- 13 Dec, 2019 3 commits
-
-
Tuowen Zhao authored
commit 38e45d81 upstream. On sparc64, the whole physical IO address space is accessible using physically addressed loads and stores. *_uc does nothing like the others. Cc: <stable@vger.kernel.org> # v4.19+ Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Tuowen Zhao <ztuowen@gmail.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jon Hunter authored
commit 1e5e929c upstream. Commit 34993594 ("arm64: tegra: Enable HDMI on Jetson TX1") added a regulator for HDMI on the Jetson TX1 platform. This regulator has an active high enable, but the GPIO specifier for enabling the regulator incorrectly defines it as active-low. This causes the following warning to occur on boot ... WARNING KERN regulator@10 GPIO handle specifies active low - ignored The fixed-regulator binding does not use the active-low flag from the gpio specifier and purely relies of the presence of the 'enable-active-high' property to determine if it is active high or low (if this property is omitted). Fix this warning by setting the GPIO to active-high in the GPIO specifier which aligns with the presense of the 'enable-active-high' property. Fixes: 34993594 ("arm64: tegra: Enable HDMI on Jetson TX1") Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Navid Emamdoost authored
commit d563131e upstream. In rsi_send_beacon, if rsi_prepare_beacon fails the allocated skb should be released. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
- 05 Dec, 2019 37 commits
-
-
Greg Kroah-Hartman authored
-
Chuhong Yuan authored
commit a31eda65 upstream. pm_runtime_put_autosuspend in probe will call runtime suspend to disable clks automatically if CONFIG_PM is defined. (If CONFIG_PM is not defined, its implementation will be empty, then runtime suspend will not be called.) Therefore, we can call pm_runtime_get_sync to runtime resume it first to enable clks, which matches the runtime suspend. (Only when CONFIG_PM is defined, otherwise pm_runtime_get_sync will also be empty, then runtime resume will not be called.) Then it is fine to disable clks without causing clock count mis-match. Fixes: c43eab3e ("net: fec: add missed clk_disable_unprepare in remove") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Hans de Goede authored
commit f3e4f3fc upstream. The AML code implementing the WMI methods creates a variable length field to hold the input data we pass like this: CreateDWordField (Arg1, 0x0C, DSZI) Local5 = DSZI /* \HWMC.DSZI */ CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN) If we pass 0 as bios_args.datasize argument then (Local5 * 0x08) is 0 which results in these errors: [ 71.973305] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20190816/dsopcode-133) [ 71.973332] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529) [ 71.973413] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529) And in our HPWMI_WIRELESS2_QUERY calls always failing. for read commands like HPWMI_WIRELESS2_QUERY the DSZI value is not used / checked, except for read commands where extra input is needed to specify exactly what to read. So for HPWMI_WIRELESS2_QUERY we can safely pass the size of the expected output as insize to hp_wmi_perform_query(), as we are already doing for all other HPWMI_READ commands we send. Doing so fixes these errors. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
commit 16245db1 upstream. The HP WMI calls may take up to 128 bytes of data as input, and the AML methods implementing the WMI calls, declare a couple of fields for accessing input in different sizes, specifycally the HWMC method contains: CreateField (Arg1, 0x80, 0x0400, D128) Even though we do not use any of the WMI command-types which need a buffer of this size, the APCI interpreter still tries to create it as it is declared in generoc code at the top of the HWMC method which runs before the code looks at which command-type is requested. This results in many of these errors on many different HP laptop models: [ 14.459261] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20170303/dsopcode-236) [ 14.459268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8edcc61507f8), AE_AML_BUFFER_LIMIT (20170303/psparse-543) [ 14.459279] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8edcc61523c0), AE_AML_BUFFER_LIMIT (20170303/psparse-543) This commit increases the size of the data element of the bios_args struct to 128 bytes fixing these errors. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703Signed-off-by:
-
Pierre-Yves MORDRET authored
commit cc832dc8 upstream. When a period length is not multiple of FIFO some data may be stuck within FIFO. Burst/FIFO Threshold/Period or buffer length check has to be hardened In any case DMA will grant any request from client but will degraded any parameters whether awkward. Signed-off-by:
Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Wen Yang authored
commit 1c3816a1 upstream. The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Fixes: 7dd0d835 ("ASoC: stm32: sai: simplify sync modes management") Signed-off-by:
Wen Yang <yellowriver2010@hotmail.com> Acked-by:
Olivier Moysan <olivier.moysan@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Olivier Moysan authored
commit 8ba3c521 upstream. Because of regmap cache, interrupts may not be cleared as expected. Declare IFCR register as write only and make writings to IFCR register unconditional. Signed-off-by:
-
Olivier Moysan authored
commit 0c4c68d6 upstream. I2S supports 16 bits data in 32 channel length. However the expected driver behavior, is to set channel length to 16 bits when data format is 16 bits. Signed-off-by:
-
Olivier Moysan authored
commit 1ac2bd16 upstream. DMA configuration is not balanced on start/stop. Move DMA configuration to trigger callback. Signed-off-by:
-
Alexandre Torgue authored
commit cd8c9b5a upstream. configs is allocated by pinconf_generic_parse_dt_config(), pinctrl_utils_add_map_configs() duplicates configs so it can and has to be freed to prevent memory leaks. Signed-off-by:
Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Fabien Dessenne authored
commit 6899b4f7 upstream. Fix null pointer issue if resource_size is called with no ioresource. Signed-off-by:
Ludovic Barre <ludovic.barre@st.com> Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
-
Gabriel Fernandez authored
commit 749c9e55 upstream. Fixes parent clock for axi, fdcan, sai and adc12 clocks. Fixes: e51d297e ("clk: stm32mp1: add Sub System clocks") Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Gabriel Fernandez authored
commit 72cfd1ad upstream. STM32MP1 clock IP offers lots of Kernel clocks that are shared by multiple IP's at the same time. Then boot loader applies a clock tree that allows to use all IP's at same time and with the maximum of performance. Not change parents on a change rate on kernel clocks ensures the integrity of the system. Signed-off-by:
-
Gabriel Fernandez authored
commit 140fc4e4 upstream. index 8: ck_mcu is divided by 256 (not 512) Fixes: e51d297e ("clk: stm32mp1: add Sub System clocks") Signed-off-by:
-
Gabriel Fernandez authored
commit d3f2e33c upstream. The divider of HSI (clk-hsi-div) is power of two divider. Fixes: 9bee94e7 ("clk: stm32mp1: Introduce STM32MP1 clock driver") Signed-off-by:
-
Lionel Debieve authored
commit af0d4442 upstream. No remove function implemented yet in the driver. Without remove function, the pm_runtime implementation complains when removing and probing again the driver. Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Hugues Fruchet authored
commit ab41b99e upstream. Start streaming was sometimes failing because of pm_runtime_get_sync() non-0 return value. In fact return value was not an error but a positive value (1), indicating that PM was already enabled. Fix this by going to error path only with negative return value. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Hugues Fruchet authored
commit b3ce6f6f upstream. Avoid call of dmaengine_terminate_all() between dmaengine_prep_slave_single() and dmaengine_submit() by locking the whole DMA submission sequence. Signed-off-by:
-
Lionel Debieve authored
commit 0acabece upstream. Correct condition for the second hmac loop. Key must be only set in the first loop. Initial condition was wrong, HMAC_KEY flag was not properly checked. Signed-off-by:
-
Candle Sun authored
