: wacom: Add reporting of wheel for Intuos4 WL
  HID: wacom: Replace __set_bit with input_set_capability
  HID: tivo: add support for BT-version (0x1200)
  HID: wacom: Reset stylus buttons - Intuos4 WL
  HID: multitouch: detect serial protocol
  HID: handle all multitouch devices through hid-multitouch
  HID: multitouch: fix handling of buggy reports descriptors for Dell ST2220T
  HID: make it possible to force hid-core claim the device
  HID: multitouch: add support for eGalax 0x722a
  HID: usbhid: add quirk no_get for quanta 3008 devices
  HID: multitouch: add more eGalax devices
  HID: multitouch: add new PID from Ideacom
  HID: multitouch: add support for Atmel maXTouch 03eb:2118
  HID: waltop: Add support for tablet with PID 0038
  HID: waltop: Replace original rdescs with links
  HID: uclogic: Replace original rdescs with links
  HID: wacom: Add pad buttons reporting on Intuos4 WL
  HID: wacom: report distance for Intuos4 WL
  HID: kye: Add support for 3 tablets
  ...

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

Pull workqueue changes from Tejun Heo:
 "This contains only one commit which cleans up UP allocation path a
  bit."

* 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: use percpu allocator for cwq on UP

Pull cgroup changes from Tejun Heo:
 "Out of the 8 commits, one fixes a long-standing locking issue around
  tasklist walking and others are cleanups."

* 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Walk task list under tasklist_lock in cgroup_enable_task_cg_list
  cgroup: Remove wrong comment on cgroup_enable_task_cg_list()
  cgroup: remove cgroup_subsys argument from callbacks
  cgroup: remove extra calls to find_existing_css_set
  cgroup: replace tasklist_lock with rcu_read_lock
  cgroup: simplify double-check locking in cgroup_attach_proc
  cgroup: move struct cgroup_pidlist out from the header file
  cgroup: remove cgroup_attach_task_current_cg()

Minor cleanup. de_thread()->setmax_mm_hiwater_rss() looks a bit
strange, move it into exec_mmap() which plays with old_mm.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exit_notify() changes ->exit_signal if the parent already did exec.
This doesn't really work, we are not going to send the signal now
if there is another live thread or the exiting task is traced. The
parent can exec before the last dies or the tracer detaches.

Move this check into do_notify_parent() which actually sends the
signal.

The user-visible change is that we do not change ->exit_signal,
and thus the exiting task is still "clone children" for
do_wait()->eligible_child(__WCLONE). Hopefully this is fine, the
current logic is racy anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exit_notify() checks "tsk->self_exec_id != tsk->parent_exec_id"
to handle the "we have changed execution domain" case.

We can change do_thread() to always set ->exit_signal = SIGCHLD
and remove this check to simplify the code.

We could change setup_new_exec() instead, this looks more logical
because it increments ->self_exec_id. But note that de_thread()
already resets ->exit_signal if it changes the leader, let's keep
both changes close to each other.

Note that we change ->exit_signal lockless, this changes the rules.
Thereafter ->exit_signal is not stable under tasklist but this is
fine, the only possible change is OLDSIG -> SIGCHLD. This can race
with eligible_child() but the race is harmless. We can race with
reparent_leader() which changes our ->exit_signal in parallel, but
it does the same change to SIGCHLD.

The noticeable user-visible change is that the execing task is not
"visible" to do_wait()->eligible_child(__WCLONE) right after exec.
To me this looks more logical, and this is consistent with mt case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The child must not control its ->exit_signal, it is the parent who
decides which signal the child should use for notification.

This means that CLONE_PARENT should not use "clone_flags & CSIGNAL",
the forking task is the sibling of the new process and their parent
doesn't control exit_signal in this case.

This patch uses ->exit_signal of the forking process, but perhaps
we should simply use SIGCHLD.

We read group_leader->exit_signal lockless, this can race with the
ORIGINAL_SIGNAL -> SIGCHLD transition, but this is fine.

