It's not intuitively obvious that bpfilter_umh is a statically linked binary.
Mention the toolchain requirement in the Kconfig help, so people
have an easier time figuring out what's needed.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

if objdump has below entries;
c01ed608 <X>:
c01ed614:       e24ddff7        sub     sp, sp, #120    ; 0x78

c01f0d50 <Y>:
c01f0d50:       e24dd094        sub     sp, sp, #140    ; 0x8c

scripts fails to read stack usage.
so making regex $re for ARM similar to aarch64
Co-developed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

To count stack usage of push {*, fp, ip, lr, pc} instruction in ARM,
if FRAME POINTER is enabled.
e.g. c01f0d48: e92ddff0 push {r4, r5, r6, r7, r8, r9, sl, fp, ip, lr, pc}

c01f0d50 <Y>:
c01f0d44:       e1a0c00d        mov     ip, sp
c01f0d48:       e92ddff0        push    {r4, r5, r6, r7, r8, r9, sl, fp, ip, lr, pc}
c01f0d4c:       e24cb004        sub     fp, ip, #4
c01f0d50:       e24dd094        sub     sp, sp, #448    ; 0x1C0

$ cat dump | scripts/checkstack.pl arm
0xc01f0d50 Y []:                                        448

added subroutine frame work for this.
After change:
0xc01f0d500 Y []:                                       492
Co-developed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Add arguments support to print stacks which are greater than
argument value only.
Co-developed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

currently script prints stack usage for functions
in two ways:($re and $dre)

dre breaks sorting mechanism.
0xffffa00011f26f88 sunxi_mux_clk_setup.isra.0 [vmlinux]:Dynamic (0x140)
..
0xffffa00011f27210 sunxi_divs_clk_setup [vmlinux]:      Dynamic (0x1d0)

so we can print it in decimal only.

Also address before function name is changed to function
start address rather than stack consumption address.
Because in next patch, arm has two ways to use stack
which can be clubbed and printed in one function only.

All symbols whose stack by adding(re and dre) is greater than
100, will be printed.

0xffffa00011f2720c0 sunxi_divs_clk_setup [vmlinux]:     464
...
0xffffa00011f26f840 sunxi_mux_clk_setup.isra.0 [vmlinux]:320
Co-developed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Misuse of CONFIG_* in UAPI headers should result in an error. These config
options can be set in userspace by the user application which includes
these headers to control the APIs and structures being used in a kernel
which supports multiple targets.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Merge {CLEAN,MRPROPER,DISTCLEAN}_DIRS into {CLEAN,MRPROPER,DISTCLEAN}_FILES
because the difference is just the -r option passed to the 'rm' command.

Do likewise as commit 1634f2bf ("kbuild: remove clean-dirs syntax").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This comment was added by commit ("kbuild: Restore build nr, improve
vmlinux link") [1].

It was talking about if_changed_rule at that time. Now, it is unclear
what to fix.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=ea52ca1b3e3882b499cc6c043f384958b88b62ffSigned-off-by: Masahiro Yamada <masahiroy@kernel.org>

If include/generated/autoconf.h is accidentally lost somehow,
there is no clear way to fix it. Make it self-healing.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Kbuild now supports the 'userprogs' syntax to compile userspace
programs for the same architecture as the kernel.

Add the entry to samples/Makefile to put this into the build bot
coverage.

I also added the CONFIG option guarded by 'depends on CC_CAN_LINK'
because $(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

Kbuild now supports the 'userprogs' syntax to compile userspace
programs for the same architecture as the kernel.

Add the entry to samples/Makefile to put this into the build bot
coverage.

I also added the CONFIG option guarded by 'depends on CC_CAN_LINK'
because $(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

Kbuild now supports the 'userprogs' syntax to compile userspace
programs for the same architecture as the kernel.

Add the entry to samples/Makefile to put this into the build bot
coverage.

I also added the CONFIG option guarded by 'depends on CC_CAN_LINK'
because $(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.

I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.

I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

These userspace programs include UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample programs should be built for
the target as well. Kbuild now supports 'userprogs' for that.

I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.

$(CC) can always compile cn_text.o since it is the kenrel-space code,
but building ucon requires libc.

I guarded it by:

  always-$(CONFIG_CC_CAN_LINK) := $(userprogs)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.

I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.

Add the entry to samples/Makefile to put this into the build bot
coverage.

I also added the CONFIG option guarded by 'depends on CC_CAN_LINK'
because $(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

Fix warnings seen when building for 32-bit architecture.