commit 1cb0d2ae upstream. Upstream commit 58e75155 ("HID: core: move Usage Page concatenation to Main item") adds support for Usage Page item after Usage ID items (such as keyboards manufactured by Primax). Usage Page concatenation in Main item works well for following report descriptor patterns: USAGE_PAGE (Keyboard) 05 07 USAGE_MINIMUM (Keyboard LeftControl) 19 E0 USAGE_MAXIMUM (Keyboard Right GUI) 29 E7 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (8) 95 08 INPUT (Data,Var,Abs) 81 02 ------------- USAGE_MINIMUM (Keyboard LeftControl) 19 E0 USAGE_MAXIMUM (Keyboard Right GUI) 29 E7 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (8) 95 08 USAGE_PAGE (Keyboard) 05 07 INPUT (Data,Var,Abs) 81 02 But it makes the parser act wrong for the following report descriptor pattern(such as some Gamepads): USAGE_PAGE (Button) 05 09 USAGE (Button 1) 09 01 USAGE (Button 2) 09 02 USAGE (Button 4) 09 04 USAGE (Button 5) 09 05 USAGE (Button 7) 09 07 USAGE (Button 8) 09 08 USAGE (Button 14) 09 0E USAGE (Button 15) 09 0F USAGE (Button 13) 09 0D USAGE_PAGE (Consumer Devices) 05 0C USAGE (Back) 0a 24 02 USAGE (HomePage) 0a 23 02 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (11) 95 0B INPUT (Data,Var,Abs) 81 02 With Usage Page concatenation in Main item, parser recognizes all the 11 Usages as consumer keys, it is not the HID device's real intention. This patch checks whether Usage Page is really defined after Usage ID items by comparing usage page using status. Usage Page concatenation on currently defined Usage Page will always do in local parsing when Usage ID items encountered. When Main item is parsing, concatenation will do again with last defined Usage Page if this page has not been used in the previous usages concatenation. Signed-off-by:
Candle Sun <candle.sun@unisoc.com> Signed-off-by:
Nianfu Bai <nianfu.bai@unisoc.com> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Siarhei Vishniakou <svv@google.com> Signed-off-by:
-
Yuchung Cheng authored
commit 88f8598d upstream. Previously TCP only warns if its RTO timer fires and the retransmission queue is empty, but it'll cause null pointer reference later on. It's better to avoid such catastrophic failure and simply exit with a warning. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Arnaud Pouliquen authored
commit dba9a3df upstream. Add spinlock protection on IPCC register update to avoid race condition. Without this fix, stm32_ipcc_set_bits and stm32_ipcc_clr_bits can be called in parallel for different channels. This results in register corruptions. Signed-off-by:
Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by:
-
Claudiu Beznea authored
commit cbb32079 upstream. Revert shift by 8 of state->base.alpha. This introduced a regression on planes. Fixes: 7f73c10b ("drm/atmel-hclcdc: Convert to the new generic alpha property") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1556195748-11106-7-git-send-email-claudiu.beznea@microchip.comSigned-off-by:
-
huijin.park authored
commit 84a1c210 upstream. The "params->size" is defined as "u64". And "info->sector_size" and "info->n_sectors" are defined as unsigned int and u16. Thus, u64 data might have strange data(loss data) if the result overflows an unsigned int. This patch casts "info->sector_size" to an u64. Signed-off-by:
huijin.park <huijin.park@samsung.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Wen Yang authored
commit a12085d1 upstream. of_find_device_by_node() takes a reference to the struct device when it finds a match via get_device, there is no need to call get_device() twice. We also should make sure to drop the reference to the device taken by of_find_device_by_node() on driver unbind. Fixes: f88fc122 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by:
Boris Brezillon <bbrezillon@kernel.org> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Acked-by:
-
Miquel Raynal authored
commit e39bb786 upstream. Wrong copy/paste from the previous block, the error message should refer to #size-cells instead of #address-cells. Fixes: f88fc122 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Paul Thomas authored
commit a6252047 upstream. Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been enabled for this skb. It does fix the issue where normal socks that aren't expecting a timestamp will not wake up on select, but when a user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work. Signed-off-by:
Paul Thomas <pthomas8589@gmail.com> Signed-off-by:
-
Harini Katakam authored
commit 7ad342bc upstream. The subns increment register has 24 bits as follows: RegBit[15:0] = Subns[23:8]; RegBit[31:24] = Subns[7:0] Fix the same in the driver and increase sub ns resolution to the best capable, 24 bits. This should be the case on all GEM versions that this PTP driver supports. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
-
Eugen Hristev authored
commit 86329448 upstream. WDD value must be always set to max (0xFFF) otherwise the hardware block will reset the board on the first ping of the watchdog. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Theodore Ts'o authored
