7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
inadvertently changed which XDP mode is assumed when no mode flags are
specified explicitly. Previously, driver mode was preferred, if driver
supported it. If not, generic SKB mode was chosen. That commit changed default
to SKB mode always. This patch fixes the issue and restores the original
logic.

Fixes: 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/bpf/20200820052841.1559757-1-andriin@fb.com

Calling generic selftests "make install" fails as rsync expects all
files from TEST_GEN_PROGS to be present. The binary is not generated
anymore (commit 3b09d27c) so we can safely remove it from there
and also from gitignore.

Fixes: 3b09d27c ("selftests/bpf: Move test_align under test_progs")
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20200819160710.1345956-1-vkabatov@redhat.com

The data of compressed section should be aligned to 4
(for 32bit) or 8 (for 64 bit) bytes.

The binutils ld sets sh_addralign to 1, which makes libelf
fail with misaligned section error during the update as
reported by Jesper:

   FAILED elf_update(WRITE): invalid section alignment

While waiting for ld fix, we can fix compressed sections
sh_addralign value manually.

Adding warning in -vv mode when the fix is triggered:

  $ ./tools/bpf/resolve_btfids/resolve_btfids -vv vmlinux
  ...
  section(36) .comment, size 44, link 0, flags 30, type=1
  section(37) .debug_aranges, size 45684, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 16, expected 8
  section(38) .debug_info, size 129104957, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(39) .debug_abbrev, size 1152583, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(40) .debug_line, size 7374522, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(41) .debug_frame, size 702463, link 0, flags 800, type=1
  section(42) .debug_str, size 1017571, link 0, flags 830, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(43) .debug_loc, size 3019453, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(44) .debug_ranges, size 1744583, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 16, expected 8
  section(45) .symtab, size 2955888, link 46, flags 0, type=2
  section(46) .strtab, size 2613072, link 0, flags 0, type=3
  ...
  update ok for vmlinux

Another workaround is to disable compressed debug info data
CONFIG_DEBUG_INFO_COMPRESSED kernel option.

Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Nick Clifton <nickc@redhat.com>
Link: https://lore.kernel.org/bpf/20200819092342.259004-1-jolsa@kernel.org

The error message emitted by bpf_object__init_user_btf_maps() was using the
wrong section ID.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819110534.9058-1-toke@redhat.com

When the error code is EAGAIN, the kernel signals the user
space should retry the read() operation for bpf iterators.
Let us do it.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200818222312.2181675-1-yhs@fb.com

Currently when traversing all tasks, the next tid
is always increased by one. This may result in
visiting the same task multiple times in a
pid namespace.

This patch fixed the issue by seting the next
tid as pid_nr_ns(pid, ns) + 1, similar to
funciton next_tgid().
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/bpf/20200818222310.2181500-1-yhs@fb.com

