- 04 Jan, 2020 40 commits
-
-
Eric Dumazet authored
commit 56042858 upstream. syzbot is kind enough to remind us we need to call skb_may_pull() BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665 CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245 br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665 nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline] nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512 nf_hook include/linux/netfilter.h:260 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] __br_forward+0x78f/0xe30 net/bridge/br_forward.c:109 br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234 br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162 nf_hook_bridge_pre net/bridge/br_input.c:245 [inline] br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348 __netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830 __netif_receive_skb_one_core net/core/dev.c:4927 [inline] __netif_receive_skb net/core/dev.c:5043 [inline] process_backlog+0x610/0x13c0 net/core/dev.c:5874 napi_poll net/core/dev.c:6311 [inline] net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379 __do_softirq+0x4a1/0x83a kernel/softirq.c:293 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091 </IRQ> do_softirq kernel/softirq.c:338 [inline] __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline] __dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825 packet_snd net/packet/af_packet.c:2959 [inline] packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] __sys_sendto+0xc44/0xc70 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1960 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45a679 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679 RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4 R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2773 [inline] __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x306/0xa10 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244 packet_alloc_skb net/packet/af_packet.c:2807 [inline] packet_snd net/packet/af_packet.c:2902 [inline] packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] __sys_sendto+0xc44/0xc70 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1960 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c4e70a87 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 5c9934b6 upstream. We got another syzbot report [1] that tells us we must use write_lock_irq()/write_unlock_irq() to avoid possible deadlock. [1] WARNING: inconsistent lock state 5.5.0-rc1-syzkaller #0 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage. syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes: ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138 {HARDIRQ-ON-W} state was registered at: lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485 __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319 sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657 tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489 tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585 tiocsetd drivers/tty/tty_io.c:2337 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597 vfs_ioctl fs/ioctl.c:47 [inline] file_ioctl fs/ioctl.c:545 [inline] do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732 ksys_ioctl+0xab/0xd0 fs/ioctl.c:749 __do_sys_ioctl fs/ioctl.c:756 [inline] __se_sys_ioctl fs/ioctl.c:754 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 3946 hardirqs last enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline] hardirqs last enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199 hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42 softirqs last enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline] softirqs last enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222 softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline] softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(disc_data_lock); <Interrupt> lock(disc_data_lock); *** DEADLOCK *** 5 locks held by syz-executor826/9605: #0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19 #1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413 #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116 #3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823 #4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288 stack backtrace: CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101 valid_state kernel/locking/lockdep.c:3112 [inline] mark_lock_irq kernel/locking/lockdep.c:3309 [inline] mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666 mark_usage kernel/locking/lockdep.c:3554 [inline] __lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909 lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485 __raw_read_lock include/linux/rwlock_api_smp.h:149 [inline] _raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223 sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138 sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402 tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536 tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50 tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387 uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104 serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761 serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline] serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850 serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149 handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189 handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206 handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830 generic_handle_irq_desc include/linux/irqdesc.h:156 [inline] do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607 </IRQ> RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline] RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579 Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7 RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7 RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000 RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899 R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138 R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000 mutex_optimistic_spin kernel/locking/mutex.c:673 [inline] __mutex_lock_common kernel/locking/mutex.c:962 [inline] __mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121 tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19 tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665 __fput+0x2ff/0x890 fs/file_table.c:280 ____fput+0x16/0x20 fs/file_table.c:313 task_work_run+0x145/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8e7/0x2ef0 kernel/exit.c:797 do_group_exit+0x135/0x360 kernel/exit.c:895 __do_sys_exit_group kernel/exit.c:906 [inline] __se_sys_exit_group kernel/exit.c:904 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:904 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x43fef8 Code: Bad RIP value. RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Fixes: 6e4e2f81 ("6pack,mkiss: fix lock inconsistency") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Florian Westphal authored
commit e608f631 upstream. syzbot reported following splat: BUG: KASAN: vmalloc-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline] BUG: KASAN: vmalloc-out-of-bounds in compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155 Read of size 4 at addr ffffc900004461f4 by task syz-executor267/7937 CPU: 1 PID: 7937 Comm: syz-executor267 Not tainted 5.5.0-rc1-syzkaller #0 size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline] compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155 compat_do_replace+0x344/0x720 net/bridge/netfilter/ebtables.c:2249 compat_do_ebt_set_ctl+0x22f/0x27e net/bridge/netfilter/ebtables.c:2333 [..] Because padding isn't considered during computation of ->buf_user_offset, "total" is decremented by fewer bytes than it should. Therefore, the first part of if (*total < sizeof(*entry) || entry->next_offset < sizeof(*entry)) will pass, -- it should not have. This causes oob access: entry->next_offset is past the vmalloced size. Reject padding and check that computed user offset (sum of ebt_entry structure plus all individual matches/watchers/targets) is same value that userspace gave us as the offset of the next entry. Reported-by: syzbot+f68108fed972453a0ad4@syzkaller.appspotmail.com Fixes: 81e675c2 ("netfilter: ebtables: add CONFIG_COMPAT support") Signed-off-by:
-
Linus Torvalds authored
commit b9959c7a upstream. This was always meant to be a temporary thing, just for testing and to see if it actually ever triggered. The only thing that reported it was syzbot doing disk image fuzzing, and then that warning is expected. So let's just remove it before -rc4, because the extra sanity testing should probably go to -stable, but we don't want the warning to do so. Reported-by: syzbot+3031f712c7ad5dd4d926@syzkaller.appspotmail.com Fixes: 8a23eb80 ("Make filldir[64]() verify the directory entry filename is valid") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Siddharth Chandrasekaran <csiddharth@vmware.com> Signed-off-by:
-
Linus Torvalds authored
commit 8a23eb80 upstream. This has been discussed several times, and now filesystem people are talking about doing it individually at the filesystem layer, so head that off at the pass and just do it in getdents{64}(). This is partially based on a patch by Jann Horn, but checks for NUL bytes as well, and somewhat simplified. There's also commentary about how it might be better if invalid names due to filesystem corruption don't cause an immediate failure, but only an error at the end of the readdir(), so that people can still see the filenames that are ok. There's also been discussion about just how much POSIX strictly speaking requires this since it's about filesystem corruption. It's really more "protect user space from bad behavior" as pointed out by Jann. But since Eric Biederman looked up the POSIX wording, here it is for context: "From readdir: The readdir() function shall return a pointer to a structure representing the directory entry at the current position in the directory stream specified by the argument dirp, and position the directory stream at the next entry. It shall return a null pointer upon reaching the end of the directory stream. The structure dirent defined in the <dirent.h> header describes a directory entry. From definitions: 3.129 Directory Entry (or Link) An object that associates a filename with a file. Several directory entries can associate names with the same file. ... 