Potentially this change allows to kill self_exec_id/parent_exec_id.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While testing L2TP functionality, I came across a bug in getsockname().  The
IP address returned within the pppol2tp_addr's addr memember was not being
set to the IP  address in use.  This bug is caused by using inet_sk() on the
wrong socket (the L2TP socket rather than the underlying UDP socket), and was
likely introduced during the addition of L2TPv3 support.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

no socket layer outputs a message for this error and neither should rds.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull USB merge for 3.4-rc1 from Greg KH:
 "Here's the big USB merge for the 3.4-rc1 merge window.

  Lots of gadget driver reworks here, driver updates, xhci changes, some
  new drivers added, usb-serial core reworking to fix some bugs, and
  other various minor things.

  There are some patches touching arch code, but they have all been
  acked by the various arch maintainers."

* tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits)
  net: qmi_wwan: add support for ZTE MF820D
  USB: option: add ZTE MF820D
  usb: gadget: f_fs: Remove lock is held before freeing checks
  USB: option: make interface blacklist work again
  usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver
  USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls
  USB: use generic platform driver on ath79
  USB: EHCI: Add a generic platform device driver
  USB: OHCI: Add a generic platform device driver
  USB: ftdi_sio: new PID: LUMEL PD12
  USB: ftdi_sio: add support for FT-X series devices
  USB: serial: mos7840: Fixed MCS7820 device attach problem
  usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.
  usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH
  USB: ohci-nxp: Remove i2c_write(), use smbus
  USB: ohci-nxp: Support for LPC32xx
  USB: ohci-nxp: Rename symbols from pnx4008 to nxp
  USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp
  usb: gadget: Kconfig: fix typo for 'different'
  usb: dwc3: pci: fix another failure path in dwc3_pci_probe()
  ...

Pull TTY/serial patches from Greg KH:
 "tty and serial merge for 3.4-rc1

  Here's the big serial and tty merge for the 3.4-rc1 tree.

  There's loads of fixes and reworks in here from Jiri for the tty
  layer, and a number of patches from Alan to help try to wrestle the vt
  layer into a sane model.

  Other than that, lots of driver updates and fixes, and other minor
  stuff, all detailed in the shortlog."

* tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits)
  serial: pxa: add clk_prepare/clk_unprepare calls
  TTY: Wrong unicode value copied in con_set_unimap()
  serial: PL011: clear pending interrupts
  serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset.
  vt: NULL dereference in vt_do_kdsk_ioctl()
  tty: serial: vt8500: fix annotations for probe/remove
  serial: remove back and forth conversions in serial_out_sync
  serial: use serial_port_in/out vs serial_in/out in 8250
  serial: introduce generic port in/out helpers
  serial: reduce number of indirections in 8250 code
  serial: delete useless void casts in 8250.c
  serial: make 8250's serial_in shareable to other drivers.
  serial: delete last unused traces of pausing I/O in 8250
  pch_uart: Add module parameter descriptions
  pch_uart: Use existing default_baud in setup_console
  pch_uart: Add user_uartclk parameter
  pch_uart: Add Fish River Island II uart clock quirks
  pch_uart: Use uartclk instead of base_baud
  mpc5200b/uart: select more tolerant uart prescaler on low baudrates
  tty: moxa: fix bit test in moxa_start()
  ...

Pull big staging driver updates from Greg KH:
 "Here is the big drivers/staging/ merge for 3.4-rc1

  Lots of new driver updates here, with the addition of a few new ones,
  and only one moving out of the staging tree to the "real" part of the
  kernel (the hyperv scsi driver, acked by the scsi maintainer).

  There are also loads of cleanups, fixes, and other minor things in
  here, all self-contained in the drivers/staging/ tree.

