- 13 Nov, 2012 5 commits
-
-
Greg Rose authored
There's no need to support up to 15k buffers since the HW is limited to 9.5k in SR-IOV mode. Instead, allocate buffers that fit and align inside of a 32K memory buffer. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Greg Rose authored
napi_gro_receive shouldn't be called from netpoll context. Doing so was causing kernel panics when jumbo frames larger than 2K were set. Add a flag to check if the Rx ring processing is occurring from interrupt context or from netpoll context and call netif_rx() if in the polling context. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Emil Tantilov authored
This patch resolves the following warning: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_probe’: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1742:290: warning: ‘err’ may be used uninitialized in this function [-Wuninitialized] drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1717:6: note: ‘err’ was declared here Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
This driver cannot work without MSI-X interrupts so there is no mechanism to fall back to. Signed-off-by: Jakub Kicinski <jakub.kicinski@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
The way the code was previously written it was causing DCA to prefetch the entire packet into the cache when it was enabled. That is excessive as we only really need the headers. We are now prefetching the headers via software so doing this from DCA would be redundant anyway. So clear the bit that was causing us to prefetch the packet data and instead only use DCA for the descriptor rings. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Nov, 2012 1 commit
-
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Nov, 2012 2 commits
-
-
Kirill Smelkov authored
Since eab6d18d (vlan: Don't check for vlan group before vlan_tx_tag_present.) we don't check tp->vlgrp and thus tp is not needed in this function. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
-
Dayanidhi Sreenivasan authored
Signed-off-by: Dayanidhi Sreenivasan <dayanidhi.sreenivasan@gmail.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
-
- 10 Nov, 2012 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c Minor conflict between the BCM_CNIC define removal in net-next and a bug fix added to net. Based upon a conflict resolution patch posted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Nov, 2012 20 commits
-
-
Nicolas Dichtel authored
Spotted after a code review. Introduced by c12b395a (gre: Support GRE over IPv6). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masanari Iida authored
Correct spelling typo in printk within drivers/isdn Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wang Dongsheng authored
If a gianfar ethernet device is down prior to hibernating a system, it will no longer be present upon system restore. For example: ~# ifconfig eth0 down ~# echo disk > /sys/power/state <trigger a restore from hibernation> ~# ifconfig eth0 up SIOCSIFFLAGS: No such device This happens because the restore function bails out early upon finding devices that were not up at hibernation. In doing so, it never gets to the netif_device_attach call at the end of the restore function. Adding the netif_device_attach as done here also makes the gfar_restore code consistent with what is done in the gfar_resume code. Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
Should gfar_init_bds() return with -ENOMEM inside gfar_alloc_skb_resources(), free_skb_resources() will be called twice in a row on the "cleanup" path, leading to duplicate kfree() calls for rx_|tx_queue->rx_|tx_skbuff resulting in segmentation fault. This patch prevents the segmentation fault to happen in the future (rx_|tx_sbkbuff set to NULL), and corrects the error path handling for gfar_init_bds(). Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amerigo Wang authored
These can be converted to net_*_ratelimited(). Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sasha Levin authored
Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In commit 6b78f16e (gre: add GSO support) we added GSO support to GRE tunnels. This patch does the same for IPIP tunnels. Performance of single TCP flow over an IPIP tunnel is increased by 40% Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steve Glendinning authored
when something goes wrong, a flood of these messages can be generated by usbnet (thousands per second). This doesn't generally *help* the condition so this patch ratelimits the rate of their generation. There's an underlying problem in usbnet's kevent deferral mechanism which needs fixing, specifically that events *can* get dropped and not handled. This patch doesn't address this, but just mitigates fallout caused by the current implemention. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
This improves the packet_mmap.txt document in the following ways: * Add initial information about different TPACKET versions * Add initial information about packet fanout * Add pointer to BPF document (since this also could be of interest) * 'Fix' minor, rather cosmetic things Information partially taken from related commit messages. Reported-by: Ronny Meeus <ronny.meeus@gmail.com> Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Cc: Ulisses Alonso Camaró <uaca@alumni.uv.es> Cc: Johann Baudy <johann.baudy@gnu-log.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nick Bowler authored
