- 10 Jul, 2020 13 commits
-
-
Roi Dayan authored
Before this commit, on ft flush, ft entries were not removed from the ct_tuple hashtables. Fix it. Fixes: ac991b48 ("net/mlx5e: CT: Offload established flows") Signed-off-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Eli Britstein <elibr@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Saeed Mahameed authored
"flow" parameter is not used in __mlx5_tc_ct_flow_offload_clear(), remove it. Signed-off-by:
-
Saeed Mahameed authored
Instead of having to deal with converting between int and ERR_PTR for return values in mlx5_tc_ct_flow_offload(), make the internal helper functions return a ptr to mlx5_flow_handle instead of passing it as output param, this will also avoid gcc confusion and false alarms, thus we remove the redundant ERR_PTR rule initialization. Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Reviewed-by:
-
Paul Blakey authored
Reg_c1 is 32 bits wide. Originally, 24 bit were allocated for the tuple_id, 6 bits for tunnel mapping and 2 bits for tunnel options mappings. Restoring the ct state from zone lookup instead of tuple id requires reg_c1 to store 8 bits mapping the ct zone, leaving 24 bits for tunnel mappings. Expand tunnel and tunnel options register mappings to 12 bit each. Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Oz Shlomo <ozsh@mellanox.com> Signed-off-by:
-
Paul Blakey authored
Use a single byte mapping for zone restore register (zone matching remains 16 bit). This makes room for using the freed 8 bits on register C1 for mapping more tunnels and tunnel options. Signed-off-by:
-
Paul Blakey authored
After removing the tupleid register which changed per tuple, tuple modify headers set the ct_state, zone, mark, and label registers. For non-natted tuples going through the same tc rules path, their values will be the same, and all their modify headers will be the same. Re-use tuple modify header when possible, by adding each new modify header to an hahstable, and looking up identical ones before creating a new one. Signed-off-by:
-
Paul Blakey authored
Refactor sharing of mod headers to new file and while there, remove spin lock and flows list, as this is only used for warn on. Use the generic API in the next patch to re-use tuple modify headers for identical modify actions, Signed-off-by:
-
Paul Blakey authored
Remove tupleid, and replace it with zone_restore, which is the zone an established tuple sets after match. On miss, Use this zone + tuple taken from the skb, to lookup the ct entry and restore it. This improves flow insertion rate by avoiding the allocation of a header rewrite context. Signed-off-by:
-
Paul Blakey authored
Next patches will remove the tupleid registers that is used to restore the ct state on miss, and instead use the tuple on the missed packet to lookup which state to restore. Disable tuple rewrites after connection tracking. For tuple rewrites, inject a ct_state=-trk match so it won't change the tuple for established flows (+trk) that passed connection tracking, and instead miss to software. Signed-off-by:
-
Oz Shlomo authored
The next patch will pass the mlx5e_priv struct to the modify_header_match_supported method. Use this opportunity to refactor the existing pr_info call to a netdev_info call. Signed-off-by:
-
Paul Blakey authored
With ct clear we don't jump to the ct tables, so header rewrite of 5-tuple can be done in place (and not moved to after the CT action). Check for ct clear action, and if so, allow 5-tuple header rewrite. Signed-off-by:
-
Paul Blakey authored
Save original tuple and natted tuple in two new hashtables. This is a pre-step for restoring ct state after hw miss by performing a 5-tuple lookup on the hash tables. Signed-off-by:
-
Parav Pandit authored
When eswitch is unsupported, currently -EPERM error code is returned instead of -EOPNOTSUPP. Due to this VF device's devlink virtual port is not enumerated because port_function_get() callback returned -EPERM instead of -EOPNOTSUPP. Hence, return the error code -EOPNOTSUPP when eswitch is unsupported. Fixes: bd939753 ("net/mlx5: E-switch, Introduce and use eswitch support check helper") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
-
- 09 Jul, 2020 18 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== Expose port split attributes Danielle says: Currently, user space has no way of knowing if a port can be split and into how many ports. Among other things, this makes it impossible to write generic tests for port split functionality. Therefore, this set exposes two new devlink port attributes to user space: Number of lanes and whether the port can be split or not. Patch set overview: Patches #1-#4 cleanup 'struct devlink_port_attrs' and reduce the number of parameters passed between drivers and devlink via devlink_port_attrs_set() Patch #5 adds devlink port lanes attributes Patches #6-#7 add devlink port splittable attribute Patch #8 exploits the fact that devlink is now aware of port's number of lanes and whether the port can be split or not and moves some checks from drivers to devlink Patch #9 adds a port split test Changes since v2: * Remove some local variables from patch #3 * Reword function description in patch #5 * Fix a bug in patch #8 * Add a test for the splittable attribute in patch #9 Changes since v1: * Rename 'width' attribute to 'lanes' * Add 'splittable' attribute * Move checks from drivers to devlink ==================== Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Danielle Ratson authored
