Merge tag 'soc-fsl-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.10

Fix various compile warnings and static analysis warnings for:
- QBMan driver
- DPIO driver
- QE driver

* tag 'soc-fsl-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  soc: fsl: dpio: remove set but not used 'addr_cena'
  soc: fsl: qbman: Fix return value on success
  soc: fsl: qman: fix -Wpacked-not-aligned warnings

Link: https://lore.kernel.org/r/20200923224416.25788-1-leoyang.li@nxp.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.10:

- Use dev_err_probe() to simplify error handling for i.MX GPCv2 driver.
- Add a check in i.MX SCU power domain driver to ignore the power
  domains that are not owned by the current partition.

* tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  firmware: imx: scu-pd: ignore power domain not owned
  soc: imx: gpcv2: Use dev_err_probe() to simplify error handling

Link: https://lore.kernel.org/r/20200923073009.23678-1-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-drivers-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers

One small style fix for the Allwinner SRAM driver

* tag 'sunxi-drivers-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  soc: sunxi: sram: remove unneeded semicolon

Link: https://lore.kernel.org/r/175d36ad-bc98-4d5d-b035-ce467e932248.lettre@localhostSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'drivers_soc_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers

ARM: soc: TI driver updates for v5.10

Consist of:
 - Add Ring accelerator support for AM65x
 - Add TI PRUSS platform driver and enable it on available platforms
 - Extend PRUSS driver for CORECLK_MUX/IEPCLK_MUX support
 - UDMA rx ring pair fix
 - Add socinfo entry for J7200

* tag 'drivers_soc_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  Add missing '#' to fix schema errors:
  soc: ti: Convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: ti: k3-udma-glue: Fix parameters for rx ring pair request
  soc: ti: k3-socinfo: Add entry for J7200
  soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX
  dt-bindings: soc: ti: Update TI PRUSS bindings regarding clock-muxes
  firmware: ti_sci: allow frequency change for disabled clocks by default
  soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 J721E SoCs
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs
  soc: ti: pruss: Add support for PRU-ICSS subsystems on 66AK2G SoC
  soc: ti: pruss: Add support for PRU-ICSS subsystems on AM57xx SoCs
  soc: ti: pruss: Add support for PRU-ICSSs on AM437x SoCs
  soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
  dt-bindings: soc: ti: Add TI PRUSS bindings
  bindings: soc: ti: soc: ringacc: remove ti,dma-ring-reset-quirk
  soc: ti: k3: ringacc: add am65x sr2.0 support

Link: https://lore.kernel.org/r/1600656828-29267-1-git-send-email-santosh.shilimkar@oracle.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

firmware: tegra: Changes for v5.10-rc1

This is a minor change that implements a BPMP workaround for pre-silicon
platforms and is needed to enable support for BPMP on Tegra234.

* tag 'tegra-for-5.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: Enable BPMP support on Tegra234

Link: https://lore.kernel.org/r/20200918150303.3938852-3-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

soc/tegra: Changes for v5.10-rc1

These changes contain a bit of cleanup and chip support for the upcoming
Tegra234 SoC.

* tag 'tegra-for-5.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Add Tegra234 support
  soc/tegra: pmc: Reorder reset sources/levels definitions
  soc/tegra: misc: Add Tegra234 support
  soc/tegra: fuse: Add Tegra234 support
  soc/tegra: fuse: Implement tegra_is_silicon()
  soc/tegra: fuse: Extract tegra_get_platform()

Link: https://lore.kernel.org/r/20200918150303.3938852-2-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers

Simplify tee_device_register() and friends

Uses cdev_device_add() instead of the cdev_add() device_add()
combination.

Initializes dev->groups instead of direct calls to sysfs_create_group()
and friends.

* tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
  tee: avoid explicit sysfs_create/delete_group by initialising dev->groups
  tee: replace cdev_add + device_add with cdev_device_add

Link: https://lore.kernel.org/r/20200918144130.GB1219771@jadeSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers

Renesas driver updates for v5.10 (take two)

  - Add core support for the R-Car V3U (R8A779A0) SoC, including System
    Controller (SYSC) and Reset (RST) support,
  - Various Kconfig cleanups.

* tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: r8a779a0-sysc: Add r8a779a0 support
  soc: renesas: rcar-rst: Add support for R-Car V3U
  soc: renesas: Identify R-Car V3U
  soc: renesas: Sort driver description title
  soc: renesas: Use ARM32/ARM64 for menu description
  dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions
  dt-bindings: power: Add r8a779a0 SYSC power domain definitions

Link: https://lore.kernel.org/r/20200918124800.15555-4-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Fix smatch warning:

drivers/soc/fsl/qe/ucc.c:526
 ucc_set_tdm_rxtx_clk() warn: unsigned 'tdm_num' is never less than zero.

'tdm_num' is u32 type, never less than zero.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

This addresses the following gcc warning with "make W=1":

drivers/soc/fsl/dpio/qbman-portal.c: In function
‘qbman_swp_enqueue_multiple_direct’:
drivers/soc/fsl/dpio/qbman-portal.c:650:11: warning: variable
‘addr_cena’ set but not used [-Wunused-but-set-variable]
  650 |  uint64_t addr_cena;
      |           ^~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

On error the function was meant to return -ERRNO.  This also fixes
compile warning:

  drivers/soc/fsl/qbman/bman.c:640:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]

Fixes: 0505d00c ("soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

This fixes compile warnings from the -Wpacked-not-aligned option.

In file included from ../drivers/crypto/caam/qi.c:12:
../include/soc/fsl/qman.h:259:1: warning: alignment 1 of ‘struct qm_dqrr_entry’ is less than 8 [-Wpacked-not-aligned]
 } __packed;
 ^
../include/soc/fsl/qman.h:292:2: warning: alignment 1 of ‘struct <anonymous>’ is less than 8 [-Wpacked-not-aligned]
  } __packed ern;
  ^
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

  $id: 'http://devicetree.org/schemas/soc/ti/ti,pruss.yaml' does not match
'http://devicetree.org/schemas/.*\\.yaml#'
  $schema: 'http://devicetree.org/meta-schemas/core.yaml' is not one of
['http://devicetree.org/meta-schemas/core.yaml#',
'http://devicetree.org/meta-schemas/base.yaml#']
  Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml: ignoring,
error in schema: $id

Fixes: bd691ce0 ("dt-bindings: soc: ti: Add TI PRUSS bindings")
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

Enable support for the BPMP on Tegra234 to avoid relying on Tegra194
being enabled to pull in the needed OF device ID table entry.

On simulation platforms the BPMP hasn't booted up yet by the time we
probe the BPMP driver and the BPMP hasn't had a chance to mark the
doorbell as ringable by the CCPLEX. This corresponding check in the
BPMP driver will therefore fail. Work around this by disabling the
check on simulation platforms.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The PMC block is largely similar to that found on earlier chips, but
not completely compatible. Allow binding to the instantiation found on
Tegra234.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Move the definitions of reset sources and levels into a more natural
location.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The MISC block is largely similar to that found on earlier chips, but
not completely compatible. Allow binding to the instantiation found on
Tegra234.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add support for FUSE block found on the Tegra234 SoC, which is largely
similar to the IP found on previous generations.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This function can be used by drivers to determine whether code is
running on silicon or on a simulation platform.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This function extracts the PRE_SI_PLATFORM field from the HIDREV
register and can be used to determine which platform the kernel runs on
(silicon, simulation, ...). Note that while only Tegra194 and later
define this field, it should be safe to call this on prior generations
as well since this field should read as 0, indicating silicon.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

If the dev->groups is initialised, the sysfs group is created as part
of device_add call. There is no need to call sysfs_create/delete_group
explicitly.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Commit 233ed09d ("chardev: add helper function to register char devs
with a struct device") added a helper function 'cdev_device_add'.

Make use of cdev_device_add in tee_device_register to replace cdev_add
and device_add. Since cdev_device_add takes care of setting the
kobj->parent, drop explicit initialisation in tee_device_alloc.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Add support for R-Car V3U (R8A779A0) SoC power areas and register
access, because register specification differs from R-Car Gen2/3.