Use "%xd" for arguments of type size_t to fix the warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Kbuild now supports the syntax 'userprogs' to compile userspace
programs for the same architecture as the kernel.

Insert the section '5 Userspace Program support' to explain it.

I copy-pasted '4 Host Program support' and fixed it up.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

These userspace programs include UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample programs should be built for
the target as well. Kbuild now supports 'userprogs' for that.

I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.

The 'ifndef CROSS_COMPILE' is no longer needed.

BTW, the -m31 for s390 is left-over code. Commit 5a79859a ("s390:
remove 31 bit support") killed it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

The user mode helper should be compiled for the same architecture as
the kernel.

This Makefile reused the 'hostprogs' syntax by overriding HOSTCC with CC.
Use the new syntax 'userprogs' to fix the Makefile mess.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

Kbuild supports the infrastructure to build host programs, but there
was no support to build userspace programs for the target architecture
(i.e. the same architecture as the kernel).

Sam Ravnborg worked on this in 2014 (https://lkml.org/lkml/2014/7/13/154),
but it was not merged. One problem at that time was, there was no good way
to know whether $(CC) can link standalone programs. In fact, pre-built
kernel.org toolchains [1] are often used for building the kernel, but they
do not provide libc.

Now, we can handle this cleanly because the compiler capability is
evaluated at the Kconfig time. If $(CC) cannot link standalone programs,
the relevant options are hidden by 'depends on CC_CAN_LINK'.

The implementation just mimics scripts/Makefile.host

The userspace programs are compiled with the same flags as the host
programs. In addition, it uses -m32 or -m64 if it is found in
$(KBUILD_CFLAGS).

This new syntax has two usecases.

- Sample programs

  Several userspace programs under samples/ include UAPI headers
  installed in usr/include. Most of them were previously built for
  the host architecture just to use the 'hostprogs' syntax.

  However, 'make headers' always works for the target architecture.
  This caused the arch mismatch in cross-compiling. To fix this
  distortion, sample code should be built for the target architecture.

- Bpfilter

  net/bpfilter/Makefile compiles bpfilter_umh as the user mode helper,
  and embeds it into the kernel. Currently, it overrides HOSTCC with
  CC to use the 'hostprogs' syntax. This hack should go away.

[1]: https://mirrors.edge.kernel.org/pub/tools/crosstool/Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

On Fedora, linking static glibc requires the glibc-static RPM package,
which is not part of the glibc-devel package.

CONFIG_CC_CAN_LINK does not check the capability of static linking,
so you can enable CONFIG_BPFILTER_UMH, then fail to build:

    HOSTLD  net/bpfilter/bpfilter_umh
  /usr/bin/ld: cannot find -lc
  collect2: error: ld returned 1 exit status

Add CONFIG_CC_CAN_LINK_STATIC, and make CONFIG_BPFILTER_UMH depend
on it.
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpfilter_umh is built for the default machine bit of the compiler,
which may not match to the bit size of the kernel.

This happens in the scenario below:

You can use biarch GCC that defaults to 64-bit for building the 32-bit
kernel. In this case, Kbuild passes -m32 to teach the compiler to
produce 32-bit kernel space objects. However, it is missing when
building bpfilter_umh. It is built as a 64-bit ELF, and then embedded
into the 32-bit kernel.

The 32-bit kernel and 64-bit umh is a bad combination.

In theory, we can have 32-bit umh running on 64-bit kernel, but we do
not have a good reason to support such a usecase.

The best is to match the bit size between them.

Pass -m32 or -m64 to the umh build command if it is found in
$(KBUILD_CFLAGS). Evaluate CC_CAN_LINK against the kernel bit-size.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

always, hostprogs-y, and hostprogs-m are deprecated.

There is no user in upstream code, but I will keep them for external
modules. I want to remove them entirely someday. Prompt downstream
users for the migration.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

cmd_dtc takes the additional parameter $(2) to select the target
format, dtb or yaml. This makes things complicated when it is used
with cmd_and_fixdep and if_changed_rule. I actually stumbled on this.
See commit 3d4b2238 ("kbuild: fix DT binding schema rule again to
avoid needless rebuilds").

Extract the suffix part of the target instead of passing the parameter.
Fortunately, this works for both $(obj)/%.dtb and $(obj)/%.dt.yaml .
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

$(AS) is not used anywhere in the kernel build, hence commit
aa824e0c ("kbuild: remove AS variable") killed it.

