- 13 Dec, 2019 40 commits
-
-
Alice Michael authored
[ Upstream commit 843faff8 ] When calculating the valid length for a VIRTCHNL_OP_ENABLE_CHANNELS message, we accidentally allowed messages with one extra virtchnl_channel_info structure on the end. This happened due to an off by one error, because we forgot that valid_len already accounted for one virtchnl_channel_info structure, so we need to subtract one from the num_tc value. Signed-off-by:
Alice Michael <alice.michael@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mitch Williams authored
[ Upstream commit 7c3758f7 ] On link types that do not support autoneg, we cannot attempt to restart nway negotiation. This results in a dead link that requires a power cycle to remedy. Fix this by saving off the autoneg state and checking this value before we try to restart nway. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Christophe JAILLET authored
[ Upstream commit b28cc6ce ] In case of error, we return 0. This is spurious and not consistent with the other functions of the driver. Commit e115a2bf has modified more than what is said in the commit message. Reverse part of it znd return an error when needed, as it was previously. Fixes: e115a2bf ("rtc: max77686: stop validating rtc_time in .read_time") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 50c8aec4 ] (RTC,ALM)YEAR registers of Exynos built-in RTC device contains 3 BCD characters. s3c-rtc driver uses only 2 lower of them and supports years from 2000..2099 range. The third BCD value is typically set to 0, but it looks that handling of it is broken in the hardware. It sometimes defaults to a random (even non-BCD) value. This is not an issue for handling RTCYEAR register, because bcd2bin() properly handles only 8bit values (2 BCD characters, the third one is skipped). The problem is however with ALMYEAR register and proper RTC alarm operation. When YEAREN bit is set for the configured alarm, RTC hardware triggers alarm only when ALMYEAR and RTCYEAR matches. This usually doesn't happen because of the random noise on the third BCD character. Fix this by simply skipping setting ALMYEAR register in alarm configuration. This workaround fixes broken alarm operation on Exynos built-in rtc device. My tests revealed that the issue happens on the following Exynos series: 3250, 4210, 4412, 5250 and 5410. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Ivan Khoronzhuk authored
[ Upstream commit d0e14c4d ] The msgtype and seqid that is smth that belongs to event for comparison but not for staled txq skb. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit a2dc5091 ] MAX8997 driver disables automatic path selection from MicroUSB connector and manually sets path to either UART or USB lines. However the code for setting USB path worked only for USB host mode (when ID pin is set to ground). When standard USB cable (USB device mode) is connected, path registers are not touched. This means that once the non-USB accessory is connected to MAX8997-operated micro USB port, the path is no longer set to USB and USB device mode doesn't work. This patch fixes it by setting USB path both for USB and USB host modes. Signed-off-by:
-
Anand Moon authored
[ Upstream commit 8fe325fa ] From Odroid XU3/XU4/HC1 schematics the LDO13 regulator for SD2, can be set on 1.8V or 2.8V so the minimal value should be fixed to 1.8V. This is necessary to support UHS-I tuning (otherwise card won't be detected during boot). Signed-off-by:
Anand Moon <linux.amoon@gmail.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Denis V. Lunev authored
[ Upstream commit 58a923ad ] Technically dlm_config_nodes() could return error and keep nodes uninitialized. After that on the fail path of we'll call kfree() for that uninitialized value. The patch is simple - we should just initialize nodes with NULL. Signed-off-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Lev Faerman authored
[ Upstream commit 6263e811 ] Fixes bad masks that would break compilation when evaluated. Signed-off-by:
Lev Faerman <lev.faerman@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
-
Jagan Teki authored
[ Upstream commit ee678706 ] DSI DPHY gate bit on MIPI DSI clock register is bit 15 not bit 30. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Moni Shoua authored