In our production system, we observed rcu stalls when
'bpftool prog` is running.
  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
  \x09(t=21031 jiffies g=2534773 q=179750)
  NMI backtrace for cpu 7
  CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G        W         5.8.0-00004-g68bfc7f8c1b4 #6
  Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
  Call Trace:
  <IRQ>
  dump_stack+0x57/0x70
  nmi_cpu_backtrace.cold+0x14/0x53
  ? lapic_can_unplug_cpu.cold+0x39/0x39
  nmi_trigger_cpumask_backtrace+0xb7/0xc7
  rcu_dump_cpu_stacks+0xa2/0xd0
  rcu_sched_clock_irq.cold+0x1ff/0x3d9
  ? tick_nohz_handler+0x100/0x100
  update_process_times+0x5b/0x90
  tick_sched_timer+0x5e/0xf0
  __hrtimer_run_queues+0x12a/0x2a0
  hrtimer_interrupt+0x10e/0x280
  __sysvec_apic_timer_interrupt+0x51/0xe0
  asm_call_on_stack+0xf/0x20
  </IRQ>
  sysvec_apic_timer_interrupt+0x6f/0x80
  asm_sysvec_apic_timer_interrupt+0x12/0x20
  RIP: 0010:task_file_seq_get_next+0x71/0x220
  Code: 00 00 8b 53 1c 49 8b 7d 00 89 d6 48 8b 47 20 44 8b 18 41 39 d3 76 75 48 8b 4f 20 8b 01 39 d0 76 61 41 89 d1 49 39 c1 48 19 c0 <48> 8b 49 08 21 d0 48 8d 04 c1 4c 8b 08 4d 85 c9 74 46 49 8b 41 38
  RSP: 0018:ffffc90006223e10 EFLAGS: 00000297
  RAX: ffffffffffffffff RBX: ffff888f0d172388 RCX: ffff888c8c07c1c0
  RDX: 00000000000f017b RSI: 00000000000f017b RDI: ffff888c254702c0
  RBP: ffffc90006223e68 R08: ffff888be2a1c140 R09: 00000000000f017b
  R10: 0000000000000002 R11: 0000000000100000 R12: ffff888f23c24118
  R13: ffffc90006223e60 R14: ffffffff828509a0 R15: 00000000ffffffff
  task_file_seq_next+0x52/0xa0
  bpf_seq_read+0xb9/0x320
  vfs_read+0x9d/0x180
  ksys_read+0x5f/0xe0
  do_syscall_64+0x38/0x60
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f8815f4f76e
  Code: c0 e9 f6 fe ff ff 55 48 8d 3d 76 70 0a 00 48 89 e5 e8 36 06 02 00 66 0f 1f 44 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 52 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5
  RSP: 002b:00007fff8f9df578 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
  RAX: ffffffffffffffda RBX: 000000000170b9c0 RCX: 00007f8815f4f76e
  RDX: 0000000000001000 RSI: 00007fff8f9df5b0 RDI: 0000000000000007
  RBP: 00007fff8f9e05f0 R08: 0000000000000049 R09: 0000000000000010
  R10: 00007f881601fa40 R11: 0000000000000246 R12: 00007fff8f9e05a8
  R13: 00007fff8f9e05a8 R14: 0000000001917f90 R15: 000000000000e22e

Note that `bpftool prog` actually calls a task_file bpf iterator
program to establish an association between prog/map/link/btf anon
files and processes.

In the case where the above rcu stall occured, we had a process
having 1587 tasks and each task having roughly 81305 files.
This implied 129 million bpf prog invocations. Unfortunwtely none of
these files are prog/map/link/btf files so bpf iterator/prog needs
to traverse all these files and not able to return to user space
since there are no seq_file buffer overflow.

This patch fixed the issue in bpf_seq_read() to limit the number
of visited objects. If the maximum number of visited objects is
reached, no more objects will be visited in the current syscall.
If there is nothing written in the seq_file buffer, -EAGAIN will
return to the user so user can try again.

The maximum number of visited objects is set at 1 million.
In our Intel Xeon D-2191 2.3GHZ 18-core server, bpf_seq_read()
visiting 1 million files takes around 0.18 seconds.

We did not use cond_resched() since for some iterators, e.g.,
netlink iterator, where rcu read_lock critical section spans between
consecutive seq_ops->next(), which makes impossible to do cond_resched()
in the key while loop of function bpf_seq_read().
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/bpf/20200818222309.2181348-1-yhs@fb.com

On ppc64le we get the following warning:

  In file included from btf_dump.c:16:0:
  btf_dump.c: In function ‘btf_dump_emit_struct_def’:
  ../include/linux/kernel.h:20:17: error: comparison of distinct pointer types lacks a cast [-Werror]
    (void) (&_max1 == &_max2);  \
                   ^
  btf_dump.c:882:11: note: in expansion of macro ‘max’
      m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
             ^~~

Fix by explicitly casting to __s64, which is a return type from
btf__resolve_size().

