- 07 May, 2020 3 commits
-
-
David S. Miller authored
Vladimir Oltean says: ==================== FDB fixes for Felix and Ocelot switches This series fixes the following problems: - Dynamically learnt addresses never expiring (neither for Ocelot nor for Felix) - Half of the FDB not visible in 'bridge fdb show' (for Felix only) ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
One may notice that automatically-learnt entries 'never' expire, even though the bridge configures the address age period at 300 seconds. Actually the value written to hardware corresponds to a time interval 1000 times higher than intended, i.e. 83 hours. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Faineli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC addresses would appear, sometimes they wouldn't. Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192 entries on VSC9959 (Felix), so the existing code from the Ocelot common library only dumped half of Felix's MAC table. They are both organized as a 4-way set-associative TCAM, so we just need a single variable indicating the correct number of rows. Fixes: 56051948 ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by:
-
- 06 May, 2020 7 commits
-
-
Vladimir Oltean authored
It looks like the sja1105 external timestamping input is not as generic as we thought. When fed a signal with 50% duty cycle, it will timestamp both the rising and the falling edge. When fed a short pulse signal, only the timestamp of the falling edge will be seen in the PTPSYNCTS register, because that of the rising edge had been overwritten. So the moral is: don't feed it short pulse inputs. Luckily this is not a complete deal breaker, as we can still work with 1 Hz square waves. But the problem is that the extts polling period was not dimensioned enough for this input signal. If we leave the period at half a second, we risk losing timestamps due to jitter in the measuring process. So we need to increase it to 4 times per second. Also, the very least we can do to inform the user is to deny any other flags combination than with PTP_RISING_EDGE and PTP_FALLING_EDGE both set. Fixes: 747e5eb3 ("net: dsa: sja1105: configure the PTP_CLK pin as EXT_TS or PER_OUT") Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Since chunk_size is no longer an integer, we can not use it directly as an argument of setsockopt(). This patch should fix tcp_mmap for Big Endian kernels. Fixes: 597b01ed ("selftests: net: avoid ptl lock contention in tcp_mmap") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Arjun Roy <arjunroy@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Murali Karicheri authored
Fix following sparse checker warning:- net/hsr/hsr_slave.c:38:18: warning: incorrect type in assignment (different base types) net/hsr/hsr_slave.c:38:18: expected unsigned short [unsigned] [usertype] protocol net/hsr/hsr_slave.c:38:18: got restricted __be16 [usertype] h_proto net/hsr/hsr_slave.c:39:25: warning: restricted __be16 degrades to integer net/hsr/hsr_slave.c:39:57: warning: restricted __be16 degrades to integer Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Antoine Tenart authored
netdev_update_features() must be called with the rtnl lock taken. Not doing so triggers a warning, as ASSERT_RTNL() is used in __netdev_update_features(), the first function called by netdev_update_features(). Fix this. Fixes: c850240b ("net: macsec: report real_dev features when HW offloading is enabled") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Dan Carpenter authored
The "info->fs.location" is a u32 that comes from the user via the ethtool_set_rxnfc() function. We need to check for invalid values to prevent a buffer overflow. I copy and pasted this check from the mvpp2_ethtool_cls_rule_ins() function. Fixes: 90b509b3 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The "rss_context" variable comes from the user via ethtool_get_rxfh(). It can be any u32 value except zero. Eventually it gets passed to mvpp22_rss_ctx() and if it is over MVPP22_N_RSS_TABLES (8) then it results in an array overflow. Fixes: 895586d5 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables") Signed-off-by:
-
Eric Dumazet authored
We added fields in tcp_zerocopy_receive structure, so make sure to clear all fields to not pass garbage to the kernel. We were lucky because recent additions added 'out' parameters, still we need to clean our reference implementation, before folks copy/paste it. Fixes: c8856c05 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.") Fixes: 33946518 ("tcp-zerocopy: Return sk_err (if set) along with tcp receive zerocopy.") Signed-off-by:
-
- 05 May, 2020 2 commits
-
-
Roman Mashak authored
When a new neighbor entry has been added, event is generated but it does not include protocol, because its value is assigned after the event notification routine has run, so move protocol assignment code earlier. Fixes: df9b0e30 ("neighbor: Add protocol attribute") Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Dejin Zheng authored
Commit d7a5502b ("net: broadcom: convert to devm_platform_ioremap_resource_byname()") will broke this driver. idm_base and nicpm_base were optional, after this change, they are mandatory. it will probe fails with -22 when the dtb doesn't have them defined. so revert part of this commit and make idm_base and nicpm_base as optional. Fixes: d7a5502b ("net: broadcom: convert to devm_platform_ioremap_resource_byname()") Reported-by:
Jonathan Richardson <jonathan.richardson@broadcom.com> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ray Jui <ray.jui@broadcom.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Acked-by:
-
- 04 May, 2020 13 commits
-
-
Qiushi Wu authored
In function nfp_abm_vnic_set_mac, pointer nsp is allocated by nfp_nsp_open. But when nfp_nsp_has_hwinfo_lookup fail, the pointer is not released, which can lead to a memory leak bug. Fix this issue by adding nfp_nsp_close(nsp) in the error path. Fixes: f6e71efd ("nfp: abm: look up MAC addresses via management FW") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Cong Wang authored
In lec_arp_clear_vccs() only entry->vcc is freed, but vcc could be installed on entry->recv_vcc too in lec_vcc_added(). This fixes the following memory leak: unreferenced object 0xffff8880d9266b90 (size 16): comm "atm2", pid 425, jiffies 4294907980 (age 23.488s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 6b 6b 6b a5 ............kkk. backtrace: [<(____ptrval____)>] kmem_cache_alloc_trace+0x10e/0x151 [<(____ptrval____)>] lane_ioctl+0x4b3/0x569 [<(____ptrval____)>] do_vcc_ioctl+0x1ea/0x236 [<(____ptrval____)>] svc_ioctl+0x17d/0x198 [<(____ptrval____)>] sock_do_ioctl+0x47/0x12f [<(____ptrval____)>] sock_ioctl+0x2f9/0x322 [<(____ptrval____)>] vfs_ioctl+0x1e/0x2b [<(____ptrval____)>] ksys_ioctl+0x61/0x80 [<(____ptrval____)>] __x64_sys_ioctl+0x16/0x19 [<(____ptrval____)>] do_syscall_64+0x57/0x65 [<(____ptrval____)>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Cc: Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by:Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Cong Wang authored
Gengming reported a UAF in lec_arp_clear_vccs(), where we add a vcc socket to an entry in a per-device list but free the socket without removing it from the list when vcc->dev is NULL. We need to call lec_vcc_close() to search and remove those entries contain the vcc being destroyed. This can be done by calling vcc->push(vcc, NULL) unconditionally in vcc_destroy_socket(). Another issue discovered by Gengming's reproducer is the vcc->dev may point to the static device lecatm_dev, for which we don't need to register/unregister device, so we can just check for vcc->dev->ops->owner. Reported-by:
Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by:
-
Colin Ian King authored
The multiplication of cfg->ctr[1] by 1000000000 is performed using a 32 bit multiplication (since cfg->ctr[1] is a u32) and this can lead to a potential overflow. Fix this by making the constant a ULL to ensure a 64 bit multiply occurs. Fixes: 504723af ("net: stmmac: Add basic EST support for GMAC5+") Addresses-Coverity: ("Unintentional integer overflow") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Cong Wang authored