Test port split configuration using previously added number of port lanes attribute. Check that all the splittable ports are successfully split to their maximum number of lanes and below, and that those which are not splittable fail to be split. Test output example: TEST: swp4 is unsplittable [ OK ] TEST: split port swp53 into 4 [ OK ] TEST: Unsplit port pci/0000:03:00.0/25 [ OK ] TEST: split port swp53 into 2 [ OK ] TEST: Unsplit port pci/0000:03:00.0/25 [ OK ] Signed-off-by:
Danielle Ratson <danieller@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Danielle Ratson authored
Currently, all the input checks are done in driver. After adding the split capability to devlink port, move the checks to devlink. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Danielle Ratson authored
Add a new attribute that indicates the split ability of devlink port. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. Signed-off-by:
-
Danielle Ratson authored
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the split ability of the port as well, based on port_mapping->width field and split attribute of devlink port in spectrum, so that it could be easily passed to devlink in the next patch. Signed-off-by:
-
Danielle Ratson authored
Add a new devlink port attribute that indicates the port's number of lanes. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. The attribute is not passed to user space in case the number of lanes is invalid (0). Signed-off-by:
-
Danielle Ratson authored
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the number of lanes of the port as well so that it could be easily passed to devlink in the next patch. Signed-off-by:
-
Danielle Ratson authored
Currently, devlink_port_attrs_set accepts a long list of parameters, that most of them are devlink port's attributes. Use the devlink_port_attrs struct to replace the relevant parameters. Signed-off-by:
-
Danielle Ratson authored
The struct devlink_port_attrs holds the attributes of devlink_port. Similarly to the previous patch, 'switch_port' attribute is another exception. Move 'switch_port' to be devlink_port's field. Signed-off-by:
-
Danielle Ratson authored
The struct devlink_port_attrs holds the attributes of devlink_port. The 'set' field is not devlink_port's attribute as opposed to most of the others. Move 'set' to be devlink_port's field called 'attrs_set'. Signed-off-by:
-
kernel test robot authored
drivers/net/phy/mscc/mscc_ptp.c:1496:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: 7d272e63 ("net: phy: mscc: timestamping and PHC support") CC: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Colin Ian King authored
Currently the u16 skb->vlan_tci is being right shifted twice by VLAN_PRIO_SHIFT, once in the macro skb_vlan_tag_get_pri and explicitly by VLAN_PRIO_SHIFT afterwards. The combined shift amount is larger than the u16 so the end result is always zero. Remove the second explicit shift as this is extraneous. Fixes: 6e9fdb60 ("net: systemport: Add support for VLAN transmit acceleration") Addresses-Coverity: ("Operands don't affect result") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== mptcp: introduce msk diag interface This series implements the diag interface for the MPTCP sockets. Since the MPTCP protocol value can't be represented with the current diag uAPI, the first patch introduces an extended attribute allowing user-space to specify lager protocol values. The token APIs are then extended to allow traversing the whole token container. Patch 3 carries the actual diag interface implementation, and later patch bring-in some functional self-tests. ==================== Signed-off-by: -
Paolo Abeni authored
basic functional test, triggering the msk diag interface code. Require appropriate iproute2 support, skip elsewhere. Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
exposes basic inet socket attribute, plus some MPTCP socket fields comprising PM status and MPTCP-level sequence numbers. Reviewed-by:
-
Paolo Abeni authored
mptcp_token_iter_next() allow traversing all the MPTCP sockets inside the token container belonging to the given network namespace with a quite standard iterator semantic. That will be used by the next patch, but keep the API generic, as we plan to use this later for PM's sake. Additionally export mptcp_token_get_sock(), as it also will be used by the diag module. Reviewed-by:
-
Paolo Abeni authored
After commit bf976514 ("sock: Make sk_protocol a 16-bit value") the current size of 'sdiag_protocol' is not sufficient to represent the possible protocol values. This change introduces a new inet diag request attribute to let user space specify the relevant protocol number using u32 values. The attribute is parsed by inet diag core on get/dump command and the extended protocol value, if available, is preferred to 'sdiag_protocol' to lookup the diag handler. The parse attributed are exposed to all the diag handlers via the cb->data. Note that inet_diag_dump_one_icsk() is left unmodified, as it will not be used by protocol using the extended attribute. Suggested-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Xu Wang authored
