- 23 Dec, 2018 30 commits
-
-
Eric Biggers authored
Remove dead code related to internal IV generators, which are no longer used since they've been replaced with the "seqiv" and "echainiv" templates. The removed code includes: - The "givcipher" (GIVCIPHER) algorithm type. No algorithms are registered with this type anymore, so it's unneeded. - The "const char *geniv" member of aead_alg, ablkcipher_alg, and blkcipher_alg. A few algorithms still set this, but it isn't used anymore except to show via /proc/crypto and CRYPTO_MSG_GETALG. Just hardcode "<default>" or "<none>" in those cases. - The 'skcipher_givcrypt_request' structure, which is never used. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
Fixes: cf718eaa ("crypto: cavium/nitrox - Enabled Mailbox support") Signed-off-by:
-
Eric Biggers authored
salsa20-generic doesn't use SIMD instructions or otherwise disable preemption, so passing atomic=true to skcipher_walk_virt() is unnecessary. Signed-off-by:
-
Eric Biggers authored
skcipher_walk_virt() can still sleep even with atomic=true, since that only affects the later calls to skcipher_walk_done(). But, skcipher_walk_virt() only has to allocate memory for some input data layouts, so incorrectly calling it with preemption disabled can go undetected. Use might_sleep() so that it's detected reliably. Signed-off-by:
-
Eric Biggers authored
Passing atomic=true to skcipher_walk_virt() only makes the later skcipher_walk_done() calls use atomic memory allocations, not skcipher_walk_virt() itself. Thus, we have to move it outside of the preemption-disabled region (kernel_fpu_begin()/kernel_fpu_end()). (skcipher_walk_virt() only allocates memory for certain layouts of the input scatterlist, hence why I didn't notice this earlier...) Reported-by: syzbot+9bf843c33f782d73ae7d@syzkaller.appspotmail.com Fixes: 4af78261 ("crypto: x86/chacha20 - add XChaCha20 support") Signed-off-by:
-
Nagadheeraj Rottela authored
Added support to offload AEAD ciphers to NITROX. Currently supported AEAD cipher is 'gcm(aes)'. Signed-off-by:
Nagadheeraj Rottela <rnagadheeraj@marvell.com> Reviewed-by:
Srikanth Jampala <jsrikanth@marvell.com> Signed-off-by:
-
Fabio Estevam authored
The following build warnings are seen when building for ARM64 allmodconfig: drivers/crypto/mxc-scc.c:181:20: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] drivers/crypto/mxc-scc.c:186:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] drivers/crypto/mxc-scc.c:277:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=] drivers/crypto/mxc-scc.c:339:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/crypto/mxc-scc.c:340:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Fix them by using the %zu specifier to print a size_t variable and using a plain %x to print the result of a readl(). Signed-off-by:Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Corentin Labbe authored
This patchs adds missing member of stats documentation. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Corentin Labbe authored
This patch removes unused dump functions for crypto_user_stats. There are remains of the copy/paste of crypto_user_base to crypto_user_stat and I forgot to remove them. Signed-off-by:
-
Harsh Jain authored
Fix error counter increment in AEAD decrypt operation when validation of tag is done in Driver instead of H/W. Signed-off-by:
Harsh Jain <harsh@chelsio.com> Signed-off-by:
-
Harsh Jain authored
Reset the counters on receiving detach from Cxgb4. Signed-off-by:
Atul Gupta <atul.gupta@chelsio.com> Signed-off-by:
-
Harsh Jain authored
chcr receives "CXGB4_STATE_DETACH" event on PCI Shutdown. Wait for processing of inflight request and Mark the device unavailable. Signed-off-by:
-
Harsh Jain authored
Send dma address as value to function arguments instead of pointer. Signed-off-by:
-
Harsh Jain authored
Use tx_channel_id instead of rx_channel_id. Signed-off-by:
-
Harsh Jain authored
Send input as IV | AAD | Data. It will allow sending IV as Immediate Data and Creates space in Work request to add more dma mapped entries. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/crypto/chelsio/chcr_ipsec.c: In function 'chcr_ipsec_xmit': drivers/crypto/chelsio/chcr_ipsec.c:674:33: warning: variable 'kctx_len' set but not used [-Wunused-but-set-variable] unsigned int flits = 0, ndesc, kctx_len; It not used since commit 8362ea16 ("crypto: chcr - ESN for Inline IPSec Tx") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another: drivers/crypto/ux500/hash/hash_core.c:169:4: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT); ^~~~~~~~~ 1 warning generated. dmaengine_prep_slave_sg expects an enum from dma_transfer_direction. We know that the only direction supported by this function is DMA_TO_DEVICE because of the check at the top of this function so we can just use the equivalent value from dma_transfer_direction. DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1 Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another: drivers/crypto/ux500/cryp/cryp_core.c:559:5: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] direction, DMA_CTRL_ACK); ^~~~~~~~~ drivers/crypto/ux500/cryp/cryp_core.c:583:5: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] direction, ^~~~~~~~~ 2 warnings generated. dmaengine_prep_slave_sg expects an enum from dma_transfer_direction. Because we know the value of the dma_data_direction enum from the switch statement, we can just use the proper value from dma_transfer_direction so there is no more conversion. DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1 DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2 Signed-off-by: -
Dave Watson authored
Add the appropriate scatter/gather stubs to the avx asm. In the C code, we can now always use crypt_by_sg, since both sse and asm code now support scatter/gather. Introduce a new struct, aesni_gcm_tfm, that is initialized on startup to point to either the SSE, AVX, or AVX2 versions of the four necessary encryption/decryption routines. GENX_OPTSIZE is still checked at the start of crypt_by_sg. The total size of the data is checked, since the additional overhead is in the init function, calculating additional HashKeys. Signed-off-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
-
Dave Watson authored
Before this diff, multiple calls to GCM_ENC_DEC will succeed, but only if all calls are a multiple of 16 bytes. Handle partial blocks at the start of GCM_ENC_DEC, and update aadhash as appropriate. The data offset %r11 is also updated after the partial block. Signed-off-by:
-
Dave Watson authored
Introduce READ_PARTIAL_BLOCK macro, and use it in the two existing partial block cases: AAD and the end of ENC_DEC. In particular, the ENC_DEC case should be faster, since we read by 8/4 bytes if possible. This macro will also be used to read partial blocks between enc_update and dec_update calls. Signed-off-by:
-
Dave Watson authored
Prepare to handle partial blocks between scatter/gather calls. For the last partial block, we only want to calculate the aadhash in GCM_COMPLETE, and a new partial block macro will handle both aadhash update and encrypting partial blocks between calls. Signed-off-by:
-
Dave Watson authored
Fill in aadhash, aadlen, pblocklen, curcount with appropriate values. pblocklen, aadhash, and pblockenckey are also updated at the end of each scatter/gather operation, to be carried over to the next operation. Signed-off-by:
-
Dave Watson authored
The precompute functions differ only by the sub-macros they call, merge them to a single macro. Later diffs add more code to fill in the gcm_context_data structure, this allows changes in a single place. Signed-off-by:
-
Dave Watson authored
AAD hash only needs to be calculated once for each scatter/gather operation. Move it to its own macro, and call it from GCM_INIT instead of INITIAL_BLOCKS. Signed-off-by:
-
Dave Watson authored
Merge encode and decode tag calculations in GCM_COMPLETE macro. Scatter/gather routines will call this once at the end of encryption or decryption. Signed-off-by:
-
Dave Watson authored
Add support for 192/256-bit keys using the avx gcm/aes routines. The sse routines were previously updated in e31ac32d (Add support for 192 & 256 bit keys to AESNI RFC4106). Instead of adding an additional loop in the hotpath as in e31ac32d, this diff instead generates separate versions of the code using macros, and the entry routines choose which version once. This results in a 5% performance improvement vs. adding a loop to the hot path. This is the same strategy chosen by the intel isa-l_crypto library. The key size checks are removed from the c code where appropriate. Note that this diff depends on using gcm_context_data - 256 bit keys require 16 HashKeys + 15 expanded keys, which is larger than struct crypto_aes_ctx, so they are stored in struct gcm_context_data. Signed-off-by:
-
Dave Watson authored
Macro-ify function save and restore. These will be used in new functions added for scatter/gather update operations. Signed-off-by:
-
Dave Watson authored
Add the gcm_context_data structure to the avx asm routines. This will be necessary to support both 256 bit keys and scatter/gather. The pre-computed HashKeys are now stored in the gcm_context_data struct, which is expanded to hold the greater number of hashkeys necessary for avx. Loads and stores to the new struct are always done unlaligned to avoid compiler issues, see e5b954e8 "Use unaligned loads from gcm_context_data" Signed-off-by:
-
Dave Watson authored
The GCM_ENC_DEC routines for AVX and AVX2 are identical, except they call separate sub-macros. Pass the macros as arguments, and merge them. This facilitates additional refactoring, by requiring changes in only one place. The GCM_ENC_DEC macro was moved above the CONFIG_AS_AVX* ifdefs, since it will be used by both AVX and AVX2. Signed-off-by:
-
- 13 Dec, 2018 10 commits
-
-
Eric Biggers authored
crypto_alg_mod_lookup() takes a reference to the hash algorithm but crypto_init_shash_spawn() doesn't take ownership of it, hence the reference needs to be dropped in adiantum_create(). Fixes: 059c2a4d ("crypto: adiantum - add Adiantum support") Signed-off-by:
-
Eric Biggers authored
CRYPTO_MSG_GETALG in NLM_F_DUMP mode sometimes doesn't return all registered crypto algorithms, because it doesn't support incremental dumps. crypto_dump_report() only permits itself to be called once, yet the netlink subsystem allocates at most ~64 KiB for the skb being dumped to. Thus only the first recvmsg() returns data, and it may only include a subset of the crypto algorithms even if the user buffer passed to recvmsg() is large enough to hold all of them. Fix this by using one of the arguments in the netlink_callback structure to keep track of the current position in the algorithm list. Then userspace can do multiple recvmsg() on the socket after sending the dump request. This is the way netlink dumps work elsewhere in the kernel; it's unclear why this was different (probably just an oversight). Also fix an integer overflow when calculating the dump buffer size hint. Fixes: a38f7907 ("crypto: Add userspace configuration API") Signed-off-by:
-
Eric Biggers authored
The 2018-11-28 revision of the Adiantum paper has revised some notation: - 'M' was replaced with 'L' (meaning "Left", for the left-hand part of the message) in the definition of Adiantum hashing, to avoid confusion with the full message - ε-almost-∆-universal is now abbreviated as ε-∆U instead of εA∆U - "block" is now used only to mean block cipher and Poly1305 blocks Also, Adiantum hashing was moved from the appendix to the main paper. To avoid confusion, update relevant comments in the code to match. Signed-off-by:
-
Eric Biggers authored
The kernel's ChaCha20 uses the RFC7539 convention of the nonce being 12 bytes rather than 8, so actually I only appended 12 random bytes (not 16) to its test vectors to form 24-byte nonces for the XChaCha20 test vectors. The other 4 bytes were just from zero-padding the stream position to 8 bytes. Fix the comments above the test vectors. Signed-off-by:
-
Eric Biggers authored
There is a draft specification for XChaCha20 being worked on. Add the XChaCha20 test vector from the appendix so that we can be extra sure the kernel's implementation is compatible. I also recomputed the ciphertext with XChaCha12 and added it there too, to keep the tests for XChaCha20 and XChaCha12 in sync. Signed-off-by:
-
Eric Biggers authored
To improve responsiveness, yield the FPU (temporarily re-enabling preemption) every 4 KiB encrypted/decrypted, rather than keeping preemption disabled during the entire encryption/decryption operation. Alternatively we could do this for every skcipher_walk step, but steps may be small in some cases, and yielding the FPU is expensive on x86. Suggested-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
-
Eric Biggers authored
Now that the x86_64 SIMD implementations of ChaCha20 and XChaCha20 have been refactored to support varying the number of rounds, add support for XChaCha12. This is identical to XChaCha20 except for the number of rounds, which is 12 instead of 20. This can be used by Adiantum. Reviewed-by:
-
Eric Biggers authored
In preparation for adding XChaCha12 support, rename/refactor the x86_64 SIMD implementations of ChaCha20 to support different numbers of rounds. Reviewed-by:
-
Eric Biggers authored
Add an XChaCha20 implementation that is hooked up to the x86_64 SIMD implementations of ChaCha20. This can be used by Adiantum. An SSSE3 implementation of single-block HChaCha20 is also added so that XChaCha20 can use it rather than the generic implementation. This required refactoring the ChaCha permutation into its own function. Signed-off-by:
-
Eric Biggers authored
Add a 64-bit AVX2 implementation of NHPoly1305, an ε-almost-∆-universal hash function used in the Adiantum encryption mode. For now, only the NH portion is actually AVX2-accelerated; the Poly1305 part is less performance-critical so is just implemented in C. Signed-off-by:
-