When we tell kernel to dump filters from root (ffff:ffff), those filters on ingress (ffff:0000) are matched, but their true parents must be dumped as they are. However, kernel dumps just whatever we tell it, that is either ffff:ffff or ffff:0000: $ nl-cls-list --dev=dummy0 --parent=root cls basic dev dummy0 id none parent root prio 49152 protocol ip match-all cls basic dev dummy0 id :1 parent root prio 49152 protocol ip match-all $ nl-cls-list --dev=dummy0 --parent=ffff: cls basic dev dummy0 id none parent ffff: prio 49152 protocol ip match-all cls basic dev dummy0 id :1 parent ffff: prio 49152 protocol ip match-all This is confusing and misleading, more importantly this is a regression since 4.15, so the old behavior must be restored. And, when tc filters are installed on a tc class, the parent should be the classid, rather than the qdisc handle. Commit edf6711c ("net: sched: remove classid and q fields from tcf_proto") removed the classid we save for filters, we can just restore this classid in tcf_block. Steps to reproduce this: ip li set dev dummy0 up tc qd add dev dummy0 ingress tc filter add dev dummy0 parent ffff: protocol arp basic action pass tc filter show dev dummy0 root Before this patch: filter protocol arp pref 49152 basic filter protocol arp pref 49152 basic handle 0x1 action order 1: gact action pass random type none pass val 0 index 1 ref 1 bind 1 After this patch: filter parent ffff: protocol arp pref 49152 basic filter parent ffff: protocol arp pref 49152 basic handle 0x1 action order 1: gact action pass random type none pass val 0 index 1 ref 1 bind 1 Fixes: a10fa201 ("net: sched: propagate q and parent from caller down to tcf_fill_node") Fixes: edf6711c ("net: sched: remove classid and q fields from tcf_proto") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Arnd Bergmann authored
gcc-10 warns about functions that return a pointer to a stack variable. In chcr_write_cpl_set_tcb_ulp(), this does not actually happen, but it's too hard to see for the compiler: drivers/crypto/chelsio/chcr_ktls.c: In function 'chcr_write_cpl_set_tcb_ulp.constprop': drivers/crypto/chelsio/chcr_ktls.c:760:9: error: function may return address of local variable [-Werror=return-local-addr] 760 | return pos; | ^~~ drivers/crypto/chelsio/chcr_ktls.c:712:5: note: declared here 712 | u8 buf[48] = {0}; | ^~~ Split the middle part of the function out into a helper to make it easier to understand by both humans and compilers, which avoids the warning. Fixes: 5a4b9fe7 ("cxgb4/chcr: complete record tx handling") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Julian Wiedmann authored
With the introduction of TX coalescing, .ndo_start_xmit now potentially starts the TX completion timer. So only kill the timer _after_ TX has been disabled. Fixes: ee1e52d1 ("s390/qeth: add TX IRQ coalescing support for IQD devices") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Dejin Zheng authored
the related system resources were not released when enetc_hw_alloc() return error in the enetc_pci_mdio_probe(), add iounmap() for error handling label "err_hw_alloc" to fix it. Fixes: 6517798d ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Tariq Toukan authored
When ENOSPC is set the idx is still valid and gets set to the global MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that ENOSPC is impossible from mlx4_cmd_imm() and gives this warning: drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] 2552 | priv->def_counter[port] = idx; Also, when ENOSPC is returned mlx4_allocate_default_counters should not fail. Fixes: 6de5f7f6 ("net/mlx4_core: Allocate default counter per port") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Aya Levin authored
Devlink health core conditions the reporter's recovery with the expiration of the grace period. This is not relevant for the first recovery. Explicitly demand that the grace period will only apply to recoveries other than the first. Fixes: c8e1da0b ("devlink: Add health report functionality") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Moshe Shemesh <moshe@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Maxim Petrov authored