Inspired by patches in the BSP by Tho Vu.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1599810232-29035-5-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge tag 'scmi-updates-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers

ARM SCMI updates for v5.10

Couple of main additions: SCMI system protocol support and ability to
build SCMI driver as a single module which is needed by some transports
like virtio as they may not be ready early during the boot. This also
includes constification of scmi ops and related function pointers.

* tag 'scmi-updates-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Enable building as a single module
  firmware: arm_scmi: Move scmi protocols registration into the driver
  firmware: arm_scmi: Move scmi bus init and exit calls into the driver
  firmware: smccc: Export both smccc functions
  firmware: arm_scmi: Fix NULL pointer dereference in mailbox_chan_free
  firmware: arm_scmi: Add SCMI device for system power protocol
  firmware: arm_scmi: Add system power protocol support
  firmware: arm_scmi: Constify static scmi-ops
  firmware: arm_scmi: Constify ops pointers in scmi_handle
  cpufreq: arm_scmi: Constify scmi_perf_ops pointers

Link: https://lore.kernel.org/r/20200914075018.2rvytvghxyutcbk4@bogusSigned-off-by: Olof Johansson <olof@lixom.net>

Now, with all the plumbing in place to enable building scmi as a module
instead of built-in modules, let us enable the same.

Link: https://lore.kernel.org/r/20200907195046.56615-5-sudeep.holla@arm.comTested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

In preparation to enable building SCMI as a single module, let us move
the SCMI protocol registration call into the driver. This enables us
to also add unregistration of the SCMI protocols.

The main reason for this is to keep it simple instead of maintaining
it as separate modules and dealing with all possible initcall races
and deferred probe handling. We can move it as separate modules if
needed in future.

Link: https://lore.kernel.org/r/20200907195046.56615-4-sudeep.holla@arm.comTested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

In preparation to enable building scmi as a single module, let us move
the scmi bus {de-,}initialisation call into the driver.

The main reason for this is to keep it simple instead of maintaining
it as separate modules and dealing with all possible initcall races
and deferred probe handling. We can move it as separate modules if
needed in future.

Link: https://lore.kernel.org/r/20200907195046.56615-3-sudeep.holla@arm.comTested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

We need to export both arm_smccc_1_1_get_conduit and arm_smccc_get_version
to allow several modules make use of them. Arm FFA, Arm SCMI and PTP
drivers are few drivers that are planning to use these functions.

Let us export them in preparation to add support for SCMI as module.

Link: https://lore.kernel.org/r/20200907195046.56615-2-sudeep.holla@arm.comSigned-off-by: Sudeep Holla <sudeep.holla@arm.com>

This pull request contains Broadcom SoCs drivers changes for 5.10,
please pull the following:

- Alvaro adds support for the BCM63xx (DSL) SoCs power domain controller
  and adds support for the 6318, 6328, 6362, 63268.

- Florian adds support for tuning the Bus Interface Unit on 72164 and
  72165, enables the Brahma-B53 and Cortex-A72 read-ahead cache for the
  64-bit capable ARCH_BRCMSTB platforms, and finally updates the GISB
  driver to support breakpoint notifications.

* tag 'arm-soc/for-5.10/drivers' of https://github.com/Broadcom/stblinux:
  bus: brcmstb_gisb: Add support for breakpoint interrupts
  dt-bindings: bus: Document breakpoint interrupt for gisb-arb
  soc: bcm: brcmstb: biuctrl: Change RAC data line prefetching after 4 consecutive lines
  soc: bcm: brcmstb: biuctrl: Change RAC prefetch distance from +/-1 to +/- 2
  soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72165
  soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72164
  MIPS: BMIPS: dts: add BCM63268 power domain support
  MIPS: BMIPS: dts: add BCM6362 power domain support
  MIPS: BMIPS: dts: add BCM6328 power domain support
  soc: bcm: add BCM63xx power domain driver
  MIPS: BMIPS: add BCM6318 power domain definitions
  MIPS: BMIPS: add BCM63268 power domain definitions
  MIPS: BMIPS: add BCM6362 power domain definitions
  MIPS: BMIPS: add BCM6328 power domain definitions
  dt-bindings: soc: brcm: add BCM63xx power domain binding
  soc: bcm: brcmstb: biuctrl: Enable Read-ahead cache
  bus: brcmstb_gisb: Shorten prints

