- 09 Jan, 2014 5 commits
-
-
Patrick McHardy authored
The table use counter is only increased for new chains, so move the check to the correct position. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Patrick McHardy authored
Chain counter validation is performed after the chain policy has potentially been changed. Move counter validation/setting before changing of the chain policy to fix this. Additionally fix a memory leak if chain counter allocation fails for new chains, remove an unnecessary free_percpu() and move counter allocation for new chains Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Patrick McHardy authored
Currently nf_tables_newchain() atomicity is broken because of having validation of some netlink attributes performed after changing attributes of the chain. The chain policy is (currently) fine, but split it up as preparation for the following fixes and to avoid future mistakes. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
We have to validate that the input register is in the range of allowed registers, otherwise we can take a incorrect register value as input that may lead us to a crash. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Kristian Evensen authored
This patch adds kernel support for setting properties of tracked connections. Currently, only connmark is supported. One use-case for this feature is to provide the same functionality as -j CONNMARK --save-mark in iptables. Some restructuring was needed to implement the set op. The new structure follows that of nft_meta. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 07 Jan, 2014 17 commits
-
-
Patrick McHardy authored
The ct expression can currently not be used in the inet family since we don't have a conntrack module for NFPROTO_INET, so nf_ct_l3proto_try_module_get() fails. Add some manual handling to load the modules for both NFPROTO_IPV4 and NFPROTO_IPV6 if the ct expression is used in the inet family. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Patrick McHardy authored
For L3-proto independant rules we need to get at the L4 protocol value directly. Add it to the nft_pktinfo struct and use the meta expression to retrieve it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Patrick McHardy authored
Needed by multi-family tables to distinguish IPv4 and IPv6 packets. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Patrick McHardy authored
This patch adds a new table family and a new filter chain that you can use to attach IPv4 and IPv6 rules. This should help to simplify rule-set maintainance in dual-stack setups. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Patrick McHardy authored
Add support to register chains to multiple hooks for different address families for mixed IPv4/IPv6 tables. Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Patrick McHardy authored
Multi-family tables need the AF from the hook ops. Add a pointer to the hook ops and replace usage of the hooknum member in struct nft_pktinfo. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Patrick McHardy authored
Currently the AF-specific hook functions override the chain-type specific hook functions. That doesn't make too much sense since the chain types are a special case of the AF-specific hooks. Make the AF-specific hook functions the default and make the optional chain type hooks override them. As a side effect, the necessary code restructuring reduces the code size, f.i. in case of nf_tables_ipv4.o: nf_tables_ipv4_init_net | -24 nft_do_chain_ipv4 | -113 2 functions changed, 137 bytes removed, diff: -137 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
net/netfilter/nft_reject.c: In function 'nft_reject_eval': net/netfilter/nft_reject.c:37:14: warning: unused variable 'net' [-Wunused-variable] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Benjamin Poirier authored
There are many cases where this feature does not improve performance or even reduces it. For example, here are the results from tests that I've run using 3.12.6 on one Intel Xeon W3565 and one i7 920 connected by ixgbe adapters. The results are from the Xeon, but they're similar on the i7. All numbers report the mean±stddev over 10 runs of 10s. 1) latency tests similar to what is described in "c6e1a0d1 net: Allow no-cache copy from user on transmit" There is no statistically significant difference between tx-nocache-copy on/off. nic irqs spread out (one queue per cpu) 200x netperf -r 1400,1 tx-nocache-copy off 692000±1000 tps 50/90/95/99% latency (us): 275±2/643.8±0.4/799±1/2474.4±0.3 tx-nocache-copy on 693000±1000 tps 50/90/95/99% latency (us): 274±1/644.1±0.7/800±2/2474.5±0.7 200x netperf -r 14000,14000 tx-nocache-copy off 86450±80 tps 50/90/95/99% latency (us): 334.37±0.02/838±1/2100±20/3990±40 tx-nocache-copy on 86110±60 tps 50/90/95/99% latency (us): 334.28±0.01/837±2/2110±20/3990±20 2) single stream throughput tests tx-nocache-copy leads to higher service demand throughput cpu0 cpu1 demand (Gb/s) (Gcycle) (Gcycle) (cycle/B) nic irqs and netperf on cpu0 (1x netperf -T0,0 -t omni -- -d send) tx-nocache-copy off 9402±5 9.4±0.2 0.80±0.01 tx-nocache-copy on 9403±3 