- 07 May, 2007 18 commits
-
-
Grant Likely authored
If the serial port gets shut down, then console output stalls. 9 out of 10 kernel hackers agree, this is a bad thing. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Sylvain Munaut <tnt@246tNt.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Domen Puncer authored
Device type should be "soc" (as in lite5200.dts), compatible is already set to "mpc5200". Signed-off-by:
Domen Puncer <domen.puncer@telargo.com> Signed-off-by:
-
Domen Puncer authored
Add fsl-i2c to mpc5200 i2c node in device tree, and enable FSL_SOC. Tested to work with built-in eeprom on lite5200b. Signed-off-by:
-
Domen Puncer authored
Three trivial DTS fixes: -Mark Lite5200(b) boards as "mpc5200" compatible. On efika the firmware already does that. -Fix mscan interrupt. -Fix wakeup GPIO address. Signed-off-by:
-
Sylvain Munaut authored
There is now a common function to generate the modalias string, so use it. We just need to add the \n at the end. Signed-off-by:
-
Sylvain Munaut authored
Apparently other parts of the kernel need to know the modalias internally (like the sysfs code in macintosh driver). To avoid consistency issues, we export this code and use it everywhere it's needed rather than repeat it ... Signed-off-by:
-
David Gibson authored
This patch fixes a couple of missing dependencies in arch/powerpc/boot/Makefile. First, it ensures that the zlib.h header is linked in before attempting to build gunzip_util.o, as it is, building gunzip_util.o usually works, but not always depending on make order. Second, it makes the final images which are built using a dts dependent on that dts, so the image will be correctly rebuilt if the dts changes. This in turn requires fixing the definition of the dts variable. CONFIG_DEVICE_TREE from Kconfig will have quotes around it, which don't matter when passing the variable to a shell, but which need to be removed when incorporating it into a filename for make's use. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
David Gibson authored
32-bit powerpc uses a PTE_FMT macro to handle printk() formatting of PTE entries (which can vary in type and size). Apparently there was a good reason for it once, but with current compilers it's simpler just to workaround the variation with a cast in the printk() itself (there's only one use). Signed-off-by:
-
Olof Johansson authored
Update the global cpu speed variable according to current cpufreq speed, /proc/cpuinfo reports the actual speed. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Johannes Berg authored
Powermac G5 suspend to disk implementation. The code is platform agnostic but only tested on powermac, no other 64-bit powerpc machines. Because nvidiafb still breaks suspend I have marked it EXPERIMENTAL on powermac and because I can't test it and some lowlevel code will need changes it is BROKEN on all other 64-bit platforms. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Johannes Berg authored
This implements save and restore hooks for IOMMUs and implements it the DART iommu. Signed-off-by:
-
Stephen Rothwell authored
for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Johannes Berg authored
This allows "hotplugging" of CPUs on G5 machines. CPUs that are disabled are put into an idle loop with the decrementer frequency set to minimum. To wake them up again we kick them just like when bringing them up. To stop those CPUs from messing with any global state we stop them from entering the timer interrupt. Signed-off-by:
-
Scott Wood authored
This allows the zImage target to once again be used to build all supported image types, rather than requiring an explicit "make uImage" to avoid failing to create an unneeded cuImage. Signed-off-by:
Scott Wood <scottwood@freescale.com> Acked-by:
-
will schmidt authored
Add a new function named smp_call_function_single(). This matches a generic prototype from include/linux/smp.h. Add a function smp_call_function_map(). This is, for the most part, a rename of smp_call_function, with some added cpumask support. smp_call_function and smp_call_function_single call into smp_call_function_map. Lightly tested on 970mp (blade), power4 and power5. Signed-off-by:
Will Schmidt <will_schmidt@vnet.ibm.com> cc: Anton Blanchard <anton@samba.org> Signed-off-by:
-
Kevin Corry authored
Change the powerpc version of topology_init() from an __initcall to a subsys_initcall to match all other architectures. Signed-off-by:
Kevin Corry <kevcorry@us.ibm.com> Signed-off-by:
-
Johannes Berg authored
This adds mpic to the system devices and implements suspend and resume for them. This is necessary to get interrupts for modules back to where they were before a suspend to disk. Signed-off-by:
-
Luke Browning authored
This fixes a couple of kexec problems related to 64K page support in the kernel. kexec issues a tlbie for each pte. The parameters for the tlbie are the page size and the virtual address. Support was missing for the computation of these two parameters for 64K pages. This adds that support. Signed-off-by:
Luke Browning <lukebrowning@us.ibm.com> Acked-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by:
-
- 02 May, 2007 22 commits
-
-
Christoph Hellwig authored
Call the kprobes pagefault handler directly instead of going through the complex notifier chain. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Srinivasa Ds authored
When data symbols are not present in kernel image, user needs to add dot(".") before function name explicitly, that he wants to probe in kprobe module on ppc64. for ex:- When data symbols are missing on ppc64, ==================== [root@llm27lp1 ~]# cat /proc/kallsyms | grep do_fork c00000000006283c T .do_fork ============================== User needs add "." to "do_fork" kp.symbol_name = ".do_fork"; ============================ This makes kprobe modules unportable. This fixes the problem. Signed-off-by:Srinivasa Ds <srinivasa@in.ibm.com> Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Scott Wood authored
Change 3927f2e8 moved lib/lib64.c from lib-y to obj-y, preventing the export in ppc_ksyms.c from overriding the one in lib, and thus causing a duplicate-export warning. Signed-off-by:
-
Olof Johansson authored
Only publish of_platform devices if running on a machine that has them. Signed-off-by:
-
Stephen Rothwell authored
These are all the remaining instances of get_property. Simple rename of get_property to of_get_property. Signed-off-by:
-
Stephen Rothwell authored
This is the last place that needs changing since get_property was changed to return "const void *". Signed-off-by:
-
David Gibson authored
This patch makes a few small cleanups to the cuboot code. - It removes the double layered selection of images, via cuboot-plat-y, instead having the cuboot platforms directly select a suitable image-y (this changes the name of the final cuboot image from plain cuImage to cuImage.<platform>). - Factors out some code in the wrapper that's potentially useful to platforms other than uboot. Signed-off-by:
-
Geoff Levand authored
Updates to ps3_defconfig for linux-2.6.21. Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
Takao Shinohara authored
The PS3 HV will deliver soft-disabled interrupts at the next HV call or interrupt. Add an HV call to local_irq_restore() to force the timely delivery of any pending interrupts. This fixes the system slowdown bug reported here http://bugzilla.kernel.org/show_bug.cgi?id=8260Signed-off-by:
-
Geoff Levand authored
Fixups for the ps3 interrupt routines to support all HV device in a generic way. Signed-off-by:
-
Geoff Levand authored
A minor change to remove a duplicate variable assignement in ps3_mm_shutdown(); Signed-off-by:
-
Geoff Levand authored
Add PS3 support for the PowerPC processor's Data Address Breakpoint Register (DABR). Signed-off-by:
-
Josh Boyer authored
The weird TSI 10x MPIC needs an EOI after getting a spurious vector. This patch uses the existing MPIC_SPV_EOI flag to fix this issue. Signed-off-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by:
-
Jan Engelhardt authored
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Johannes Berg authored