The paranoidal pointer check in IRQ handler looks very strange - it really protects us only against bogus drivers which request IRQ line with null pointer dev_id. However, the code fragment is incorrect because the dev pointer is used before the actual check which leads to undefined behavior. Remove the check to avoid confusing people with incorrect code. Signed-off-by:
Maxim Petrov <mmrmaximuzz@gmail.com> Signed-off-by:
-
Tuong Lien authored
When an application connects to the TIPC topology server and subscribes to some services, a new connection is created along with some objects - 'tipc_subscription' to store related data correspondingly... However, there is one omission in the connection handling that when the connection or application is orderly shutdown (e.g. via SIGQUIT, etc.), the connection is not closed in kernel, the 'tipc_subscription' objects are not freed too. This results in: - The maximum number of subscriptions (65535) will be reached soon, new subscriptions will be rejected; - TIPC module cannot be removed (unless the objects are somehow forced to release first); The commit fixes the issue by closing the connection if the 'recvmsg()' returns '0' i.e. when the peer is shutdown gracefully. It also includes the other unexpected cases. Acked-by:
Jon Maloy <jmaloy@redhat.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Florian Fainelli authored
Prior to 1d27732f ("net: dsa: setup and teardown ports"), we would not treat failures to set-up an user port as fatal, but after this commit we would, which is a regression for some systems where interfaces may be declared in the Device Tree, but the underlying hardware may not be present (pluggable daughter cards for instance). Fixes: 1d27732f ("net: dsa: setup and teardown ports") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 03 May, 2020 3 commits
-
-
Dejin Zheng authored
A call of the function macb_init() can fail in the function fu540_c000_init. The related system resources were not released then. use devm_platform_ioremap_resource() to replace ioremap() to fix it. Fixes: c218ad55 ("macb: Add support for SiFive FU540-C000") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
Yash Shah <yash.shah@sifive.com> Suggested-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Matt Jolly authored
Add support for Dell Wireless 5816e to drivers/net/usb/qmi_wwan.c Signed-off-by:
Matt Jolly <Kangie@footclan.ninja> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Eric Dumazet authored
Do not assume the attribute has the right size. Fixes: aea5f654 ("net/sched: add skbprio scheduler") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
- 01 May, 2020 12 commits
-
-
Arnd Bergmann authored
The current gcc-10 snapshot produces a false-positive warning: net/core/drop_monitor.c: In function 'trace_drop_common.constprop': cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=] In file included from net/core/drop_monitor.c:23: include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here 36 | __u32 entries; | ^~~~~~~ I reported this in the gcc bugzilla, but in case it does not get fixed in the release, work around it by using a temporary variable. Fixes: 9a8afc8d ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881Signed-off-by:Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Yoshiyuki Kurauchi authored
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI flag since it returns multipart message. This patch adds a new arg "flags" in gtp_genl_fill_info() so that flags can be set by the callers. Signed-off-by:
Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports a warning at service_ofldq() warning: context imbalance in service_ofldq() - unexpected unlock The root cause is the missing annotation at service_ofldq() Add the missing __must_hold(&q->sendq.lock) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Jacob Keller authored
