- 19 Oct, 2015 1 commit
-
-
Geert Uytterhoeven authored
Since commit a483dcbf ("ARM: shmobile: lager: Remove legacy board support"), R-Car Gen2 SoCs are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
- 16 Oct, 2015 5 commits
-
-
Mikko Rapeli authored
Fixes userspace compile error since list_head is not exported to userspace headers. Suggested by Emil Velikov <emil.l.velikov@gmail.com> at https://lkml.org/lkml/2015/6/3/792Signed-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Mikko Rapeli authored
Fixes userspace compile error: drm/sis_drm.h:68:19: error: field ‘obj_list’ has incomplete type struct list_head obj_list; Suggested by Emil Velikov <emil.l.velikov@gmail.com> at https://lkml.org/lkml/2015/6/3/792Signed-off-by:
-
git://ftp.arm.linux.org.uk/~rmk/linux-armDave Airlie authored
This series: * adds support for interlaced video modes to the ipu-v3 driver and dw_hdmi bridge. * reworks the dw_hdmi connector enable/disable support, to ensure that when DRM disables the output, it stays disabled irrespective of the hotplug state. * adds support for connector forcing, so we can force the hotplug state for this connector. * adds the ALSA AHB audio driver to the bridge: Iwai has acked the audio driver. * a few fixes to the ACR calculations to allow more modes to work with audio on iMX6. Fabio has independently tested this series, so all patches here carry his tested-by tag. * 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm: bridge/dw_hdmi: replace CTS calculation for the ACR drm: bridge/dw_hdmi: remove ratio support from ACR code drm: bridge/dw_hdmi: adjust pixel clock values in N calculation drm: bridge/dw_hdmi: avoid being recursive in N calculation drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver drm: bridge/dw_hdmi-ahb-audio: add audio driver drm: bridge/dw_hdmi: improve HDMI enable/disable handling drm: bridge/dw_hdmi: add connector mode forcing drm: bridge/dw_hdmi: add support for interlaced video modes gpu: imx: fix support for interlaced modes gpu: imx: simplify sync polarity setting
-
Dave Airlie authored
Merge commit '06d1ee32' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge the drm-fixes pull from Linus's tree into drm-next. This is to fix some conflicts and make future pulls cleaner
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Another round of drm-misc. Unfortunately the DRM_UNLOCKED removal for DRIVER_MODESET isn't complete yet for lack of review on 1-2 patches. Otherwise just various stuff all over. * tag 'topic/drm-misc-2015-10-08' of git://anongit.freedesktop.org/drm-intel: drm: Stop using drm_vblank_count() as the hw frame counter drm/irq: Use unsigned int pipe in public API drm: Use DRM_ROTATE_MASK and DRM_REFLECT_MASK drm: Add DRM_ROTATE_MASK and DRM_REFLECT_MASK vga_switcheroo: Add missing locking vgaarb: use kzalloc in vga_arbiter_add_pci_device() drm: Don't zero vblank timestamps from the irq handler drm: Hack around CONFIG_AGP=m build failures drm/i915: Remove setparam ioctl drm: Remove dummy agp ioctl wrappers drm/vmwgfx: Stop checking for DRM_UNLOCKED drm/drm_ioctl.c: kerneldoc drm: Define a drm_invalid_op ioctl implementation drm: Remove __OS_HAS_AGP drm/doc: Update docs about device instance setup
-
- 15 Oct, 2015 4 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-2015-09-28-merged' of git://anongit.freedesktop.org/drm-intel into drm-next drm-intel-next-2015-09-28: - fastboot by default for some systems (Maarten Lankhorts) - piles of workarounds for bxt and skl - more fbc work from Paulo - fix hdmi hotplug detection (Sonika) - first few patches from Ville to parametrize register macros, prep work for typesafe mmio functions - prep work for nv12 rotation (Tvrtko Ursulin) - various other bugfixes and improvements all over I have another backmerge here since things became messy and I didn't realize you resolved some of them already (usually you complain when there's a conflict ...). For 4.4 I plan one more feature round after this and then that's it. * tag 'drm-intel-next-2015-09-28-merged' of git://anongit.freedesktop.org/drm-intel: (80 commits) drm/i915: Update DRIVER_DATE to 20150928 drm/i915: fix task reference leak in i915_debugfs.c drm/i915: Defer adding preallocated stolen objects to the VM list drm/i915: Remove extraneous request cancel. drm/i915: Enable querying offset of UV plane with intel_plane_obj_offset drm/i915: Support NV12 in rotated GGTT mapping drm/i915: Support appending to the rotated pages mapping drm/i915: Support planar formats in tile height calculations drm/i915/bxt: Update revision id for BXT C0 drm/i915: Parametrize CSR_PROGRAM registers drm/i915: Parametrize DDI_BUF_TRANS registers drm/i915: Parametrize TV luma/chroma filter registers drm/i915: Replace raw numbers with the approproate register name in ILK turbo code drm/i915: Parametrize ILK turbo registers drm/i915: Parametrize FBC_TAG registers drm/i915: Parametrize GEN7_GT_SCRATCH and GEN7_LRA_LIMITS drm/i915: Parametrize LRC registers drm/i915: Don't pass sdvo_reg to intel_sdvo_select_{ddc, i2c}_bus() drm/i915: Ignore "digital output" and "not HDMI output" bits for eDP detection drm/i915: Make sure we don't detect eDP on g4x ...
