Florian Fainelli says:

====================
net: systemport: TX/NAPI improvements

This patch series builds up on Doug's latest changes done in BCMGENET to reduce
the number of spurious interrupts in NAPI, simplify pointer arithmetic and
finally tracking of per TX ring statistics to be SMP friendly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to c298ede2 ("net: bcmgenet: simplify circular pointer
arithmetic") we don't need to complex arthimetic since we always have a
ring size that is a power of 2.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do something similar to commit d5810ca3 ("net: bcmgenet: clear
status to reduce spurious interrupts") and clear interrupts right before
servicing them. This reduces the number of interrupts by 10K
interrupts/sec for a TX TCP session 1Gbits/sec.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bcm_sysport_tx_reclaim_one() is currently summing TX bytes/packets in a
way that is not SMP friendly, mutliples CPUs could run
bcm_sysport_tx_reclaim_one() independently and still update
stats->tx_bytes and stats->tx_packets, cloberring the other CPUs
statistics.

Fix this by tracking per TX rings the number of bytes, packets,
dropped and errors statistics, and provide a bcm_sysport_get_nstats()
function which aggregates everything and returns a consistent output.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: phy: Allow splitting MDIO bus/device support

This patch series allows building support for MDIO bus controllers which
are sometimes usable and necessary in cases where there are no Ethernet PHYs.

Changes in v3:
- corrected of_mdio compile guards for prototypes vs. stubs
- added a missing OF_MDIO dependency for MDIO_BCM_UNIMAC
- fixed Kbuild bot reported errors against mdio-bitbang

Changes in v2:
- implement Russell's feedback
- solve the circular dependency in the CONFIG_MDIO_DEVICE + CONFIG_PHYLIB case
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a new configuration symbol: MDIO_DEVICE which allows building
the MDIO devices and bus code, without pulling in the entire Ethernet
PHY library and devices code.

PHYLIB nows select MDIO_DEVICE and the relevant Makefile files are
updated to reflect that.

When MDIO_DEVICE (MDIO bus/device only) is selected, but not PHYLIB, we
have mdio-bus.ko as a loadable module, and it does not have a
module_exit() function because the safety of removing a bus class is
unclear.

When both MDIO_DEVICE and PHYLIB are enabled, we need to assemble
everything into a common loadable module: libphy.ko because of nasty
circular dependencies between phy.c, phy_device.c and mdio_bus.c which
are really tough to untangle.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Broadcom MDIO UniMAC driver uses routines provided by of_mdio.c which is
guarded by CONFIG_OF_MDIO.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CONFIG_OF_MDIO is actually what triggers the build of drivers/of/of_mdio.c, so
providing inline stubs when CONFIG_OF_MDIO=y should be based on that symbol as
well.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_choke is classless qdisc so it does not define cl_ops. Therefore
filter_list cannot be ever changed, being NULL all the time.
Reason is this check in tc_ctl_tfilter:

	/* Is it classful? */
	cops = q->ops->cl_ops;
	if (!cops)
		return -EINVAL;

So remove this dead code.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Two different set_mac functions exists but stmmac_dwmac4_set_mac() is
only used for enabling and never for disabling.
So on dwmac4, the MAC RX/TX is never disabled.

This patch add a generic function pointer set_mac() to stmmac_ops and
replace all call to stmmac_set_mac/stmmac_dwmac4_set_mac by a call to
this pointer.

Since dwmac4_ops is const, set_mac cannot be modified after, and so dwmac4_ops
is duplioacted like dwmac4_dma_ops.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use setup_timer() instead of init_timer() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says

====================
net: bridge: allow user-space to add ext learned entries

This set adds the ability to add externally learned entries from
user-space. For symmetry and proper function we need to allow SW entries
to take over HW learned ones (similar to how HW can take over SW entries
currently) which is needed for our use case (evpn) where we have pure SW
ports and HW ports mixed in a single bridge. This does not play well with
switchdev devices currently because there's no feedback when the entry is
taken over, but this case has never worked anyway and feedback can be
easily added when needed.
Patch 02 simply allows to use NTF_EXT_LEARNED from user-space, we already
have Quagga patches that make use of this functionality.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The NTF_EXT_LEARNED flag was added for switchdev and externally learned
entries, but it can also be used for entries learned via a software
in user-space which requires dynamic entries that do not expire.
One such case that we have is with quagga and evpn which need dynamic
entries but also require to age them themselves.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow to take over an entry which was previously learned via HW when it
shows up from a SW port. This is analogous to how HW takes over SW learned
entries already.
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We don't use it during development and we can't extend it either, so
remove it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

after act_csum computes the checksum on skbs carrying GSO TCP/UDP packets,
subsequent segmentation fails because skb_needs_check(skb, true) returns
true. Because of that, skb_warn_bad_offload() is invoked and the following
message is displayed:

WARNING: CPU: 3 PID: 28 at net/core/dev.c:2553 skb_warn_bad_offload+0xf0/0xfd
<...>

  [<ffffffff8171f486>] skb_warn_bad_offload+0xf0/0xfd
  [<ffffffff8161304c>] __skb_gso_segment+0xec/0x110
  [<ffffffff8161340d>] validate_xmit_skb+0x12d/0x2b0
  [<ffffffff816135d2>] validate_xmit_skb_list+0x42/0x70
  [<ffffffff8163c560>] sch_direct_xmit+0xd0/0x1b0
  [<ffffffff8163c760>] __qdisc_run+0x120/0x270
  [<ffffffff81613b3d>] __dev_queue_xmit+0x23d/0x690
  [<ffffffff81613fa0>] dev_queue_xmit+0x10/0x20

Since GSO is able to compute checksum on individual segments of such skbs,
we can simply skip mangling the packet.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver "dwc-xlgmac" is dual-licensed.
Declare the dual license with MODULE_LICENSE().
Signed-off-by: Jie Deng <jiedeng@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver "dwc-xlgmac" is dual-licensed. This patch adds
declaration of dual license in file headers.
Signed-off-by: Jie Deng <jiedeng@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Chenbo Feng says:

====================
net: core: Two Helper function about socket information

Introduce two eBpf helper function to get the socket cookie and
socket uid for each packet. The helper function is useful when
the *sk field inside sk_buff is not empty. These helper functions
can be used on socket and uid based traffic monitoring programs.

Change since V7:
* change the user namespace of uid helper function to sock_net(sk)->user_ns

Change since V6:
* change the user namespace of uid helper function back to init_user_ns
  since in some situation, for example, pinned bpf object, the current
  user namespace is not always applicable.

Change since V5:
* Delete unnecessary blank lines in sample program.
* Refine the variable orders in get_uid helper function.

Change since V4:
* Using current user namespace to get uid instead of using init_ns.
* Add compiling setup of example program in to Makefile.
* Change the name style of the example program binaries.

Change since V3:
* Fixed some typos and incorrect comments in sample program
* replaced raw insns with BPF_STX_XADD and add it to libbpf.h
* Use a temp dir as mount point instead and added a check for
  the user input string.
* Make the get uid helper function returns the user namespace uid
  instead of kuid.
* Return a overflowuid instead of 0 when no uid information is found.

Change since V2:
* Add a sample program to demostrate the usage of the helper function.
* Moved the helper function proto invoking place.
* Add function header into tools/include
* Apply sk_to_full_sk() before getting uid.

Change since V1:
* Removed the unnecessary declarations and export command
* resolved conflict with master branch.
* Examine if the socket is a full socket before getting the uid.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a sample program to demostrate the possible usage of
get_socket_cookie and get_socket_uid helper function. The program will
store bytes and packets counting of in/out traffic monitored by iptables
and store the stats in a bpf map in per socket base. The owner uid of
the socket will be stored as part of the data entry. A shell script for
running the program is also included.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Returns the owner uid of the socket inside a sk_buff. This is useful to
perform per-UID accounting of network traffic or per-UID packet
filtering. The socket need to be a fullsock otherwise overflowuid is
returned.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Retrieve the socket cookie generated by sock_gen_cookie() from a sk_buff
with a known socket. Generates a new cookie if one was not yet set.If
the socket pointer inside sk_buff is NULL, 0 is returned. The helper
function coud be useful in monitoring per socket networking traffic
statistics and provide a unique socket identifier per namespace.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/ethernet/broadcom/genet/bcmmii.c
	drivers/net/hyperv/netvsc.c
	kernel/bpf/hashtab.c

Almost entirely overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sound fixes from Takashi Iwai:
 "This contains the collection of small fixes for 4.11 that were pending
  during my vacation:

   - a few HD-audio quirks (more Dell headset support, docking station
     support on HP laptops)

   - a regression fix for the previous ctxfi DMA mask fix

   - a correction of the new CONFIG_SND_X86 menu entry

   - a fix for the races in ALSA sequencer core spotted by syzkaller"

* tag 'sound-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Adding a group of pin definition to fix headset problem
  ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()
  ALSA: x86: Make CONFIG_SND_X86 bool
  ALSA: hda - add support for docking station for HP 840 G3
  ALSA: hda - add support for docking station for HP 820 G2
  ALSA: ctxfi: Fix the incorrect check of dma_set_mask() call

gcc points out that we are converting a 16-bit integer into a 32-bit
little-endian type and assigning that to 16-bit little-endian
will end up with a zero:

drivers/scsi/qedf/drv_fcoe_fw_funcs.c: In function 'init_initiator_rw_fcoe_task':
include/uapi/linux/byteorder/big_endian.h:32:26: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
  t_st_ctx->read_write.rx_id = cpu_to_le32(FCOE_RX_ID);

The correct solution appears to be to just use a 16-bit byte swap instead.

Fixes: be086e7c ("qed*: Utilize Firmware 8.15.3.0")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yuval Mintz says:

====================
qed: Management interaction & feature changes

All patches in this series either affect direct interaction with the
management firmware, or changes logic relating to some values retrieved
from it.

Patch #1 revises the basic logic for sending messages to the management
firmware and there completion, and is the most significant [at least
code-wise] of the bunch.

Patch #2 changes infrastrcure in a way that should better protect us form
mistakes leading to stack corruption such as was fixed in
bb480242 ("qed: Prevent stack corruption on MFW interaction").

Patch #3 corrects some update API endian issue [sent here as it would
create conflicts with #2, and because it's lack would create a rather
insignifcant problem].

Patch #4 removes some unnecessary logging, allowing cleaner forward
compatibility with future management firmware versions.

Patches #5, #6 slightly change the number of possible L2 queues in some
scenarios, leading to the possibility of having more queues / VFS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Align the driver feature distribution with the flow utilized
by the management firmware - first reserve L2 queues for
VFs and use all the remaining for the PF.

The current distribution might lead to PFs with an enormous
amount of queues, but at the same time leave us with insufficient
resources for starting all VFs.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When RoCE is enabled on a given L2 interface, the interrupt lines
are divided equally between L2 and RoCE -
But in case number of lines needed for RoCE is limited by number
of available CNQs, we can utilize the additional lines for L2.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Management firmware and driver are meant to be both backward and forward
compatibile with each other.

If a new mangement firmware would work with an older driver,
it's possible that driver would receive indications which are meaningless
to it. That's perfectly acceptible from the firmware part - so no need to
log such messages at default verbosity; That would only serve to confuse
users.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The management firmware is running on a Big Endian processor,
and when running on LE platform HW is configured to swap access
to memory shared between management firmware and driver on
32-bit granulariy.

As a result, for matters of simplicity most of the APIs between
driver and management firmware are based on 32-bit variables.
MAC settings are one exception, as driver needs to fill a byte
array when indicating to management firmware that primary MAC
has changed.
Due to the swap, driver must make sure that the mac that was
provided in byte-order would be translated into native order,
otherwise after the swap the management firmware would read
it swapped.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver interaction with management firmware involves a union
of all the data-members relating to the commands the driver prepares.

Current interface assumes the caller always passes such a union -
but thats cumbersome as well as risky [chancing a stack corruption
in case caller accidentally passes a smaller member instead of union].

Change implementation so that caller could pass a pointer to any
of the members instead of the union.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Interaction of driver -> management firmware is based
on a one-pending mailbox [per interface], and various
mailbox commands need to be synchronized.

Current scheme is messy, and there's a difficulty extending
it as it deals differently with various commands as well as
making assumption on the required behavior for load/unload
requests.

Drop the current scheme into a completion-list-based approach;
Each flow would try sending the command when possible,
allowing one flow to complete another flow's completion and
relieve the mailbox before sending its own command.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull btrfs fixes from Chris Mason:
 "Zygo tracked down a very old bug with inline compressed extents.