The documentation for the ice driver around "fw.app" has a spelling mistake in variation. Additionally, the language of "shall have a unique name" sounds like a requirement. Reword this to read more like a description or property. Reported-by:
Benjamin Fisher <benjamin.l.fisher@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Jakub Kicinski <kubakici@wp.pl> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Clay McClure authored
Commit d1cbfd77 ("ptp_clock: Allow for it to be optional") changed all PTP-capable Ethernet drivers from `select PTP_1588_CLOCK` to `imply PTP_1588_CLOCK`, "in order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers." As a result it is possible to build PTP-capable Ethernet drivers without the PTP subsystem by deselecting PTP_1588_CLOCK. Drivers are required to handle the missing dependency gracefully. Some PTP-capable Ethernet drivers (e.g., TI_CPSW) factor their PTP code out into separate drivers (e.g., TI_CPTS_MOD). The above commit also changed these PTP-specific drivers to `imply PTP_1588_CLOCK`, making it possible to build them without the PTP subsystem. But as Grygorii Strashko noted in [1]: On Wed, Apr 22, 2020 at 02:16:11PM +0300, Grygorii Strashko wrote: > Another question is that CPTS completely nonfunctional in this case and > it was never expected that somebody will even try to use/run such > configuration (except for random build purposes). In my view, enabling a PTP-specific driver without the PTP subsystem is a configuration error made possible by the above commit. Kconfig should not allow users to create a configuration with missing dependencies that results in "completely nonfunctional" drivers. I audited all network drivers that call ptp_clock_register() but merely `imply PTP_1588_CLOCK` and found five PTP-specific drivers that are likely nonfunctional without PTP_1588_CLOCK: NET_DSA_MV88E6XXX_PTP NET_DSA_SJA1105_PTP MACB_USE_HWSTAMP CAVIUM_PTP TI_CPTS_MOD Note how these symbols all reference PTP or timestamping in their name; this is a clue that they depend on PTP_1588_CLOCK. Change them from `imply PTP_1588_CLOCK` [2] to `depends on PTP_1588_CLOCK`. I'm not using `select PTP_1588_CLOCK` here because PTP_1588_CLOCK has its own dependencies, which `select` would not transitively apply. Additionally, remove the `select NET_PTP_CLASSIFY` from CPTS_TI_MOD; PTP_1588_CLOCK already selects that. [1]: https://lore.kernel.org/lkml/c04458ed-29ee-1797-3a11-7f3f560553e6@ti.com/ [2]: NET_DSA_SJA1105_PTP had never declared any type of dependency on PTP_1588_CLOCK (`imply` or otherwise); adding a `depends on PTP_1588_CLOCK` here seems appropriate. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: d1cbfd77 ("ptp_clock: Allow for it to be optional") Signed-off-by:
Clay McClure <clay@daemons.net> Signed-off-by:
-
Jakub Kicinski authored
Commit d5b90e99 ("devlink: report 0 after hitting end in region read") fixed region dump, but region read still returns a spurious error: $ devlink region read netdevsim/netdevsim1/dummy snapshot 0 addr 0 len 128 0000000000000000 a6 f4 c4 1c 21 35 95 a6 9d 34 c3 5b 87 5b 35 79 0000000000000010 f3 a0 d7 ee 4f 2f 82 7f c6 dd c4 f6 a5 c3 1b ae 0000000000000020 a4 fd c8 62 07 59 48 03 70 3b c7 09 86 88 7f 68 0000000000000030 6f 45 5d 6d 7d 0e 16 38 a9 d0 7a 4b 1e 1e 2e a6 0000000000000040 e6 1d ae 06 d6 18 00 85 ca 62 e8 7e 11 7e f6 0f 0000000000000050 79 7e f7 0f f3 94 68 bd e6 40 22 85 b6 be 6f b1 0000000000000060 af db ef 5e 34 f0 98 4b 62 9a e3 1b 8b 93 fc 17 devlink answers: Invalid argument 0000000000000070 61 e8 11 11 66 10 a5 f7 b1 ea 8d 40 60 53 ed 12 This is a minimal fix, I'll follow up with a restructuring so we don't have two checks for the same condition. Fixes: fdd41ec2 ("devlink: Return right error code in case of errors for region read") Signed-off-by:
-
Nathan Chancellor authored
