This function prototype is not implemented nor referenced in the
brcmfmac driver so it has been removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Code cleanup. Prefixed functions with brcmf_ for unique namespace. In addition
to that, prefix has been changed to categorize functions depending on their
place in the drivers SDIO stack.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The brcmfmac driver contained functions for wireless extensions
support. However, brcmfmac is intended to be a cfg80211 driver
so all the entire source file is obsolete.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The calls in dhd_sdio.c to bcmsdh_recv_buf() function passed a wrong
handle. The parameter in the function prototype was typed as void
pointer so compiler could not detect. This patch makes the type
explicit and fixes the calls to the function.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The structure of the function made it difficult to understand, so reorganize it
to make it clearer.
Reported-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

kfree(NULL) is safe, and the rest of the cleanup should be done regardless
to make sure the state is consistent.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

wlc_phy_shared_detach() is an unnecessary level of indirection to just
call kfree(), so replace the function with kfree().
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Debug printk() call was missing KERN_DEBUG facility level.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Cleanup remaining whitespace errors:
	- space before tabs
	- spaces at the start of a line
	- space between function name and open parenthesis '('
	- unnecessary whitespace before a quoted newline
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Used scripts/cleanfile to remove assorted whitespace errors.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

brcm80211/brcmfmac/README contents were move to brcm80211/README previously,
but this empty file is still around.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The 'if' is unnecessary, since no action is taken as a result of the test.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Code cleanup. BCM4321 is not supported by this driver. Removed 'XXX' in
comments since they do not signal a critical issue to be patched. Removed
FIXME in comment since it signalled a problem in the Minstrel algorithm,
not in our driver.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Code still contained a 'FIXME' label that said tx status feedback (consumed by
the rate control algorithm) was not yet taking RTS/CTS into account.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

AP advertizes max AMPDU rx length in beacon/probe response frame. Code now
uses this information to limit the length of AMPDU frames it transmits.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IEEE80211_AMPDU_TX_OPERATIONAL provides a BA window size parameter. Code
is now using this parameter to restrict the amount of outstanding tx
AMPDUs.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The source file wl_iw.c is primarily intended to provide wireless
extensions functionality, which is to be removed from the driver.
The assert function is moved to another source file.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cfg80211 module is always favorite for the brcmfmac driver so the
macro is not needed to know the answer.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The macro definition DRV_MODULE_NAME has exactly the same value as
KBUILD_MODNAME so using that instead now.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The macro definition FOREACH_AS_STA does an assignment inside the
if condition, which is considered a checkpatch error. It has been
removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The driver contained several code paths specific to running the
driver against a simulated chip. This is not needed and removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The source file pmu.c contained a large number of definitions that
are no longer needed and have been removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The pmu source file contains several code fragments for chipsets that
are not supported by this driver. These have been removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

For the devices supported by brcmsmac driver the OTP device is always
powered. Functions for reading power status and changing it are not
needed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

the phy sources contained some code fragments for chipsets that are not
supported by this driver, which have been removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The brcmsmac driver code contains code fragments for chipsets that are not
supported. These have been removed from the brcmsmac source files.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

aiutils.c and pcicfg.h are no longer needed by fullmac
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Move sdio specific tx queue lock codes to dhd_sdio.c for fullmac
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove empty lock functions for sdio rx queue
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Unused sdtx lock functions are removed from dhd_linux.c
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The source file srom.c used meaningless non-zero numbers to return
upon error conditions. These have been replaced by linux error codes.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The error handling code labelled with errout: did a conditional kfree(). The
last error jump to the label is upon failure of the kmalloc() for which the
conditional kfree() is done. Therefor, the kfree is moved before the error
label and done unconditionally.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The function initvars_srom_pci() has fallback to obtain drivers settings
from flash when no srom device is present. However, this driver does not
support flash so the fallback code can be removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

'WL_STATUS_CONNECTING' status bit is  set at appropriate step in bss/ibss
connect requests.
Signed-off-by: Sukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The file types.h contains several occurrences of the checkpatch
error "(foo*)" should be "(foo *)". This has been fixed in this
patch.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Commit b287db11 ("se401: remove last V4L1 driver")
removed the files, remove the entry.

cc: Hans Verkuil <hverkuil@xs4all.nl>
cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>