Fixes: 702eddc7 ("libbpf: Handle GCC built-in types for Arm NEON")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818164456.1181661-1-andriin@fb.com

With latest `bpftool prog` command, we observed the following kernel
panic.
    BUG: kernel NULL pointer dereference, address: 0000000000000000
    #PF: supervisor instruction fetch in kernel mode
    #PF: error_code(0x0010) - not-present page
    PGD dfe894067 P4D dfe894067 PUD deb663067 PMD 0
    Oops: 0010 [#1] SMP
    CPU: 9 PID: 6023 ...
    RIP: 0010:0x0
    Code: Bad RIP value.
    RSP: 0000:ffffc900002b8f18 EFLAGS: 00010286
    RAX: ffff8883a405f400 RBX: ffff888e46a6bf00 RCX: 000000008020000c
    RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8883a405f400
    RBP: ffff888e46a6bf50 R08: 0000000000000000 R09: ffffffff81129600
    R10: ffff8883a405f300 R11: 0000160000000000 R12: 0000000000002710
    R13: 000000e9494b690c R14: 0000000000000202 R15: 0000000000000009
    FS:  00007fd9187fe700(0000) GS:ffff888e46a40000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffffffffffd6 CR3: 0000000de5d33002 CR4: 0000000000360ee0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     <IRQ>
     rcu_core+0x1a4/0x440
     __do_softirq+0xd3/0x2c8
     irq_exit+0x9d/0xa0
     smp_apic_timer_interrupt+0x68/0x120
     apic_timer_interrupt+0xf/0x20
     </IRQ>
    RIP: 0033:0x47ce80
    Code: Bad RIP value.
    RSP: 002b:00007fd9187fba40 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
    RAX: 0000000000000002 RBX: 00007fd931789160 RCX: 000000000000010c
    RDX: 00007fd9308cdfb4 RSI: 00007fd9308cdfb4 RDI: 00007ffedd1ea0a8
    RBP: 00007fd9187fbab0 R08: 000000000000000e R09: 000000000000002a
    R10: 0000000000480210 R11: 00007fd9187fc570 R12: 00007fd9316cc400
    R13: 0000000000000118 R14: 00007fd9308cdfb4 R15: 00007fd9317a9380

After further analysis, the bug is triggered by
Commit eaaacd23 ("bpf: Add task and task/file iterator targets")
which introduced task_file bpf iterator, which traverses all open file
descriptors for all tasks in the current namespace.
The latest `bpftool prog` calls a task_file bpf program to traverse
all files in the system in order to associate processes with progs/maps, etc.
When traversing files for a given task, rcu read_lock is taken to
access all files in a file_struct. But it used get_file() to grab
a file, which is not right. It is possible file->f_count is 0 and
get_file() will unconditionally increase it.
Later put_file() may cause all kind of issues with the above
as one of sympotoms.

The failure can be reproduced with the following steps in a few seconds:
    $ cat t.c
    #include <stdio.h>
    #include <sys/types.h>
    #include <sys/stat.h>
    #include <fcntl.h>
    #include <unistd.h>

    #define N 10000
    int fd[N];
    int main() {
      int i;

      for (i = 0; i < N; i++) {
        fd[i] = open("./note.txt", 'r');
        if (fd[i] < 0) {
           fprintf(stderr, "failed\n");
           return -1;
        }
      }
      for (i = 0; i < N; i++)
        close(fd[i]);

      return 0;
    }
    $ gcc -O2 t.c
    $ cat run.sh
    #/bin/bash
    for i in {1..100}
    do
      while true; do ./a.out; done &
    done
    $ ./run.sh
    $ while true; do bpftool prog >& /dev/null; done

This patch used get_file_rcu() which only grabs a file if the
file->f_count is not zero. This is to ensure the file pointer
is always valid. The above reproducer did not fail for more
than 30 minutes.