[ Upstream commit 69811496 ] Fix reference counting leakage when the event handler aborts due to an unsupported event for the resource type. Fixes: a14c2d4b ("net/mlx5_core: Warn on unsupported events of QP/RQ/SQ") Signed-off-by:
Moni Shoua <monis@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Eugeniy Paltsev authored
[ Upstream commit 3624379d ] If IOC was already enabled (due to bootloader) it technically needs to be reconfigured with aperture base,size corresponding to Linux memory map which will certainly be different than uboot's. But disabling and reenabling IOC when DMA might be potentially active is tricky business. To avoid random memory issues later, just panic here and ask user to upgrade bootloader to one which doesn't enable IOC This was actually seen as issue on some of the HSDK board with a version of uboot which enabled IOC. There were random issues later with starting of X or peripherals etc. Also while I'm at it, replace hardcoded bits in ARC_REG_IO_COH_PARTIAL and ARC_REG_IO_COH_ENABLE registers by definitions. Inspired by: https://lkml.org/lkml/2018/1/19/557Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 447750f2 ] Its possible to set both HANDLE and POSITION when replacing a rule. In this case, the rule at POSITION gets replaced using the userspace-provided handle. Rule handles are supposed to be generated by the kernel only. Duplicate handles should be harmless, however better disable this "feature" by only checking for the POSITION attribute on insert operations. Fixes: 5e948466 ("netfilter: nf_tables: add insert operation") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 8d20d6e9 ] Currently chunk hash key (which is in fact pointer to the inode) is derived as chunk->mark.conn->obj. It is tricky to make this dereference reliable for hash table lookups only under RCU as mark can get detached from the connector and connector gets freed independently of the running lookup. Thus there is a possible use after free / NULL ptr dereference issue: CPU1 CPU2 untag_chunk() ... audit_tree_lookup() list_for_each_entry_rcu(p, list, hash) { list_del_rcu(&chunk->hash); fsnotify_destroy_mark(entry); fsnotify_put_mark(entry) chunk_to_key(p) if (!chunk->mark.connector) ... hlist_del_init_rcu(&mark->obj_list); if (hlist_empty(&conn->list)) { inode = fsnotify_detach_connector_from_object(conn); mark->connector = NULL; ... frees connector from workqueue chunk->mark.connector->obj This race is probably impossible to hit in practice as the race window on CPU1 is very narrow and CPU2 has a lot of code to execute. Still it's better to have this fixed. Since the inode the chunk is attached to is constant during chunk's lifetime it is easy to cache the key in the chunk itself and thus avoid these issues. Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Vincent Whitchurch authored
[ Upstream commit 344eb553 ] getuser() and putuser() (and there underscored variants) use two strb[t]/ldrb[t] instructions when they are asked to get/put 16-bits. This means that the read/write is not atomic even when performed to a 16-bit-aligned address. This leads to problems with vhost: vhost uses __getuser() to read the vring's 16-bit avail.index field, and if it happens to observe a partial update of the index, wrong descriptors will be used which will lead to a breakdown of the virtio communication. A similar problem exists for __putuser() which is used to write to the vring's used.index field. The reason these functions use strb[t]/ldrb[t] is because strht/ldrht instructions did not exist until ARMv6T2/ARMv7. So we should be easily able to fix this on ARMv7. Also, since all ARMv6 processors also don't actually use the unprivileged instructions anymore for uaccess (since CONFIG_CPU_USE_DOMAINS is not used) we can easily fix them too. Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Andrei Otcheretianski authored
[ Upstream commit dc1aca22 ] TDLS discovery response frame is a unicast direct frame to the peer. Since we don't have a STA for this peer, this frame goes through iwl_tx_skb_non_sta(). As the result aux_sta and some completely arbitrary queue would be selected for this frame, resulting in a queue hang. Fix that by sending such frames through AP sta instead. Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
