- 05 Jul, 2013 3 commits
-
-
Dave Airlie authored
This just sets the qxl time on the drawables. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
This adds support for a default of 4 heads, with a command line parameter to change the default number. It also overhauls the modesetting code to handle this case properly, and send the correct things to the hardware at the right time. Signed-off-by: -
Dave Airlie authored
qxl has a feature to allow the userspace driver do arbitrary resizes when the viewer resizes, this fixes it by removing unnecessary code from the kernel side. Signed-off-by:
-
- 04 Jul, 2013 9 commits
-
-
Daniel Vetter authored
drm/i915 is the only user of the color allocation handling and switched to insert_node a while ago. So we can ditch this. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Seung-Woo Kim authored
seq of a trace point is unsigned int but print format was %d. So it fixes the format as %u. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
-
Seung-Woo Kim authored
There are missing parts to handle error in drm_open_helper(). The priv->minor, assigned by idr_find() which can return NULL, should be checked whether it is NULL or not before referencing it. put_pid(), drm_gem_release(), and drm_prime_destory_file_private() should be called when error happens after their pair functions are called. If an error occurs after executing dev->driver->open() which allocates driver specific per-file private data, then the private data should be released. Signed-off-by:
YoungJun Cho <yj44.cho@samsung.com> Signed-off-by:
-
Seung-Woo Kim authored
If raw_edid of drm_edid_block_vaild() is null, it will crash, so checking in bad label is removed and instead assertion is added at the top of the function. The type of return for the function is bool, so it fixes to return true and false instead of 1 and 0. Signed-off-by:
-
Shuah Khan authored
Convert drivers/gpu/drm class to use dev_pm_ops for power management and remove Legacy PM ops hooks. With this change, drm class registers suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy class->suspend/resume. When __device_suspend() runs call-backs, it will find class->pm ops for the drm class. drm_class_suspend() hook calls driver legacy ops with the state information. e.g: drm_class_suspend() calls into driver suspend routines via drm_dev->driver->suspend(drm_dev, state). Once drm_class_suspend() is converted to dev_pm_ops, it will no longer have access to pm_transition which it has to pass into driver legacy suspend calls. A new freeze and suspend hooks are added to address the not having access to the state information. The new freeze and suspend hooks simply call __drm_class_suspend() with the appropriate pm state information. __drm_class_suspend() is the original suspend hook with a new name. Signed-off-by:
Shuah Khan <shuah.kh@samsung.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2013-07-03' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Pile of fixes for 3.11. A bit large in patch count, but that's simply due to two fixes being split up into really small parts. Also I've included a few more vlv patches than I'd have included for other platforms. But since vlv is officially supported for the first time only in 3.11 that shouldn't result in unbearable risks. Highlights: - ghost eDP fixes for hsw from Paulo - fix PCH detection in virtualized enviroments (Rui Guo) - duct-tape dma sg construction when swiotlb is in use (Konrad), dupe with a patch in your drm-fixes branch - fix sdvo hotplug on i965g - tune down a bunch of dmesg ERRORs which can be hit under normal conditions - detect invalid pitches for tiled scanout buffers (Chris) - a pile of vlv fixes from Ville: rps improvements, fixes for the dpll LPF, fixup the sprite mmio offsets - fix context size on hsw (Ben) - locking fixes for the hotplug code, specifically the storm handling - fix get_config on CPT (Xiong Zhang) - Fix the domain tracking when an unlocked seqno wait was interrupt (Chris), this seems to explain tons of little corruption bugs in the ddx. Chris also added a nice igt to exercise this. - work around stack-corrupting vnsprintf in our error state dumper * tag 'drm-intel-fixes-2013-07-03' of git://people.freedesktop.org/~danvet/drm-intel: (39 commits) drm/i915: Don't try to tear down the stolen drm_mm if it's not there drm/i915: Break up the large vsnprintf() in print_error_buffers() drm/i915: Refactor the wait_rendering completion into a common routine drm/i915: Only clear write-domains after a successful wait-seqno drm/i915: correct intel_dp_get_config() function for DevCPT drm/i915: fix hpd interrupt register locking drm/i915: fold the no-irq check into intel_hpd_irq_handler drm/i915: fold the queue_work into intel_hpd_irq_handler drm/i915: fold the hpd_irq_setup call into intel_hpd_irq_handler drm/i915: s/hotplug_irq_storm_detect/intel_hpd_irq_handler/ drm/i915: close tiny race in the ilk pcu even interrupt setup drm/i915: fix locking around ironlake_enable|disable_display_irq drm/i915: Fix context sizes on HSW drm/i915: Fix VLV sprite register offsets Revert "drm/i915: Don't use the HDMI port color range bit on Valleyview" drm/i915: s/LFP/LPF in DPIO PLL register names drm/i915: Fix VLV PLL LPF coefficients for DAC drm/i915: Jump to at least RPe on VLV when increasing the GPU frequency drm/i915: Don't increase the GPU frequency from the delayed VLV rps timer drm/i915: GEN6_RP_INTERRUPT_LIMITS doesn't seem to exist on VLV ...
