Merge branches 'amba', 'devel-stable', 'fixes', 'mach-types', 'mmci', 'pci' and 'versatile' into for-linus

Commit ff9a184c ("ARM: 7400/1: vfp: clear fpscr length and stride bits
on entry to sig handler") flushes the VFP state prior to entering a
signal handler so that a VFP operation inside the handler will trap and
force a restore of ABI-compliant registers. Reflushing and disabling VFP
on the sigreturn path is predicated on the saved thread state indicating
that VFP was used by the handler -- however for SMP platforms this is
only set on context-switch, making the check unreliable and causing VFP
register corruption in userspace since the register values are not
necessarily those restored from the sigframe.

This patch unconditionally flushes the VFP state after a signal handler.
Since we already perform the flush before the handler and the flushing
itself happens lazily, the redundant flush when VFP is not used by the
handler is essentially a nop.
Reported-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

A zero value for prot_sect in the memory types table implies that
section mappings should never be created for the memory type in question.
This is checked for in alloc_init_section().

With LPAE, we set a bit to mask access flag faults for kernel mappings.
This breaks the aforementioned (!prot_sect) check in alloc_init_section().

This patch fixes this bug by first checking for a non-zero
prot_sect before setting the PMD_SECT_AF flag.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

No one uses the per-hw list of buses, so get rid of this.  Instead,
build the list locally.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Use sys->private_data to store the PCIe port data structure.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Cc: <stable@vger.kernel.org>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Most PCI implementations perform simple root bus scanning.  Rather than
having each group of platforms provide a duplicated bus scan function,
provide the PCI configuration ops structure via the hw_pci structure,
and call the root bus scanning function from core ARM PCI code.
Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Most PCI implementations use the standard PCI swizzle function, which
handles the well defined behaviour of PCI-to-PCI bridges which can be
found on cards (eg, four port ethernet cards.)

Rather than having almost every platform specify the standard swizzle
function, make this the default when no swizzle function is supplied.
Therefore, a swizzle function only needs to be provided when there is
something exceptional which needs to be handled.

This gets rid of the swizzle initializer from 47 files, and leaves us
with just two platforms specifying a swizzle function: ARM Integrator
and Chalice CATS.
Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This is at odds with the documentation in the file; it says pin 1 on
slots 24,25,26,27 map to IRQs 27,28,29,30, but the function will always
be entered with slot=0 due to the lack of swizzle function.  Fix this
function to behave as the comments say, and use the standard PCI
swizzle.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The Integrator swizzle function is almost the same as the standard PCI
swizzle, except for an initial check for pin = 0.  Make the integrator
swizzle function a wrapper around the standard PCI swizzle function so
we preseve this behaviour while using common code.

[fix to use pci_std_swizzle from Linus Walleij]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The vfp_enable function enables access to the VFP co-processor register
space (cp10 and cp11) on the current CPU and must be called with
preemption disabled. Unfortunately, the vfp_init late initcall does not
disable preemption and can lead to an oops during boot if thread
migration occurs at the wrong time and we end up attempting to access
the FPSID on a CPU with VFP access disabled.

This patch fixes the initcall to call vfp_enable from a non-preemptible
context on each CPU and adds a BUG_ON(preemptible) to ensure that any
similar problems are easily spotted in the future.

Cc: stable@vger.kernel.org
Reported-by: Hyungwoo Yang <hwoo.yang@gmail.com>
Signed-off-by: Hyungwoo Yang <hyungwooy@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Commit 4e8ee7de (ARM: SMP: use
idmap_pgd for mapping MMU enable during secondary booting)
switched secondary boot to use idmap_pgd, which is initialized
during early_initcall, instead of a page table initialized during
__cpu_up.  This causes idmap_pgd to contain the static mappings
but be missing all dynamic mappings.

If a console is registered that creates a dynamic mapping, the
printk in secondary_start_kernel will trigger a data abort on
the missing mapping before the exception handlers have been
initialized, leading to a hang.  Initial boot is not affected
because no consoles have been registered, and resume is usually
not affected because the offending console is suspended.
Onlining a cpu with hotplug triggers the problem.

A workaround is to the printk in secondary_start_kernel until
after the page tables have been switched back to init_mm.