3.169 Filename A name consisting of 1 to {NAME_MAX} bytes used to name a file. The characters composing the name may be selected from the set of all character values excluding the slash character and the null byte. The filenames dot and dot-dot have special meaning. A filename is sometimes referred to as a 'pathname component'." Note that I didn't bother adding the checks to any legacy interfaces that nobody uses. Also note that if this ends up being noticeable as a performance regression, we can fix that to do a much more optimized model that checks for both NUL and '/' at the same time one word at a time. We haven't really tended to optimize 'memchr()', and it only checks for one pattern at a time anyway, and we really _should_ check for NUL too (but see the comment about "soft errors" in the code about why it currently only checks for '/') See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name lookup code looks for pathname terminating characters in parallel. Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/ Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Mattias Jacobsson authored
commit 099be748 upstream. Each call to va_copy() should have one, and only one, corresponding call to va_end(). In strbuf_addv() some code paths result in va_end() getting called multiple times. Remove the superfluous va_end(). Signed-off-by:
Mattias Jacobsson <2pi@mok.nu> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sanskriti Sharma <sansharm@redhat.com> Link: http://lkml.kernel.org/r/20181229141750.16945-1-2pi@mok.nu Fixes: ce49d843 ("perf strbuf: Match va_{add,copy} with va_end") Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 475feec0 ] We made the error message for the CORB/RIRB communication clearer by upgrading to dev_WARN() so that user can notice better. But this struck us like a boomerang: now it caught syzbot and reported back as a fatal issue although it's not really any too serious bug that worth for stopping the whole system. OK, OK, let's be softy, downgrade it to the standard dev_err() again. Fixes: dd65f7e1 ("ALSA: hda - Show the fatal CORB/RIRB error more clearly") Reported-by: syzbot+b3028ac3933f5c466389@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20191216151224.30013-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alexander Lobakin authored
[ Upstream commit 1148f9ad ] proc_dointvec_minmax_bpf_restricted() has been firstly introduced in commit 2e4a3098 ("bpf: restrict access to core bpf sysctls") under CONFIG_HAVE_EBPF_JIT. Then, this ifdef has been removed in ede95a63 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations"), because a new sysctl, bpf_jit_limit, made use of it. Finally, this parameter has become long instead of integer with fdadd049 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K") and thus, a new proc_dolongvec_minmax_bpf_restricted() has been added. With this last change, we got back to that proc_dointvec_minmax_bpf_restricted() is used only under CONFIG_HAVE_EBPF_JIT, but the corresponding ifdef has not been brought back. So, in configurations like CONFIG_BPF_JIT=y && CONFIG_HAVE_EBPF_JIT=n since v4.20 we have: CC net/core/sysctl_net_core.o net/core/sysctl_net_core.c:292:1: warning: ‘proc_dointvec_minmax_bpf_restricted’ defined but not used [-Wunused-function] 292 | proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Suppress this by guarding it with CONFIG_HAVE_EBPF_JIT again. Fixes: fdadd049 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K") Signed-off-by:
Alexander Lobakin <alobakin@dlink.ru> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191218091821.7080-1-alobakin@dlink.ruSigned-off-by:
-
Jan H. Schönherr authored
[ Upstream commit a3a57dda ] The function mce_severity_amd_smca() requires m->bank to be initialized for correct operation. Fix the one case, where mce_severity() is called without doing so. Fixes: 6bda529e ("x86/mce: Grade uncorrected errors for SMCA-enabled systems") Fixes: d28af26f ("x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()") Signed-off-by:
Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Link: https://lkml.kernel.org/r/20191210000733.17979-4-jschoenh@amazon.deSigned-off-by:
-
Johannes Weiner authored
[ Upstream commit 204cb79a ] Currently, the drop_caches proc file and sysctl read back the last value written, suggesting this is somehow a stateful setting instead of a one-time command. Make it write-only, like e.g. compact_memory. While mitigating a VM problem at scale in our fleet, there was confusion about whether writing to this file will permanently switch the kernel into a non-caching mode. This influences the decision making in a tense situation, where tens of people are trying to fix tens of thousands of affected machines: Do we need a rollback strategy? What are the performance implications of operating in a non-caching state for several days? It also caused confusion when the kernel team said we may need to write the file several times to make sure it's effective ("But it already reads back 3?"). Link: http://lkml.kernel.org/r/20191031221602.9375-1-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Chris Down <chris@chrisdown.name> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
David Hildenbrand <david@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ding Xiang authored