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A few more DPM fixes. * 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag drm/radeon/tn: disable PG when changing UVD clocks drm/radeon/sumo: disable PG when changing UVD clocks drm/radeon/aruba: disable additional rlc features drm/radeon: fix endian bug in radeon_atom_get_mclk_range_table() drm/radeon/dpm: fix compilation with certain versions of gcc drm/radeon/dpm: clarify debugfs warning
-
Daniel Vetter authored
The usual drm driver has tons of different drm_mm memory managers so the drm error message in dmesg is pretty useless. WARN instead so that we have the full backtrace. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Daniel Vetter authored
In commit 3a359f0b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Apr 20 12:08:11 2013 +0200 drm/mm: fix dump table BUG I've failed to fix both instances of the regression introduced in commit 9e8944ab Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Nov 15 11:32:17 2012 +0000 drm: Introduce an iterator over holes in the drm_mm range manager Patch this up in the same way by extracting the hole debug logic into it's own function, since that'll also clarify the logic a bit. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 03 Jul, 2013 6 commits
-
-
Daniel Vetter authored
In commit da34242e Author: YoungJun Cho <yj44.cho@samsung.com> Date: Wed Jun 26 10:21:42 2013 +0900 drm/prime: add return check for dma_buf_fd the failure case handling was fixed up. But in the case when we already had the buffer exported it changed the return value: Previously we've return 0 on success, now we return the fd. This ABI change has been caught by i-g-t/prime_self_import/with_one_bo. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66436 Cc: YoungJun Cho <yj44.cho@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Tested-by:
lu hua <huax.lu@intel.com> Signed-off-by:
-
Alex Deucher authored
Some asic revisions need to disable PG when UVD is active. Signed-off-by:Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Causes hangs for some people. Signed-off-by: -
Alex Deucher authored
Causes hangs for some people. Signed-off-by: -
Alex Deucher authored
They cause problems with dynamic clocking. Signed-off-by: -
Alex Deucher authored
Signed-off-by:
-
- 02 Jul, 2013 5 commits
-
-
Mike Lothian authored
Add #include <linux/seq_file.h> to *_dpm.c files Signed-off-by: -
Alex Deucher authored
For chips without debugfs dpm support say that it's not implemented rather than not supported to avoid confusion about DPM support in general. Signed-off-by: -
Daniel Vetter authored
Every other place properly checks whether we've managed to set up the stolen allocator at boot-up properly, with the exception of the cleanup code. Which results in an ugly *ERROR* Memory manager not clean. Delaying takedown at module unload time since the drm_mm isn't initialized at all. v2: While at it check whether the stolen drm_mm is initialized instead of the more obscure stolen_base == 0 check. v3: Fix up the logic. Also we need to keep the stolen_base check in i915_gem_object_create_stolen_for_preallocated since that can be called before stolen memory is fully set up. Spotted by Chris Wilson. v4: Readd the conversion in i915_gem_object_create_stolen_for_preallocated, the check is for the dev_priv->mm.gtt_space drm_mm, the stolen allocatot must already be initialized when calling that function (if we indeed have stolen memory). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65953 Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: lu hua <huax.lu@intel.com> (v3) Reviewed-by:
-
David Herrmann authored
There is no reason to return "int" as this function never fails. Furthermore, several drivers (ast, sis) already depend on this. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A few more patches for 3.11: - add debugfs interface to check current DPM state - Fix a bug that caused problems with DPM on BTC+ asics. * 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dpm: add debugfs support for SI drm/radeon/dpm: add debugfs support for cayman drm/radeon/dpm: add debugfs support for TN drm/radeon/dpm: add debugfs support for ON/LN drm/radeon/dpm: add debugfs support for 7xx/evergreen/btc drm/radeon/dpm: add debugfs support for rv6xx drm/radeon/dpm: add infrastructure to support debugfs info drm/radeon/dpm: re-enable state transitions for Cayman drm/radeon/dpm: re-enable state transitions for BTC drm/radeon: fix typo in radeon_atom_init_mc_reg_table() drm/radeon/atom: fix endian bug in radeon_atom_init_mc_reg_table() drm/radeon: remove sumo dpm/uvd bringup leftovers
-
- 01 Jul, 2013 17 commits