9.85±0.04 0.838±0.004 nic irqs on cpu0, netperf on cpu1 (1x netperf -T1,1 -t omni -- -d send) tx-nocache-copy off 9401±5 5.83±0.03 5.0±0.1 0.923±0.007 tx-nocache-copy on 9404±2 5.74±0.03 5.523±0.009 0.958±0.002 As a second example, here are some results from Eric Dumazet with latest net-next. tx-nocache-copy also leads to higher service demand (cpu is Intel(R) Xeon(R) CPU X5660 @ 2.80GHz) lpq83:~# ./ethtool -K eth0 tx-nocache-copy on lpq83:~# perf stat ./netperf -H lpq84 -c MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB 87380 16384 16384 10.00 9407.44 2.50 -1.00 0.522 -1.000 Performance counter stats for './netperf -H lpq84 -c': 4282.648396 task-clock # 0.423 CPUs utilized 9,348 context-switches # 0.002 M/sec 88 CPU-migrations # 0.021 K/sec 355 page-faults # 0.083 K/sec 11,812,797,651 cycles # 2.758 GHz [82.79%] 9,020,522,817 stalled-cycles-frontend # 76.36% frontend cycles idle [82.54%] 4,579,889,681 stalled-cycles-backend # 38.77% backend cycles idle [67.33%] 6,053,172,792 instructions # 0.51 insns per cycle # 1.49 stalled cycles per insn [83.64%] 597,275,583 branches # 139.464 M/sec [83.70%] 8,960,541 branch-misses # 1.50% of all branches [83.65%] 10.128990264 seconds time elapsed lpq83:~# ./ethtool -K eth0 tx-nocache-copy off lpq83:~# perf stat ./netperf -H lpq84 -c MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB 87380 16384 16384 10.00 9412.45 2.15 -1.00 0.449 -1.000 Performance counter stats for './netperf -H lpq84 -c': 2847.375441 task-clock # 0.281 CPUs utilized 11,632 context-switches # 0.004 M/sec 49 CPU-migrations # 0.017 K/sec 354 page-faults # 0.124 K/sec 7,646,889,749 cycles # 2.686 GHz [83.34%] 6,115,050,032 stalled-cycles-frontend # 79.97% frontend cycles idle [83.31%] 1,726,460,071 stalled-cycles-backend # 22.58% backend cycles idle [66.55%] 2,079,702,453 instructions # 0.27 insns per cycle # 2.94 stalled cycles per insn [83.22%] 363,773,213 branches # 127.757 M/sec [83.29%] 4,242,732 branch-misses # 1.17% of all branches [83.51%] 10.128449949 seconds time elapsed CC: Tom Herbert <therbert@google.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
When lo is brought up, new ifa is created. Then, devconf and neigh values bitfield should be set so later changes of default values would not affect lo values. Note that the same behaviour is in ipv6. Also note that this is likely not an issue in many distros (for example Fedora 19) because userspace sets address to lo manually before bringing it up. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
FX Le Bail authored
This change allows to follow a recommandation of RFC4942. - Add "anycast_src_echo_reply" sysctl to control the use of anycast addresses as source addresses for ICMPv6 echo reply. This sysctl is false by default to preserve existing behavior. - Add inline check ipv6_anycast_destination(). - Use them in icmpv6_echo_reply(). Reference: RFC4942 - IPv6 Transition/Coexistence Security Considerations (http://tools.ietf.org/html/rfc4942#section-2.1.6) 2.1.6. Anycast Traffic Identification and Security [...] To avoid exposing knowledge about the internal structure of the network, it is recommended that anycast servers now take advantage of the ability to return responses with the anycast address as the source address if possible. Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0. Fixes: 837052d0 ('net/mlx4_en: Add netdev support for TCP/IP offloads of vxlan tunneling') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hayes Wang authored
- Replace pr_warn_ratelimited() with net_ratelimit() and netdev_warn(). - Adjust the algnment of some messages. - Remove the peroid. - Fix some messages don't have terminating newline. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
> as reported for linux-next of Dec.20, 2013 > when CONFIG_NEED_DMA_MAP_STATE is not enabled: > > drivers/net/ethernet/brocade/bna/bnad.c: In function 'bnad_start_xmit': > drivers/net/ethernet/brocade/bna/bnad.c:3074:26: error: 'struct bnad_tx_vector' has no member named 'dma_len' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
GRO/GSO layers can be enabled on a node, even if said node is only forwarding packets. This patch permits GSO (and upcoming GRO) support for GRE encapsulated packets, even if the host has no GRE tunnel setup. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
This fixes some typos found by Sergei. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitchDavid S. Miller authored
Jesse Gross says: ==================== [GIT net-next] Open vSwitch Open vSwitch changes for net-next/3.14. Highlights are: * Performance improvements in the mechanism to get packets to userspace using memory mapped netlink and skb zero copy where appropriate. * Per-cpu flow stats in situations where flows are likely to be shared across CPUs. Standard flow stats are used in other situations to save memory and allocation time. * A handful of code cleanups and rationalization. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Jan, 2014 18 commits
-
-
Stephen Hemminger authored
Several functions and datastructures could be local Found with 'make namespacecheck' Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