  Overall we reversed the recent trend by adding more lines than we
  removed:
   379 files changed, 37952 insertions(+), 14153 deletions(-)"

* tag 'staging-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (360 commits)
  staging/zmem: Use lockdep_assert_held instead of spin_is_locked
  Staging: rtl8187se: r8180_wx.c: Cleaned up comments
  Staging: rtl8187se: r8180_wx.c: Removed old comments
  Staging: rtl8187se: r8180_dm.c: Removed old comments
  Staging: android: ram_console.c:
  Staging: rtl8187se: r8180_dm.c: Fix comments
  Staging: rtl8187se: r8180_dm.c: Fix spacing issues
  Staging: rtl8187se: r8180_dm.c Fixed indentation issues
  Staging: rtl8187se: r8180_dm.c: Fix brackets
  Staging: rtl8187se: r8180_dm.c: Removed spaces before tab stop
  staging: vme: fix section mismatches in linux-next 20120314
  Staging: rtl8187se: r8180_core.c: Fix some long line issues
  Staging: rtl8187se: r8180_core.c: Fix some spacing issues
  Staging: rtl8187se: r8180_core.c: Removed trailing spaces
  staging: mei: remove driver internal versioning
  Staging: rtl8187se: r8180_core.c: Cleaned up if statement
  staging: ozwpan depends on NET
  staging: ozwpan: added maintainer for ozwpan driver
  staging/mei: propagate error codes up in the write flow
  drivers:staging:mei Fix some typos in staging/mei
  ...

Pull driver core patches for 3.4-rc1 from Greg KH:
 "Here's the big driver core merge for 3.4-rc1.

  Lots of various things here, sysfs fixes/tweaks (with the nlink
  breakage reverted), dynamic debugging updates, w1 drivers, hyperv
  driver updates, and a variety of other bits and pieces, full
  information in the shortlog."

* tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits)
  Tools: hv: Support enumeration from all the pools
  Tools: hv: Fully support the new KVP verbs in the user level daemon
  Drivers: hv: Support the newly introduced KVP messages in the driver
  Drivers: hv: Add new message types to enhance KVP
  regulator: Support driver probe deferral
  Revert "sysfs: Kill nlink counting."
  uevent: send events in correct order according to seqnum (v3)
  driver core: minor comment formatting cleanups
  driver core: move the deferred probe pointer into the private area
  drivercore: Add driver probe deferral mechanism
  DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers
  w1_bq27000: Only one thread can access the bq27000 at a time.
  w1_bq27000 - remove w1_bq27000_write
  w1_bq27000: remove unnecessary NULL test.
  sysfs: Fix memory leak in sysfs_sd_setsecdata().
  intel_idle: Revert change of auto_demotion_disable_flags for Nehalem
  w1: Fix w1_bq27000
  driver-core: documentation: fix up Greg's email address
  powernow-k6: Really enable auto-loading
  powernow-k7: Fix CPU family number
  ...

Pull char and misc patches for 3.4-rc1 from Greg KH:
 "Not much here, just a few minor fixes and some conversions to the
  module_*_driver() functions, making the codebase smaller."

* tag 'char-misc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: bmp085: Use unsigned long to store jiffies
  char/ramoops: included linux/err.h twice
  misc: bmp085: Handle jiffies overflow correctly
  misc: fsa9480: Remove obsolete cleanup for clientdata
  char: Fix typo in tlclk.c
  char: Fix typo in viotape.c
  cs5535-mfgpt: don't call __init function from __devinit
  MISC: convert drivers/misc/* to use module_spi_driver()
  MISC: convert drivers/misc/* to use module_i2c_driver()
  MISC: convert drivers/misc/* to use module_platform_driver()

We should be testing "if (vnode->flags & (1 << 4))" instead of
"if (vnode->flags & 4) {".  The current test checks if the data was
modified instead of deleted.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull timer changes for v3.4 from Ingo Molnar