-
-
Alex Deucher authored
This allows you to look at the current DPM state via debugfs. Signed-off-by: -
Alex Deucher authored
This allows you to look at the current DPM state via debugfs. Signed-off-by: -
Alex Deucher authored
This allows you to look at the current DPM state via debugfs. Signed-off-by: -
Alex Deucher authored
This allows you to look at the current DPM state via debugfs. Signed-off-by: -
Alex Deucher authored
This allows you to look at the current DPM state via debugfs. Signed-off-by: -
Alex Deucher authored
This allows you to look at the current DPM state via debugfs. Signed-off-by: -
Alex Deucher authored
This lays the frameworks to report realtime power level feedback. Signed-off-by: -
Alex Deucher authored
Was disabled due to stability issues on certain boards caused by the a bug in the parsing of the atom mc reg tables. That's fixed now so re-enable. Signed-off-by: -
Alex Deucher authored
Was disabled due to stability issues on certain boards caused by the a bug in the parsing of the atom mc reg tables. That's fixed now so re-enable. Signed-off-by: -
Alex Deucher authored
Bad pointer math. Fixes hangs in state transitions with BTC+ asics. Signed-off-by: -
Alex Deucher authored
Signed-off-by: -
Alex Deucher authored
Function doesn't do anything useful. Signed-off-by: -
Chris Wilson authored
So it appears that I have encountered some bogosity when trying to call i915_error_printf() with many arguments from print_error_buffers(). The symptom is that the vsnprintf parser tries to interpret an integer arg as a character string, the resulting OOPS indicating stack corruption. Replacing the single call with its 13 format specifiers and arguments with multiple calls to i915_error_printf() worked fine. This patch goes one step further and introduced i915_error_puts() to pass the strings simply. It may not fix the root cause, but it does prevent my box from dying and I think helps make print_error_buffers() more friendly. Signed-off-by:
-
Chris Wilson authored
Harmonise the completion logic between the non-blocking and normal wait_rendering paths, and move that logic into a common function. In the process, we note that the last_write_seqno is by definition the earlier of the two read/write seqnos and so all successful waits will have passed the last_write_seqno. Therefore we can unconditionally clear the write seqno and its domains in the completion logic. v2: Add the missing ring parameter, because sometimes it is good to have things compile. Signed-off-by:
-
Chris Wilson authored
In the introduction of the non-blocking wait, I cut'n'pasted the wait completion code from normal locked path. Unfortunately, this neglected that the normal path returned early if the wait returned early. The result is that read-only waits may return whilst the GPU is still writing to the bo. Fixes regression from commit 3236f57a [v3.7] Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 24 09:35:09 2012 +0100 drm/i915: Use a non-blocking wait for set-to-domain ioctl Signed-off-by:
-
Xiong Zhang authored
On DevCPT, the control register for Transcoder DP Sync Polarity is TRANS_DP_CTL, not DP_CTL. Without this patch, Many call trace occur on CPT machine with DP monitor. The call trace is like: *ERROR* mismatch in adjusted_mode.flags(expected X,found X) v2: use intel-crtc to simple patch, suggested by Daniel. Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> [danvet: Extend the encoder->get_config comment to specify that we now also depend upon intel_encoder->base.crtc being correct. Also bikeshed s/intel_crtc/crtc/.] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65287Signed-off-by:
-
Daniel Vetter authored
Our interrupt handler (in hardirq context) could race with the timer (in softirq context), hence we need to hold the spinlock around the call to ->hdp_irq_setup in intel_hpd_irq_handler, too. But as an optimization (and more so to clarify things) we don't need to do the irqsave/restore dance in the hardirq context. Note also that on ilk+ the race isn't just against the hotplug reenable timer, but also against the fifo underrun reporting. That one also modifies the SDEIMR register (again protected by the same dev_priv->irq_lock). To lock things down again sprinkle a assert_spin_locked. But exclude the functions touching SDEIMR for now, I want to extract them all into a new helper function (like we do already for pipestate, display interrupts and all the various gt interrupts). v2: Add the missing 't' Egbert spotted in a comment. v3: Actually fix the right misspelled comment (Paulo). Cc: Egbert Eich <eich@suse.de> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