Link: https://lore.kernel.org/r/20200912032153.1216354-3-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'memory-controller-drv-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.10

1. Fixes in several drivers for GCC warnings, including kerneldoc fixes
   and issues discovered while compile testing.
2. Enable compile testing of most of the drivers.
3. Use dev_err_probe() to simplify the code.
4. omap-gpmc: fix off by one errors, code cleanups and improvements.
5. tegra: remove the GPU from DRM IOMMU group so it would use its own;
   few minor fixes.
6. brcmstb_dpfe: fix memory leak and array index out of bounds.

* tag 'memory-controller-drv-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (26 commits)
  memory: fsl-corenet-cf: Fix handling of platform_get_irq() error
  memory: omap-gpmc: Fix -Wunused-function warnings
  memory: tegra: Remove GPU from DRM IOMMU group
  memory: tegra186-emc: Simplify with dev_err_probe()
  memory: brcmstb_dpfe: Simplify with dev_err_probe()
  memory: samsung: exynos5422-dmc: add missing and fix kerneldoc
  memory: samsung: exynos5422-dmc: remove unused exynos5_dmc members
  memory: samsung: exynos5422-dmc: rename timing register fields variables
  memory: emif: Remove bogus debugfs error handling
  memory: omap-gpmc: Fix build error without CONFIG_OF
  memory: omap-gpmc: Fix a couple off by ones
  memory: brcmstb_dpfe: fix array index out of bounds
  memory: brcmstb_dpfe: Fix memory leak
  memory: tegra: Correct shift value of apew
  memory: Enable compile testing for most of the drivers
  memory: brcmstb_dpfe: add separate entry for compile test
  memory: tegra: tegra210-emc: fix indentation
  memory: renesas-rpc-if: simplify with PTR_ERR_OR_ZERO
  memory: omap-gpmc: consistently use !res for NULL checks
  memory: omap-gpmc: use WARN() instead of BUG() on wrong free
  ...

Link: https://lore.kernel.org/r/20200907150611.11267-1-krzk@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-drivers-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers

Renesas driver updates for v5.10

  - Improve visual Kconfig structure.

* tag 'renesas-drivers-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: Align driver description titles
  soc: renesas: Use menu for Renesas SoC

Link: https://lore.kernel.org/r/20200904114819.30254-4-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'optee-i2c-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers

Make sure I2C functions used in OP-TEE are reachable with IS_REACHABLE()

* tag 'optee-i2c-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
  drivers: optee: fix i2c build issue

Link: https://lore.kernel.org/r/20200901101806.GA3286324@jadeSigned-off-by: Olof Johansson <olof@lixom.net>

Should not register power domain that not owned by current
partition.

Alought power domains will not be registered when power on failure,
we have to let CPU waste more cycles.

Whether power on or owned check, both need communicate with SCU,
but with owned check, we no need to run more code path to save CPU
cycles.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The original commit mixed up the forward and completion ring IDs for the
rx flow configuration.
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Fixes: 4927b1ab ("dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

Update K3 chipinfo driver to support new TI J7200 SoC.
It's JTAG PARTNO is 0xBB6D.
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

The IEPCLK_MUX is present on all SoCs whereas the CORECLK_MUX is present
only on AM65x SoCs and J721E. Add support for both these CLK muxes.

This allows the clock rates and clock parents for these to be controlled
through DT leveraging the clk infrastructure for configuring the default
parents and rates.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

ICSS/ICSSG modules have an IEP clock mux that allow selection of
internal IEP clock from 2 clock sources.

ICSSG module has a CORE clock mux that allows selection of internal CORE
clock from 2 clock sources.

Add binding information for these 2 clock muxes.
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>