Cc: <stable@vger.kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The machine endianness has no direct correspondence to the syscall ABI,
so use only AUDIT_ARCH_ARM when identifying the ABI to the audit tools
in userspace.

Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The ARM audit code incorrectly uses the saved application ip register
value to infer syscall entry or exit. Additionally, the saved value will
be clobbered if the current task is not being traced, which can lead to
libc corruption if ip is live (apparently glibc uses it for the TLS
pointer).

This patch fixes the syscall tracing code so that the why parameter is
used to infer the syscall direction and the saved ip is only updated if
we know that we will be signalling a ptrace trap.
Reported-and-Tested-by: Jon Masters <jcm@jonmasters.org>

Cc: stable@vger.kernel.org
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The inline assembly in kernel_execve() uses r8 and r9.  Since this
code sequence does not return, it usually doesn't matter if the
register clobber list is accurate.  However, I saw a case where a
particular version of gcc used r8 as an intermediate for the value
eventually passed to r9.  Because r8 is used in the inline
assembly, and not mentioned in the clobber list, r9 was set
to an incorrect value.

This resulted in a kernel panic on execution of the first user-space
program in the system.  r9 is used in ret_to_user as the thread_info
pointer, and if it's wrong, bad things happen.

Cc: <stable@vger.kernel.org>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The MMCI and PL022 SPI drivers sure need their platform data to
work on the Versatile as well. (This does not fix the auxdata for
MMCI instance mmc1 on the Versatile PB though.)

Cc: Niklas Hernaeus <niklas.hernaeus@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This does two things to the FPGA IRQ controller in the versatile
family:

- Convert to MULTI_IRQ_HANDLER so we can drop the entry macro
  from the Integrator. The C IRQ handler was inspired from
  arch/arm/common/vic.c, recent bug discovered in this handler was
  accounted for.
- Convert to using IRQ domains so we can get rid of the NO_IRQ
  mess and proceed with device tree and such stuff.

As part of the exercise, bump all the low IRQ numbers on the
Integrator PIC to start from 1 rather than 0, since IRQ 0 is
now NO_IRQ. The Linux IRQ numbers are thus entirely decoupled
from the hardware IRQ numbers in this controller.

I was unable to split this patch. The main reason is the half-done
conversion to device tree in Versatile.

Tested on Integrator/AP and Integrator/CP.

Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'timers-v3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable

Merge branch 'intr-ctxsw' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux into devel-stable

This gets rid of the last two users of NO_IRQ in AMBA primecell
drivers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull ARM fixes from Russell King.

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7406/1: hotplug: copy the affinity mask when forcefully migrating IRQs
  ARM: 7405/1: kexec: call platform_cpu_kill on the killer rather than the victim
  ARM: 7403/1: tls: remove covert channel via TPIDRURW
  ARM: 7401/1: mm: Fix section mismatches
  ARM: OMAP: fix DMA vs memory ordering
  ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs
  ARM: 7400/1: vfp: clear fpscr length and stride bits on entry to sig handler
  ARM: 7399/1: vfp: move user vfp state save/restore code out of signal.c
  ARM: 7398/1: l2x0: only write to debug registers on PL310
  ARM: 7397/1: l2x0: only apply workaround for erratum #753970 on PL310
  ARM: 7396/1: errata: only handle ARM erratum #326103 on affected cores

Pull SCSI fixes from James Bottomley:
 "This is a set of SAS and SATA fixes; there are one or two longstanding
  bug fixes, but most of this is regression fixes."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] libfc: update mfs boundry checking
  [SCSI] Revert "[SCSI] libsas: fix sas port naming"
  [SCSI] libsas: fix false positive 'device attached' conditions
  [SCSI] libsas, libata: fix start of life for a sas ata_port
  [SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready
  [SCSI] libsas: unify domain_device sas_rphy lifetimes
  [SCSI] libsas: fix sas_get_port_device regression
  [SCSI] libsas: fix sas_find_bcast_phy() in the presence of 'vacant' phys
  [SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_work
  [SCSI] libata: Pass correct DMA device to scsi host
  [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue

A common flaw in UEFI systems is a refusal to POST triggered by a malformed
boot variable. Once in this state, machines may only be restored by
reflashing their firmware with an external hardware device. While this is
obviously a firmware bug, the serious nature of the outcome suggests that
operating systems should filter their variable writes in order to prevent
a malicious user from rendering the machine unusable.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