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  ntp: Fix integer overflow when setting time
  math: Introduce div64_long
  cs5535-clockevt: Allow the MFGPT IRQ to be shared
  cs5535-clockevt: Don't ignore MFGPT on SMP-capable kernels
  x86/time: Eliminate unused irq0_irqs counter
  clocksource: scx200_hrt: Fix the build
  x86/tsc: Reduce the TSC sync check time for core-siblings
  timer: Fix bad idle check on irq entry
  nohz: Remove ts->Einidle checks before restarting the tick
  nohz: Remove update_ts_time_stat from tick_nohz_start_idle
  clockevents: Leave the broadcast device in shutdown mode when not needed
  clocksource: Load the ACPI PM clocksource asynchronously
  clocksource: scx200_hrt: Convert scx200 to use clocksource_register_hz
  clocksource: Get rid of clocksource_calc_mult_shift()
  clocksource: dbx500: convert to clocksource_register_hz()
  clocksource: scx200_hrt:  use pr_<level> instead of printk
  time: Move common updates to a function
  time: Reorder so the hot data is together
  time: Remove most of xtime_lock usage in timekeeping.c
  ntp: Add ntp_lock to replace xtime_locking
  ...

Pull scheduler changes for v3.4 from Ingo Molnar

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  printk: Make it compile with !CONFIG_PRINTK
  sched/x86: Fix overflow in cyc2ns_offset
  sched: Fix nohz load accounting -- again!
  sched: Update yield() docs
  printk/sched: Introduce special printk_sched() for those awkward moments
  sched/nohz: Correctly initialize 'next_balance' in 'nohz' idle balancer
  sched: Cleanup cpu_active madness
  sched: Fix load-balance wreckage
  sched: Clean up parameter passing of proc_sched_autogroup_set_nice()
  sched: Ditch per cgroup task lists for load-balancing
  sched: Rename load-balancing fields
  sched: Move load-balancing arguments into helper struct
  sched/rt: Do not submit new work when PI-blocked
  sched/rt: Prevent idle task boosting
  sched/wait: Add __wake_up_all_locked() API
  sched/rt: Document scheduler related skip-resched-check sites
  sched/rt: Use schedule_preempt_disabled()
  sched/rt: Add schedule_preempt_disabled()
  sched/rt: Do not throttle when PI boosting
  sched/rt: Keep period timer ticking when rt throttling is active
  ...

Pull perf events changes for v3.4 from Ingo Molnar:

 - New "hardware based branch profiling" feature both on the kernel and
   the tooling side, on CPUs that support it.  (modern x86 Intel CPUs
   with the 'LBR' hardware feature currently.)

   This new feature is basically a sophisticated 'magnifying glass' for
   branch execution - something that is pretty difficult to extract from
   regular, function histogram centric profiles.

   The simplest mode is activated via 'perf record -b', and the result
   looks like this in perf report:

	$ perf record -b any_call,u -e cycles:u branchy

	$ perf report -b --sort=symbol
	    52.34%  [.] main                   [.] f1
	    24.04%  [.] f1                     [.] f3
	    23.60%  [.] f1                     [.] f2
	     0.01%  [k] _IO_new_file_xsputn    [k] _IO_file_overflow
	     0.01%  [k] _IO_vfprintf_internal  [k] _IO_new_file_xsputn
	     0.01%  [k] _IO_vfprintf_internal  [k] strchrnul
	     0.01%  [k] __printf               [k] _IO_vfprintf_internal
	     0.01%  [k] main                   [k] __printf

   This output shows from/to branch columns and shows the highest
   percentage (from,to) jump combinations - i.e.  the most likely taken
   branches in the system.  "branches" can also include function calls
   and any other synchronous and asynchronous transitions of the
   instruction pointer that are not 'next instruction' - such as system
   calls, traps, interrupts, etc.

   This feature comes with (hopefully intuitive) flat ascii and TUI
   support in perf report.

 - Various 'perf annotate' visual improvements for us assembly junkies.
   It will now recognize function calls in the TUI and by hitting enter
   you can follow the call (recursively) and back, amongst other
   improvements.