[ Upstream commit 8954e1eb ] In D3 suspend flow in 9260 gen2 HW, the NIC receives two PERST signals. The first PERST is expected and indicates the device on coming resume flow. The second PERST causes FW restart FW restart. In order to avoid this issue, the FW set the persistence bit on. Once this bit is set, the FW ignores reset attempts. The problem is when the FW gets assert during D3 and then the persistence bit is set and causes the FW to ignore reset. To handle this issue, the FW opens the preg bit which allows access to the persistence bit, so that the driver clear the persistence bit and reset the NIC. The flow is as follows: the driver checks if the persistence bit is set. If the bit is set, the driver checks if he can clear the bit. If the driver can not clear the bit then there is no point to continue configuring the NIC since it will fail. The fix was added is in start HW flow instead of the resume flow since in general, if the persistence bit is set, the driver can not start the FW. So it is good to check it when we start configuring the NIC. The driver does not need to close the preg bit since the FW close it during the start flow. Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 06bc6f6e ] When we mark a TID as no longer having a queue, there's no guarantee the TX path isn't using this txq_id right now, having accessed it just before we reset the value. To fix this, add synchronize_net() when we change the TIDs from having a queue to not having one, so that we can then be sure that the TX path is no longer accessing that queue. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Arjun Vynipadath authored
[ Upstream commit 24357e06 ] mac_hlist was initialized during adapter_up, which will be called every time a vf device is first brought up, or every time when device is brought up again after bringing all devices down. This means our state of previous list is lost, causing a memleak if entries are present in the list. To fix that, move list init to the condition that performs initial one time adapter setup. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit d6e19358 ] Right now serial drivers process sysrq keys deep in their character receiving code. This means that they've already grabbed their port->lock spinlock. This can end up getting in the way if we've go to do serial stuff (especially kgdb) in response to the sysrq. Serial drivers have various hacks in them to handle this. Looking at '8250_port.c' you can see that the console_write() skips locking if we're in the sysrq handler. Looking at 'msm_serial.c' you can see that the port lock is dropped around uart_handle_sysrq_char(). It turns out that these hacks aren't exactly perfect. If you have lockdep turned on and use something like the 8250_port hack you'll get a splat that looks like: WARNING: possible circular locking dependency detected [...] is trying to acquire lock: ... (console_owner){-.-.}, at: console_unlock+0x2e0/0x5e4 but task is already holding lock: ... (&port_lock_key){-.-.}, at: serial8250_handle_irq+0x30/0xe4 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x58/0x70 serial8250_console_write+0xa8/0x250 univ8250_console_write+0x40/0x4c console_unlock+0x528/0x5e4 register_console+0x2c4/0x3b0 uart_add_one_port+0x350/0x478 serial8250_register_8250_port+0x350/0x3a8 dw8250_probe+0x67c/0x754 platform_drv_probe+0x58/0xa4 really_probe+0x150/0x294 driver_probe_device+0xac/0xe8 __driver_attach+0x98/0xd0 bus_for_each_dev+0x84/0xc8 driver_attach+0x2c/0x34 bus_add_driver+0xf0/0x1ec driver_register+0xb4/0x100 __platform_driver_register+0x60/0x6c dw8250_platform_driver_init+0x20/0x28 ... -> #0 (console_owner){-.-.}: lock_acquire+0x1e8/0x214 console_unlock+0x35c/0x5e4 vprintk_emit+0x230/0x274 vprintk_default+0x7c/0x84 vprintk_func+0x190/0x1bc printk+0x80/0xa0 __handle_sysrq+0x104/0x21c handle_sysrq+0x30/0x3c serial8250_read_char+0x15c/0x18c serial8250_rx_chars+0x34/0x74 serial8250_handle_irq+0x9c/0xe4 dw8250_handle_irq+0x98/0xcc serial8250_interrupt+0x50/0xe8 ... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&port_lock_key); lock(console_owner); lock(&port_lock_key); lock(console_owner); *** DEADLOCK *** The hack used in 'msm_serial.c' doesn't cause the above splats but it seems a bit ugly to unlock / lock our spinlock deep in our irq handler. It seems like we could defer processing the sysrq until the end of the interrupt handler right after we've unlocked the port. With this scheme if a whole batch of sysrq characters comes in one irq then we won't handle them all, but that seems like it should be a fine compromise. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Wen Yang authored