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
This is the first radeon and amdgpu pull for drm-next. Highlights include: - Efficiency improvements to the CS checker for pre-SI asics - Cursor fixes ported from radeon to amdgpu - Enable GPU scheduler by default - Add a bunch of GPUVM debugging options - Add support for some new atombios opcodes - Misc cleanups and fixes * 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux: (42 commits) drm/amdgpu: fix lockup when clean pending fences drm/amdgpu: add timer to fence to detect scheduler lockup drm/amdgpu: add VM CS mapping trace point drm/amdgpu: add option to clear VM page tables after every submit drm/amdgpu: add option to stop on VM fault drm/amdgpu: only print meaningful VM faults drm/amdgpu: also trace already allocated VMIDs drm/amdgpu: Drop unnecessary #include <linux/vga_switcheroo.h> drm/radeon: Drop unnecessary #include <linux/vga_switcheroo.h> drm/amdgpu: clean up pageflip interrupt handling drm/amdgpu: rework sdma structures drm/amdgpu: unpin cursor BOs on suspend and pin them again on resume drm/amdgpu/dce8: Fold set_cursor() into show_cursor() drm/amdgpu/dce8: Clean up reference counting and pinning of the cursor BOs drm/amdgpu/dce8: Move hotspot handling out of set_cursor drm/amdgpu/dce8: Re-show the cursor after a modeset (v2) drm/amdgpu/dce8: Use cursor_set2 hook for enabling / disabling the HW cursor drm/amdgpu/dce11: Fold set_cursor() into show_cursor() drm/amdgpu/dce11: Clean up reference counting and pinning of the cursor BOs drm/amdgpu/dce11: Move hotspot handling out of set_cursor ...
-
git://ftp.arm.linux.org.uk/~rmk/linux-armDave Airlie authored
* removes the now unused DRM slave encoder support, which all users have migrated away from, allowing us to simplify the code. * ensure all pending interrupts are processed together, rather than needing the handler to be re-entered each time. * use more HDMI helpers to setup the info frames. * fix EDID read handling by ensuring that we always wait the specified time before attempting to read the EDID, no matter where the EDID read request came from. * 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/i2c: tda998x: clean up after struct tda998x_priv2 removal drm/i2c: tda998x: kill struct tda998x_priv2 drm/i2c: tda998x: move connector into struct tda998x_priv drm/i2c: tda998x: remove encoder pointer drm/i2c: tda998x: remove DRM slave encoder support drm/i2c: tda998x: use more HDMI helpers drm/i2c: tda998x: handle all outstanding interrupts drm/i2c: tda998x: convert to u8/u16/u32 types drm/i2c: tda998x: re-implement "Fix EDID read timeout on HDMI connect" drm/i2c: tda998x: report whether we actually handled the IRQ drm/i2c: tda998x: remove useless NULL checks
-
git://ftp.arm.linux.org.uk/~rmk/linux-armDave Airlie authored
* remove support for the non-component support from the Armada DRM driver, switching it to component-only mode. * create a "armada plane" to allow the primary and overlay planes to share some code. * increase efficiency by using inherently atomic operations, rather than spinlocking to achieve atomicity. Eg, if we want to exchange a value, using xchg(). * increase PM savings by stopping the external pixel clock when we're in DPMS mode. * 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/armada: move frame wait wakeup into plane work drm/armada: convert overlay plane vbl worker to a armada plane worker drm/armada: move CRTC flip work to primary plane work drm/armada: move frame wait into armada_frame drm/armada: move the locking for armada_drm_vbl_event_remove() drm/armada: move the update of dplane->ctrl0 out of spinlock drm/armada: move write to dma_ctrl0 to armada_drm_crtc_plane_disable() drm/armada: provide a common helper to disable a plane drm/armada: allocate primary plane ourselves drm/armada: add primary plane creation drm/armada: introduce generic armada_plane struct drm/armada: update armada overlay to use drm_universal_plane_init() drm/armada: use xchg() to atomically update dplane->old_fb drm/armada: factor out retirement of old fb drm/armada: rename overlay identifiers drm/armada: redo locking and atomics for armada_drm_crtc_complete_frame_work() drm/armada: disable CRTC clock during DPMS drm/armada: use drm_plane_force_disable() to disable the overlay plane drm/armada: move vbl code into armada_crtc drm/armada: remove non-component support
-
- 14 Oct, 2015 30 commits
-
-
Junwei Zhang authored
