- 25 Oct, 2017 10 commits
-
-
David S. Miller authored
Xin Long says: ==================== net: remove rtmsg_ifinfo used in bridge and bonding It's better to send notifications to userspace by the events in rtnetlink_event, instead of calling rtmsg_ifinfo directly. This patcheset is to remove rtmsg_ifinfo called in bonding and bridge, the notifications can be handled by NETDEV_CHANGEUPPER and NETDEV_CHANGELOWERSTATE events in rtnetlink_event. It could also fix some redundant notifications from bonding and bridge. v1->v2: - post to net-next.git instead of net.git, for it's more like an improvement for bonding v2->v3: - add patch 1/4 to remove rtmsg_ifinfo called in add_del_if ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Xin Long authored
After the patch 'rtnetlink: bring NETDEV_CHANGELOWERSTATE event process back to rtnetlink_event', bond_lower_state_changed would generate NETDEV_CHANGEUPPER event which would send a notification to userspace in rtnetlink_event. There's no need to call rtmsg_ifinfo to send the notification any more. So this patch is to remove it from these places after bond_lower_state_changed. Besides, after this, rtmsg_ifinfo is not needed to be exported. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to bring NETDEV_CHANGELOWERSTATE event process back to rtnetlink_event so that bonding could use it instead of calling rtmsg_ifinfo to send a notification to userspace after netdev lower state is changed in the later patch. Signed-off-by:
-
Xin Long authored
Since commit 42e52bf9 ("net: add netnotifier event for upper device change"), netdev_master_upper_dev_link has generated NETDEV_CHANGEUPPER event which would send a notification to userspace in rtnetlink_event. There's no need to call rtmsg_ifinfo to send the notification any more. So this patch is to remove it from bond_master_upper_dev_link as well as bond_upper_dev_unlink to avoid the redundant notifications. Signed-off-by:
-
Xin Long authored
Since commit dc709f37 ("rtnetlink: bring NETDEV_CHANGEUPPER event process back in rtnetlink_event"), rtnetlink_event would process the NETDEV_CHANGEUPPER event and send a notification to userspace. In add_del_if, it would generate NETDEV_CHANGEUPPER event by whether netdev_master_upper_dev_link or netdev_upper_dev_unlink. There's no need to call rtmsg_ifinfo to send the notification any more. So this patch is to remove it from add_del_if also to avoid redundant notifications. Signed-off-by:
-
David S. Miller authored
Yonghong Song says: ==================== bpf: permit multiple bpf attachments for a single perf tracepoint event This patch set adds support to permit multiple bpf prog attachments for a single perf tracepoint event. Patch 1 does some cleanup such that perf_event_{set|free}_bpf_handler is called under the same condition. Patch 2 has the core implementation, and Patch 3 adds a test case. Changelogs: v2 -> v3: . fix compilation error. v1 -> v2: . fix a potential deadlock issue discovered by Daniel. . fix some coding style issues. ==================== Signed-off-by: -
Yonghong Song authored
The bpf sample program syscall_tp is modified to show attachment of more than bpf programs for a particular kernel tracepoint. Signed-off-by:
Yonghong Song <yhs@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Yonghong Song authored
This patch enables multiple bpf attachments for a kprobe/uprobe/tracepoint single trace event. Each trace_event keeps a list of attached perf events. When an event happens, all attached bpf programs will be executed based on the order of attachment. A global bpf_event_mutex lock is introduced to protect prog_array attaching and detaching. An alternative will be introduce a mutex lock in every trace_event_call structure, but it takes a lot of extra memory. So a global bpf_event_mutex lock is a good compromise. The bpf prog detachment involves allocation of memory. If the allocation fails, a dummy do-nothing program will replace to-be-detached program in-place. Signed-off-by:
-
Yonghong Song authored
This is a cleanup such that doing the same check in perf_event_free_bpf_prog as we already do in perf_event_set_bpf_prog step. Signed-off-by:
-
Shmulik Ladkani authored