Fixes: eaaacd23 ("bpf: Add task and task/file iterator targets")
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/bpf/20200817174214.252601-1-yhs@fb.com

This reverts commit f8414a8d.

eth_type_trans() does the necessary pull on the skb.
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a kernel-doc warning for the pcs_config() function prototype:

../include/linux/phylink.h:406: warning: Excess function parameter 'permit_pause_to_mac' description in 'pcs_config'

Fixes: 7137e18f ("net: phylink: add struct phylink_pcs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

This fix wasn't correct: When this function is invoked from the
retransmission worker, the iterator contains garbage and resetting
it causes a crash.

As the work queue should not be performance critical also zero the
msghdr struct.

Fixes: 35759383 "(mptcp: sendmsg: reset iter on error)"
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is possible to trigger this WARN_ON from user space by triggering a
devlink snapshot with an ID which already exists. We don't need both
-EEXISTS being reported and spamming the kernel log.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using ipv6_dev_find() in one module, it requires ipv6 not to
work as a module. Otherwise, this error occurs in build:

  undefined reference to `ipv6_dev_find'.

So fix it by adding "depends on IPV6 || IPV6=n" to tipc/Kconfig,
as it does in sctp/Kconfig.

Fixes: 5a6f6f57 ("tipc: set ub->ifindex for local ipv6 address")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__tipc_nl_compat_dumpit() has two callers, and it expects them to
pass a valid nlmsghdr via arg->data. This header is artificial and
crafted just for __tipc_nl_compat_dumpit().

tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well
as some nested attribute, TIPC_NLA_SOCK. But the other caller
tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized
on this call path.

Fix this by just adding a similar nlmsghdr without any payload in
tipc_nl_compat_dumpit().

This bug exists since day 1, but the recent commit 6ea67769
("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it
easier to appear.

Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com
Fixes: d0796d1e ("tipc: convert legacy nl bearer dump to nl compat")
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Endianness issue in IPv4 option support in nft_exthdr,
   from Stephen Suryaputra.

2) Removes the waitcount optimization in nft_compat,
   from Florian Westphal.

3) Remove ipv6 -> nf_defrag_ipv6 module dependency, from
   Florian Westphal.

4) Memleak in chain binding support, also from Florian.

5) Simplify nft_flowtable.sh selftest, from Fabian Frederick.

6) Optional MTU arguments for selftest nft_flowtable.sh,
   also from Fabian.

7) Remove noise error report when killing process in
   selftest nft_flowtable.sh, from Fabian Frederick.

8) Reject bogus getsockopt option length in ebtables,
   from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.9-20200815' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2020-08-15

this is a pull request of 4 patches for net/master.

All patches are by Zhang Changzhong and fix broadcast related problems in the
j1939 CAN networking stack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So
we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or
we may access the wrong data.

Fixes: 0d5501c1 ("net: Always untag vlan-tagged traffic on input.")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an XDP program changes the ethernet header protocol field,
eth_type_trans is used to recalculate skb->protocol. In order for
eth_type_trans to work correctly, the ethernet header must actually be
part of the skb data segment, so the code first pushes that onto the
head of the skb. However, it subsequently forgets to pull it back off,
making the behavior of the passed-on packet inconsistent between the
protocol modifying case and the static protocol case. This patch fixes
the issue by simply pulling the ethernet header back off of the skb
head.

Fixes: 29724956 ("net: fix generic XDP to handle if eth header was mangled")
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose
NETIF_F_LLTX feature because of the incorrect handling of
features in ipvlan_fix_features().

--before--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Actual changes:
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: off [fixed]
lpaa10:~#

--after--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Could not change any device features
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~#

Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we tear down a network namespace, we unregister all
the netdevices within it. So we may queue a slave device
and a bonding device together in the same unregister queue.

If the only slave device is non-ethernet, it would
automatically unregister the bonding device as well. Thus,
we may end up unregistering the bonding device twice.