The first lockup fence will lock the fence list of scheduler. Then cancel the delayed workqueues for all clean pending fences without waiting the workqueues to finish. Change-Id: I9bec826de1aa49d587b0662f3fb4a95333979429 Signed-off-by:
Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com>
-
Junwei Zhang authored
Change-Id: I67e987db0efdca28faa80b332b75571192130d33 Signed-off-by:
David Zhou <david1.zhou@amd.com> Reviewed-by:
-
Christian König authored
Output all VM mappings a command submission uses. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
This makes it much easier to find when userspace misses to send some buffers. Signed-off-by:
-
Christian König authored
Signed-off-by:
-
Christian König authored
Port of radeon commit 9b7d786b. Signed-off-by:
-
Christian König authored
Signed-off-by:
-
Lukas Wunner authored
This was added to two radeon files even though they don't use any vga_switcheroo symbols, the amdgpu fork inherited them: Added to amdgpu_acpi.c by commit d7a2952f ("drm/radeon: Add support for the ATIF ACPI method to the radeon driver"). Added to amdgpu_bios.c by commit 6a9ee8af ("vga_switcheroo: initial implementation (v15)"). Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Lukas Wunner authored
This was added to three files even though they don't use any vga_switcheroo symbols: Added to radeon_acpi.c by commit d7a2952f ("drm/radeon: Add support for the ATIF ACPI method to the radeon driver"). Added to radeon_asic.c by commit 0a10c851 ("drm/radeon: create radeon_asic.c"). Added to radeon_bios.c by commit 6a9ee8af ("vga_switcheroo: initial implementation (v15)"). Signed-off-by:
-
Alex Deucher authored
Check to make sure we aren't touching a non-existent display controller and simplify the code. Reviewed-by:
-
Alex Deucher authored
Rework the sdma structures in the driver to consolidate all of the sdma info into a single structure and allow for asics that may have different numbers of sdma instances. Reviewed-by:
-
Alex Deucher authored
Everything is evicted from VRAM before suspend, so we need to make sure all BOs are unpinned and re-pinned after resume. Fixes broken mouse cursor after resume introduced by commit b9729b17. Port of radeon commit: f3cbb17bReviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Alex Deucher authored
Port of radeon commit: 8991668aReviewed-by:
-
Alex Deucher authored
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce8 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce8 set_cursor. This fixes dce8 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0Reviewed-by:
-
Alex Deucher authored
It's only needed in dce8 crtc_cursor_set2. Port of radeon commit: 2e007e61Reviewed-by:
-
Alex Deucher authored
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fa v2: change radeon reference in error message Reviewed-by:
-
Alex Deucher authored
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a601 3feba08dReviewed-by:
-
Alex Deucher authored
Port of radeon commit: 8991668aReviewed-by:
-
Alex Deucher authored
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce11 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce11 set_cursor. This fixes dce11 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0Reviewed-by:
-
Alex Deucher authored
It's only needed in dce11 crtc_cursor_set2. Port of radeon commit: 2e007e61Reviewed-by:
-
Alex Deucher authored
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fa v2: change radeon reference in error output Reviewed-by:
-
Alex Deucher authored
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a601 3feba08dReviewed-by:
-
Alex Deucher authored
Port of radeon commit: 8991668aReviewed-by:
-
Alex Deucher authored
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce10 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce10 set_cursor. This fixes dce10 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0Reviewed-by:
-
Alex Deucher authored
It's only needed in dce10 crtc_cursor_set2. Port of radeon commit: 2e007e61Reviewed-by:
-
Alex Deucher authored
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fa v2: change radeon reference in error message Reviewed-by:
-
Alex Deucher authored
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a601 3feba08dReviewed-by:
-
Alex Deucher authored
Better precision than the regular div opcode. v2: drop 64 bit divide v3: fix op handling. This actually is a 64 bit divide. Reviewed-by:
-
Alex Deucher authored
Better precision than the regular mul opcode. v2: handle big endian properly. Reviewed-by:
-
Alex Deucher authored
Just skips a data section. Reviewed-by:
-