[ Upstream commit a4c2fec1 ] We can't use "adap->dev" after it has been freed. Fixes: 5bf4fa7d ("i2c: break out OF support into separate file") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit 3df70afe ] The driver calls release_resource in remove to match request_mem_region in probe, which is incorrect. Fix it by using the right one, release_mem_region. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit dcb77e4b ] The driver misses calling destroy_workqueue in remove like what is done when probe fails. Add the missed calls to fix it. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit e37f9f13 ] Glibc-2.30 gained gettid() wrapper, selftests fail to compile: lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration 58 | static pid_t gettid(void) | ^~~~~~ In file included from /usr/include/unistd.h:1170, from include/test_util.h:18, from lib/assert.c:10: /usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here 34 | extern __pid_t gettid (void) __THROW; | ^~~~~~ Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Yunhao Tian authored
[ Upstream commit 0b8e7bbd ] The datasheet of V3s (and various other chips) wrote that TCON0_DCLK_DIV can be >= 1 if only dclk is used, and must >= 6 if dclk1 or dclk2 is used. As currently neither dclk1 nor dclk2 is used (no writes to these bits), let's set minimal division to 1. If this minimal division is 6, some common dot clock frequencies can't be produced (e.g. 30MHz will not be possible and will fallback to 25MHz), which is obviously not an expected behaviour. Signed-off-by:
Yunhao Tian <t123yh@outlook.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/Signed-off-by:
-
paulhsia authored
[ Upstream commit f5cdc9d4 ] If the nullity check for `substream->runtime` is outside of the lock region, it is possible to have a null runtime in the critical section if snd_pcm_detach_substream is called right before the lock. Signed-off-by:
paulhsia <paulhsia@chromium.org> Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.orgSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alexander Shishkin authored
[ Upstream commit 697d8778 ] Commit: 313ccb96 ("perf: Allocate context task_ctx_data for child event") makes the inherit path skip over the current event in case of task_ctx_data allocation failure. This, however, is inconsistent with allocation failures in perf_event_alloc(), which would abort the fork. Correct this by returning an error code on task_ctx_data allocation failure and failing the fork in that case. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20191105075702.60319-1-alexander.shishkin@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit ff51ff84 ] While seemingly harmless, __sched_fork() does hrtimer_init(), which, when DEBUG_OBJETS, can end up doing allocations. This then results in the following lock order: rq->lock zone->lock.rlock batched_entropy_u64.lock Which in turn causes deadlocks when we do wakeups while holding that batched_entropy lock -- as the random code does. Solve this by moving __sched_fork() out from under rq->lock. This is safe because nothing there relies on rq->lock, as also evident from the other __sched_fork() callsite. Signed-off-by:
-
Pan Bian authored
[ Upstream commit 79aae6ac ] The device md->input is used after it is released. Setting the device data to NULL is unnecessary as the device is never used again. Instead, md->input should be assigned NULL to avoid accessing the freed memory accidently. Besides, checking md->si against NULL is superfluous as it points to a variable address, which cannot be NULL. Signed-off-by:
Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/1572936379-6423-1-git-send-email-bianpan2016@163.comSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Xiaodong Xu authored