Workaround this special case by checking reg_state.

Fixes: 9b5e383c ("net: Introduce unregister_netdevice_many()")
Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side
the required time interval between packets of a multipacket broadcast message
is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin
allowing for the maximumm spacing of 200ms). For receive side a timeout will
occur when a time of greater than 750 ms elapsed between two message packets
when more packets were expected.

So this patch fix and add rxtimer for multipacket broadcast session.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.comAcked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart
rxtimer, and then calls __j1939_session_cancel() to set session->state =
J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the
J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call
j1939_session_deactivate_activate_next() to deactivate current session, and
rxtimer won't be set.

But for multipacket broadcast session, __j1939_session_cancel() don't set
session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be
deactivate and hrtimer_start() is called to start new rxtimer again and again.

So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if
(!j1939_cb_is_broadcast(&session->skcb)) statement.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.comAcked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message,
j1939_session_timers_cancel() should be called to cancel rxtimer.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.comAcked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously
set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus
multipacket broadcast message was aborted by receive side because it may come
from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv()
and j1939_xtp_rx_dat() didn't process broadcast message.

So fix it by checking and process broadcast message in j1939_tp_recv(),
j1939_tp_cmd_recv() and j1939_xtp_rx_dat().

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.comAcked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This variable is present in many source files and has not been used
anywhere (at least internally) since it was introduced.

Fixes the following W=1 kernel build warning(s):

 drivers/net/fddi/skfp/cfm.c: In function ‘cfm’:
 drivers/net/fddi/skfp/cfm.c:211:6: warning: variable ‘oldstate’ set but not used [-Wunused-but-set-variable]
 drivers/net/fddi/skfp/cfm.c:40:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

While we're at it, remove some code which has never been invoked.

Keep the comment though, as it seems potentially half useful.

Fixes the following W=1 kernel build warning(s):

 drivers/net/fddi/skfp/cfm.c: In function ‘cfm’:
 drivers/net/fddi/skfp/cfm.c:211:6: warning: variable ‘oldstate’ set but not used [-Wunused-but-set-variable]

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This variable is present in many source files and has not been used
anywhere (at least internally) since it was introduced.

Fixes the following W=1 kernel build warning(s):

 drivers/net/fddi/skfp/smt.c:24:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable 'smt_pdef' is only used if LITTLE_ENDIAN is set, so only
define it if this is the case.

Fixes the following W=1 kernel build warning(s):

 drivers/net/fddi/skfp/smt.c:1572:3: warning: ‘smt_pdef’ defined but not used [-Wunused-const-variable=]

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This variable is present in many source files and has not been used
anywhere (at least internally) since it was introduced.

Fixes the following W=1 kernel build warning(s):

 drivers/net/fddi/skfp/fplustm.c:25:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This variable is present in many source files and has not been used
anywhere (at least internally) since it was introduced.

Fixes the following W=1 kernel build warning(s):

 drivers/net/fddi/skfp/hwmtm.c:14:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following W=1 kernel build warning(s):

 drivers/net/wan/dlci.c: In function ‘dlci_close’:
 drivers/net/wan/dlci.c:298:8: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mike McLagan <mike.mclagan@linux.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following W=1 kernel build warning(s):

 drivers/net/ethernet/8390/axnet_cs.c:907: warning: Function parameter or member 'txqueue' not described in 'axnet_tx_timeout'

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Shannon Nelson <snelson@pensando.io>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: William Lee <william@asix.com.tw>
Cc: "A. Hinds --" <dahinds@users.sourceforge.net>
Cc: reached at <becker@scyld.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following W=1 kernel build warning(s):

 drivers/net/bonding/bond_alb.c:1222: warning: Function parameter or member 'bond' not described in 'alb_set_mac_address'

Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following W=1 kernel build warning(s):

 drivers/net/ethernet/3com/3c574_cs.c: In function ‘update_stats’:
 drivers/net/ethernet/3com/3c574_cs.c:954:9: warning: variable ‘tx’ set but not used [-Wunused-but-set-variable]
 954 | u8 rx, tx, up;
 | ^~
 drivers/net/ethernet/3com/3c574_cs.c:954:5: warning: variable ‘rx’ set but not used [-Wunused-but-set-variable]
 954 | u8 rx, tx, up;
 | ^~

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shannon Nelson <snelson@pensando.io>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Donald Becker <becker@scyld.com>
Cc: David Hinds <dahinds@users.sourceforge.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following W=1 kernel build warning(s):

 drivers/net/bonding/bond_main.c:329: warning: Function parameter or member 'proto' not described in 'bond_vlan_rx_add_vid'
 drivers/net/bonding/bond_main.c:362: warning: Function parameter or member 'proto' not described in 'bond_vlan_rx_kill_vid'
 drivers/net/bonding/bond_main.c:964: warning: Function parameter or member 'new_active' not described in 'bond_change_active_slave'
 drivers/net/bonding/bond_main.c:964: warning: Excess function parameter 'new' description in 'bond_change_active_slave'

Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Thomas Davis <tadavis@lbl.gov>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Renames and missing descriptions.

Fixes the following W=1 kernel build warning(s):

 drivers/net/bonding/bond_3ad.c:140: warning: Function parameter or member 'port' not described in '__get_first_agg'
 drivers/net/bonding/bond_3ad.c:140: warning: Excess function parameter 'bond' description in '__get_first_agg'
 drivers/net/bonding/bond_3ad.c:1655: warning: Function parameter or member 'agg' not described in 'ad_agg_selection_logic'
 drivers/net/bonding/bond_3ad.c:1655: warning: Excess function parameter 'aggregator' description in 'ad_agg_selection_logic'
 drivers/net/bonding/bond_3ad.c:1817: warning: Function parameter or member 'port' not described in 'ad_initialize_port'
 drivers/net/bonding/bond_3ad.c:1817: warning: Excess function parameter 'aggregator' description in 'ad_initialize_port'
 drivers/net/bonding/bond_3ad.c:1976: warning: Function parameter or member 'timeout' not described in 'bond_3ad_initiate_agg_selection'
 drivers/net/bonding/bond_3ad.c:2274: warning: Function parameter or member 'work' not described in 'bond_3ad_state_machine_handler'
 drivers/net/bonding/bond_3ad.c:2274: warning: Excess function parameter 'bond' description in 'bond_3ad_state_machine_handler'
 drivers/net/bonding/bond_3ad.c:2508: warning: Function parameter or member 'link' not described in 'bond_3ad_handle_link_change'
 drivers/net/bonding/bond_3ad.c:2508: warning: Excess function parameter 'status' description in 'bond_3ad_handle_link_change'
 drivers/net/bonding/bond_3ad.c:2566: warning: Function parameter or member 'bond' not described in 'bond_3ad_set_carrier'
 drivers/net/bonding/bond_3ad.c:2677: warning: Function parameter or member 'bond' not described in 'bond_3ad_update_lacp_rate'
 drivers/net/bonding/bond_3ad.c:1655: warning: Function parameter or member 'agg' not described in 'ad_agg_selection_logic'
 drivers/net/bonding/bond_3ad.c:1655: warning: Excess function parameter 'aggregator' description in 'ad_agg_selection_logic'
 drivers/net/bonding/bond_3ad.c:1817: warning: Function parameter or member 'port' not described in 'ad_initialize_port'
 drivers/net/bonding/bond_3ad.c:1817: warning: Excess function parameter 'aggregator' description in 'ad_initialize_port'
 drivers/net/bonding/bond_3ad.c:1976: warning: Function parameter or member 'timeout' not described in 'bond_3ad_initiate_agg_selection'
 drivers/net/bonding/bond_3ad.c:2274: warning: Function parameter or member 'work' not described in 'bond_3ad_state_machine_handler'
 drivers/net/bonding/bond_3ad.c:2274: warning: Excess function parameter 'bond' description in 'bond_3ad_state_machine_handler'
 drivers/net/bonding/bond_3ad.c:2508: warning: Function parameter or member 'link' not described in 'bond_3ad_handle_link_change'
 drivers/net/bonding/bond_3ad.c:2508: warning: Excess function parameter 'status' description in 'bond_3ad_handle_link_change'
 drivers/net/bonding/bond_3ad.c:2566: warning: Function parameter or member 'bond' not described in 'bond_3ad_set_carrier'
 drivers/net/bonding/bond_3ad.c:2677: warning: Function parameter or member 'bond' not described in 'bond_3ad_update_lacp_rate'

Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Added a skb->len check

This driver expects upper layers to include a pseudo header of 1 byte
when passing down a skb for transmission. This driver will read this
1-byte header. This patch added a skb->len check before reading the
header to make sure the header exists.

2. Added needed_headroom and set hard_header_len to 0

When this driver transmits data,
  first this driver will remove a pseudo header of 1 byte,
  then the lapb module will prepend the LAPB header of 2 or 3 bytes.
So the value of needed_headroom in this driver should be 3 - 1.

Because this driver has no header_ops, according to the logic of
af_packet.c, the value of hard_header_len should be 0.

Reason of setting needed_headroom and hard_header_len at this place:

This driver is written using the API of the hdlc module, the hdlc
module enables this driver (the protocol driver) to run on any hardware
that has a driver (the hardware driver) written using the API of the
hdlc module.

Two other hdlc protocol drivers - hdlc_ppp and hdlc_raw_eth, also set
things like hard_header_len at this place. In hdlc_ppp, it sets
hard_header_len after attach_hdlc_protocol and before setting dev->type.
In hdlc_raw_eth, it sets hard_header_len by calling ether_setup after
attach_hdlc_protocol and after memcpy the settings.

3. Reset needed_headroom when detaching protocols (in hdlc.c)

When detaching a protocol from a hardware device, the hdlc module will
reset various parameters of the device (including hard_header_len) to
the default values. We add needed_headroom here so that needed_headroom
will also be reset.

Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Broadcast mode bonds transmit a copy of all traffic simultaneously out of
all interfaces, so the "speed" of the bond isn't really the aggregate of
all interfaces, but rather, the speed of the slowest active interface.

Also, the type of the speed field is u32, not unsigned long, so adjust
that accordingly, as required to make min() function here without
complaining about mismatching types.

Fixes: bb5b052f ("bond: add support to read speed and duplex via ethtool")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2020-08-15

The following pull-request contains BPF updates for your *net* tree.

We've added 23 non-merge commits during the last 4 day(s) which contain
a total of 32 files changed, 421 insertions(+), 141 deletions(-).

The main changes are:

1) Fix sock_ops ctx access splat due to register override, from John Fastabend.

2) Batch of various fixes to libbpf, bpftool, and selftests when testing build
   in 32-bit mode, from Andrii Nakryiko.

3) Fix vmlinux.h generation on ARM by mapping GCC built-in types (__Poly*_t)
   to equivalent ones clang can work with, from Jean-Philippe Brucker.

4) Fix build_id lookup in bpf_get_stackid() helper by walking all NOTE ELF
   sections instead of just first, from Jiri Olsa.

5) Avoid use of __builtin_offsetof() in libbpf for CO-RE, from Yonghong Song.

6) Fix segfault in test_mmap due to inconsistent length params, from Jianlin Lv.

7) Don't override errno in libbpf when logging errors, from Toke Høiland-Jørgensen.

8) Fix v4_to_v6 sockaddr conversion in sk_lookup test, from Stanislav Fomichev.

9) Add link to bpf-helpers(7) man page to BPF doc, from Joe Stringer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>