[ Upstream commit 188c523e ] Fix a static code checker warning: fs/ocfs2/acl.c:331 ocfs2_acl_chmod() warn: passing zero to 'PTR_ERR' Link: http://lkml.kernel.org/r/1dee278b-6c96-eec2-ce76-fe6e07c6e20f@linux.alibaba.com Fixes: 5ee0fbd5 ("ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang") Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 247f265f ] Each SBDT is located at a 4KB page and contains 512 entries. Each entry of a SDBT points to a SDB, a 4KB page containing sampled data. The last entry is a link to another SDBT page. When an event is created the function sequence executed is: __hw_perf_event_init() +--> allocate_buffers() +--> realloc_sampling_buffers() +---> alloc_sample_data_block() Both functions realloc_sampling_buffers() and alloc_sample_data_block() allocate pages and the allocation can fail. This is handled correctly and all allocated pages are freed and error -ENOMEM is returned to the top calling function. Finally the event is not created. Once the event has been created, the amount of initially allocated SDBT and SDB can be too low. This is detected during measurement interrupt handling, where the amount of lost samples is calculated. If the number of lost samples is too high considering sampling frequency and already allocated SBDs, the number of SDBs is enlarged during the next execution of cpumsf_pmu_enable(). If more SBDs need to be allocated, functions realloc_sampling_buffers() +---> alloc-sample_data_block() are called to allocate more pages. Page allocation may fail and the returned error is ignored. A SDBT and SDB setup already exists. However the modified SDBTs and SDBs might end up in a situation where the first entry of an SDBT does not point to an SDB, but another SDBT, basicly an SBDT without payload. This can not be handled by the interrupt handler, where an SDBT must have at least one entry pointing to an SBD. Add a check to avoid SDBTs with out payload (SDBs) when enlarging the buffer setup. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit a8de1304 ] The DTC v1.5.1 added references to (U)INT32_MAX. This is no problem for user-space programs since <stdint.h> defines (U)INT32_MAX along with (u)int32_t. For the kernel space, libfdt_env.h needs to be adjusted before we pull in the changes. In the kernel, we usually use s/u32 instead of (u)int32_t for the fixed-width types. Accordingly, we already have S/U32_MAX for their max values. So, we should not add (U)INT32_MAX to <linux/limits.h> any more. Instead, add them to the in-kernel libfdt_env.h to compile the latest libfdt. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 5b596e0f ] To avoid breaking the build on arches where this is not wired up, at least all the other features should be made available and when using this specific routine, the "unknown" should point the user/developer to the need to wire this up on this particular hardware architecture. Detected in a container mipsel debian cross build environment, where it shows up as: In file included from /usr/mipsel-linux-gnu/include/stdio.h:867, from /git/linux/tools/perf/lib/include/perf/cpumap.h:6, from util/session.c:13: In function 'printf', inlined from 'regs_dump__printf' at util/session.c:1103:3, inlined from 'regs__printf' at util/session.c:1131:2: /usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=] 107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ()); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cross compiler details: mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909 Also on mips64: In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867, from /git/linux/tools/perf/lib/include/perf/cpumap.h:6, from util/session.c:13: In function 'printf', inlined from 'regs_dump__printf' at util/session.c:1103:3, inlined from 'regs__printf' at util/session.c:1131:2, inlined from 'regs_user__printf' at util/session.c:1139:3, inlined from 'dump_sample' at util/session.c:1246:3, inlined from 'machines__deliver_event' at util/session.c:1421:3: /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=] 107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ()); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'printf', inlined from 'regs_dump__printf' at util/session.c:1103:3, inlined from 'regs__printf' at util/session.c:1131:2, inlined from 'regs_intr__printf' at util/session.c:1147:3, inlined from 'dump_sample' at util/session.c:1249:3, inlined from 'machines__deliver_event' at util/session.c:1421:3: /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=] 107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ()); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cross compiler details: mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909 Fixes: 2bcd355b ("perf tools: Add interface to arch registers sets") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-95wjyv4o65nuaeweq31t7l1s@git.kernel.orgSigned-off-by:
-
Diego Elio Pettenò authored
[ Upstream commit 366ba7c7 ] Reading the TOC only works if the device can play audio, otherwise these commands fail (and possibly bring the device to an unhealthy state.) Similarly, cdrom_mmc3_profile() should only be called if the device supports generic packet commands. To: Jens Axboe <axboe@kernel.dk> Cc: linux-kernel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Signed-off-by:
Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 21915eca ] build_initial_tok_table() overwrites unused sym_entry to shrink the table size. Before the entry is overwritten, table[i].sym must be freed since it is malloc'ed data. This fixes the 'definitely lost' report from valgrind. I ran valgrind against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary: [Before the fix] LEAK SUMMARY: definitely lost: 53,184 bytes in 2,874 blocks [After the fix] LEAK SUMMARY: definitely lost: 0 bytes in 0 blocks Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit 4e50573f ] The per-SoC devtype structures can contain their own callbacks that overwrite mpc8xxx_gpio_devtype_default. The clear intention is that mpc8xxx_irq_set_type is used in case the SoC does not specify a more specific callback. But what happens is that if the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and this overwrites mpc8xxx_irq_set_type to a no-op. This means that the following SoCs are affected: - fsl,mpc8572-gpio - fsl,ls1028a-gpio - fsl,ls1088a-gpio On these boards, the irq_set_type does exactly nothing, and the GPIO controller keeps its GPICR register in the hardware-default state. On the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised even if the IRQ client requests LEVEL_HIGH. Another implication is that the IRQs are not checked (e.g. level-triggered interrupts are not rejected, although they are not supported). Fixes: 82e39b0d ("gpio: mpc8xxx: handle differences between incarnations at a single place") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20191115125551.31061-1-olteanv@gmail.comTested-by:
Michael Walle <michael@walle.cc> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit e9d3009c ] The iSCSI target driver is the only target driver that does not wait for ongoing commands to finish before freeing a session. Make the iSCSI target driver wait for ongoing commands to finish before freeing a session. This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710 Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247 CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: target_completion target_complete_ok_work [target_core_mod] Call Trace: dump_stack+0x8a/0xd6 print_address_description.constprop.0+0x40/0x60 __kasan_report.cold+0x1b/0x33 kasan_report+0x16/0x20 __asan_load8+0x58/0x90 __lock_acquire+0xb1a/0x2710 lock_acquire+0xd3/0x200 _raw_spin_lock_irqsave+0x43/0x60 target_release_cmd_kref+0x162/0x7f0 [target_core_mod] target_put_sess_cmd+0x2e/0x40 [target_core_mod] lio_check_stop_free+0x12/0x20 [iscsi_target_mod] transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod] target_complete_ok_work+0x1b0/0x790 [target_core_mod] process_one_work+0x549/0xa40 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Allocated by task 889: save_stack+0x23/0x90 __kasan_kmalloc.constprop.0+0xcf/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xf6/0x360 transport_alloc_session+0x29/0x80 [target_core_mod] iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Freed by task 1025: save_stack+0x23/0x90 __kasan_slab_free+0x13a/0x190 kasan_slab_free+0x12/0x20 kmem_cache_free+0x146/0x400 transport_free_session+0x179/0x2f0 [target_core_mod] transport_deregister_session+0x130/0x180 [target_core_mod] iscsit_close_session+0x12c/0x350 [iscsi_target_mod] iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod] iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod] iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 The buggy address belongs to the object at ffff8881154ec9c0 which belongs to the cache se_sess_cache of size 352 The buggy address is located 176 bytes inside of 352-byte region [ffff8881154ec9c0, ffff8881154ecb20) The buggy address belongs to the page: page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0 flags: 0x2fff000000010200(slab|head) raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400 raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc Cc: Mike Christie <mchristi@redhat.com> Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.orgReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Maurizio Lombardi authored
[ Upstream commit aa5334c4 ] Passing the parameter "num_tgts=-1" will start an infinite loop that exhausts the system memory Link: https://lore.kernel.org/r/20191115163727.24626-1-mlombard@redhat.comSigned-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
peter chang authored
[ Upstream commit ce21c63e ] Driver was missing complete() call in mpi_sata_completion which result in SATA abort error handling timing out. That causes the device to be left in the in_recovery state so subsequent commands sent to the device fail and the OS removes access to it. Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.comAcked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
peter chang <dpf@google.com> Signed-off-by:
Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by:
Viswas G <Viswas.G@microchip.com> Signed-off-by:
-
Theodore Ts'o authored
[ Upstream commit c7df4a1e ] If the file system is corrupted such that a file's i_links_count is too small, then it's possible that when unlinking that file, i_nlink will already be zero. Previously we were working around this kind of corruption by forcing i_nlink to one; but we were doing this before trying to delete the directory entry --- and if the file system is corrupted enough that ext4_delete_entry() fails, then we exit with i_nlink elevated, and this causes the orphan inode list handling to be FUBAR'ed, such that when we unmount the file system, the orphan inode list can get corrupted. A better way to fix this is to simply skip trying to call drop_nlink() if i_nlink is already zero, thus moving the check to the place where it makes the most sense. https://bugzilla.kernel.org/show_bug.cgi?id=205433 Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.eduSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Blaž Hrastnik authored