More recent versions of the UEFI spec have added new attributes for
variables. Add them.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix printk format warnings -- both items are size_t,
so use %zu to print them.

fs/nfsd/nfs4recover.c:580:3: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'
fs/nfsd/nfs4recover.c:580:3: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull powerpc fixes from Benjamin Herrenschmidt:
 "Here are a handful more fixes for powerpc.  The irq stuff are all
  regression fixes, and Gavin's patch is a simple compile fix."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  tty/serial/pmac_zilog: Fix "nobody cared" IRQ message
  powerpc/pseries: Rivet CONFIG_EEH for pSeries platform
  powerpc/irqdomain: Fix broken NR_IRQ references
  powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller

Pull input fix from Dmitry Torokhov:
 "A simple fix for a recent regression in Synaptics driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - fix regression with "image sensor" trackpads

Following commit a79dd5ae titled "tty/serial/pmac_zilog: Fix suspend & resume",
my Powerbook G4 Titanium showed the following stack dump:

[   36.878225] irq 23: nobody cared (try booting with the "irqpoll" option)
[   36.878251] Call Trace:
[   36.878291] [dfff3f00] [c000984c] show_stack+0x7c/0x194 (unreliable)
[   36.878322] [dfff3f40] [c00a6868] __report_bad_irq+0x44/0xf4
[   36.878339] [dfff3f60] [c00a6b04] note_interrupt+0x1ec/0x2ac
[   36.878356] [dfff3f80] [c00a48d0] handle_irq_event_percpu+0x250/0x2b8
[   36.878372] [dfff3fd0] [c00a496c] handle_irq_event+0x34/0x54
[   36.878389] [dfff3fe0] [c00a753c] handle_fasteoi_irq+0xb4/0x124
[   36.878412] [dfff3ff0] [c000f5bc] call_handle_irq+0x18/0x28
[   36.878428] [deef1f10] [c000719c] do_IRQ+0x114/0x1cc
[   36.878446] [deef1f40] [c0015868] ret_from_except+0x0/0x1c
[   36.878484] --- Exception: 501 at 0xf497610
[   36.878489]     LR = 0xfdc3dd0
[   36.878497] handlers:
[   36.878510] [<c02b7424>] pmz_interrupt
[   36.878520] Disabling IRQ #23

From an E-mail exchange about this problem, Andreas Schwab noticed a typo
that resulted in the wrong condition being tested.

The patch also corrects 2 typos that incorrectly report why an error branch
is being taken.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Recently, Ryan Wang tried to compile PPC pSeries platform without
CONFIG_EEH and eventually run into errors. Nishanth Aravamudan
helped to narrow down the root cause. Actually, the pSeries platform
depends on CONFIG_EEH heavily and that won't work properly without
EEH support.

According to Ben's suggestion, the patch make CONFIG_EEH invisible
and keep it as always selected on pSeries platform.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The switch from using irq_map to irq_alloc_desc*() for managing irq
number allocations introduced new bugs in some of the powerpc
interrupt code.  Several functions rely on the value of NR_IRQS to
determine the maximum irq number that could get allocated.  However,
with sparse_irq and using irq_alloc_desc*() the maximum possible irq
number is now specified with 'nr_irqs' which may be a number larger
than NR_IRQS.  This has caused breakage on powermac when
CONFIG_NR_IRQS is set to 32.

This patch removes most of the direct references to NR_IRQS in the
powerpc code and replaces them with either a nr_irqs reference or by
using the common for_each_irq_desc() macro.  The powerpc-specific
for_each_irq() macro is removed at the same time.

Also, the Cell axon_msi driver is refactored to remove the global
build assumption on the size of NR_IRQS and instead add a limit to the
maximum irq number when calling irq_domain_add_nomap().
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The mpc8xx driver uses a reference to NR_IRQS that is buggy.  It uses
NR_IRQs for the array size of the ppc_cached_irq_mask bitmap, but
NR_IRQs could be smaller than the number of hardware irqs that
ppc_cached_irq_mask tracks.

Also, while fixing that problem, it became apparent that the interrupt
controller only supports 32 interrupt numbers, but it is written as if
it supports multiple register banks which is more complicated.