Remove the left-over code in arch/{arm,arm64}/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Will Deacon <will@kernel.org>

This notice has been here for a while. Remove it entirely now.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This reverts commit 87284978.

samples/ contains only sub-directories.

Because OBJECT_FILES_NON_STANDARD does not work recursively,
this line has no effect.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

scripts/mkcompile_h runs $(CC) just for getting the version string.
Reuse CONFIG_CC_VERSION_TEXT for optimization.

For GCC, this slightly changes the version string. I do not think it
is a big deal as we do not have the defined format for LINUX_COMPILER.
In fact, the recent commit 4dcc9a88 ("kbuild: mkcompile_h:
Include $LD version in /proc/version") added the linker version.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This omits system headers from the generated header dependency.

System headers are not updated unless you upgrade the compiler. Nor do
they contain CONFIG options, so fixdep does not need to parse them.

Having said that, the effect of this optimization will be quite small
because the kernel code generally does not include system headers
except <stdarg.h>. Host programs include a lot of system headers,
but there are not so many in the kernel tree.

At first, keeping system headers in .*.cmd files might be useful to
detect the compiler update, but there is no guarantee that <stdarg.h>
is included from every file. So, I implemented a more reliable way in
the previous commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit 21c54b77 ("kconfig: show compiler version text in the top
comment") added the environment variable, CC_VERSION_TEXT in the comment
of the top Kconfig file. It can detect the compiler update, and invoke
the syncconfig because all environment variables referenced in Kconfig
files are recorded in include/config/auto.conf.cmd

This commit makes it a CONFIG option in order to ensure the full rebuild
when the compiler is updated.

This works like follows:

include/config/kconfig.h contains "CONFIG_CC_VERSION_TEXT" in the comment
block.

The top Makefile specifies "-include $(srctree)/include/linux/kconfig.h"
to guarantee it is included from all kernel source files.

fixdep parses every source file and all headers included from it,
searching for words prefixed with "CONFIG_". Then, fixdep finds
CONFIG_CC_VERSION_TEXT in include/config/kconfig.h and adds
include/config/cc/version/text.h into every .*.cmd file.

When the compiler is updated, syncconfig is invoked because init/Kconfig
contains the reference to the environment variable CC_VERTION_TEXT.
CONFIG_CC_VERSION_TEXT is updated to the new version string, and
include/config/cc/version/text.h is touched.

In the next rebuild, Make will rebuild every files since the timestamp
of include/config/cc/version/text.h is newer than that of target.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The result of '$(CC) --version | head -n 1' has already been computed
by the top Makefile, and stored in the environment variable,
CC_VERSION_TEXT.

'echo' is cheaper than the two commands $(CC) and 'head' although this
optimization is not noticeable level.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>

Since commit a83e4ca2 ("kbuild: remove cc-option switch from
-Wframe-larger-than="), 'make ARCH=unicore32 clean' emits error
messages as follows:

  $ make ARCH=unicore32 clean
  gcc: error: missing argument to '-Wframe-larger-than='
  gcc: error: missing argument to '-Wframe-larger-than='

We do not care compiler flags when cleaning.

Use the '=' operator for lazy expansion because we do not use
GNU_LIBC_A or GNU_LIBGCC_A when cleaning.

Fixes: a83e4ca2 ("kbuild: remove cc-option switch from -Wframe-larger-than=")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

'make ARCH=h8300 clean' emits error messages as follows:

  $ make ARCH=h8300 clean
  gcc: error: missing argument to '-Wframe-larger-than='
  gcc: error: unrecognized command line option '-mint32'

You can suppress the second one by setting the correct CROSS_COMPILE=,
but we should not require any compiler for cleaning.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

'make ARCH=hexagon clean' emits an error message as follows:

  $ make ARCH=hexagon clean
  gcc: error: unrecognized command line option '-G0'

You can suppress it by setting the correct CROSS_COMPILE=,
but we should not require any compiler for cleaning.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>

Since commit a83e4ca2 ("kbuild: remove cc-option switch from
-Wframe-larger-than="), 'make ARCH=um clean' emits an error message
as follows:

  $ make ARCH=um clean
  gcc: error: missing argument to '-Wframe-larger-than='

We do not care compiler flags when cleaning.

Use the '=' operator for lazy expansion because we do not use
LDFLAGS_pcap.o or LDFLAGS_vde.o when cleaning.

While I was here, I removed the redundant -r option because it
already exists in the recipe.

Fixes: a83e4ca2 ("kbuild: remove cc-option switch from -Wframe-larger-than=")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> [build]