Skip to content

L
linux
Switch branch/tag
  1. 14 Apr, 2019 4 commits
  3. 13 Apr, 2019 14 commits
  5. 12 Apr, 2019 15 commits
    • Leonard Crestez's avatar
      clk: imx: Fix PLL_1416X not rounding rates · f89b9e1b
      Leonard Crestez authored 
      Code which initializes the "clk_init_data.ops" checks pll->rate_table
before that field is ever assigned to so it always picks
"clk_pll1416x_min_ops".

This breaks dynamic rate rounding for features such as cpufreq.

Fix by checking pll_clk->rate_table instead, here pll_clk refers to
the constant initialization data coming from per-soc clk driver.
Signed-off-by: default avatarLeonard Crestez <leonard.crestez@nxp.com>
Fixes: 8646d4dc ("clk: imx: Add PLLs driver for imx8mm soc")
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
      f89b9e1b
    • Weiyi Lu's avatar
      clk: mediatek: fix clk-gate flag setting · b3cf181c
      Weiyi Lu authored 
      CLK_SET_RATE_PARENT would be dropped.
Merge two flag setting together to correct the error.

Fixes: 5a1cc4c2 ("clk: mediatek: Add flags to mtk_gate")
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarWeiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
      b3cf181c
    • Linus Torvalds's avatar
      Merge tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping · 8ee15f32
      Linus Torvalds authored 
      Pull dma-mapping fixes from Christoph Hellwig:
 "Fix a sparc64 sun4v_pci regression introduced in this merged window,
  and a dma-debug stracktrace regression from the big refactor last
  merge window"

* tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: only skip one stackframe entry
  sparc64/pci_sun4v: fix ATU checks for large DMA masks
      8ee15f32
    • Linus Torvalds's avatar
      Merge tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu · 4876191c
      Linus Torvalds authored 
      Pull IOMMU fix from Joerg Roedel:
 "Fix an AMD IOMMU issue where the driver didn't correctly setup the
  exclusion range in the hardware registers, resulting in exclusion
  ranges being one page too big.

  This can cause data corruption of the address of that last page is
  used by DMA operations"

* tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Set exclusion range correctly
      4876191c
    • Linus Torvalds's avatar
      Merge tag 'clang-format-for-linus-v5.1-rc5' of git://github.com/ojeda/linux · 8e72d95d
      Linus Torvalds authored 
      Pull clang-format update from Miguel Ojeda:
 "The usual roughly-per-release .clang-format macro list update"

* tag 'clang-format-for-linus-v5.1-rc5' of git://github.com/ojeda/linux:
  clang-format: Update with the latest for_each macro list
      8e72d95d
    • Linus Torvalds's avatar
      Merge tag 'mmc-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc · ea951a94
      Linus Torvalds authored 
      Pull MMC host fixes from Ulf Hansson:

 - alcor: Stabilize data write requests

 - sdhci-omap: Fix command error path during tuning

* tag 'mmc-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
  mmc: alcor: don't write data before command has completed
      ea951a94
    • Linus Torvalds's avatar
      Merge tag 'sound-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 372686e6
      Linus Torvalds authored 
      Pull sound fixes from Takashi Iwai:
 "Well, this one became unpleasantly larger than previous pull requests,
  but it's a kind of usual pattern: now it contains a collection of ASoC
  fixes, and nothing to worry too much.

  The fixes for ASoC core (DAPM, DPCM, topology) are all small and just
  covering corner cases. The rest changes are driver-specific, many of
  which are for x86 platforms and new drivers like STM32, in addition to
  the usual fixups for HD-audio"

* tag 'sound-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (66 commits)
  ASoC: wcd9335: Fix missing regmap requirement
  ALSA: hda: Fix racy display power access
  ASoC: pcm: fix error handling when try_module_get() fails.
  ASoC: stm32: sai: fix master clock management
  ASoC: Intel: kbl: fix wrong number of channels
  ALSA: hda - Add two more machines to the power_save_blacklist
  ASoC: pcm: update module refcount if module_get_upon_open is set
  ASoC: core: conditionally increase module refcount on component open
  ASoC: stm32: fix sai driver name initialisation
  ASoC: topology: Use the correct dobj to free enum control values and texts
  ALSA: seq: Fix OOB-reads from strlcpy
  ASoC: intel: skylake: add remove() callback for component driver
  ASoC: cs35l35: Disable regulators on driver removal
  ALSA: xen-front: Do not use stream buffer size before it is set
  ASoC: rockchip: pdm: change dma burst to 8
  ASoC: rockchip: pdm: fix regmap_ops hang issue
  ASoC: simple-card: don't select DPCM via simple-audio-card
  ASoC: audio-graph-card: don't select DPCM via audio-graph-card
  ASoC: tlv320aic32x4: Change author's name
  ALSA: hda/realtek - Add quirk for Tuxedo XC 1509
  ...
      372686e6
    • Linus Torvalds's avatar
      Merge tag 'acpi-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · f2a73469
      Linus Torvalds authored 
      Pull ACPI fix from Rafael Wysocki:
 "Fix an ACPICA issue introduced during the 4.20 development cycle and
  causing some systems to crash because of leftover operation region
  data still maintained after the operation region in question has gone
  away (Erik Schmauss)"