This patch pulls out the buggy reference to NR_IRQs and fixes the size
of the ppc_cached_irq_mask to match the number of HW irqs.  It also
drops the now-unnecessary code since ppc_cached_irq_mask is no longer
an array.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull power management fixes from Rafael J. Wysocki:
 "Fix for an issue causing hibernation to hang on systems with highmem
  (that practically means i386) due to broken memory management (bug
  introduced in 3.2, so -stable material) and PM documentation update
  making the freezer documentation follow the code again after some
  recent updates."

* tag 'pm-for-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Freezer / Docs: Update documentation about freezing of tasks
  PM / Hibernate: fix the number of pages used for hibernate/thaw buffering

The autofs packet size has had a very unfortunate size problem on x86:
because the alignment of 'u64' differs in 32-bit and 64-bit modes, and
because the packet data was not 8-byte aligned, the size of the autofsv5
packet structure differed between 32-bit and 64-bit modes despite
looking otherwise identical (300 vs 304 bytes respectively).

We first fixed that up by making the 64-bit compat mode know about this
problem in commit a32744d4 ("autofs: work around unhappy compat
problem on x86-64"), and that made a 32-bit 'systemd' work happily on a
64-bit kernel because everything then worked the same way as on a 32-bit
kernel.

But it turned out that 'automount' had actually known and worked around
this problem in user space, so fixing the kernel to do the proper 32-bit
compatibility handling actually *broke* 32-bit automount on a 64-bit
kernel, because it knew that the packet sizes were wrong and expected
those incorrect sizes.

As a result, we ended up reverting that compatibility mode fix, and
thus breaking systemd again, in commit fcbf94b9.

With both automount and systemd doing a single read() system call, and
verifying that they get *exactly* the size they expect but using
different sizes, it seemed that fixing one of them inevitably seemed to
break the other.  At one point, a patch I seriously considered applying
from Michael Tokarev did a "strcmp()" to see if it was automount that
was doing the operation.  Ugly, ugly.

However, a prettier solution exists now thanks to the packetized pipe
mode.  By marking the communication pipe as being packetized (by simply
setting the O_DIRECT flag), we can always just write the bigger packet
size, and if user-space does a smaller read, it will just get that
partial end result and the extra alignment padding will simply be thrown
away.

This makes both automount and systemd happy, since they now get the size
they asked for, and the kernel side of autofs simply no longer needs to
care - it could pad out the packet arbitrarily.

Of course, if there is some *other* user of autofs (please, please,
please tell me it ain't so - and we haven't heard of any) that tries to
read the packets with multiple writes, that other user will now be
broken - the whole point of the packetized mode is that one system call
gets exactly one packet, and you cannot read a packet in pieces.
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Ian Kent <raven@themaw.net>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The file Documentation/power/freezing-of-tasks.txt was still referencing
the TIF_FREEZE flag, that was removed by the commit
d88e4cb6(freezer: remove now unused
TIF_FREEZE).

This patch removes all the references of TIF_FREEZE that were left
behind.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The actual internal pipe implementation is already really about
individual packets (called "pipe buffers"), and this simply exposes that
as a special packetized mode.

When we are in the packetized mode (marked by O_DIRECT as suggested by
Alan Cox), a write() on a pipe will not merge the new data with previous
writes, so each write will get a pipe buffer of its own.  The pipe
buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn
will tell the reader side to break the read at that boundary (and throw
away any partial packet contents that do not fit in the read buffer).

End result: as long as you do writes less than PIPE_BUF in size (so that
the pipe doesn't have to split them up), you can now treat the pipe as a
packet interface, where each read() system call will read one packet at
a time.  You can just use a sufficiently big read buffer (PIPE_BUF is
sufficient, since bigger than that doesn't guarantee atomicity anyway),
and the return value of the read() will naturally give you the size of
the packet.

NOTE! We do not support zero-sized packets, and zero-sized reads and
writes to a pipe continue to be no-ops.  Also note that big packets will
currently be split at write time, but that the size at which that
happens is not really specified (except that it's bigger than PIPE_BUF).
Currently that limit is the system page size, but we might want to
explicitly support bigger packets some day.

