Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Pass the page + offset to the low-level __iommu_map_single helper
(which gets renamed to fit the new calling conventions) as both
callers have the page at hand.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.

Note that the existing code used AMD_IOMMU_MAPPING_ERROR to check from
a 0 return from the IOVA allocator, which is replaced with an explicit
0 as in the implementation and other users of that interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of the magic bad_dma_addr on a dma
mapping failure and let the core dma-mapping code handle the rest.

Remove the magic EMERGENCY_PAGES that the bad_dma_addr gets redirected to.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of the magic bad_dma_addr on a dma
mapping failure and let the core dma-mapping code handle the rest.

Remove the magic EMERGENCY_PAGES that the bad_dma_addr gets redirected to.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the odd sba_{un,}map_single_attrs wrappers, check errors
everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Just return DMA_MAPPING_ERROR from __dummy_map_page and let the core
dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

The SBA iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

The CCIO iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Sparc already returns (~(dma_addr_t)0x0) on mapping failures, so we can
switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping
code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

S390 already returns (~(dma_addr_t)0x0) on mapping failures, so we can
switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping
code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

The Jazz iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and
let the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

The powerpc iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Arm already returns (~(dma_addr_t)0x0) on mapping failures, so we can
switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping
code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

The dma-direct code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Error handling of the dma_map_single and dma_map_page APIs is a little
problematic at the moment, in that we use different encodings in the
returned dma_addr_t to indicate an error.  That means we require an
additional indirect call to figure out if a dma mapping call returned
an error, and a lot of boilerplate code to implement these semantics.

Instead return the maximum addressable value as the error.  As long
as we don't allow mapping single-byte ranges with single-byte alignment
this value can never be a valid return.  Additionaly if drivers do
not check the return value from the dma_map* routines this values means
they will generally not be pointed to actual memory.

Once the default value is added here we can start removing the
various mapping_error methods and just rely on this generic check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit bfd56cd6 ("dma-mapping: support highmem in the generic remap
allocator") replaced dma_direct_alloc_pages() with __dma_direct_alloc_pages(),
which doesn't set dma_handle and zero allocated memory. Fix it by doing this
directly in the caller function.

Fixes: bfd56cd6 ("dma-mapping: support highmem in the generic remap allocator")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The csky code was largely copied from arm/arm64, so switch to the
generic arm64-based implementation instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guo Ren <ren_guo@c-sky.com>

csky does not implement ZONE_DMA, which means passing GFP_DMA is a no-op.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guo Ren <ren_guo@c-sky.com>

This option is gone past Linux 4.19.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guo Ren <ren_guo@c-sky.com>

Do not waste vmalloc space on allocations that do not require a mapping
into the kernel address space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

By using __dma_direct_alloc_pages we can deal entirely with struct page
instead of having to derive a kernel virtual address.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

The arm64 codebase to implement coherent dma allocation for architectures
with non-coherent DMA is a good start for a generic implementation, given
that is uses the generic remap helpers, provides the atomic pool for
allocations that can't sleep and still is realtively simple and well
tested.  Move it to kernel/dma and allow architectures to opt into it
using a config symbol.  Architectures just need to provide a new
arch_dma_prep_coherent helper to writeback an invalidate the caches
for any memory that gets remapped for uncached access.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

The dma remap code only makes sense for not cache coherent architectures
(or possibly the corner case of highmem CMA allocations) and currently
is only used by arm, arm64, csky and xtensa.  Split it out into a
separate file with a separate Kconfig symbol, which gets the right
copyright notice given that this code was written by Laura Abbott
working for Code Aurora at that point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

dma_alloc_from_contiguous can return highmem pages depending on the
setup, which a plain non-remapping DMA allocator can't handle.  Detect
this case and fail the allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

Some architectures support remapping highmem into DMA coherent
allocations.  To use the common code for them we need variants of
dma_direct_{alloc,free}_pages that do not use kernel virtual addresses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

The function dma_set_max_seg_size() can return either 0 on success or
-EIO on error. Change its return type from unsigned int to int to
capture this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The numa_slit variable used by node_distance is available to a
module as long as it is linked at compile-time. However, it is
not available to loadable modules. Leading to errors such as:

  ERROR: "numa_slit" [drivers/nvme/host/nvme-core.ko] undefined!

The error above is caused by the nvme multipath code that makes
use of node_distance for its path calculation. When the patch was
added, the lightnvm subsystem would select nvme and always compile
it in, leading to the node_distance call to always succeed.
However, when this requirement was removed, nvme could be compiled
in as a module, which exposed this bug.

This patch extracts node_distance to a function and exports it.
Since ACPI is depending on node_distance being a simple lookup to
numa_slit, the previous behavior is exposed as slit_distance and its
users updated.