[ Upstream commit 4944a4b1 ] An ESP packet could be decrypted in async mode if the input handler for this packet returns -EINPROGRESS in xfrm_input(). At this moment the device reference in skb is held. Later xfrm_input() will be invoked again to resume the processing. If the transform state is still valid it would continue to release the device reference and there won't be a problem; however if the transform state is not valid when async resumption happens, the packet will be dropped while the device reference is still being held. When the device is deleted for some reason and the reference to this device is not properly released, the kernel will keep logging like: unregister_netdevice: waiting for ppp2 to become free. Usage count = 1 The issue is observed when running IPsec traffic over a PPPoE device based on a bridge interface. By terminating the PPPoE connection on the server end for multiple times, the PPPoE device on the client side will eventually get stuck on the above warning message. This patch will check the async mode first and continue to release device reference in async resumption, before it is dropped due to invalid state. v2: Do not assign address family from outer_mode in the transform if the state is invalid v3: Release device reference in the error path instead of jumping to resume Fixes: 4ce3dbe3 ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)") Signed-off-by:
Xiaodong Xu <stid.smth@gmail.com> Reported-by:
Bo Chen <chenborfc@163.com> Tested-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Stephan Gerhold authored
[ Upstream commit a71a29f5 ] I2C communication errors (-EREMOTEIO) during the IRQ handler of nxp-nci result in a NULL pointer dereference at the moment: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 355 Comm: irq/137-nxp-nci Not tainted 5.4.0-rc6 #1 RIP: 0010:skb_queue_tail+0x25/0x50 Call Trace: nci_recv_frame+0x36/0x90 [nci] nxp_nci_i2c_irq_thread_fn+0xd1/0x285 [nxp_nci_i2c] ? preempt_count_add+0x68/0xa0 ? irq_forced_thread_fn+0x80/0x80 irq_thread_fn+0x20/0x60 irq_thread+0xee/0x180 ? wake_threads_waitq+0x30/0x30 kthread+0xfb/0x130 ? irq_thread_check_affinity+0xd0/0xd0 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x40 Afterward the kernel must be rebooted to work properly again. This happens because it attempts to call nci_recv_frame() with skb == NULL. However, unlike nxp_nci_fw_recv_frame(), nci_recv_frame() does not have any NULL checks for skb, causing the NULL pointer dereference. Change the code to call only nxp_nci_fw_recv_frame() in case of an error. Make sure to log it so it is obvious that a communication error occurred. The error above then becomes: nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121 nci: __nci_request: wait_for_completion_interruptible_timeout failed 0 nxp-nci_i2c i2c-NXP1001:00: NFC: Read failed with error -121 Fixes: 6be88670 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 69924b89 ] if the child has been negative and just went positive under us, we want coherent d_is_positive() and ->d_inode. Don't unlock the parent until we'd done that work... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
[ Upstream commit a2ece088 ] Signed-off-by:
-
Mordechay Goodstein authored
[ Upstream commit cb1a4bad ] From gen2 PN is totally offloaded to hardware (also the space for the IV isn't part of the skb). As you can see in mvm/mac80211.c:3545, the MAC for cipher types CCMP/GCMP doesn't set IEEE80211_KEY_FLAG_PUT_IV_SPACE for gen2 NICs. This causes all the AMSDU data to be corrupted with cipher enabled. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Sirong Wang authored
[ Upstream commit 531eb45b ] Size of pointer to buf field of struct hns_roce_hem_chunk should be considered when calculating HNS_ROCE_HEM_CHUNK_LEN, or sg table size will be larger than expected when allocating hem. Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/1572575610-52530-2-git-send-email-liweihang@hisilicon.comSigned-off-by:
Sirong Wang <wangsirong@huawei.com> Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 03ad0d70 ] if the second call of should_expire() in there ends up grabbing and returning a new reference to dentry, we need to drop it before continuing. Signed-off-by:
-
Chuhong Yuan authored
commit 50b2b571 upstream. The driver forgets to call pm_runtime_disable in remove. Add the missed calls to fix it. Signed-off-by:
-
Jiangfeng Xiao authored
