- 16 Mar, 2017 5 commits
-
-
Eric Anholt authored
The HDMI encoder IP embeds all needed blocks to output audio, with a custom DAI called MAI moving audio between the two parts of the HDMI core. This driver now exposes a sound card to let users stream audio to their display. Using the hdmi-codec driver has been considered here, but MAI meant having to significantly rework hdmi-codec, and it would have left little shared code with the I2S mode anyway. The encoder requires that the audio be SPDIF-formatted frames only, which alsalib will format-convert for us. This patch is the combined work of Eric Anholt (initial register setup with a separate dmaengine driver and using simple-audio-card) and Boris Brezillon (moving it all into HDMI, massive debug to get it actually working), and which Eric has the permission to release. v2: Drop "-audio" from sound card name, since that's already implied (suggestion by Boris) Signed-off-by:Eric Anholt <eric@anholt.net> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170227202803.12855-2-eric@anholt.net
-
Boris Brezillon authored
These are optional, but necessary for HDMI audio support. Signed-off-by:
Rob Herring <robh@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170227202803.12855-1-eric@anholt.net
-
Boris Brezillon authored
The current suspend resume implementation is assuming register values are kept when entering suspend, which is no longer the case with the suspend-to-RAM on the sama5d2. While at it, switch to the generic infrastructure to enter suspend mode (drm_atomic_helper_suspend/resume()). Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by:
Sylvain Rochet <sylvain.rochet@finsecur.com> Link: http://patchwork.freedesktop.org/patch/msgid/1488371461-22243-1-git-send-email-boris.brezillon@free-electrons.com
-
Chris Wilson authored
Avoid adding to the waitqueue and reprobing the current vblank if the caller is only querying the current vblank sequence and timestamp, where we know that the wait would return immediately. v2: Add CRTC identifier to debug messages Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Michel Dänzer <michel@daenzer.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Dave Airlie <airlied@redhat.com>, Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by:
Michel Dänzer <michel@daenzer.net> Reviewed-and-tested-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
-
Chris Wilson authored
On vblank instant-off systems, we can get into a situation where the cost of enabling and disabling the vblank IRQ around a drmWaitVblank query dominates. And with the advent of even deeper hardware sleep state, touching registers becomes ever more expensive. However, we know that if the user wants the current vblank counter, they are also very likely to immediately queue a vblank wait and so we can keep the interrupt around and only turn it off if we have no further vblank requests queued within the interrupt interval. After vblank event delivery, this patch adds a shadow of one vblank where the interrupt is kept alive for the user to query and queue another vblank event. Similarly, if the user is using blocking drmWaitVblanks, the interrupt will be disabled on the IRQ following the wait completion. However, if the user is simply querying the current vblank counter and timestamp, the interrupt will be disabled after every IRQ and the user will enabled it again on the first query following the IRQ. v2: Mario Kleiner - After testing this, one more thing that would make sense is to move the disable block at the end of drm_handle_vblank() instead of at the top. Turns out that if high precision timestaming is disabled or doesn't work for some reason (as can be simulated by echo 0 > /sys/module/drm/parameters/timestamp_precision_usec), then with your delayed disable code at its current place, the vblank counter won't increment anymore at all for instant queries, ie. with your other "instant query" patches. Clients which repeatedly query the counter and wait for it to progress will simply hang, spinning in an endless query loop. There's that comment in vblank_disable_and_save: "* Skip this step if there isn't any high precision timestamp * available. In that case we can't account for this and just * hope for the best. */ With the disable happening after leading edge of vblank (== hw counter increment already happened) but before the vblank counter/timestamp handling in drm_handle_vblank, that step is needed to keep the counter progressing, so skipping it is bad. Now without high precision timestamping support, a kms driver must not set dev->vblank_disable_immediate = true, as this would cause problems for clients, so this shouldn't matter, but it would be good to still make this robust against a future kms driver which might have unreliable high precision timestamping, e.g., high precision timestamping that intermittently doesn't work. v3: Patch before coffee needs extra coffee. Testcase: igt/kms_vblank Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 14 Mar, 2017 13 commits
-
-
Daniel Vetter authored
I want to split up a few more things and document some details better (like how exactly to subclass drm_atomic_state). And maybe also split up the helpers a bit per-topic, but this should be a ok-ish start for better atomic overview. v2: Spelling and clarifications (Eric). v3: Implement suggestion from Gabriel to fix the graph. v4: Review from Laurent. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302151638.1882-6-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Resulted in confusion a few times in the past. v2: Spelling fix (Eric). Cc: Eric Anholt <eric@anholt.net> Acked-by:
-
Daniel Vetter authored
First overview text (if there is any), then headers (since generally you want to start out with the data structures), then all the other stuff with functions. Most of this is pre-shpinx, since with the old docbook only the overview stuff was pulled in directly. Everything else was put in a per-section index, so include order didn't really matter. Acked-by:
-
Daniel Vetter authored
Oh, the shiny and pretties! v2: Review from Laurent. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
-
git://git.lwn.net/linuxDaniel Vetter authored
Pointer for Markus's image conversion work. We need this so we can merge all the pretty drm graphs for 4.12. Signed-off-by: -
Daniel Vetter authored
Sadly there's only 1 driver which can use it, everyone else is special for some reason: - gma500 has a horrible runtime PM ioctl wrapper that probably doesn't really work but meh. - i915 needs special compat_ioctl handler because regrets. - arcgpu needs to fixup the pgprot because (no idea why it can't do that in the fault handler like everyone else). - tegra does even worse stuff with pgprot - udl does something with vm_flags too ... - cma helpers, etnaviv, mtk, msm, rockchip, omap all implement some variation on prefaulting. - exynos is exynos, I got lost in the midlayers. - vc4 has to reinvent half of cma helpers because those are too much midlayer, plus vm_flags dances. - vgem also seems unhappy with the default vm_flags. So pretty sad divergence and I'm sure we could do better, but not really an idea. Oh well, maybe this macro here helps to encourage more consistency at least going forward. Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Daniel Vetter authored
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
-
Daniel Vetter authored
I didn't spot anything that would require ordering here (well not anywhere else either), and I'm trying to unify at least modern drivers on one close hook. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniel Vetter authored
Well, mostly drm_file.h, and clean up all related things: - I didnt' figure out the difference between preclose and postclose. The existing explanation in drm-internals.rst didn't convince me, since it's also really outdated - we clean up pending DRM events in the core nowadays. I put a FIXME in for the future. - Another FIXME is to have a macro for default fops. - Lots of links all around, main areas are to tie the overview in drm_file.c more into the callbacks in struct drm_device, and the other is to link render/primary node code to the right sections in drm-uapi.rst. - Also moved the open/close stuff to drm_drv.h from drm-internals.rst, seems like the better place for that information. Since that section was rather outdated this amounted to full-on rewrite. A big missing piece here is some overview graph, but I think better to wait with that one until drm_device and drm_driver are also fully documented. v2: Nits from Sean. Reviewed-by:
-
Daniel Vetter authored
We might as well dump the drm_file pointer, that's about as useful a cookie as the pid. Noticed while typing docs for drm_file and friends. Since the only consumer of this is the tracepoints I think we can safely change this - those tracepoints should not be uapi relevant at all. It all goes back to commit b9c2c9ae Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Jul 1 16:48:09 2010 -0700 drm: add per-event vblank event trace points which doesn't give a special justification for using pid over a pointer. Also note that the nouveau code setting it is entirely pointless: Since this isn't a vblank event, it will never hit the vblank tracepoints. Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
-
Dan Carpenter authored
My static checker complains that "release" is uninitialized if qxl_alloc_release_reserved() fails, so let's add a check for that. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170314075410.GB5984@mwandaSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gerd Hoffmann authored
kmem_cache_alloc returns NULL on error, not ERR_PTR. Fixes: f5985bf9Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
kbuild test robot authored
drivers/gpu/drm/tinydrm/mipi-dbi.c:657:2-3: Unneeded semicolon drivers/gpu/drm/tinydrm/mipi-dbi.c:593:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
- 13 Mar, 2017 3 commits
-
-
Chris Zhong authored
In order to analyze some video config failed, add some useful printouts. Signed-off-by:
Chris Zhong <zyw@rock-chips.com> Signed-off-by:
-
Chris Zhong authored
Correct some DP register address for PHY Configuration according to latest datasheet. Signed-off-by:
-
Chris Zhong authored
The clk_get_rate return 0 if something goes wrong, so it can never be less then zero, the ret should be set a error code, otherwise the cdn_dp_clk_enable will return 0 when it failed at clk_get_rate. In addition, clk_get_rate() returns an "unsigned long", so use "unsigned long" instead of "u32" is better. Signed-off-by:
-
- 11 Mar, 2017 1 commit
-
-
git://linuxtv.org/pinchartl/mediaDaniel Vetter authored
Merge Laurent's drm_platform removal code. Only conflict is with the drm_pci.h extraction, which allows me to fix up the misplayed drm_platform_init fumble that 0day and Stephen Rothwell reported. Signed-off-by:
-
- 10 Mar, 2017 10 commits
-
-
Laurent Pinchart authored
The driver is already made of 5 separate source files. Move it to a newly created directory named synopsys where more Synopsys bridge drivers can be added later (for the DisplayPort controller for instance). Suggested-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-10-laurent.pinchart+renesas@ideasonboard.com