Fixes: f3334447 "nvme: take node locality into account when selecting a path"
Fixes: 73569e11 "lightnvm: remove dependencies on BLK_DEV_NVME and PCI"
Signed-off-by: Matias Bjøring <mb@lightnvm.io>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'hwmon-for-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - fix temp4_type attribute permissions in w83795 driver

 - fix tacho fault detection in mlxreg-fan driver

 - fix current value calculations in ina2xx driver

 - fix initial notification/warning in raspberrypi driver

 - fix a NULL pointer access in ina2xx

* tag 'hwmon-for-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83795) temp4_type has writable permission
  hwmon: (mlxreg-fan) Fix macros for tacho fault reading
  hwmon: (ina2xx) Fix current value calculation
  hwmon: (raspberrypi) Fix initial notify
  hwmon (ina2xx) Fix NULL id pointer in probe()

Pull dma-mapping fixes from Christoph Hellwig:
 "Two dma-direct / swiotlb regressions fixes:

   - zero is a valid physical address on some arm boards, we can't use
     it as the error value

   - don't try to cache flush the error return value (no matter what it
     is)"

* tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: Skip cache maintenance on map error
  dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB

Pull NFS client bugfixes from Trond Myklebust:

 - Fix a NFSv4 state manager deadlock when returning a delegation

 - NFSv4.2 copy do not allocate memory under the lock

 - flexfiles: Use the correct stateid for IO in the tightly coupled case

* tag 'nfs-for-4.20-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  flexfiles: use per-mirror specified stateid for IO
  NFSv4.2 copy do not allocate memory under the lock
  NFSv4: Fix a NFSv4 state manager deadlock

I'm taking over the maintainance of Sparse so add myself as
maintainer and move Christopher's info to CREDITS.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull XArray updates from Matthew Wilcox:
 "We found some bugs in the DAX conversion to XArray (and one bug which
  predated the XArray conversion). There were a couple of bugs in some
  of the higher-level functions, which aren't actually being called in
  today's kernel, but surfaced as a result of converting existing radix
  tree & IDR users over to the XArray.

  Some of the other changes to how the higher-level APIs work were also
  motivated by converting various users; again, they're not in use in
  today's kernel, so changing them has a low probability of introducing
  a bug.

  Dan can still trigger a bug in the DAX code with hot-offline/online,
  and we're working on tracking that down"

* tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax:
  XArray tests: Add missing locking
  dax: Avoid losing wakeup in dax_lock_mapping_entry
  dax: Fix huge page faults
  dax: Fix dax_unlock_mapping_entry for PMD pages
  dax: Reinstate RCU protection of inode
  dax: Make sure the unlocking entry isn't locked
  dax: Remove optimisation from dax_lock_mapping_entry
  XArray tests: Correct some 64-bit assumptions
  XArray: Correct xa_store_range
  XArray: Fix Documentation
  XArray: Handle NULL pointers differently for allocation
  XArray: Unify xa_store and __xa_store
  XArray: Add xa_store_bh() and xa_store_irq()
  XArray: Turn xa_erase into an exported function
  XArray: Unify xa_cmpxchg and __xa_cmpxchg
  XArray: Regularise xa_reserve
  nilfs2: Use xa_erase_irq
  XArray: Export __xa_foo to non-GPL modules
  XArray: Fix xa_for_each with a single element at 0

Pull HID fixes from Jiri Kosina:

 - revert of the high-resolution scrolling feature, as it breaks certain
   hardware due to incompatibilities between Logitech and Microsoft
   worlds. Peter Hutterer is working on a fixed implementation. Until
   that is finished, revert by Benjamin Tissoires.

 - revert of incorrect strncpy->strlcpy conversion in uhid, from David
   Herrmann

 - fix for buggy sendfile() implementation on uhid device node, from
   Eric Biggers

 - a few assorted device-ID specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  Revert "Input: Add the `REL_WHEEL_HI_RES` event code"
  Revert "HID: input: Create a utility class for counting scroll events"
  Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration""
  Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice"
  Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice"
  Revert "HID: logitech: fix a used uninitialized GCC warning"
  Revert "HID: input: simplify/fix high-res scroll event handling"
  HID: Add quirk for Primax PIXART OEM mice
  HID: i2c-hid: Disable runtime PM for LG touchscreen
  HID: multitouch: Add pointstick support for Cirque Touchpad
  HID: steam: remove input device when a hid client is running.
  Revert "HID: uhid: use strlcpy() instead of strncpy()"
  HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges
  HID: input: Ignore battery reported by Symbol DS4308
  HID: Add quirk for Microsoft PIXART OEM mouse