commit 4ea99936 upstream. It's possible to specify a non-zero s_want_extra_isize via debugging option, and this can cause bad things(tm) to happen when using a file system with an inode size of 128 bytes. Add better checking when the file system is mounted, as well as when we are actually doing the trying to do the inode expansion. Link: https://lore.kernel.org/r/20191110121510.GH23325@mit.edu Reported-by: syzbot+f8d6f8386ceacdbfff57@syzkaller.appspotmail.com Reported-by: syzbot+33d7ea72e47de3bdf4e1@syzkaller.appspotmail.com Reported-by: syzbot+44b6763edfc17144296f@syzkaller.appspotmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit 61183b05 ] This driver forgets to kill tasklet in remove. Add the call to fix it. Fixes: 032dc41b ("net: macb: Handle HRESP error") Signed-off-by:
-
Dust Li authored
[ Upstream commit 14e54ab9 ] When a classful qdisc's child qdisc has set the flag TCQ_F_CPUSTATS (pfifo_fast for example), the child qdisc's cpu_bstats should be passed to gnet_stats_copy_basic(), but many classful qdisc didn't do that. As a result, `tc -s class show dev DEV` always return 0 for bytes and packets in this case. Pass the child qdisc's cpu_bstats to gnet_stats_copy_basic() to fix this issue. The qstats also has this problem, but it has been fixed in 5dd431b6 ("net: sched: introduce and use qstats read...") and bstats still remains buggy. Fixes: 22e0f8b9 ("net: sched: make bstats per cpu and estimator RCU safe") Signed-off-by:
Dust Li <dust.li@linux.alibaba.com> Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 31243461 ] This patch is to fix a data-race reported by syzbot: BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1: sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091 sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465 sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916 inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734 __sys_accept4+0x224/0x430 net/socket.c:1754 __do_sys_accept net/socket.c:1795 [inline] __se_sys_accept net/socket.c:1792 [inline] __x64_sys_accept+0x4e/0x60 net/socket.c:1792 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0: sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894 rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] head_hashfn lib/rhashtable.c:41 [inline] rhashtable_rehash_one lib/rhashtable.c:245 [inline] rhashtable_rehash_chain lib/rhashtable.c:276 [inline] rhashtable_rehash_table lib/rhashtable.c:316 [inline] rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate is changing its value. However, what rhashtable wants is netns from asoc base.sk, and for an asoc, its netns won't change once set. So we can simply fix it by caching netns since created. Fixes: d6c0256a ("sctp: add the rhashtable apis for sctp global transport hashtable") Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
John Rutherford authored
[ Upstream commit fd567ac2 ] In commit 4f07b80c ("tipc: check msg->req data len in tipc_nl_compat_bearer_disable") the same patch code was copied into routines: tipc_nl_compat_bearer_disable(), tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats(). The two link routine occurrences should have been modified to check the maximum link name length and not bearer name length. Fixes: 4f07b80c ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable") Signed-off-by:
John Rutherford <john.rutherford@dektech.com.au> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 4b67c515 ] test_sockmap creates a temporary file to use for sendpage. this may fail for various reasons. Handle the error rather than segfault. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 8a574f86 ] If we can't build the flow del notification, we can simply delete the flow, no need to crash the kernel. Still keep a WARN_ON to preserve debuggability. Note: the BUG_ON() predates the Fixes tag, but this change can be applied only after the mentioned commit. v1 -> v2: - do not leak an skb on error Fixes: aed06778 ("openvswitch: Minimize ovs_flow_cmd_del critical section.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 8ffeb03f ] All the callers of ovs_flow_cmd_build_info() already deal with error return code correctly, so we can handle the error condition in a more gracefull way. Still dump a warning to preserve debuggability. v1 -> v2: - clarify the commit message - clean the skb and report the error (DaveM) Fixes: ccb1352e ("net: Add Open vSwitch kernel components.") Signed-off-by:
-