netvsc_start_xmit is used as a callback function for the ndo_start_xmit function pointer. ndo_start_xmit's return type is netdev_tx_t but netvsc_start_xmit's return type is int. This causes a failure with Control Flow Integrity (CFI), which requires function pointer prototypes and callback function definitions to match exactly. When CFI is in enforcing, the kernel panics. When booting a CFI kernel with WSL 2, the VM is immediately terminated because of this. The splat when CONFIG_CFI_PERMISSIVE is used: [ 5.916765] CFI failure (target: netvsc_start_xmit+0x0/0x10): [ 5.916771] WARNING: CPU: 8 PID: 0 at kernel/cfi.c:29 __cfi_check_fail+0x2e/0x40 [ 5.916772] Modules linked in: [ 5.916774] CPU: 8 PID: 0 Comm: swapper/8 Not tainted 5.7.0-rc3-next-20200424-microsoft-cbl-00001-ged4eb37d2c69-dirty #1 [ 5.916776] RIP: 0010:__cfi_check_fail+0x2e/0x40 [ 5.916777] Code: 48 c7 c7 70 98 63 a9 48 c7 c6 11 db 47 a9 e8 69 55 59 00 85 c0 75 02 5b c3 48 c7 c7 73 c6 43 a9 48 89 de 31 c0 e8 12 2d f0 ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 00 cc cc 00 00 85 f6 74 25 [ 5.916778] RSP: 0018:ffffa803c0260b78 EFLAGS: 00010246 [ 5.916779] RAX: 712a1af25779e900 RBX: ffffffffa8cf7950 RCX: ffffffffa962cf08 [ 5.916779] RDX: ffffffffa9c36b60 RSI: 0000000000000082 RDI: ffffffffa9c36b5c [ 5.916780] RBP: ffff8ffc4779c2c0 R08: 0000000000000001 R09: ffffffffa9c3c300 [ 5.916781] R10: 0000000000000151 R11: ffffffffa9c36b60 R12: ffff8ffe39084000 [ 5.916782] R13: ffffffffa8cf7950 R14: ffffffffa8d12cb0 R15: ffff8ffe39320140 [ 5.916784] FS: 0000000000000000(0000) GS:ffff8ffe3bc00000(0000) knlGS:0000000000000000 [ 5.916785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.916786] CR2: 00007ffef5749408 CR3: 00000002f4f5e000 CR4: 0000000000340ea0 [ 5.916787] Call Trace: [ 5.916788] <IRQ> [ 5.916790] __cfi_check+0x3ab58/0x450e0 [ 5.916793] ? dev_hard_start_xmit+0x11f/0x160 [ 5.916795] ? sch_direct_xmit+0xf2/0x230 [ 5.916796] ? __dev_queue_xmit.llvm.11471227737707190958+0x69d/0x8e0 [ 5.916797] ? neigh_resolve_output+0xdf/0x220 [ 5.916799] ? neigh_connected_output.cfi_jt+0x8/0x8 [ 5.916801] ? ip6_finish_output2+0x398/0x4c0 [ 5.916803] ? nf_nat_ipv6_out+0x10/0xa0 [ 5.916804] ? nf_hook_slow+0x84/0x100 [ 5.916807] ? ip6_input_finish+0x8/0x8 [ 5.916807] ? ip6_output+0x6f/0x110 [ 5.916808] ? __ip6_local_out.cfi_jt+0x8/0x8 [ 5.916810] ? mld_sendpack+0x28e/0x330 [ 5.916811] ? ip_rt_bug+0x8/0x8 [ 5.916813] ? mld_ifc_timer_expire+0x2db/0x400 [ 5.916814] ? neigh_proxy_process+0x8/0x8 [ 5.916816] ? call_timer_fn+0x3d/0xd0 [ 5.916817] ? __run_timers+0x2a9/0x300 [ 5.916819] ? rcu_core_si+0x8/0x8 [ 5.916820] ? run_timer_softirq+0x14/0x30 [ 5.916821] ? __do_softirq+0x154/0x262 [ 5.916822] ? native_x2apic_icr_write+0x8/0x8 [ 5.916824] ? irq_exit+0xba/0xc0 [ 5.916825] ? hv_stimer0_vector_handler+0x99/0xe0 [ 5.916826] ? hv_stimer0_callback_vector+0xf/0x20 [ 5.916826] </IRQ> [ 5.916828] ? hv_stimer_global_cleanup.cfi_jt+0x8/0x8 [ 5.916829] ? raw_setsockopt+0x8/0x8 [ 5.916830] ? default_idle+0xe/0x10 [ 5.916832] ? do_idle.llvm.10446269078108580492+0xb7/0x130 [ 5.916833] ? raw_setsockopt+0x8/0x8 [ 5.916833] ? cpu_startup_entry+0x15/0x20 [ 5.916835] ? cpu_hotplug_enable.cfi_jt+0x8/0x8 [ 5.916836] ? start_secondary+0x188/0x190 [ 5.916837] ? secondary_startup_64+0xa5/0xb0 [ 5.916838] ---[ end trace f2683fa869597ba5 ]--- Avoid this by using the right return type for netvsc_start_xmit. Fixes: fceaf24a ("Staging: hv: add the Hyper-V virtual network driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1009Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
David S. Miller authored
Dan Murphy says: ==================== WoL fixes for DP83822 and DP83tc811 The WoL feature for each device was enabled during boot or when the PHY was brought up which may be undesired. These patches disable the WoL in the config_init. The disabling and enabling of the WoL is now done though the set_wol call. ==================== Signed-off-by: -
Dan Murphy authored
The WoL feature should be disabled when config_init is called and the feature should turned on or off when set_wol is called. In addition updated the calls to modify the registers to use the set_bit and clear_bit function calls. Fixes: 6d749428788b ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Signed-off-by:Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Dan Murphy authored