 - Multiple threads/processes recording support in perf record, perf
   stat, perf top - which is activated via a comma-list of PIDs:

	perf top -p 21483,21485
	perf stat -p 21483,21485 -ddd
	perf record -p 21483,21485

 - Support for per UID views, via the --uid paramter to perf top, perf
   report, etc.  For example 'perf top --uid mingo' will only show the
   tasks that I am running, excluding other users, root, etc.

 - Jump label restructurings and improvements - this includes the
   factoring out of the (hopefully much clearer) include/linux/static_key.h
   generic facility:

	struct static_key key = STATIC_KEY_INIT_FALSE;

	...

	if (static_key_false(&key))
	        do unlikely code
	else
	        do likely code

	...
	static_key_slow_inc();
	...
	static_key_slow_inc();
	...

   The static_key_false() branch will be generated into the code with as
   little impact to the likely code path as possible.  the
   static_key_slow_*() APIs flip the branch via live kernel code patching.

   This facility can now be used more widely within the kernel to
   micro-optimize hot branches whose likelihood matches the static-key
   usage and fast/slow cost patterns.

 - SW function tracer improvements: perf support and filtering support.

 - Various hardenings of the perf.data ABI, to make older perf.data's
   smoother on newer tool versions, to make new features integrate more
   smoothly, to support cross-endian recording/analyzing workflows
   better, etc.

 - Restructuring of the kprobes code, the splitting out of 'optprobes',
   and a corner case bugfix.

 - Allow the tracing of kernel console output (printk).

 - Improvements/fixes to user-space RDPMC support, allowing user-space
   self-profiling code to extract PMU counts without performing any
   system calls, while playing nice with the kernel side.

 - 'perf bench' improvements

 - ... and lots of internal restructurings, cleanups and fixes that made
   these features possible.  And, as usual this list is incomplete as
   there were also lots of other improvements

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (120 commits)
  perf report: Fix annotate double quit issue in branch view mode
  perf report: Remove duplicate annotate choice in branch view mode
  perf/x86: Prettify pmu config literals
  perf report: Enable TUI in branch view mode
  perf report: Auto-detect branch stack sampling mode
  perf record: Add HEADER_BRANCH_STACK tag
  perf record: Provide default branch stack sampling mode option
  perf tools: Make perf able to read files from older ABIs
  perf tools: Fix ABI compatibility bug in print_event_desc()
  perf tools: Enable reading of perf.data files from different ABI rev
  perf: Add ABI reference sizes
  perf report: Add support for taken branch sampling
  perf record: Add support for sampling taken branch
  perf tools: Add code to support PERF_SAMPLE_BRANCH_STACK
  x86/kprobes: Split out optprobe related code to kprobes-opt.c
  x86/kprobes: Fix a bug which can modify kernel code permanently
  x86/kprobes: Fix instruction recovery on optimized path
  perf: Add callback to flush branch_stack on context switch
  perf: Disable PERF_SAMPLE_BRANCH_* when not supported
  perf/x86: Add LBR software filter support for Intel CPUs
  ...

Pull irq/core changes for v3.4 from Ingo Molnar

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Remove paranoid warnons and bogus fixups
  genirq: Flush the irq thread on synchronization
  genirq: Get rid of unnecessary IRQTF_DIED flag
  genirq: No need to check IRQTF_DIED before stopping a thread handler
  genirq: Get rid of unnecessary irqaction field in task_struct
  genirq: Fix incorrect check for forced IRQ thread handler
  softirq: Reduce invoke_softirq() code duplication
  genirq: Fix long-term regression in genirq irq_set_irq_type() handling
  x86-32/irq: Don't switch to irq stack for a user-mode irq

Pull RCU changes for v3.4 from Ingo Molnar.  The major features of this
series are:

 - making RCU more aggressive about entering dyntick-idle mode in order
   to improve energy efficiency

 - converting a few more call_rcu()s to kfree_rcu()s

 - applying a number of rcutree fixes and cleanups to rcutiny

 - removing CONFIG_SMP #ifdefs from treercu

 - allowing RCU CPU stall times to be set via sysfs

 - adding CPU-stall capability to rcutorture

 - adding more RCU-abuse diagnostics

 - updating documentation

 - fixing yet more issues located by the still-ongoing top-to-bottom
   inspection of RCU, this time with a special focus on the CPU-hotplug
   code path.