This adds a phy_id sysfs attribute to MDIO devices, containing the 32-bit PHY identifier reported by the device. This attribute can be useful when debugging problems related to phy drivers. Other enumerable buses already have similar attributes. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Make the wanxl firmware array const so that it goes in the read-only section. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Fix the wanxl firmware to include missing constants such as PARITY_NONE. It should be #including the linux/hdlc/ioctl.h header. To make this work, we also have to guard parts of ioctl.h with !__ASSEMBLY__. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
The wanxl firmware needs access to some bits of UAPI stuff, so the -I flag in the Makefile needs adjusting to point at the UAPI headers. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
As documented in RFC4861 (Neighbor Discovery for IP version 6) 7.2.6., unsolicited neighbour advertisements should be sent to the all-nodes multicast address. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amerigo Wang authored
Some people wants to log only oops messages via netconsole, (this is also why netoops was invented) so add a module option for netconsole. This can be tuned via /sys/module/netconsole/parameters/oops_only at run time as well. Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Doug Goldstein authored
Sets the sysfs device_type to 'vlan' for udev. This makes it easier for applications that query network information via udev to identify vlans instead of using strrchr(). Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nobuhiro Iwamatsu authored
The shmobile SH7377 already was removed from source tree. This remove SH7377 support for sh-irda. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nobuhiro Iwamatsu authored
The shmobile SH7367 already was removed from source tree. This remove SH7367 support for sh-irda. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
6431cbc2(Create a mechanism for upward inetpeer propagation into routes) introduces these codes, but this mechanism is never enabled since rt6i_peer_genid always is zero whether it is not assigned or assigned by rt6_peer_genid(). After 5943634f (ipv4: Maintain redirect and PMTU info in struct rtable again), the ipv4 related codes of this mechanism has been removed, I think we maybe able to remove them now. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Nov, 2012 6 commits
-
-
Ian Coolidge authored
cdc_eem frames might need to contain 802.1Q VLAN Ethernet frames. URB/skb sizing from usbnet will default to the hard_mtu, so account for the VLAN header by expanding that via hard_header_len Signed-off-by: Ian Coolidge <iancoolidge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ian Coolidge authored
Checking skb->len against ETH_FRAME_LEN assumes a 1514 ethernet frame size. With an 802.1Q VLAN header, ethernet frame length can now be 1518. Validate frame length against that. Signed-off-by: Ian Coolidge <iancoolidge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - minimal fixes to the packet layout to avoid the __packed attribute when not needed - new packet type called UNICAST_4ADDR: in this packet it is possible to find both source and destination node (in the classic UNICAST header only the destination field exists). - a new feature: Distributed ARP Table (D.A.T.). It aims to reduce ARP lookups latency by means of a simil-DHT approach.
-
Nicolas Dichtel authored
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vipul Pandya authored
INGPADBOUNDARY_MASK is already shifted. No need to shift it again. On reloading a driver it was resulting in a bad SGE FL MTU sizes [1536, 9088] error. This only causes an issue on systems that have L1 cache size of 32B, 128B, 512B, 2048B or 4096B. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Nov, 2012 2 commits
-
-
Lee Jones authored
It doesn't make much sense to enable ISDN services if you don't intend to connect to a network. Therefore insisting that ISDN depends on NETDEVICES seems logical. We can then remove any guards mentioning NETDEVICES inside all subordinate drivers. This also has the nice side-effect of fixing the warning below when ISDN_I4L && !CONFIG_NETDEVICES at compile time. This patch fixes: drivers/isdn/i4l/isdn_common.c: In function ‘isdn_ioctl’: drivers/isdn/i4l/isdn_common.c:1278:8: warning: unused variable ‘s’ [-Wunused-variable] Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Merav Sicron authored
This patch replaces the BCM_CNIC define with a flag which can change at run-time and which does not use the CONFIG_CNIC kconfig option. For the PF/hypervisor driver cnic is always supported, however allocation of cnic resources and configuration of the HW for offload mode is done only when the cnic module registers bnx2x. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-