The WoL feature should be disabled when config_init is called and the feature should turned on or off when set_wol is called. In addition updated the calls to modify the registers to use the set_bit and clear_bit function calls. Fixes: 3b427751a9d0 ("net: phy: DP83822 initial driver submission") Signed-off-by: -
David Ahern authored
Nik reported a bug with pcpu dst cache when nexthop objects are used illustrated by the following: $ ip netns add foo $ ip -netns foo li set lo up $ ip -netns foo addr add 2001:db8:11::1/128 dev lo $ ip netns exec foo sysctl net.ipv6.conf.all.forwarding=1 $ ip li add veth1 type veth peer name veth2 $ ip li set veth1 up $ ip addr add 2001:db8:10::1/64 dev veth1 $ ip li set dev veth2 netns foo $ ip -netns foo li set veth2 up $ ip -netns foo addr add 2001:db8:10::2/64 dev veth2 $ ip -6 nexthop add id 100 via 2001:db8:10::2 dev veth1 $ ip -6 route add 2001:db8:11::1/128 nhid 100 Create a pcpu entry on cpu 0: $ taskset -a -c 0 ip -6 route get 2001:db8:11::1 Re-add the route entry: $ ip -6 ro del 2001:db8:11::1 $ ip -6 route add 2001:db8:11::1/128 nhid 100 Route get on cpu 0 returns the stale pcpu: $ taskset -a -c 0 ip -6 route get 2001:db8:11::1 RTNETLINK answers: Network is unreachable While cpu 1 works: $ taskset -a -c 1 ip -6 route get 2001:db8:11::1 2001:db8:11::1 from :: via 2001:db8:10::2 dev veth1 src 2001:db8:10::1 metric 1024 pref medium Conversion of FIB entries to work with external nexthop objects missed an important difference between IPv4 and IPv6 - how dst entries are invalidated when the FIB changes. IPv4 has a per-network namespace generation id (rt_genid) that is bumped on changes to the FIB. Checking if a dst_entry is still valid means comparing rt_genid in the rtable to the current value of rt_genid for the namespace. IPv6 also has a per network namespace counter, fib6_sernum, but the count is saved per fib6_node. With the per-node counter only dst_entries based on fib entries under the node are invalidated when changes are made to the routes - limiting the scope of invalidations. IPv6 uses a reference in the rt6_info, 'from', to track the corresponding fib entry used to create the dst_entry. When validating a dst_entry, the 'from' is used to backtrack to the fib6_node and check the sernum of it to the cookie passed to the dst_check operation. With the inline format (nexthop definition inline with the fib6_info), dst_entries cached in the fib6_nh have a 1:1 correlation between fib entries, nexthop data and dst_entries. With external nexthops, IPv6 looks more like IPv4 which means multiple fib entries across disparate fib6_nodes can all reference the same fib6_nh. That means validation of dst_entries based on external nexthops needs to use the IPv4 format - the per-network namespace counter. Add sernum to rt6_info and set it when creating a pcpu dst entry. Update rt6_get_cookie to return sernum if it is set and update dst_check for IPv6 to look for sernum set and based the check on it if so. Finally, rt6_get_pcpu_route needs to validate the cached entry before returning a pcpu entry (similar to the rt_cache_valid calls in __mkroute_input and __mkroute_output for IPv4). This problem only affects routes using the new, external nexthops. Thanks to the kbuild test robot for catching the IS_ENABLED needed around rt_genid_ipv6 before I sent this out. Fixes: 5b98324e ("ipv6: Allow routes to use nexthop objects") Reported-by:Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
-
Rahul Lakkireddy authored
Under heavy load, the EOTID termination FLOWC request fails to get enqueued to the end of the Tx ring due to lack of credits. This results in EOTID leak. When disabling TC-MQPRIO offload, the link is already brought down to cleanup EOTIDs. So, flush any pending enqueued skbs that can't be sent outside the wire, to make room for FLOWC request. Also, move the FLOWC descriptor consumption logic closer to when the FLOWC request is actually posted to hardware. Fixes: 0e395b3c ("cxgb4: add FLOWC based QoS offload") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