In commit 0fba3a1f (a very long time ago, May 2006), I fixed a bug that caused powermacs to crash when you tried entering standby/mem suspend states. As I'm now getting more familiar with the suspend code I notice a few more things: 1. we previously misunderstood what pm_ops is for, it isn't supposed to be for doing platform dependent suspend/resume stuff that needs to be done for suspend to disk (as we currently try to use it!), it is instead for entering platform dependent suspend states ("standby", "mem"). 2. due to the first point, we never properly save FPU and altivec states when suspending to disk. It probably hasn't hurt yet because the process that writes the "disk" to /sys/power/state uses neither and its context is used. This patch addresses these points as follows: 1. remove all pm_ops from powermac, powermac suspend to ram isn't currently usable via /sys/power/state but is done via the PMU instead. 2. move the code responsible for storing FPU/altivec state into save_processor_state and the set_context() call to restore_processor_state. 3. add a call to kernel_enable_spe() It may look like there is some code removal missing but that is actually because the new suspend.h file overrides the ppc/suspend.h one which was previously used. Signed-off-by:
-
David Gibson authored
Currently, all 32-bit powerpc platforms use asm-ppc/pgtable.h and asm-ppc/pgalloc.h, even when otherwise compiled with ARCH=powerpc. Those asm-ppc files are a fairly nasty tangle of #ifdefs including a bunch of things which shouldn't be necessary any more in arch/powerpc. Cleaning up that mess is going to take a while, but this patch is a first step. It separates the asm-powerpc/pg{alloc,table}.h into 64 bit and 32 bit versions in asm-powerpc, which the basic .h files in asm-powerpc select based on config. We make a few tiny tweaks to the innards of the files along the way, making the outermost ifdefs (double-inclusion protection and __KERNEL__) a little cleaner, and #including asm-generic/pgtable.h from the top-level asm-powerpc/pgtable.h (since both the old 32-bit and 64-bit versions ended with such an #include). Signed-off-by: -
David Gibson authored
Since we don't have it active by default, the STRICT_MM_TYPECHECKS option has bitrotted again. This patch fixes a couple of simple build fixes if the option is selected. First, pud_t mustn't be defined in page.h on 32-bit systems, because it conflicts with the version in the generic pud-folding code. Second, pci_32.c is missing a __pgprot() wrapper call. Third, a couple of PS3 files use constants of type pgprot_t when they need the raw values, we add pgprot_val() calls to fix this. Signed-off-by:
-
David Gibson authored
This patch takes the definitions for the PPC44x MMU (a software loaded TLB) from asm-ppc/mmu.h, cleans them up of things no longer necessary in arch/powerpc and puts them in a new asm-powerpc/mmu_44x.h file. It also substantially simplifies arch/powerpc/mm/44x_mmu.c and makes a couple of small fixes necessary for the 44x MMU code to build and work properly in arch/powerpc. Signed-off-by:
-
Christian Krafft authored
There is no big reason to have that function inlined. Signed-off-by:
Christian Krafft <krafft@de.ibm.com> Acked-by:
-
Michael Ellerman authored
Fixes: BUG: spinlock bad magic on CPU#0, swapper/0 lock: c00000000064ec30, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 Call Trace: [c00000000062b980] [c00000000000f920] .show_stack+0x6c/0x1a0 (unreliable) [c00000000062ba20] [c0000000001c2b40] .spin_bug+0xb0/0xd4 [c00000000062bab0] [c0000000001c2ed0] ._raw_spin_lock+0x44/0x184 [c00000000062bb50] [c0000000003a42b4] ._spin_lock+0x10/0x24 [c00000000062bbd0] [c00000000002b4dc] .kernel_map_pages+0x198/0x278 [c00000000062bc90] [c000000000079720] .free_hot_cold_page+0x124/0x418 [c00000000062bd70] [c000000000530278] .free_all_bootmem_core+0x14c/0x224 [c00000000062be50] [c00000000052a178] .mem_init+0x68/0x170 [c00000000062bee0] [c00000000051d874] .start_kernel+0x2a0/0x37c [c00000000062bf90] [c0000000000084c8] .start_here_common+0x54/0x8c Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Kim Phillips authored
Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
Kim Phillips authored
Add 'mdio' to bus scan id list for platforms with QE UEC as a consequence of converting UEC mdio driver to an of_platform driver in the ucc_geth phylib conversion patch. Signed-off-by:
-