This patch is to use eth_broadcast_addr() to assign broadcast address insetad of memset(). Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
- 08 Jul, 2020 9 commits
-
-
Jarod Wilson authored
The bond_ipsec_* helpers don't need RTNL, and can potentially get called without it being held, so switch from rtnl_dereference() to rcu_dereference() to access bond struct data. Lightly tested with xfrm bonding, no problems found, should address the syzkaller bug referenced below. Reported-by: syzbot+582c98032903dcc04816@syzkaller.appspotmail.com CC: Huy Nguyen <huyn@mellanox.com> CC: Saeed Mahameed <saeedm@mellanox.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Fabio Estevam authored
DP83869 is an Ethernet PHY, not a charger, so fix the documentation accordingly. Fixes: 4d66c56f ("dt-bindings: net: dp83869: Add TI dp83869 phy") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Fabio Estevam authored
DP83867 is an Ethernet PHY, not a charger, so fix the documentation accordingly. Fixes: 74ac28f1 ("dt-bindings: dp83867: Convert DP83867 to yaml") Signed-off-by:
-
Jarod Wilson authored
It's possible that device removal happens when the bond is in non-AB mode, and addition happens in AB mode, so bond_ipsec_del_sa() never gets called, which leaves security associations in an odd state if bond_ipsec_add_sa() then gets called after switching the bond into AB. Just call add and delete universally for all modes to keep things consistent. However, it's also possible that this code gets called when the system is shutting down, and the xfrm subsystem has already been disconnected from the bond device, so we need to do some error-checking and bail, lest we hit a null ptr deref. Fixes: a3b658cf ("bonding: allow xfrm offload setup post-module-load") CC: Huy Nguyen <huyn@mellanox.com> CC: Saeed Mahameed <saeedm@mellanox.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org Signed-off-by:
-
David S. Miller authored
Linus Walleij says: ==================== RTL8366RB tagging support This patch set adds DSA tagging support to the RTL8366RB DSA driver. There is a minor performance improvement in the tag parser compared to the previous patch set and the review tags have been collected. ==================== Signed-off-by: -
Linus Walleij authored
This activates the support to use the CPU tag to properly direct ingress traffic to the right port. Bit 15 in register RTL8368RB_CPU_CTRL_REG can be set to 1 to disable the insertion of the CPU tag which is what the code currently does. The bit 15 define calls this setting RTL8368RB_CPU_INSTAG which is confusing since the inverse meaning is implied: programmers may think that setting this bit to 1 will *enable* inserting the tag rather than disabling it, so rename this setting in bit 15 to RTL8368RB_CPU_NO_TAG which is more to the point. After this e.g. ping works out-of-the-box with the RTL8366RB. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
This implements the known parts of the Realtek 4 byte tag protocol version 0xA, as found in the RTL8366RB DSA switch. It is designated as protocol version 0xA as a different Realtek 4 byte tag format with protocol version 0x9 is known to exist in the Realtek RTL8306 chips. The tag and switch chip lacks public documentation, so the tag format has been reverse-engineered from packet dumps. As only ingress traffic has been available for analysis an egress tag has not been possible to develop (even using educated guesses about bit fields) so this is as far as it gets. It is not known if the switch even supports egress tagging. Excessive attempts to figure out the egress tag format was made. When nothing else worked, I just tried all bit combinations with 0xannp where a is protocol and p is port. I looped through all values several times trying to get a response from ping, without any positive result. Using just these ingress tags however, the switch functionality is vastly improved and the packets find their way into the destination port without any tricky VLAN configuration. On the D-Link DIR-685 the LAN ports now come up and respond to ping without any command line configuration so this is a real improvement for users. Egress packets need to be restricted to the proper target ports using VLAN, which the RTL8366RB DSA switch driver already sets up. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by:
-
Meir Lichtinger authored
This patch exposes new link modes using 100Gbps per lane, including 100G, 200G and 400G modes. Signed-off-by:
Meir Lichtinger <meirl@mellanox.com> Reviewed-by:
Aya Levin <ayal@mellanox.com> Signed-off-by:
-
Meir Lichtinger authored
Define 100G, 200G and 400G link modes using 100Gbps per lane LR, ER and FR are defined as a single link mode because they are using same technology and by design are fully interoperable. EEPROM content indicates if the module is LR, ER, or FR, and the user space ethtool decoder is planned to support decoding these modes in the EEPROM. Signed-off-by:
-
