Skip to content

L
linux
Switch branch/tag
  1. 01 Oct, 2013 9 commits
    • David S. Miller's avatar
      Merge branch 'fixes-for-3.12' of git://gitorious.org/linux-can/linux-can · d9a71f97
      David S. Miller authored 
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9a71f97
    • Salam Noureddine's avatar
      ipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_put · 9260d3e1
      Salam Noureddine authored 
      It is possible for the timer handlers to run after the call to
ipv6_mc_down so use in6_dev_put instead of __in6_dev_put in the
handler function in order to do proper cleanup when the refcnt
reaches 0. Otherwise, the refcnt can reach zero without the
inet6_dev being destroyed and we end up leaking a reference to
the net_device and see messages like the following,

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Tested on linux-3.4.43.
Signed-off-by: default avatarSalam Noureddine <noureddine@aristanetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9260d3e1
    • Salam Noureddine's avatar
      ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put · e2401654
      Salam Noureddine authored 
      It is possible for the timer handlers to run after the call to
ip_mc_down so use in_dev_put instead of __in_dev_put in the handler
function in order to do proper cleanup when the refcnt reaches 0.
Otherwise, the refcnt can reach zero without the in_device being
destroyed and we end up leaking a reference to the net_device and
see messages like the following,

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Tested on linux-3.4.43.
Signed-off-by: default avatarSalam Noureddine <noureddine@aristanetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e2401654
    • Bartlomiej Zolnierkiewicz's avatar
      ethernet: moxa: fix incorrect placement of __initdata tag · 437a3ae1
      Bartlomiej Zolnierkiewicz authored 
      __initdata tag should be placed between the variable name and equal
sign for the variable to be placed in the intended .init.data section.

In this particular case __initdata is incorrect as moxart_mac_driver
can be used after the driver gets initialized.

Also while at it static-ize moxart_mac_driver.
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      437a3ae1
    • Hannes Frederic Sowa's avatar
      ipv6: gre: correct calculation of max_headroom · 3da812d8
      Hannes Frederic Sowa authored 
      gre_hlen already accounts for sizeof(struct ipv6_hdr) + gre header,
so initialize max_headroom to zero. Otherwise the

	if (encap_limit >= 0) {
		max_headroom += 8;
		mtu -= 8;
	}

increments an uninitialized variable before max_headroom was reset.

Found with coverity: 728539

Cc: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3da812d8
    • Aida Mynzhasova's avatar
      powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file · e58f6f4f
      Aida Mynzhasova authored 
      Currently IEEE 1588 timer reference clock source is determined through
hard-coded value in gianfar_ptp driver. This patch allows to select ptp
clock source by means of device tree file node.

For instance:

	fsl,cksel = <0>;

for using external (TSEC_TMR_CLK input) high precision timer
reference clock.

Other acceptable values:

	<1> : eTSEC system clock
	<2> : eTSEC1 transmit clock
	<3> : RTC clock input

When this attribute isn't used, eTSEC system clock will serve as
IEEE 1588 timer reference clock.
Signed-off-by: default avatarAida Mynzhasova <aida.mynzhasova@skitlab.ru>
Acked-by: default avatarKumar Gala <galak@codeaurora.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e58f6f4f
    • David S. Miller's avatar
      Revert "powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file" · 3f3f0960
      David S. Miller authored 
      This reverts commit 894116bd.

I applied the wrong version of this patch, correct
version coming up.
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3f3f0960
    • Neil Horman's avatar
      bonding: Fix broken promiscuity reference counting issue · 5a0068de
      Neil Horman authored 
      Recently grabbed this report:
https://bugzilla.redhat.com/show_bug.cgi?id=1005567

Of an issue in which the bonding driver, with an attached vlan encountered the
following errors when bond0 was taken down and back up:

dummy1: promiscuity touches roof, set promiscuity failed. promiscuity feature of
device might be broken.

The error occurs because, during __bond_release_one, if we release our last
slave, we take on a random mac address and issue a NETDEV_CHANGEADDR
notification.  With an attached vlan, the vlan may see that the vlan and bond
mac address were in sync, but no longer are.  This triggers a call to dev_uc_add
and dev_set_rx_mode, which enables IFF_PROMISC on the bond device.  Then, when
we complete __bond_release_one, we use the current state of the bond flags to
determine if we should decrement the promiscuity of the releasing slave.  But
since the bond changed promiscuity state during the release operation, we
incorrectly decrement the slave promisc count when it wasn't in promiscuous mode
to begin with, causing the above error

Fix is pretty simple, just cache the bonding flags at the start of the function
and use those when determining the need to set promiscuity.

This is also needed for the ALLMULTI flag

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Mark Wu <wudxw@linux.vnet.ibm.com>
CC: "David S. Miller" <davem@davemloft.net>
Reported-by: default avatarMark Wu <wudxw@linux.vnet.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a0068de
    • Eric Dumazet's avatar
      tcp: TSQ can use a dynamic limit · c9eeec26
      Eric Dumazet authored 
      When TCP Small Queues was added, we used a sysctl to limit amount of
packets queues on Qdisc/device queues for a given TCP flow.

Problem is this limit is either too big for low rates, or too small
for high rates.

Now TCP stack has rate estimation in sk->sk_pacing_rate, and TSO
auto sizing, it can better control number of packets in Qdisc/device
queues.

New limit is two packets or at least 1 to 2 ms worth of packets.

Low rates flows benefit from this patch by having even smaller
number of packets in queues, allowing for faster recovery,
better RTT estimations.

High rates flows benefit from this patch by allowing more than 2 packets
in flight as we had reports this was a limiting factor to reach line
rate. [ In particular if TX completion is delayed because of coalescing
parameters ]

Example for a single flow on 10Gbp link controlled by FQ/pacing

14 packets in flight instead of 2

$ tc -s -d qd
qdisc fq 8001: dev eth0 root refcnt 32 limit 10000p flow_limit 100p
buckets 1024 quantum 3028 initial_quantum 15140
 Sent 1168459366606 bytes 771822841 pkt (dropped 0, overlimits 0
requeues 6822476)
 rate 9346Mbit 771713pps backlog 953820b 14p requeues 6822476
  2047 flow, 2046 inactive, 1 throttled, delay 15673 ns
  2372 gc, 0 highprio, 0 retrans, 9739249 throttled, 0 flows_plimit

Note that sk_pacing_rate is currently set to twice the actual rate, but
this might be refined in the future when a flow is in congestion
avoidance.

Additional change : skb->destructor should be set to tcp_wfree().

A future patch (for linux 3.13+) might remove tcp_limit_output_bytes
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: default avatarNeal Cardwell <ncardwell@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c9eeec26
  3. 30 Sep, 2013 11 commits
  5. 28 Sep, 2013 4 commits
  7. 27 Sep, 2013 16 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7