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
  rcu: Stop spurious warnings from synchronize_sched_expedited
  rcu: Hold off RCU_FAST_NO_HZ after timer posted
  rcu: Eliminate softirq-mediated RCU_FAST_NO_HZ idle-entry loop
  rcu: Add RCU_NONIDLE() for idle-loop RCU read-side critical sections
  rcu: Allow nesting of rcu_idle_enter() and rcu_idle_exit()
  rcu: Remove redundant check for rcu_head misalignment
  PTR_ERR should be called before its argument is cleared.
  rcu: Convert WARN_ON_ONCE() in rcu_lock_acquire() to lockdep
  rcu: Trace only after NULL-pointer check
  rcu: Call out dangers of expedited RCU primitives
  rcu: Rework detection of use of RCU by offline CPUs
  lockdep: Add CPU-idle/offline warning to lockdep-RCU splat
  rcu: No interrupt disabling for rcu_prepare_for_idle()
  rcu: Move synchronize_sched_expedited() to rcutree.c
  rcu: Check for illegal use of RCU from offlined CPUs
  rcu: Update stall-warning documentation
  rcu: Add CPU-stall capability to rcutorture
  rcu: Make documentation give more realistic rcutorture duration
  rcutorture: Permit holding off CPU-hotplug operations during boot
  rcu: Print scheduling-clock information on RCU CPU stall-warning messages
  ...

Conflicts:
	drivers/hid/Makefile

Adds multitouch support for the Gametel Android game controller.

The multitouch events are emulated by the Gametel device. Each physical button
is configured to generate a MT event on a specific coordinate. This seems to be
the only way for us to support Android games that doesn't support HID gamepads.
It is possible to inject MT events at Android level, but this requires root on
the phone.
Signed-off-by: Andreas Nielsen <eas@svep.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Laura Vasilescu <laura@rosedu.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since commit 299b0767(ipv6: Fix IPsec slowpath fragmentation problem)
In func ip6_append_data,after call skb_put(skb, fraglen + dst_exthdrlen)
the skb->len contains dst_exthdrlen,and we don't reduce dst_exthdrlen at last
This will make fraggap>0 in next "while cycle",and cause the size of skb incorrent

Fix this by reserve headroom for dst_exthdrlen.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull core/locking changes for v3.4 from Ingo Molnar

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Simplify return logic
  futex: Cover all PI opcodes with cmpxchg enabled check

Pull core/iommu changes for v3.4 from Ingo Molnar

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/iommu/intel: Increase the number of iommus supported to MAX_IO_APICS
  x86/iommu/intel: Fix identity mapping for sandy bridge

* branch 'dcache-word-accesses':
  vfs: use 'unsigned long' accesses for dcache name comparison and hashing

This does the name hashing and lookup using word-sized accesses when
that is efficient, namely on x86 (although any little-endian machine
with good unaligned accesses would do).

It does very much depend on little-endian logic, but it's a very hot
couple of functions under some real loads, and this patch improves the
performance of __d_lookup_rcu() and link_path_walk() by up to about 30%.
Giving a 10% improvement on some very pathname-heavy benchmarks.

Because we do make unaligned accesses past the filename, the
optimization is disabled when CONFIG_DEBUG_PAGEALLOC is active, and we
effectively depend on the fact that on x86 we don't really ever have the
last page of usable RAM followed immediately by any IO memory (due to
ACPI tables, BIOS buffer areas etc).