Currently, ip6_tnl_xmit_ctl drops tunneled packets if the remote address (outer v6 destination) is one of host's locally configured addresses. Same applies to ip6_tnl_rcv_ctl: it drops packets if the remote address (outer v6 source) is a local address. This prevents using ipxip6 (and ip6_gre) tunnels whose local/remote endpoints are on same host; OTOH v4 tunnels (ipip or gre) allow such configurations. An example where this proves useful is a system where entities are identified by their unique v6 addresses, and use tunnels to encapsulate traffic between them. The limitation prevents placing several entities on same host. Introduce IP6_TNL_F_ALLOW_LOCAL_REMOTE which allows to bypass this restriction. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
-
- 24 Oct, 2017 30 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Various fixes Yotam says: Cleanup some issues reported by sparse. ==================== Signed-off-by: -
Yotam Gigi authored
Make the spectrum_mr_tcam.c include the spectrum_mr_tcam.h header file. Cleans up sparse warning: symbol 'mlxsw_sp_mr_tcam_ops' was not declared. Should it be static? Fixes: 0e14c777 ("mlxsw: spectrum: Add the multicast routing hardware logic") Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Yotam Gigi authored
The function is only used internally in spectrum_mr.c and is not declared in the header file, thus make it static. Cleans up sparse warning: symbol 'mlxsw_sp_mr_dev_vif_lookup' was not declared. Should it be static? Fixes: c011ec1b ("mlxsw: spectrum: Add the multicast routing offloading logic") Signed-off-by:
-
Yotam Gigi authored
Fix various endianness issues in comparisons and assignments. The fix is entirely cosmetic as all the values fixed are endianness-agnostic. Cleans up sparse warnings: spectrum_mr.c:156:49: warning: restricted __be32 degrades to integer spectrum_mr.c:206:26: warning: restricted __be32 degrades to integer spectrum_mr.c:212:31: warning: incorrect type in assignment (different base types) spectrum_mr.c:212:31: expected restricted __be32 [usertype] addr4 spectrum_mr.c:212:31: got unsigned int spectrum_mr.c:214:32: warning: incorrect type in assignment (different base types) spectrum_mr.c:214:32: expected restricted __be32 [usertype] addr4 spectrum_mr.c:214:32: got unsigned int spectrum_mr.c:461:16: warning: restricted __be32 degrades to integer spectrum_mr.c:461:49: warning: restricted __be32 degrades to integer Fixes: c011ec1b ("mlxsw: spectrum: Add the multicast routing offloading logic") Signed-off-by:
-
Arkadi Sharshevsky authored
During the dump the per netlink packet entry counter should be zeroed out when new packet is created. Fixes: 190d38a5 ("mlxsw: spectrum_dpipe: Add support for adjacency table dump") Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Or Gerlitz authored
Prior to commit b3f55bdd, the networking core doesn't wire an in-place actions list the when the low level driver is called to offload the flow, but all low level drivers do that (call tcf_exts_to_list()) in their offloading "add" logic. Now, the in-place list is set in the core which goes over the list in a loop, but also by the hw driver when their offloading code is invoked indirectly: cls_xxx add flow -> tc_setup_cb_call -> tc_exts_setup_cb_egdev_call -> hw driver which messes up the core list instance upon driver return. Fix that by avoiding in-place list on the net core code that deals with adding flows. Fixes: b3f55bdd ('net: sched: introduce per-egress action device callbacks') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
-
Veerasenareddy Burru authored
Pass date and time information to NIC at the time of loading firmware and periodically update the host time to NIC firmware. This is to make NIC firmware use the same time reference as Host, so that it is easy to correlate logs from firmware and host for debugging. Signed-off-by:
Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Wei Wang authored
In rt6_select(), fn->leaf could be pointing to net->ipv6.ip6_null_entry. In this case, we should directly return instead of trying to carry on with the rest of the process. If not, we could crash at: spin_lock_bh(&leaf->rt6i_table->rt6_lock); because net->ipv6.ip6_null_entry does not have rt6i_table set. Syzkaller recently reported following issue on net-next: Use struct sctp_sack_info instead kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: sctp: [Deprecated]: syz-executor4 (pid 26496) Use of struct sctp_assoc_value in delayed_ack socket option. Use struct sctp_sack_info instead CPU: 1 PID: 26523 Comm: syz-executor6 Not tainted 4.14.0-rc4+ #85 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d147e3c0 task.stack: ffff8801a4328000 RIP: 0010:debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] RIP: 