The copy & csum optimization is no longer present with zerocopy enabled. Compute the checksum in skb_gso_segment() directly by dropping the HW CSUM capability from the features passed in. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
Use of skb_zerocopy() can avoid the expensive call to memcpy() when copying the packet data into the Netlink skb. Completes checksum through skb_checksum_help() if not already done in GSO segmentation. Zerocopy is only performed if user space supported unaligned Netlink messages. memory mapped netlink i/o is preferred over zerocopy if it is set up. Cost of upcall is significantly reduced from: + 7.48% vhost-8471 [k] memcpy + 5.57% ovs-vswitchd [k] memcpy + 2.81% vhost-8471 [k] csum_partial_copy_generic to: + 5.72% ovs-vswitchd [k] memcpy + 3.32% vhost-5153 [k] memcpy + 0.68% vhost-5153 [k] skb_zerocopy (megaflows disabled) Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
Allows removing the net and dp_ifindex argument and simplify the code. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
Drop user features if an outdated user space instance that does not understand the concept of user_features attempted to create a new datapath. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
Make the skb zerocopy logic written for nfnetlink queue available for use by other modules. Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Wei Yongjun authored
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Daniel Borkmann authored
As we're only doing a kfree() anyway in the RCU callback, we can simply use kfree_rcu, which does the same job, and remove the function rcu_free_sw_flow_mask_cb() and rcu_free_acts_callback(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Pravin B Shelar authored
With mega flow implementation ovs flow can be shared between multiple CPUs which makes stats updates highly contended operation. This patch uses per-CPU stats in cases where a flow is likely to be shared (if there is a wildcard in the 5-tuple and therefore likely to be spread by RSS). In other situations, it uses the current strategy, saving memory and allocation time. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
Use memory mapped Netlink i/o for all unicast openvswitch communication if a ring has been set up. Benchmark * pktgen -> ovs internal port * 5M pkts, 5M flows * 4 threads, 8 cores Before: Result: OK: 67418743(c67108212+d310530) usec, 5000000 (9000byte,0frags) 74163pps 5339Mb/sec (5339736000bps) errors: 0 + 2.98% ovs-vswitchd [k] copy_user_generic_string + 2.49% ovs-vswitchd [k] memcpy + 1.84% kpktgend_2 [k] memcpy + 1.81% kpktgend_1 [k] memcpy + 1.81% kpktgend_3 [k] memcpy + 1.78% kpktgend_0 [k] memcpy After: Result: OK: 24229690(c24127165+d102524) usec, 5000000 (9000byte,0frags) 206358pps 14857Mb/sec (14857776000bps) errors: 0 + 2.80% ovs-vswitchd [k] memcpy + 1.31% kpktgend_2 [k] memcpy + 1.23% kpktgend_0 [k] memcpy + 1.09% kpktgend_1 [k] memcpy + 1.04% kpktgend_3 [k] memcpy + 0.96% ovs-vswitchd [k] copy_user_generic_string Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
An insufficent ring frame size configuration can lead to an unnecessary skb allocation for every Netlink message. Check frame size before taking the queue lock and allocating the skb and re-check with lock to be safe. Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
Allocates a new sk_buff large enough to cover the specified payload plus required Netlink headers. Will check receiving socket for memory mapped i/o capability and use it if enabled. Will fall back to non-mapped skb if message size exceeds the frame size of the ring. Signed-of-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Jesse Gross authored
Flow lookup can happen either in packet processing context or userspace context but it was annotated as requiring RCU read lock to be held. This also allows OVS mutex to be held without causing warnings. Reported-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Reviewed-by: Thomas Graf <tgraf@redhat.com>
-
Andy Zhou authored
API changes only for code readability. No functional chnages. This patch removes the underscored version. Added a new API ovs_flow_tbl_lookup_stats() that returns the n_mask_hits. Reported by: Ben Pfaff <blp@nicira.com> Reviewed-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Ben Pfaff authored
We won't normally have a ton of flow masks but using a size_t to store values no bigger than sizeof(struct sw_flow_key) seems excessive. This reduces sw_flow_key_range and sw_flow_mask by 4 bytes on 32-bit systems. On 64-bit systems it shrinks sw_flow_key_range by 12 bytes but sw_flow_mask only by 8 bytes due to padding. Compile tested only. Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Ben Pfaff authored
Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c net/ipv6/ip6_tunnel.c net/ipv6/ip6_vti.c ipv6 tunnel statistic bug fixes conflicting with consolidation into generic sw per-cpu net stats. qlogic conflict between queue counting bug fix and the addition of multiple MAC address support. Signed-off-by: David S. Miller <davem@davemloft.net>
-