  I didn't tag this one for stable because I want to do individual
  tested backports. It's a little tricky and I'd rather do some extra
  testing on it along the way"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: add missing memset while reading compressed inline extents
  Btrfs: fix regression in lock_delalloc_pages
  btrfs: remove btrfs_err_str function from uapi/linux/btrfs.h

Pull networking fixes from David Miller:

 1) Several netfilter fixes from Pablo and the crew:
      - Handle fragmented packets properly in netfilter conntrack, from
        Florian Westphal.
      - Fix SCTP ICMP packet handling, from Ying Xue.
      - Fix big-endian bug in nftables, from Liping Zhang.
      - Fix alignment of fake conntrack entry, from Steven Rostedt.

 2) Fix feature flags setting in fjes driver, from Taku Izumi.

 3) Openvswitch ipv6 tunnel source address not set properly, from Or
    Gerlitz.

 4) Fix jumbo MTU handling in amd-xgbe driver, from Thomas Lendacky.

 5) sk->sk_frag.page not released properly in some cases, from Eric
    Dumazet.

 6) Fix RTNL deadlocks in nl80211, from Johannes Berg.

 7) Fix erroneous RTNL lockdep splat in crypto, from Herbert Xu.

 8) Cure improper inflight handling during AF_UNIX GC, from Andrey
    Ulanov.

 9) sch_dsmark doesn't write to packet headers properly, from Eric
    Dumazet.

10) Fix SCM_TIMESTAMPING_OPT_STATS handling in TCP, from Soheil Hassas
    Yeganeh.

11) Add some IDs for Motorola qmi_wwan chips, from Tony Lindgren.

12) Fix nametbl deadlock in tipc, from Ying Xue.

13) GRO and LRO packets not counted correctly in mlx5 driver, from Gal
    Pressman.

14) Fix reset of internal PHYs in bcmgenet, from Doug Berger.

15) Fix hashmap allocation handling, from Alexei Starovoitov.

16) nl_fib_input() needs stronger netlink message length checking, from
    Eric Dumazet.

17) Fix double-free of sk->sk_filter during sock clone, from Daniel
    Borkmann.

18) Fix RX checksum offloading in aquantia driver, from Pavel Belous.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
  net:ethernet:aquantia: Fix for RX checksum offload.
  amd-xgbe: Fix the ECC-related bit position definitions
  sfc: cleanup a condition in efx_udp_tunnel_del()
  Bluetooth: btqcomsmd: fix compile-test dependency
  inet: frag: release spinlock before calling icmp_send()
  tcp: initialize icsk_ack.lrcvtime at session start time
  genetlink: fix counting regression on ctrl_dumpfamily()
  socket, bpf: fix sk_filter use after free in sk_clone_lock
  ipv4: provide stronger user input validation in nl_fib_input()
  bpf: fix hashmap extra_elems logic
  enic: update enic maintainers
  net: bcmgenet: remove bcmgenet_internal_phy_setup()
  ipv6: make sure to initialize sockc.tsflags before first use
  fjes: Do not load fjes driver if extended socket device is not power on.
  fjes: Do not load fjes driver if system does not have extended socket device.
  net/mlx5e: Count LRO packets correctly
  net/mlx5e: Count GSO packets correctly
  net/mlx5: Increase number of max QPs in default profile
  net/mlx5e: Avoid supporting udp tunnel port ndo for VF reps
  net/mlx5e: Use the proper UAPI values when offloading TC vlan actions
  ...

A new Dell laptop needs to apply ALC269_FIXUP_DELL1_MIC_NO_PRESENCE to
fix the headset problem, and the pin definiton of this machine is not
in the pin quirk table yet, now adding it to the table.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Since AQC-100/107/108 chips supports hardware checksums for RX we should indicate this
via NETIF_F_RXCSUM flag.

v1->v2: 'Signed-off-by' tag added.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ECC bit positions that describe whether the ECC interrupt is for
Tx, Rx or descriptor memory and whether the it is a single correctable
or double detected error were defined in incorrectly (reversed order).
Fix the bit position definitions for these settings so that the proper
ECC handling is performed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
netvsc: bug fixes and cleanups

These fix NAPI issues and bugs found during testing of shutdown
testing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix warning from unused set_complete variable. And rearrange code
to eliminate unnecessary goto's.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since there already is a special case goto for control messages (skb == NULL)
in netvsc_send, there is no need for later checks in same code path.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>