0010:do_raw_spin_lock+0x23/0x1e0 kernel/locking/spinlock_debug.c:112 RSP: 0018:ffff8801a432ed70 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 000000000000001c RBP: ffff8801a432ed90 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff8482b279 R12: ffff8801ce2ff3a0 sctp: [Deprecated]: syz-executor1 (pid 26546) Use of int in maxseg socket option. Use struct sctp_assoc_value instead R13: dffffc0000000000 R14: ffff8801d971e000 R15: ffff8801ce2ff0d8 FS: 00007f56e82f5700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001ddbc22000 CR3: 00000001a4a04000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __raw_spin_lock_bh include/linux/spinlock_api_smp.h:136 [inline] _raw_spin_lock_bh+0x39/0x40 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:321 [inline] rt6_select net/ipv6/route.c:786 [inline] ip6_pol_route+0x1be3/0x3bd0 net/ipv6/route.c:1650 sctp: [Deprecated]: syz-executor1 (pid 26576) Use of int in maxseg socket option. Use struct sctp_assoc_value instead TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters. ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1843 fib6_rule_lookup+0x9e/0x2a0 net/ipv6/ip6_fib.c:309 ip6_route_output_flags+0x1f1/0x2b0 net/ipv6/route.c:1871 ip6_route_output include/net/ip6_route.h:80 [inline] ip6_dst_lookup_tail+0x4ea/0x970 net/ipv6/ip6_output.c:953 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1076 sctp_v6_get_dst+0x675/0x1c30 net/sctp/ipv6.c:274 sctp_transport_route+0xa8/0x430 net/sctp/transport.c:287 sctp_assoc_add_peer+0x4fe/0x1100 net/sctp/associola.c:656 __sctp_connect+0x251/0xc80 net/sctp/socket.c:1187 sctp_connect+0xb4/0xf0 net/sctp/socket.c:4209 inet_dgram_connect+0x16b/0x1f0 net/ipv4/af_inet.c:541 SYSC_connect+0x20a/0x480 net/socket.c:1642 SyS_connect+0x24/0x30 net/socket.c:1623 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: 66f5d6ce ("ipv6: replace rwlock with rcu and spinlock in fib6_table") Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
-
Christoph Paasch authored
We already allow to enable TFO without a cookie by using the fastopen-sysctl and setting it to TFO_SERVER_COOKIE_NOT_REQD (or TFO_CLIENT_NO_COOKIE). This is safe to do in certain environments where we know that there isn't a malicous host (aka., data-centers) or when the application-protocol already provides an authentication mechanism in the first flight of data. A server however might be providing multiple services or talking to both sides (public Internet and data-center). So, this server would want to enable cookie-less TFO for certain services and/or for connections that go to the data-center. This patch exposes a socket-option and a per-route attribute to enable such fine-grained configurations. Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Reviewed-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Tim Hansen authored
Mark hlist node in sk rcu iterator as protected by the rcu. hlist_next_rcu accomplishes this and silences the warnings sparse throws. Found with make C=1 net/ipv4/udp.o on linux-next tag next-20171009. Signed-off-by:
Tim Hansen <devtimhansen@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Use BUG_ON instead of if condition followed by BUG in tcp_time_wait. This issue was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Use BUG_ON instead of if condition followed by BUG in icmp_timestamp. This issue was detected with the help of Coccinelle. Signed-off-by:
-
Jesper Dangaard Brouer authored
As pointed out by Michael, commit 1c601d82 ("bpf: cpumap xdp_buff to skb conversion and allocation") contains a classical example of the potential lost wake-up problem. We need to recheck the condition __ptr_ring_empty() after changing current->state to TASK_INTERRUPTIBLE, this avoids a race between wake_up_process() and schedule(). After this, a race with wake_up_process() will simply change the state to TASK_RUNNING, and the schedule() call not really put us to sleep. Fixes: 1c601d82 ("bpf: cpumap xdp_buff to skb conversion and allocation") Reported-by:
"Michael S. Tsirkin" <mst@redhat.com> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I placed the "fall through" comment on its own line, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== ipv6: addrconf: hash improvements and cleanups Remove unecessary BH blocking, and bring IPv6 addrconf to modern world, with per netns hash perturbation and decent hash size. ==================== Signed-off-by: -
Eric Dumazet authored
rcu_read_lock() is enough here, no need to block BH. Signed-off-by:
-
Eric Dumazet authored
Table is really RCU protected, no need to block BH Signed-off-by:
-
Eric Dumazet authored
rcu_read_lock() is enough here, no need to block BH. Signed-off-by:
-
Eric Dumazet authored
rcu_read_lock() is enough here, as inet6_ifa_finish_destroy() uses kfree_rcu() Signed-off-by:
-
Eric Dumazet authored
Bring IPv6 in par with IPv4 : - Use net_hash_mix() to spread addresses a bit more. - Use 256 slots hash table instead of 16 Signed-off-by:
-
Eric Dumazet authored
ipv6_add_addr_hash() can compute the hash value outside of locked section and pass it to ipv6_chk_same_addr(). Signed-off-by:
-
Eric Dumazet authored
ipv6_chk_same_addr() is only used by ipv6_add_addr_hash(), so moving it avoids a forward declaration. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: bpf: stack support in offload This series brings stack support for offload. We use the LMEM (Local memory) register file as memory to store the stack. Since this is a register file we need to do appropriate shifts on unaligned accesses. Verifier's state tracking helps us with that. LMEM can't be accessed directly, so we add support for setting pointer registers through which one can read/write LMEM. This set does not support accessing the stack when the alignment is not known. This can be added later (most likely using the byte_align instructions). There is also a number of optimizations which have been left out: - in more complex non aligned accesses, double shift and rotation can save us a cycle. This, however, leads to code explosion since all access sizes have to be coded separately; - since setting LM pointers costs around 5 cycles, we should be tracking their values to make sure we don't move them when they're already set correctly for earlier access; - in case of 8 byte access aligned to 4 bytes and crossing 32 byte boundary but not crossing a 64 byte boundary we don't have to increment the pointer, but this seems like a pretty rare case to justify the added complexity. ==================== Signed-off-by: -
Jakub Kicinski authored
Loading 64bit constants require up to 4 load immediates, since we can only load 16 bits at a time. If the 32bit halves of the 64bit constant are the same, however, we can save a cycle by doing a register move instead of two loads of 16 bits. Note that we don't optimize the normal ALU64 load because even though it's a 64 bit load the upper half of the register is a coming from sign extension so we can load it in one cycle anyway. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
If stack pointer has a different value on different paths but the alignment to words (4B) remains the same, we can set a new LMEM access pointer to the calculated value and access whichever word it's pointing to. Signed-off-by:
-
Jakub Kicinski authored
To access beyond 64th byte of the stack we need to set a new stack pointer register (LMEM is accessed indirectly through those pointers). Add a function for encoding local CSR access instruction. Use stack pointer number 3. Note that stack pointer registers allow us to index into 32 bytes of LMEM (with shift operations i.e. when operands are restricted). This means if access is crossing 32 byte boundary we must not use offsetting, we have to set the pointer to the exact address and move it with post-increments. We depend on the datapath placing the stack base address in GPR A22 for our use. Signed-off-by:
-
Jakub Kicinski authored
As long as the verifier tells us the stack offset exactly we can render the LMEM reads quite easily. Simply make sure that the offset is constant for a given instruction and add it to the instruction's offset. Signed-off-by:
-
Jakub Kicinski authored
When we are performing unaligned stack accesses in the 32-64B window we have to do a read-modify-write cycle. E.g. for reading 8 bytes from address 17: 0: tmp = stack[16] 1: gprLo = tmp >> 8 2: tmp = stack[20] 3: gprLo |= tmp << 24 4: tmp = stack[20] 5: gprHi = tmp >> 8 6: tmp = stack[24] 7: gprHi |= tmp << 24 The load on line 4 is unnecessary, because tmp already contains data from stack[20]. For write we can optimize both loads and writebacks away. Signed-off-by:
-
Jakub Kicinski authored
Add simple stack read support, similar to write in every aspect, but data flowing the other way. Note that unlike write which can be done in smaller than word quantities, if registers are loaded with less-than-word of stack contents - the values have to be zero extended. Signed-off-by:
-
