- 08 Nov, 2011 8 commits
-
-
Peter De Schrijver authored
add support for conexant PCI device 0x36c. Seems to be fully compatible with the currently supported chips, yet the chip has different PCI ID. Signed-off-by:
Peter De Schrijver <p2@psychaos.be> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Peter De Schrijver authored
The following patch adds support for the Tongwei Video Technology TD-3116 board. This is a Bt878 based capture card with 16 inputs meant for surveilance applications. It also offers a way to check which inputs have a video signal while capturing another input. In addition there are a number of alarm inputs and outputs available and there is microcontroller which is presumably intended for use as a system watchdog. None of these extra capabilities are supported by the patch. Signed-off-by:
-
Malcolm Priestley authored
IT9135 devices do support USB 1. Support added with restricton on pid count to 5. IT9137 devices wil not connect in USB 1 mode. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Javier Martinez Canillas authored
64933337 [media] tvp5150: Add video format registers configuration values Added constants for each video standard supported by TVP5150, so this patch get rid of the magic numbers. Signed-off-by:
Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by:
-
Kamil Debski authored
G2D is a 2D graphics accelerator engine present in the s5p family of Samsung SoCs. It is capable of bitblt and raster operations on images having dimensions of up to 8000x8000. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Michael Krufky authored
Reported-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Reported-by:
-
Michael Krufky authored
Reported-by:
-
- 07 Nov, 2011 29 commits
-
-
Josh Boyer authored
The ttusb2_msg function uses on-stack variables to submit commands to dvb_usb_generic. This eventually gets to the DMA api layer and will throw a traceback if the debugging options are set. This allocates the temporary buffer variables with kzalloc instead. Fixes https://bugzilla.redhat.com/show_bug.cgi?id=734506Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
tvboxspy authored
Amend adc table entries and size. Signed-off-by:
-
Malcolm Priestley authored
Support for version 2 type chips and other LNA versions of version 1 Scripts may be compressed slightly at a later stage. TODO Firmware loader However, things are a little confusing, it is not clear that dvb-usb-it9137-01.fw does not work with version 2 chips as in recent files both firmwares are the same. Should be applied to: 8133 Support for single ITE 9135 device. Signed-off-by:
-
Michael Krufky authored
As done first in lgdt330x.c, calculate signal strength from SNR up to 35dB Even though the SNR can go higher than 35dB, there is some comfort factor in having a range of strong signals that can show at 100% Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Michael Krufky authored
As done first in lgdt330x.c, calculate signal strength from SNR up to 35dB Even though the SNR can go higher than 35dB, there is some comfort factor in having a range of strong signals that can show at 100% Signed-off-by:
-
Michael Krufky authored
As done first in lgdt330x.c, calculate signal strength from SNR up to 35dB Even though the SNR can go higher than 35dB, there is some comfort factor in having a range of strong signals that can show at 100% Signed-off-by:
-
Julia Lawall authored
In the original code, probe_out could be reached when res was null and then when the irq had not yet been requested. In those cases, the call to free_irq is not needed, so move probe_out down and introduce a new label for the case where calling free_irq is useful. The semantic match that finds this problem is as follows: // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by:Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
The variable isi might be null or might be freed at the point of the call to clk_put. pclk contains the value that isi->pclk is expected to point to. The semantic match that finds this problem is as follows: // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: -
Christian Gmeiner authored
The ADV7170/ADV7171 can operate in either 8-bit or 16-bit YCrCb Mode. * 8-Bit YCrCb Mode This default mode accepts multiplexed YCrCb inputs through the P7-P0 pixel inputs. The inputs follow the sequence Cb0, Y0 Cr0, Y1 Cb1, Y2, etc. The Y, Cb and Cr data are input on a rising clock edge. * 16-Bit YCrCb Mode This mode accepts Y inputs through the P7–P0 pixel inputs and multiplexed CrCb inputs through the P15–P8 pixel inputs. The data is loaded on every second rising edge of CLOCK. The inputs follow the sequence Cb0, Y0 Cr0, Y1 Cb1, Y2, etc. Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by:
-
Dmitri Belimov authored
Write AUX byte to FM1216ME_MK3 when FM mode, better sensitivity. It can be usefull for other tuners. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Daniel Drake authored