* tag 'acpi-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Namespace: remove address node from global list after method termination
      f2a73469
    • Linus Torvalds's avatar
      Merge tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm · 58890f31
      Linus Torvalds authored 
      Pull drm fixes from Dave Airlie:
 "Fixes across the driver spectrum this week, the mediatek fbdev support
  might be a bit late for this round, but I looked over it and it's not
  very large and seems like a useful feature for them.

  Otherwise the main thing is a regression fix for i915 5.0 bug that
  caused black screens on a bunch of Dell XPS 15s I think, I know at
  least Fedora is waiting for this to land, and the udl fix is also for
  a regression since 5.0 where unplugging the device would end badly.

  core:
   - make atomic hooks optional

  i915:
   - Revert a 5.0 regression where some eDP panels stopped working
   - DSI related fixes for platforms up to IceLake
   - GVT (regression fix, warning fix, use-after free fix)

  amdgpu:
   - Cursor fixes
   - missing PCI ID fix for KFD
   - XGMI fix
   - shadow buffer handling after reset fix

  udl:
   - fix unplugging device crashes.

  mediatek:
   - stabilise MT2701 HDMI support
   - fbdev support

  tegra:
   - fix for build regression in rc1.

  sun4i:
   - Allwinner A6 max freq improvements
   - null ptr deref fix

  dw-hdmi:
   - SCDC configuration improvements

  omap:
   - CEC clock management policy fix"

* tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm: (32 commits)
  gpu: host1x: Fix compile error when IOMMU API is not available
  drm/i915/gvt: Roundup fb->height into tile's height at calucation fb->size
  drm/i915/dp: revert back to max link rate and lane count on eDP
  drm/i915/icl: Fix port disable sequence for mipi-dsi
  drm/i915/icl: Ungate ddi clocks before IO enable
  drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phy
  drm/mediatek: using new factor for tvdpll for MT2701 hdmi phy
  drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phy
  drm/mediatek: make implementation of recalc_rate() for MT2701 hdmi phy
  drm/mediatek: fix the rate and divder of hdmi phy for MT2701
  drm/mediatek: fix possible object reference leak
  drm/i915: Get power refs in encoder->get_power_domains()
  drm/i915: Fix pipe_bpp readout for BXT/GLK DSI
  drm/amd/display: Fix negative cursor pos programming (v2)
  drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in sun8i_tcon_top_un/bind
  drm/udl: add a release method and delay modeset teardown
  drm/i915/gvt: Prevent use-after-free in ppgtt_free_all_spt()
  drm/i915/gvt: Annotate iomem usage
  drm/sun4i: DW HDMI: Lower max. supported rate for H6
  Revert "Documentation/gpu/meson: Remove link to meson_canvas.c"
  ...
      58890f31
    • Will Deacon's avatar
      arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value · 045afc24
      Will Deacon authored 
      Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't
explicitly set the return value on the non-faulting path and instead
leaves it holding the result of the underlying atomic operation. This
means that any FUTEX_WAKE_OP atomic operation which computes a non-zero
value will be reported as having failed. Regrettably, I wrote the buggy
code back in 2011 and it was upstreamed as part of the initial arm64
support in 2012.

The reasons we appear to get away with this are:

  1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get
     exercised by futex() test applications

  2. If the result of the atomic operation is zero, the system call
     behaves correctly

  3. Prior to version 2.25, the only operation used by GLIBC set the
     futex to zero, and therefore worked as expected. From 2.25 onwards,
     FUTEX_WAKE_OP is not used by GLIBC at all.

Fix the implementation by ensuring that the return value is either 0
to indicate that the atomic operation completed successfully, or -EFAULT
if we encountered a fault when accessing the user mapping.