commit 7d73170e upstream. Doing fuzz test on sbsa uart device, causes a kernel crash due to NULL pointer dereference: ------------[ cut here ]------------ Unable to handle kernel paging request at virtual address fffffffffffffffc pgd = ffffffe331723000 [fffffffffffffffc] *pgd=0000002333595003, *pud=0000002333595003, *pmd=00000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: ping(O) jffs2 rtos_snapshot(O) pramdisk(O) hisi_sfc(O) Drv_Nandc_K(O) Drv_SysCtl_K(O) Drv_SysClk_K(O) bsp_reg(O) hns3(O) hns3_uio_enet(O) hclgevf(O) hclge(O) hnae3(O) mdio_factory(O) mdio_registry(O) mdio_dev(O) mdio(O) hns3_info(O) rtos_kbox_panic(O) uart_suspend(O) rsm(O) stp llc tunnel4 xt_tcpudp ipt_REJECT nf_reject_ipv4 iptable_filter ip_tables x_tables sd_mod xhci_plat_hcd xhci_pci xhci_hcd usbmon usbhid usb_storage ohci_platform ohci_pci ohci_hcd hid_generic hid ehci_platform ehci_pci ehci_hcd vfat fat usbcore usb_common scsi_mod yaffs2multi(O) ext4 jbd2 ext2 mbcache ofpart i2c_dev i2c_core uio ubi nand nand_ecc nand_ids cfi_cmdset_0002 cfi_cmdset_0001 cfi_probe gen_probe cmdlinepart chipreg mtdblock mtd_blkdevs mtd nfsd auth_rpcgss oid_registry nfsv3 nfs nfs_acl lockd sunrpc grace autofs4 CPU: 2 PID: 2385 Comm: tty_fuzz_test Tainted: G O 4.4.193 #1 task: ffffffe32b23f110 task.stack: ffffffe32bda4000 PC is at uart_break_ctl+0x44/0x84 LR is at uart_break_ctl+0x34/0x84 pc : [<ffffff8393196098>] lr : [<ffffff8393196088>] pstate: 80000005 sp : ffffffe32bda7cc0 x29: ffffffe32bda7cc0 x28: ffffffe32b23f110 x27: ffffff8393402000 x26: 0000000000000000 x25: ffffffe32b233f40 x24: ffffffc07a8ec680 x23: 0000000000005425 x22: 00000000ffffffff x21: ffffffe33ed73c98 x20: 0000000000000000 x19: ffffffe33ed94168 x18: 0000000000000004 x17: 0000007f92ae9d30 x16: ffffff8392fa6064 x15: 0000000000000010 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000020 x10: 0000007ffdac1708 x9 : 0000000000000078 x8 : 000000000000001d x7 : 0000000052a64887 x6 : ffffffe32bda7e08 x5 : ffffffe32b23c000 x4 : 0000005fbc5b0000 x3 : ffffff83938d5018 x2 : 0000000000000080 x1 : ffffffe32b23c040 x0 : ffffff83934428f8 virtual start addr offset is 38ac00000 module base offset is 2cd4cf1000 linear region base offset is : 0 Process tty_fuzz_test (pid: 2385, stack limit = 0xffffffe32bda4000) Stack: (0xffffffe32bda7cc0 to 0xffffffe32bda8000) 7cc0: ffffffe32bda7cf0 ffffff8393177718 ffffffc07a8ec680 ffffff8393196054 7ce0: 000000001739f2e0 0000007ffdac1978 ffffffe32bda7d20 ffffff8393179a1c 7d00: 0000000000000000 ffffff8393c0a000 ffffffc07a8ec680 cb88537fdc8ba600 7d20: ffffffe32bda7df0 ffffff8392fa5a40 ffffff8393c0a000 0000000000005425 7d40: 0000007ffdac1978 ffffffe32b233f40 ffffff8393178dcc 0000000000000003 7d60: 000000000000011d 000000000000001d ffffffe32b23f110 000000000000029e 7d80: ffffffe34fe8d5d0 0000000000000000 ffffffe32bda7e14 cb88537fdc8ba600 7da0: ffffffe32bda7e30 ffffff8393042cfc ffffff8393c41720 ffffff8393c46410 7dc0: ffffff839304fa68 ffffffe32b233f40 0000000000005425 0000007ffdac1978 7de0: 000000000000011d cb88537fdc8ba600 ffffffe32bda7e70 ffffff8392fa60cc 7e00: 0000000000000000 ffffffe32b233f40 ffffffe32b233f40 0000000000000003 7e20: 0000000000005425 0000007ffdac1978 ffffffe32bda7e70 ffffff8392fa60b0 7e40: 0000000000000280 ffffffe32b233f40 ffffffe32b233f40 0000000000000003 7e60: 0000000000005425 cb88537fdc8ba600 0000000000000000 ffffff8392e02e78 7e80: 0000000000000280 0000005fbc5b0000 ffffffffffffffff 0000007f92ae9d3c 7ea0: 0000000060000000 0000000000000015 0000000000000003 0000000000005425 7ec0: 0000007ffdac1978 0000000000000000 00000000a54c910e 0000007f92b95014 7ee0: 0000007f92b95090 0000000052a64887 000000000000001d 0000000000000078 7f00: 0000007ffdac1708 0000000000000020 0000000000000000 0000000000000000 7f20: 0000000000000000 0000000000000010 000000556acf0090 0000007f92ae9d30 7f40: 0000000000000004 000000556acdef10 0000000000000000 000000556acdebd0 7f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 7f80: 0000000000000000 0000000000000000 0000000000000000 0000007ffdac1840 7fa0: 000000556acdedcc 0000007ffdac1840 0000007f92ae9d3c 0000000060000000 7fc0: 0000000000000000 0000000000000000 0000000000000003 000000000000001d 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 Call trace: Exception stack(0xffffffe32bda7ab0 to 0xffffffe32bda7bf0) 7aa0: 0000000000001000 0000007fffffffff 7ac0: ffffffe32bda7cc0 ffffff8393196098 0000000080000005 0000000000000025 7ae0: ffffffe32b233f40 ffffff83930d777c ffffffe32bda7b30 ffffff83930d777c 