Since the SSC is already being registered as a device under arch and
the DMA and SSC hardware are pretty much the same provide a simplified
device registration function for the Atmel SSC which will add the
ASoC-specific devices within the ASoC code, parenting the SSC device
off the actual SSC device. Also use it in the sam9g20-ek driver.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

A couple of typos in the multi-component conversion.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Instead of unconditionally enabling the crystal oscillator on the WM8731
only enable it when explicitly selected via set_sysclk(), allowing machine
drivers to specify that they drive a clock into MCLK alone. This avoids
any conflicts between the oscillator and the external MCLK source and saves
power for systems which do not need the oscillator.

This should also deliver a small power saving on systems using the crystal
since the oscillator will only be enabled when the ADC or DAC is active.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Output size_t type as a "%Zu" to avoid warnings.
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Dead pxa2xx-pcm.h includes and a missing ,
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

These will conflict with queued changes to board-n8x0.c coming from
linux-omap tree. Only side effect from this dropping is that the integrated
digital microphone on Nokia N810 will stop working when ASoC multi-component
is merged.

As currently the N810 is not very usable in mainline, I consider this as a
minor issue that can be fixed in linux-omap tree the after the
multi-component is merged.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

This patch contains two small fixes for the sound board driver for the qi_lb60
introduced by the multi-component patches:
* Remove unnecessary includes: Those includes where only used to get the
  definitions for the DAI devices and are thus not needed anymore.
* Fix a typo.
Signed-off-By: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Reported-by: Seungwhan Youn <claude.youn@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

The RX and TX directions were inverted.
Reported-by: Seungwhan Youn <claude.youn@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Fairly simple conflicts, the most serious ones are the i.MX ones which I
suspect now need another rename.

Conflicts:
	arch/arm/mach-mx2/clock_imx27.c
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-omap2/board-rx51-peripherals.c
	arch/arm/mach-omap2/board-zoom2.c
	sound/soc/fsl/mpc5200_dma.c
	sound/soc/fsl/mpc5200_dma.h
	sound/soc/fsl/mpc8610_hpcd.c
	sound/soc/pxa/spitz.c

This is not supported by current hardware revisions.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  gcc-4.6: ACPI: fix unused but set variables in ACPI
  ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI processor: remove deprecated ACPI procfs I/F
  ACPI power_resource: remove unused procfs I/F
  ACPI: remove deprecated ACPI procfs I/F
  ACPI: introduce drivers/acpi/sysfs.c
  ACPI: introduce module parameter acpi.aml_debug_output
  ACPI: introduce drivers/acpi/debugfs.c
  ACPI, APEI, ERST debug support
  ACPI, APEI, Manage GHES as platform devices
  ACPI, APEI, Rename CPER and GHES severity constants
  ACPI, APEI, Fix a typo of error path of apei_resources_request
  ACPI / ACPICA: Fix reference counting problems with GPE handlers
  ACPI: Add the check of ADR flag in course of finding ACPI handle for PCI device
  ACPI / Sleep: Drop acpi_suspend_finish()
  ACPI / Sleep: Consolidate suspend and hibernation routines
  ACPI / Wakeup: Simplify enabling of wakeup devices
  ACPI / Sleep: Rework enabling wakeup devices
  ACPI / Sleep: Free NVS copy if suspending of devices fails

Fixed up totally buggered "ACPI: fix unused but set variables in ACPI"
patch that doesn't even compile in the merge.

Thanks to Sedat Dilek <sedat.dilek@googlemail.com> for noticing the
breakage before I even pulled.  And a big "Grrr.." at Len for not even
bothering to compile the tree before asking me to pull.

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Fix 32-bit build warning with __cmpxchg()
  intr-remap: allow disabling source id checking

* git://git.infradead.org/mtd-2.6:
  mtd/nand_ids: Fix buswidth
  mtd/m25p80: fix test for end of loop
  mtd/m25p80: retlen is never NULL
  MIPS: Fix gen_nand probe structures contents
  gen_nand: Test if nr_chips field is valid
  BFIN: Fix gen_nand probe structures contents
  nand/denali: move all hardware initialization work to denali_hw_init
  nand/denali: Add a page check in denali_read_page & denali_read_page_raw
  nand/denali: use cpu_relax() while waiting for hardware interrupt
  nand/denali: change read_status function method
  nand/denali: Fixed check patch warnings
  ARM: Fix gen_nand probe structures contents
  mtd/nand_base: fix kernel-doc warnings & typos
  nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk
  nand/denali: Fixed handle ECC error bugs
  nand/denali: use iowrite32() to replace denali_write32()
  nand/denali: Fixed probe function bugs