Some of the bit operations we do are a bit "subtle".  It's commented,
but you do need to really think about the code.  Or just consider it
black magic.

Thanks to people on G+ for some of the optimized bit tricks.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

For some odd historical reason, the final mixing round for the dentry
cache hash table lookup had an insane "xor with big constant" logic.  In
two places.

The big constant that is being xor'ed is GOLDEN_RATIO_PRIME, which is a
fairly random-looking number that is designed to be *multiplied* with so
that the bits get spread out over a whole long-word.

But xor'ing with it is insane.  It doesn't really even change the hash -
it really only shifts the hash around in the hash table.  To make
matters worse, the insane big constant is different on 32-bit and 64-bit
builds, even though the name hash bits we use are always 32-bit (and the
bits from the pointer we mix in effectively are too).

It's all total voodoo programming, in other words.

Now, some testing and analysis of the hash chains shows that the rest of
the hash function seems to be fairly good.  It does pick the right bits
of the parent dentry pointer, for example, and while it's generally a
bad idea to use an xor to mix down the upper bits (because if there is a
repeating pattern, the xor can cause "destructive interference"), it
seems to not have been a disaster.

For example, replacing the hash with the normal "hash_long()" code (that
uses the GOLDEN_RATIO_PRIME constant correctly, btw) actually just makes
the hash worse.  The hand-picked hash knew which bits of the pointer had
the highest entropy, and hash_long() ends up mixing bits less optimally
at least in some trivial tests.

So the hash function overall seems fine, it just has that really odd
"shift result around by a constant xor".

So get rid of the silly xor, and replace the down-mixing of the bits
with an add instead of an xor that tends to not have the same kind of
destructive interference issues.  Some stats on the resulting hash
chains shows that they look statistically identical before and after,
but the code is simpler and no longer makes you go "WTF?".

Also, the incoming hash really is just "unsigned int", not a long, and
there's no real point to worry about the high 26 bits of the dentry
pointer for the 64-bit case, because they are all going to be identical
anyway.

So also change the hashing to be done in the more natural 'unsigned int'
that is the real size of the actual hashed data anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes:

drivers/built-in.o: In function `qmi_wwan_bind_shared':
qmi_wwan.c:(.text+0x25b686): undefined reference to `usb_cdc_wdm_register'
make[1]: *** [.tmp_vmlinux1] Error 1
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for TI's CPSW driver.

The three port switch gigabit ethernet subsystem provides ethernet packet
communication and can be configured as an ethernet switch. Supports
10/100/1000 Mbps.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Sriramakrishnan A G <srk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TI CPSW ethernet switch has a built-in address lookup engine.  This patch adds
the code necessary for programming this module.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent race condition between commands on comm channel.
Happened while unloading the driver when switching from
event to polling mode. VF got completion on the last command
before switching to polling mode, but toggle was not changed.
After the fix - VF will not write the next command before
toggle is updated.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

Liang Zheng(lzheng@redhat.com) found that in the following topo,
bonding does not send igmp report when we trigger a fail-over of bonding.

eth0--
      |-- bond0 -- br0
eth1--

modprobe bonding mode=1 miimon=100 resend_igmp=10
ifconfig bond0 up
ifenslave bond0 eth0 eth1

brctl addbr br0
ifconfig br0 192.168.100.2/24 up
brctl addif br0 bond0

Add 192.168.100.2(br0) into a multicast group, like 224.10.10.10,
then trigger a fali-over in bonding.
You can see that parameter "resend_igmp" does not work.

The reason is that when we add br0 into a multicast group,
it does not propagate multicast knowledge down to its ports.

If we choose to propagate multicast knowledge down to all ports for bridge,
then we have to track every change that is done to bridge, and keep a backup
for all ports. It is hard to track, I think.

Instead I choose to modify bonding to send igmp report for its master.

Changelog:
V2: correct comments
V3: move this check into bond_resend_igmp_join_requests()
V4: only send igmp reports if bond is enslaved to a bridge
Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>