Cc: <stable@kernel.org>
Fixes: 6170a974 ("arm64: Atomic operations")
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      045afc24
    • Joerg Roedel's avatar
      iommu/amd: Set exclusion range correctly · 3c677d20
      Joerg Roedel authored 
      The exlcusion range limit register needs to contain the
base-address of the last page that is part of the range, as
bits 0-11 of this register are treated as 0xfff by the
hardware for comparisons.

So correctly set the exclusion range in the hardware to the
last page which is _in_ the range.

Fixes: b2026aa2 ('x86, AMD IOMMU: add functions for programming IOMMU MMIO space')
Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      3c677d20
    • Miguel Ojeda's avatar
      clang-format: Update with the latest for_each macro list · f16628d6
      Miguel Ojeda authored 
      Re-run the shell fragment that generated the original list now that
there are two dozens of new entries after v5.1's merge window.
Signed-off-by: default avatarMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>
      f16628d6
    • Peter Zijlstra's avatar
      perf/core: Fix perf_event_disable_inatomic() race · 1d54ad94
      Peter Zijlstra authored 
      Thomas-Mich Richter reported he triggered a WARN()ing from event_function_local()
on his s390. The problem boils down to:

	CPU-A				CPU-B

	perf_event_overflow()
	  perf_event_disable_inatomic()
	    @pending_disable = 1
	    irq_work_queue();

	sched-out
	  event_sched_out()
	    @pending_disable = 0

					sched-in
					perf_event_overflow()
					  perf_event_disable_inatomic()
					    @pending_disable = 1;
					    irq_work_queue(); // FAILS

	irq_work_run()
	  perf_pending_event()
	    if (@pending_disable)
	      perf_event_disable_local(); // WHOOPS

The problem exists in generic, but s390 is particularly sensitive
because it doesn't implement arch_irq_work_raise(), nor does it call
irq_work_run() from it's PMU interrupt handler (nor would that be
sufficient in this case, because s390 also generates
perf_event_overflow() from pmu::stop). Add to that the fact that s390
is a virtual architecture and (virtual) CPU-A can stall long enough
for the above race to happen, even if it would self-IPI.

Adding a irq_work_sync() to event_sched_in() would work for all hardare
PMUs that properly use irq_work_run() but fails for software PMUs.

Instead encode the CPU number in @pending_disable, such that we can
tell which CPU requested the disable. This then allows us to detect
the above scenario and even redirect the IPI to make up for the failed
queue.
Reported-by: default avatarThomas-Mich Richter <tmricht@linux.ibm.com>
Tested-by: default avatarThomas Richter <tmricht@linux.ibm.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: default avatarMark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      1d54ad94
    • Dave Airlie's avatar
      Merge tag 'drm-intel-fixes-2019-04-11' of... · 788f07eb
      Dave Airlie authored 
      Merge tag 'drm-intel-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Revert back to max link rate and lane count on eDP.
- DSI related fixes for all platforms including Ice Lake.
- GVT Fixes including one vGPU display plane size regression fix,
one for preventing use-after-free in ppgtt shadow free function,
and another warning fix for iomem access annotation.
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411235832.GA6476@intel.com
      788f07eb
    • Jason Yan's avatar
      block: fix the return errno for direct IO · a89afe58
      Jason Yan authored 
      If the last bio returned is not dio->bio, the status of the bio will
not assigned to dio->bio if it is error. This will cause the whole IO
status wrong.

    ksoftirqd/21-117   [021] ..s.  4017.966090:   8,0    C   N 4883648 [0]
          <idle>-0     [018] ..s.  4017.970888:   8,0    C  WS 4924800 + 1024 [0]
          <idle>-0     [018] ..s.  4017.970909:   8,0    D  WS 4935424 + 1024 [<idle>]
          <idle>-0     [018] ..s.  4017.970924:   8,0    D  WS 4936448 + 321 [<idle>]
    ksoftirqd/21-117   [021] ..s.  4017.995033:   8,0    C   R 4883648 + 336 [65475]
    ksoftirqd/21-117   [021] d.s.  4018.001988: myprobe1: (blkdev_bio_end_io+0x0/0x168) bi_status=7
    ksoftirqd/21-117   [021] d.s.  4018.001992: myprobe: (aio_complete_rw+0x0/0x148) x0=0xffff802f2595ad80 res=0x12a000 res2=0x0

We always have to assign bio->bi_status to dio->bio.bi_status because we
will only check dio->bio.bi_status when we return the whole IO to
the upper layer.

Fixes: 542ff7bf ("block: new direct I/O implementation")
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: default avatarMing Lei <ming.lei@redhat.com>
Signed-off-by: default avatarJason Yan <yanaijie@huawei.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      a89afe58
  7. 11 Apr, 2019 7 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7