The RGB mode does not work correctly. It captures fine at 640x480 but whenever the scaling engine is used to produce another resolution, color corruption occurs (lots of erroneous pink and green). It is not clear how the scaling engine is supposed to work and how it knows which pixel format it is dealing with. Work around this problem by disabling RGB support. YUYV scaling works just fine. Test case: gst-launch v4l2src ! video/x-raw-rgb,bpp=16,width=320,height=240 ! \ ffmpegcolorspace ! xvimagesink Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Re-run the cardlist script, in order to update the cardlists for a few drivers, to sync with the driver changes. Signed-off-by: -
sensoray-dev authored
commit affebd4db94b459f676a14d9bb696c3c2b73643d [media] bttv: adding Sensoray 611 board to bttv driver Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
-
sensoray-dev authored
commit cf5886c3dd2f65c817cb6ca5e7202fa3a3bdc872 Signed-off-by:
-
Laurent Pinchart authored
The MT9P031 and MT9T001 sensors transfer 16-bit data on the I2C bus in swapped order. Let the I2C core handle byte order by using the i2c_smbus_{read|write}_word_swapped() functions. Signed-off-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Archit Taneja authored
There is no limit to the number of displays that can registered with DSS2. The current value of MAX_DISPLAYS is 3, set this to 10 so that the 'displays' member of omap2video_device struct can store more omap_dss_device pointers. This fixes a crash seen in omap_vout_probe when DSS2 registers for more than 3 displays. Signed-off-by:
Archit Taneja <archit@ti.com> Acked-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Archit Taneja authored
Add support for DSI panels. DSI video mode panels will work directly. For command mode panels, we will need to trigger updates regularly. This isn't done by the omap_vout driver currently. It can still be supported if we connect a framebuffer device to the panel and configure it in auto update mode. Signed-off-by:
-
Archit Taneja authored
Currently, in omap_vout_isr(), if the panel type is DPI, and if we get either VSYNC or VSYNC2 interrupts, we proceed ahead to set the current buffers state to VIDEOBUF_DONE and prepare to display the next frame in the queue. On OMAP4, because we have 2 LCD managers, the panel type itself is not sufficient to tell if we have received the correct irq, i.e, we shouldn't proceed ahead if we get a VSYNC interrupt for LCD2 manager, or a VSYNC2 interrupt for LCD manager. Fix this by correlating LCD manager to VSYNC interrupt and LCD2 manager to VSYNC2 interrupt. Signed-off-by:
Sumit Semwal <sumit.semwal@ti.com> Acked-by:
-
Archit Taneja authored
Currently, there is a lot of redundant code is between DPI and VENC panels, this can be made common by moving out field/interlace specific code to a separate function called omapvid_handle_interlace_display(). There is no functional change made. Signed-off-by:
-
Archit Taneja authored
The commit 383e4f69 makes reqbuf prevent requesting a larger size buffer than what is allocated at kernel boot during omap_vout_probe. In omap_vout_buffer_setup callback API, the requested size is compared with vout->buffer_size, this isn't correct as vout->buffer_size is later set to the size requested in reqbuf. When the video device is opened the next time, this check will prevent us to allocate a buffer which is larger than what we requested the last time. Don't use vout->buffer_size, always check with the parameters video1_bufsize or video2_bufsize. Signed-off-by:
-
Jonathan Cameron authored
Function ensures that error codes don't get mangled. Dependant on: which is working it's way through the i2c tree. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
DNOD44CDH086A (NXP TDA18212) tuner module is not connected to demodulator I2C gate. Instead demodulator gate it uses external GPIO driven gate. Override demodulator I2C gate control with own in that case. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Hans Verkuil authored
The Makefile used := instead of +=, this broke the compatibility build. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
This header clashes with the jpeg.h in gspca when doing a compatibility build using the media_build system. Signed-off-by:
-
- 03 Nov, 2011 3 commits
-
-
Timo Kokkonen authored
If the said config optio is not set, the compiler will spill out many warnings about statements with no effect, such as: Casting the zero to void will cure the warning. Signed-off-by:
Timo Kokkonen <kaapeli@itanic.dy.fi> Signed-off-by:
-
Malcolm Priestley authored
Support for single ITE 9135 device. Only single devices have been tested. Dual ITE 9135 devices should work, but have not been tested. TODOs support for ver 2 chip config for other tuner types. rework of firmware file. Signed-off-by:
-
Teka authored
Hi, This is a little patch to support Terratec G1 (based on Terratec Grabby). It works perfectly on my pc (Ubuntu 11.04 / Kernel 2.6.38). Best regards, Signed-off-by:
-