[ Upstream commit 2dbc6f11 ] Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing data used to verify the touchpad as a Windows Precision Touchpad. 0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA) 0x09, 0xC5, // USAGE (Vendor Usage 0xC5) 0x15, 0x00, // LOGICAL_MINIMUM (0) 0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff) 0x75, 0x08, // REPORT_SIZE (8) 0x96, 0x00, 0x01, // REPORT_COUNT (0x100 (256)) 0xb1, 0x02, // FEATURE (Data,Var,Abs) However, some devices, namely Microsoft's Surface line of products instead implement a "segmented device certification report" (usage 0xC6) which returns the same report, but in smaller chunks. 0x06, 0x00, 0xff, // USAGE_PAGE (Vendor Defined) 0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA) 0x09, 0xC6, // USAGE (Vendor usage for segment #) 0x25, 0x08, // LOGICAL_MAXIMUM (8) 0x75, 0x08, // REPORT_SIZE (8) 0x95, 0x01, // REPORT_COUNT (1) 0xb1, 0x02, // FEATURE (Data,Var,Abs) 0x09, 0xC7, // USAGE (Vendor Usage) 0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff) 0x95, 0x20, // REPORT_COUNT (32) 0xb1, 0x02, // FEATURE (Data,Var,Abs) By expanding Win8 touchpad detection to also look for the segmented report, all Surface touchpads are now properly recognized by hid-multitouch. Signed-off-by:
Blaž Hrastnik <blaz@mxxn.io> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Coly Li authored
[ Upstream commit 9fcc34b1 ] In bch_mca_scan(), the number of shrinking btree node is calculated by code like this, unsigned long nr = sc->nr_to_scan; nr /= c->btree_pages; nr = min_t(unsigned long, nr, mca_can_free(c)); variable sc->nr_to_scan is number of objects (here is bcache B+tree nodes' number) to shrink, and pointer variable sc is sent from memory management code as parametr of a callback. If sc->nr_to_scan is smaller than c->btree_pages, after the above calculation, variable 'nr' will be 0 and nothing will be shrunk. It is frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make nr to be zero. Then bch_mca_scan() will do nothing more then acquiring and releasing mutex c->bucket_lock. This patch checkes whether nr is 0 after the above calculation, if 0 is the result then set 1 to variable 'n'. Then at least bch_mca_scan() will try to shrink a single B+tree node. Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Robert Jarzmik authored
[ Upstream commit 46acbcb4 ] The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and rtc-pxa drivers. A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't fixed. This patch completes the previous one. Fixes: 8b6d1034 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Link: https://lkml.kernel.org/r/20191026194420.11918-1-robert.jarzmik@free.frSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 79172ab2 ] Since the scsi subsystem adopted the blk-mq API, a host with zero sg_tablesize crashes with a NULL pointer dereference. blk_queue_max_segments: set to minimum 1 scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:0: Beginning Domain Validation scsi target0:0:0: Domain Validation skipping write tests scsi target0:0:0: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:1: Beginning Domain Validation scsi target0:0:1: Domain Validation skipping write tests scsi target0:0:1: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5 scsi target0:0:2: Beginning Domain Validation scsi target0:0:2: Domain Validation skipping write tests scsi target0:0:2: Ending Domain Validation blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 sr 0:0:2:0: Power-on or device reset occurred sd 0:0:0:0: Power-on or device reset occurred sd 0:0:1:0: Power-on or device reset occurred sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<001cd874>] blk_mq_free_request+0x66/0xe2 SR: 2004 SP: (ptrval) a2: 00874520 d0: 00000000 d1: 00000000 d2: 009ba800 d3: 00000000 d4: 00000000 d5: 08000002 a0: 0087be68 a1: 009a81e0 Process kworker/u2:2 (pid: 15, task=(ptrval)) Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 0000007a 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 0087bd98: 00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4 0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c 00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68 00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000 009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74 00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000 Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14 [<0024d200>] __scsi_execute+0x124/0x174 [<0024d0dc>] __scsi_execute+0x0/0x174 [<00265d10>] sd_revalidate_disk+0xba/0x1f02 [<00265c56>] sd_revalidate_disk+0x0/0x1f02 [<0036ddf4>] strlen+0x0/0x22 [<00227ba0>] device_add+0x3da/0x604 [<0036ddf4>] strlen+0x0/0x22 [<00267e64>] sd_probe+0x30c/0x4b4 [<0002da44>] process_one_work+0x0/0x402 [<0022b978>] really_probe+0x226/0x354 [<0022bc34>] driver_probe_device+0xa4/0xf0 [<0002da44>] process_one_work+0x0/0x402 [<0022bcd0>] __driver_attach_async_helper+0x50/0x70 [<00035dae>] async_run_entry_fn+0x36/0x130 [<0002db88>] process_one_work+0x144/0x402 [<0002e1aa>] worker_thread+0x0/0x570 [<0002e29a>] worker_thread+0xf0/0x570 [<0002e1aa>] worker_thread+0x0/0x570 [<003768d8>] schedule+0x0/0xb8 [<0003f58c>] __init_waitqueue_head+0x0/0x12 [<00033e92>] kthread+0xc2/0xf6 [<000331e8>] kthread_parkme+0x0/0x4e [<003768d8>] schedule+0x0/0xb8 [<00033dd0>] kthread+0x0/0xf6 [<00002c10>] ret_from_kernel_thread+0xc/0x14 Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c Disabling lock debugging due to kernel taint Avoid this by setting sg_tablesize = 1. Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.auReported-and-tested-by:
Michael Schmitz <schmitzmic@gmail.com> Reviewed-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Gustavo L. F. Walbon authored
[ Upstream commit 4e706af3 ] The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled. If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks. "RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state. SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only. So the message should be as the truth table shows: CPU | L1D private | RFI Flush | sysfs ----|-------------|-----------|------------------------------------- P9 | False | False | Vulnerable P9 | False | True | Mitigation: RFI Flush P9 | True | False | Vulnerable: L1D private per thread P9 | True | True | Mitigation: RFI Flush, L1D private per thread P8 | False | False | Vulnerable P8 | False | True | Mitigation: RFI Flush Output before this fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: L1D private per thread Output after fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Vulnerable: L1D private per thread Signed-off-by:
Gustavo L. F. Walbon <gwalbon@linux.ibm.com> Signed-off-by:
Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.comSigned-off-by:
-
David Hildenbrand authored
[ Upstream commit 7d821274 ] When unloading the module, one gets ------------[ cut here ]------------ Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt. WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0 ... We only have one static fake device. There is nothing to do when releasing the device (via cmm_exit()). Signed-off-by:
-
Bean Huo authored
[ Upstream commit cfcbae38 ] In function __ufshcd_query_descriptor(), in the event of an error happening, we directly goto out_unlock and forget to invaliate hba->dev_cmd.query.descriptor pointer. This results in this pointer still valid in ufshcd_copy_query_response() for other query requests which go through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and system hangs. Log as shown below: Unable to handle kernel paging request at virtual address ffff000012233c40 Mem abort info: ESR = 0x96000047 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c [ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003, pmd=00000000ba8b8003, pte=0000000000000000 Internal error: Oops: 96000047 [#2] PREEMPT SMP ... Call trace: __memcpy+0x74/0x180 ufshcd_issue_devman_upiu_cmd+0x250/0x3c0 ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8 ufs_bsg_request+0x178/0x3b0 bsg_queue_rq+0xc0/0x118 blk_mq_dispatch_rq_list+0xb0/0x538 blk_mq_sched_dispatch_requests+0x18c/0x1d8 __blk_mq_run_hw_queue+0xb4/0x118 blk_mq_run_work_fn+0x28/0x38 process_one_work+0x1ec/0x470 worker_thread+0x48/0x458 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7) ---[ end trace 793e1eb5dff69f2d ]--- note: kworker/0:2H[2054] exited with preempt_count 1 This patch is to move "descriptor = NULL" down to below the label "out_unlock". Fixes: d44a5f98(ufs: query descriptor API) Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.comReviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 6c6d59e0 ] Coverity reported the following: *** CID 101747: Null pointer dereferences (FORWARD_NULL) /drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp() 4433 kfree(mp); 4434 } 4435 mempool_free(mbox, phba->mbox_mem_pool); 4436 } 4437 out: 4438 if (ndlp && NLP_CHK_NODE_ACT(ndlp)) { vvv CID 101747: Null pointer dereferences (FORWARD_NULL) vvv Dereferencing null pointer "shost". 4439 spin_lock_irq(shost->host_lock); 4440 ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI); 4441 spin_unlock_irq(shost->host_lock); 4442 4443 /* If the node is not being used by another discovery thread, 4444 * and we are sending a reject, we are done with it. Fix by adding a check for non-null shost in line 4438. The scenario when shost is set to null is when ndlp is null. As such, the ndlp check present was sufficient. But better safe than sorry so add the shost check. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 101747 ("Null pointer dereferences") Fixes: 2e0fef85 ("[SCSI] lpfc: NPIV: split ports") CC: James Bottomley <James.Bottomley@SteelEye.com> CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com> CC: linux-next@vger.kernel.org Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 6fcbcec9 ] Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu fractions as signed 64-bit int, filters negative values and then reports lower half as signed 32-bit int. Result may looks like: fs.quota.allocated_dquots = 22327 fs.quota.cache_hits = -489852115 fs.quota.drops = -487288718 fs.quota.free_dquots = 22083 fs.quota.lookups = -486883485 fs.quota.reads = 22327 fs.quota.syncs = 335064 fs.quota.writes = 3088689 Values bigger than 2^31-1 reported as negative. All counters except "allocated_dquots" and "free_dquots" are monotonic, thus they should be reported as is without filtering negative values. Kernel doesn't have generic helper for 64-bit sysctl yet, let's use at least unsigned long. Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Paul Cercueil authored
[ Upstream commit 52ecc876 ] If we cannot create the IRQ domain, the driver should fail to probe instead of succeeding with just a warning message. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.comSigned-off-by:
-
Florian Fainelli authored
[ Upstream commit 27eebb60 ] If the 'brcm,irq-can-wake' property is specified, make sure we also enable the corresponding parent interrupt we are attached to. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jeffrey Hugo authored
[ Upstream commit efd164b5 ] Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just some constant ratio from the input across the entire frequency range. It would be great if we could specify the frequency table as a single entry constant ratio instead of a long list, ie: { .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 }, { } So, lets support that. We need to fix a corner case in qcom_find_freq() where if the freq table is non-null, but has no frequencies, we end up returning an "entry" before the table array, which is bad. Then, we need ignore the freq from the table, and instead base everything on the requested freq. Suggested-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.comSigned-off-by:
-
James Smart authored
[ Upstream commit 7cfd5639 ] If the driver receives a login that is later then LOGO'd by the remote port (aka ndlp), the driver, upon the completion of the LOGO ACC transmission, will logout the node and unregister the rpi that is being used for the node. As part of the unreg, the node's rpi value is replaced by the LPFC_RPI_ALLOC_ERROR value. If the port is subsequently offlined, the offline walks the nodes and ensures they are logged out, which possibly entails unreg'ing their rpi values. This path does not validate the node's rpi value, thus doesn't detect that it has been unreg'd already. The replaced rpi value is then used when accessing the rpi bitmask array which tracks active rpi values. As the LPFC_RPI_ALLOC_ERROR value is not a valid index for the bitmask, it may fault the system. Revise the rpi release code to detect when the rpi value is the replaced RPI_ALLOC_ERROR value and ignore further release steps. Link: https://lore.kernel.org/r/20191105005708.7399-2-jsmart2021@gmail.comSigned-off-by:
-
Bart Van Assche authored
[ Upstream commit f6b8540f ] According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical blocks must be transferred. Make the SCSI tracing code follow SBC-2. Fixes: bf816235 ("[SCSI] add scsi trace core functions and put trace points") Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.orgSigned-off-by:
-
Jan Kara authored
[ Upstream commit 015c6033 ] jbd2 statistics counting number of blocks logged in a transaction was wrong. It didn't count the commit block and more importantly it didn't count revoke descriptor blocks. Make sure these get properly counted. Reviewed-by:
-
Aneesh Kumar K.V authored
[ Upstream commit 16f6b67c ] With large memory (8TB and more) hotplug, we can get soft lockup warnings as below. These were caused by a long loop without any explicit cond_resched which is a problem for !PREEMPT kernels. Avoid this using cond_resched() while inserting hash page table entries. We already do similar cond_resched() in __add_pages(), see commit f64ac5e6 ("mm, memory_hotplug: add scheduling point to __add_pages"). rcu: 3-....: (24002 ticks this GP) idle=13e/1/0x4000000000000002 softirq=722/722 fqs=12001 (t=24003 jiffies g=4285 q=2002) NMI backtrace for cpu 3 CPU: 3 PID: 3870 Comm: ndctl Not tainted 5.3.0-197.18-default+ #2 Call Trace: dump_stack+0xb0/0xf4 (unreliable) nmi_cpu_backtrace+0x124/0x130 nmi_trigger_cpumask_backtrace+0x1ac/0x1f0 arch_trigger_cpumask_backtrace+0x28/0x3c rcu_dump_cpu_stacks+0xf8/0x154 rcu_sched_clock_irq+0x878/0xb40 update_process_times+0x48/0x90 tick_sched_handle.isra.16+0x4c/0x80 tick_sched_timer+0x68/0xe0 __hrtimer_run_queues+0x180/0x430 hrtimer_interrupt+0x110/0x300 timer_interrupt+0x108/0x2f0 decrementer_common+0x114/0x120 --- interrupt: 901 at arch_add_memory+0xc0/0x130 LR = arch_add_memory+0x74/0x130 memremap_pages+0x494/0x650 devm_memremap_pages+0x3c/0xa0 pmem_attach_disk+0x188/0x750 nvdimm_bus_probe+0xac/0x2c0 really_probe+0x148/0x570 driver_probe_device+0x19c/0x1d0 device_driver_attach+0xcc/0x100 bind_store+0x134/0x1c0 drv_attr_store+0x44/0x60 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1a0/0x270 __vfs_write+0x3c/0x70 vfs_write+0xd0/0x260 ksys_write+0xdc/0x130 system_call+0x5c/0x68 Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Anthony Steinhauser authored
[ Upstream commit 8e6b6da9 ] Some PowerPC CPUs are vulnerable to L1TF to the same extent as to Meltdown. It is also mitigated by flushing the L1D on privilege transition. Currently the sysfs gives a false negative on L1TF on CPUs that I verified to be vulnerable, a Power9 Talos II Boston 004e 1202, PowerNV T2P9D01. Signed-off-by:
Anthony Steinhauser <asteinhauser@google.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit 6e001f6a ] asm9260_timer_init misses a check for of_clk_get. Add a check for it and print errors like other clocksource drivers. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191016124330.22211-1-hslester96@gmail.comSigned-off-by:
-
Eric Dumazet authored
[ Upstream commit 9ff6aa02 ] debug_dma_dump_mappings() can take a lot of cpu cycles : lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump 163435 /sys/kernel/debug/dma-api/dump real 0m0.463s user 0m0.003s sys 0m0.459s Let's add a cond_resched() to avoid holding cpu for too long. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