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: don't validate CROSS_COMPILE needlessly
  arch/tile: export only COMMAND_LINE_SIZE to userspace.
  arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
  arch/tile: Rename the hweight() implementations to __arch_hweight()
  arch/tile: extend syscall ABI to set r1 on return as well.
  arch/tile: Various cleanups.
  arch/tile: support backtracing on TILE-Gx
  arch/tile: Fix a couple of issues with the COMPAT code for TILE-Gx.
  arch/tile: Use separate, better minsec values for clocksource and sched_clock.
  arch/tile: correct a bug in freeing bootmem by VA for the optional second initrd.
  arch: tile: mm: pgtable.c: Removed duplicated #include
  arch: tile: kernel/proc.c Removed duplicated #include
  Add fanotify syscalls to <asm-generic/unistd.h>.
  arch/tile: support new kunmap_atomic() naming convention.
  tile: remove unused ISA_DMA_THRESHOLD define

Conflicts in arch/tile/configs/tile_defconfig (pick the mainline version
with the reduced defconfig).

With this change, the arch/tile Makefile will only check for a valid
combination of CROSS_COMPILE vs "uname -m" for a few common targets
that are typically the ones we get wrong (vmlinux, all, and modules).
The change handles the case of an empty "make" goal like "make all".
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

This commit makes the stack guard page somewhat less visible to user
space. It does this by:

 - not showing the guard page in /proc/<pid>/maps

   It looks like lvm-tools will actually read /proc/self/maps to figure
   out where all its mappings are, and effectively do a specialized
   "mlockall()" in user space.  By not showing the guard page as part of
   the mapping (by just adding PAGE_SIZE to the start for grows-up
   pages), lvm-tools ends up not being aware of it.

 - by also teaching the _real_ mlock() functionality not to try to lock
   the guard page.

   That would just expand the mapping down to create a new guard page,
   so there really is no point in trying to lock it in place.

It would perhaps be nice to show the guard page specially in
/proc/<pid>/maps (or at least mark grow-down segments some way), but
let's not open ourselves up to more breakage by user space from programs
that depends on the exact deails of the 'maps' file.

Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools
source code to see what was going on with the whole new warning.

Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be
Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sound/usb/format: silence uninitialized variable warnings
  MAINTAINERS: Add Ian Lartey as comaintaner for Wolfson devices
  MAINTAINERS: Make Wolfson entry also cover CODEC drivers
  ASoC: Only tweak WM8994 chip configuration on devices up to rev D
  ASoC: Optimise DSP performance for WM8994
  ALSA: hda - Fix dynamic ADC change working again
  ALSA: hda - Restrict PCM parameters per ELD information over HDMI
  sound: oss: sh_dac_audio.c removed duplicated #include

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: recognize Lincroft Atom Processor
  intel_idle: no longer EXPERIMENTAL
  intel_idle: disable module support
  intel_idle: add support for Westmere-EX
  intel_idle: delete power_policy modparam, and choose substate functions
  intel_idle: delete substates DEBUG modparam

This fixes a failure in "make headers_check" for tile.
I hadn't realized this file was exported to userspace by default.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

See commit a6eb9fe1.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

Merge branch 'for-2.6.36' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.37

Trivial overlap with the removal of the local revision variable.

Conflicts:
	sound/soc/codecs/wm8994.c

The DAC OSR should be selected based on the sample clock ratio.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Drive a minimal supported number of clocks required for the current
bit format in master mode. In slave mode this setting has no effect.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Implement set_sysclk() and then rather than assuming 256fs use the
supplied value to calculate and configure the clock ratio for the
currently used sample rate. As a side effect we also end up
implementing clock selection for the ADC path.

In order to avoid confusion remove the existing set_clkdiv() based
configuration of the clock source for the DAC and update the SMDK64xx
driver (which is the only in-tree user of the CODEC).
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

In the case of the BCLK rate the defines are at best misleading anyway.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

All the cool kids are using snd_soc_update_bits() these days.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

There's much more needed but this'll get us started.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

SCFR bit is required to be always set if pxa ssp is in slave mode. This bit
indicates clock input to SSPSCLK is only active during data transfers.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Since pxa2xx-pcm.h is removed from sound/soc/pxa, we need to update the
path in related files.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Tested-by: Ian Lartey <ian@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

 Removed #include of pxa2xx-pcm.h
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Since the core now includes deduplication in the name of CODEC
devices there's no need to add extra for the debugfs directory name.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Since the debugfs directory is current per CODEC we should only init
it when the CODEC is initialised, otherwise we end up with errors
being generated when an attempt is made to add duplicate debugfs
entries.

Since most of this stuff is actually for the card we should refactor
but this can come later.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

Gcc complains that ret might be used uninitialized:

sound/usb/format.c: In function ‘snd_usb_parse_audio_format’:
sound/usb/format.c:354: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:354: note: ‘ret’ was declared here
sound/usb/format.c:414: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:414: note: ‘ret’ was declared here

I suppose it could be uninitialized if there is ever a UAC_VERSION_3
released. Anyway this patch is worthwhile if only to silence the gcc
warning.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Conflicts:
	drivers/acpi/debug.c
Signed-off-by: Len Brown <len.brown@intel.com>