7b00: ffffffe32bda7be0 ffffff83938d5000 ffffffe32bda7be0 ffffffe32bda7c20 7b20: ffffffe32bda7b60 ffffff83930d777c ffffffe32bda7c10 ffffff83938d5000 7b40: ffffffe32bda7c10 ffffffe32bda7c50 ffffff8393c0a000 ffffffe32b23f110 7b60: ffffffe32bda7b70 ffffff8392e09df4 ffffffe32bda7bb0 cb88537fdc8ba600 7b80: ffffff83934428f8 ffffffe32b23c040 0000000000000080 ffffff83938d5018 7ba0: 0000005fbc5b0000 ffffffe32b23c000 ffffffe32bda7e08 0000000052a64887 7bc0: 000000000000001d 0000000000000078 0000007ffdac1708 0000000000000020 7be0: 0000000000000000 0000000000000000 [<ffffff8393196098>] uart_break_ctl+0x44/0x84 [<ffffff8393177718>] send_break+0xa0/0x114 [<ffffff8393179a1c>] tty_ioctl+0xc50/0xe84 [<ffffff8392fa5a40>] do_vfs_ioctl+0xc4/0x6e8 [<ffffff8392fa60cc>] SyS_ioctl+0x68/0x9c [<ffffff8392e02e78>] __sys_trace_return+0x0/0x4 Code: b9410ea0 34000160 f9408aa0 f9402814 (b85fc280) ---[ end trace 8606094f1960c5e0 ]--- Kernel panic - not syncing: Fatal exception Fix this problem by adding NULL checks prior to calling break_ctl ops. Signed-off-by:
Jiangfeng Xiao <xiaojiangfeng@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1574263133-28259-1-git-send-email-xiaojiangfeng@huawei.comSigned-off-by:
-
Vincent Whitchurch authored
commit f6a19647 upstream. PL011's ->flush_buffer() implementation releases and reacquires the port lock. Due to a race condition here, data can end up being added to the circular buffer but neither being discarded nor being sent out. This leads to, for example, tcdrain(2) waiting indefinitely. Process A Process B uart_flush_buffer() - acquire lock - circ_clear - pl011_flush_buffer() -- release lock -- dmaengine_terminate_all() uart_write() - acquire lock - add chars to circ buffer - start_tx() -- start DMA - release lock -- acquire lock -- turn off DMA -- release lock // Data in circ buffer but DMA is off According to the comment in the code, the releasing of the lock around dmaengine_terminate_all() is to avoid a deadlock with the DMA engine callback. However, since the time this code was written, the DMA engine API documentation seems to have been clarified to say that dmaengine_terminate_all() (in the identically implemented but differently named dmaengine_terminate_async() variant) does not wait for any running complete callback to be completed and can even be called from a complete callback. So there is no possibility of deadlock if the DMA engine driver implements this API correctly. So we should be able to just remove this release and reacquire of the lock to prevent the aforementioned race condition. Signed-off-by:
-
Jeffrey Hugo authored
commit b027ce25 upstream. hci_qca interfaces to the wcn3990 via a uart_dm on the msm8998 mtp and Lenovo Miix 630 laptop. As part of initializing the wcn3990, hci_qca disables flow, configures the uart baudrate, and then reenables flow - at which point an event is expected to be received over the uart from the wcn3990. It is observed that this event comes after the baudrate change but before hci_qca re-enables flow. This is unexpected, and is a result of msm_reset() being broken. According to the uart_dm hardware documentation, it is recommended that automatic hardware flow control be enabled by setting RX_RDY_CTL. Auto hw flow control will manage RFR based on the configured watermark. When there is space to receive data, the hw will assert RFR. When the watermark is hit, the hw will de-assert RFR. The hardware documentation indicates that RFR can me manually managed via CR when RX_RDY_CTL is not set. SET_RFR asserts RFR, and RESET_RFR de-asserts RFR. msm_reset() is broken because after resetting the hardware, it unconditionally asserts RFR via SET_RFR. This enables flow regardless of the current configuration, and would undo a previous flow disable operation. It should instead de-assert RFR via RESET_RFR to block flow until the hardware is reconfigured. msm_serial should rely on the client to specify that flow should be enabled, either via mctrl() or the termios structure, and only assert RFR in response to those triggers. Fixes: 04896a77 ("msm_serial: serial driver for MSM7K onboard serial peripheral.") Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Andy Gross <agross@kernel.org> Link: https://lore.kernel.org/r/20191021154616.25457-1-jeffrey.l.hugo@gmail.comSigned-off-by:
-