-
Neil Armstrong authored
The Synopsys Designware HDMI TX Controller does not enforce register access on platforms instanciating it. The current driver supports two different types of memory-mapped flat register access, but in order to support the Amlogic Meson SoCs integration, and provide a more generic way to handle all sorts of register mapping, switch the register access to use the regmap infrastructure. In the case of registers that are not flat memory-mapped or do not conform to the current driver implementation, a regmap struct can be given in the plat_data and be used at probe or bind. Since the AHB audio driver is only available with direct memory access, only allow the I2S audio driver to be registered is directly memory-mapped. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
Kieran Bingham authored
The device type isn't used anymore now that workarounds and PHY-specific operations are performed based on version information read at runtime. Remove it. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Kieran Bingham authored
The DWC HDMI TX controller interfaces with a companion PHY. While Synopsys provides multiple standard PHYs, SoC vendors can also integrate a custom PHY. Modularize PHY configuration to support vendor PHYs through platform data. The existing PHY configuration code was originally written to support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC MLP PHY. The HDMI 2.0 PHY will require a separate configuration function. Signed-off-by:
-
Laurent Pinchart authored
The HDMI TX controller support different PHYs whose programming interface can vary significantly, especially with vendor PHYs that are not provided by Synopsys. To support them, create a PHY operation structure that can be provided by the platform glue layer. The existing PHY handling code (limited to Synopsys PHY support) is refactored into a set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Signed-off-by:
-
Laurent Pinchart authored
When powering the PHY up we need to wait for the PLL to lock. This is done by polling the TX_PHY_LOCK bit in the HDMI_PHY_STAT0 register (interrupt-based wait could be implemented as well but is likely overkill). The bit is asserted when the PLL locks, but the current code incorrectly waits for the bit to be deasserted. Fix it, and while at it, replace the udelay() with a sleep as the code never runs in non-sleepable context. To be consistent with the power down implementation move the poll loop to the power off function. Signed-off-by:
-
Laurent Pinchart authored
The PHY requires us to wait for the PHY to switch to low power mode after deasserting TXPWRON and before asserting PDDQ in the power down sequence, otherwise power down will fail. The PHY power down can be monitored though the TX_READY bit, available through I2C in the PHY registers, or the TX_PHY_LOCK bit, available through the HDMI TX registers. As the two are equivalent, let's pick the easier solution of polling the TX_PHY_LOCK bit. The power down code is currently duplicated in multiple places. To avoid spreading multiple calls to a TX_PHY_LOCK poll function, we have to refactor the power down code and group it all in a single function. Tests showed that one poll iteration was enough for TX_PHY_LOCK to become low, without requiring any additional delay. Retrying the read five times with a 1ms to 2ms delay between each attempt should thus be more than enough. Signed-off-by:
-
Neil Armstrong authored
If the input pixel format is not RGB, the CSC must be enabled in order to provide valid pixel to DVI sinks. This patch removes the hdmi only dependency on the CSC enabling. Reviewed-by:
-
Laurent Pinchart authored
The color space converter isn't part of the PHY, move its configuration out of PHY code. Signed-off-by:
-
Laurent Pinchart authored
Most of the hdmi_phy_test_*() functions are unused. Remove them. Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Signed-off-by:
-
- 09 Mar, 2017 8 commits
-
-
Daniel Vetter authored
I'm torn on whether drm_minor really should be here or somewhere else. Maybe with more clarity after untangling drmP.h more this is easier to decide, for now I've put a FIXME comment right next to it. Right now we need struct drm_minor for the inline drm_file type helpers, and so it does kinda make sense to have them here. Next patch will kerneldoc-ify the entire pile. Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by:
-
Daniel Vetter authored
This was originally added by David Herrmann for range checks, but entirely unused. It confused me, so let's remove it. Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Daniel Vetter authored
It's not just file ops, but drm_file stuff in general. This is prep work to extracting a drm_file.h header in the next patch. Reviewed-by:
-
Daniel Vetter authored
Worst case if the hw can't support completion signalling in a race-free way we want the event to be too late, not too early. Text adapted from a proposal from Laurent - the other side of how to make hw work correctly where it's possible is imo already sufficiently documented. v2: Review from Laurent. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Daniel Vetter authored
An easy one as a drive-by. Reviewed-by:
-
Daniel Vetter authored
Just another step in finally making drmP.h obsolete. Reviewed-by:
-
Daniel Vetter authored
And remove the semi-kernel-doc stuff, to make sure no one uses this. Reviewed-by:
-
Daniel Vetter authored
Plus a little bit more documentation. v2: Untangle the missing forward decls to make drm_prime|gem.h free-standing. Reviewed-by:
-