The main user for this is going to be the autofs packet interface,
allowing us to stop having to care so deeply about exact packet sizes
(which have had bugs with 32/64-bit compatibility modes).  But user
space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will
fail with an EINVAL on kernels that do not support this interface.
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Ian Kent <raven@themaw.net>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: stable@kernel.org  # needed for systemd/autofs interaction fix
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are some tiny drivers/staging/ bugfixes.  Some build fixes that
  were recently reported, as well as one kfree bug that is hitting a
  number of users."

* tag 'staging-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ozwpan: Fix bug where kfree is called twice.
  staging: octeon-ethernet: fix build errors by including interrupt.h
  staging: zcache: fix Kconfig crypto dependency
  staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of small USB fixes for 3.4-rc5.

  Nothing major, as before, some USB gadget fixes.  There's a crash fix
  for a number of ASUS laptops on resume that had been reported by a
  number of different people.  We think the fix might also pertain to
  other machines, as this was a BIOS bug, and they seem to travel to
  different models and manufacturers quite easily.  Other than that,
  some other reported problems fixed as well."

* tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc-core: fix incompatibility with dummy-hcd
  usb: gadget: udc-core: fix wrong call order
  USB: cdc-wdm: fix race leading leading to memory corruption
  USB: EHCI: fix crash during suspend on ASUS computers
  usb gadget: uvc: uvc_request_data::length field must be signed
  usb: gadget: dummy: do not call pullup() on udc_stop()
  usb: musb: davinci.c: add missing unregister
  usb: musb: drop __deprecated flag
  USB: gadget: storage gadgets send wrong error code for unknown commands
  usb: otg: gpio_vbus: Add otg transceiver events and notifiers

Pull btrfs fixes from Chris Mason:
 "This has our collection of bug fixes.  I missed the last rc because I
  thought our patches were making NFS crash during my xfs test runs.
  Turns out it was an NFS client bug fixed by someone else while I tried
  to bisect it.

  All of these fixes are small, but some are fairly high impact.  The
  biggest are fixes for our mount -o remount handling, a deadlock due to
  GFP_KERNEL allocations in readdir, and a RAID10 error handling bug.

  This was tested against both 3.3 and Linus' master as of this morning."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (26 commits)
  Btrfs: reduce lock contention during extent insertion
  Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir
  Btrfs: Fix space checking during fs resize
  Btrfs: fix block_rsv and space_info lock ordering
  Btrfs: Prevent root_list corruption
  Btrfs: fix repair code for RAID10
  Btrfs: do not start delalloc inodes during sync
  Btrfs: fix that check_int_data mount option was ignored
  Btrfs: don't count CRC or header errors twice while scrubbing
  Btrfs: fix btrfs_ioctl_dev_info() crash on missing device
  btrfs: don't return EINTR
  Btrfs: double unlock bug in error handling
  Btrfs: always store the mirror we read the eb from
  fs/btrfs/volumes.c: add missing free_fs_devices
  btrfs: fix early abort in 'remount'
  Btrfs: fix max chunk size check in chunk allocator
  Btrfs: add missing read locks in backref.c
  Btrfs: don't call free_extent_buffer twice in iterate_irefs
  Btrfs: Make free_ipath() deal gracefully with NULL pointers
  Btrfs: avoid possible use-after-free in clear_extent_bit()
  ...

Pull ARM SoC fixes from Olof Johansson:
 "Nothing controversial, just another batch of fixes:

   - Samsung/exynos fixes for more merge window fallout: build errors
     and warnings mostly, but also some clock/device setup issues on
     exynos4/5
   - PXA bug and warning fixes related to gpio and pinmux
   - IRQ domain conversion bugfixes for U300 and MSM
   - A regulator setup fix for U300"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: PXA2xx: MFP: fix potential direction bug
  ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT
  arm/sa1100: fix sa1100-rtc memory resource
  ARM: pxa: fix gpio wakeup setting
  ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability
  ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined
  ARM: EXYNOS: Fix resource on dev-dwmci.c
  ARM: S3C24XX: Fix build warning for S3C2410_PM
  ARM: mini2440_defconfig: Fix build error
  ARM: msm: Fix gic irqdomain support
  ARM: EXYNOS: Fix incorrect initialization of GIC
  ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers
  ARM: u300: bump all IRQ numbers by one
  ARM: ux300: Fix unimplementable regulation constraints