- 22 Dec, 2015 7 commits
-
-
Bruce Allan authored
Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
These structures never change so declare them as const. Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
-
Jacob Keller authored
When comparing MAC addresses, use ether_addr_equal instead of memcmp to ETH_ALEN length. Found and replaced using the following sed: sed -e 's/memcmp\x28\(.*\), ETH_ALEN\x29/!ether_addr_equal\x28\1\x29/' Reported-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
-
Alexander Duyck authored
This patch is meant to cleanup the exception handling for the paths where we reset the interrupts and then reconfigure them. In all of these paths we had very different levels of exception handling. I have updated the driver so that all of the paths should result in a similar state if we fail. Specifically the driver will now unload the mailbox interrupt, free the queue vectors and MSI-X, and then detach the interface. In addition for any of the PCIe related resets I have added a check with the hw_ready function to just make sure the registers are in a readable state prior to reopening the interface. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Reviewed-by:
-
Jacob Keller authored
The TLV format for little endian structures is actually 4 byte aligned copy. To this end, we need to add an additional __aligned(4) marker along with __packed to ensure that these structures are actually 4 byte aligned and packed correctly. Use of just __packed will not work as this will result in 1byte alignment which is incorrect. Add a comment explaining the reasoning behind why these structures need the special treatment. Signed-off-by:
-
Bruce Allan authored
Cleans up checkpatch GLOBAL_INITIALIZERS error Signed-off-by:
-
- 20 Dec, 2015 1 commit
-
-
Nicholas Mc Guire authored
This is an API consolidation only. The use of kmalloc + memset to 0 is equivalent to kcalloc in this case as it is allocating an array of elements. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 19 Dec, 2015 1 commit
-
-
Arnd Bergmann authored
A cleanup patch I did was unfortunately wrong and introduced multiple serious bugs in the netcp rx processing, as indicated by these correct gcc warnings: drivers/net/ethernet/ti/netcp_core.c:776:14: warning: 'buf_ptr' may be used uninitialized in this function [-Wuninitialized] drivers/net/ethernet/ti/netcp_core.c:687:14: warning: 'ptr' may be used uninitialized in this function [-Wuninitialized] I have checked the patch once more and found that a call to get_pkt_info() accidentally got removed in netcp_free_rx_desc_chain, and netcp_process_one_rx_packet no longer retrieved the correct buffer length. This patch should fix all the known problems, but I did not test on real hardware. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 89907779 ("netcp: try to reduce type confusion in descriptors") Signed-off-by:
-
- 18 Dec, 2015 17 commits
-
-
stephen hemminger authored
Since it is possible for an external system to send oversize packets at anytime, it is best for driver not to print a message and spam the log (potential external DoS). Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=109471Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Eric Dumazet authored
Adding support for SYN_RECV request sockets to tcp_abort() is quite easy after our tcp listener rewrite. Note that we also need to better handle listeners, or we might leak not yet accepted children, because of a missing inet_csk_listen_stop() call. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Tested-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Misc BPF updates This series contains a couple of misc updates to the BPF code, besides others a new helper bpf_skb_load_bytes(), moving clearing of A/X to the classic converter, etc. Please see individual patches for details. Thanks! ==================== Signed-off-by: -
Daniel Borkmann authored
Add couple of test cases for interpreter but also JITs, f.e. to test that when imm32 moves are being done, upper 32bits of the regs are being zero extended. Without JIT: [...] [ 1114.129301] test_bpf: #43 MOV REG64 jited:0 128 PASS [ 1114.130626] test_bpf: #44 MOV REG32 jited:0 139 PASS [ 1114.132055] test_bpf: #45 LD IMM64 jited:0 124 PASS [...] With JIT (generated code can as usual be nicely verified with the help of bpf_jit_disasm tool): [...] [ 1062.726782] test_bpf: #43 MOV REG64 jited:1 6 PASS [ 1062.726890] test_bpf: #44 MOV REG32 jited:1 6 PASS [ 1062.726993] test_bpf: #45 LD IMM64 jited:1 6 PASS [...] Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
When sometimes structs or variables need to be initialized/'memset' to 0 in an eBPF C program, the x86 BPF JIT converts this to use immediates. We can however save a couple of bytes (f.e. even up to 7 bytes on a single emmission of BPF_LD | BPF_IMM | BPF_DW) in the image by detecting such case and use xor on the dst register instead. Signed-off-by:
-
Daniel Borkmann authored
Comment says "User BPF's register A is mapped to our BPF register 6", which is actually wrong as the mapping is on register 0. This can already be inferred from the code itself. So just remove it before someone makes assumptions based on that. Only code tells truth. ;) Signed-off-by:
-
Daniel Borkmann authored
Back in the days where eBPF (or back then "internal BPF" ;->) was not exposed to user space, and only the classic BPF programs internally translated into eBPF programs, we missed the fact that for classic BPF A and X needed to be cleared. It was fixed back then via 83d5b7ef ("net: filter: initialize A and X registers"), and thus classic BPF specifics were added to the eBPF interpreter core to work around it. This added some confusion for JIT developers later on that take the eBPF interpreter code as an example for deriving their JIT. F.e. in f75298f5 ("s390/bpf: clear correct BPF accumulator register"), at least X could leak stack memory. Furthermore, since this is only needed for classic BPF translations and not for eBPF (verifier takes care that read access to regs cannot be done uninitialized), more complexity is added to JITs as they need to determine whether they deal with migrations or native eBPF where they can just omit clearing A/X in their prologue and thus reduce image size a bit, see f.e. cde66c2d ("s390/bpf: Only clear A and X for converted BPF programs"). In other cases (x86, arm64), A and X is being cleared in the prologue also for eBPF case, which is unnecessary. Lets move this into the BPF migration in bpf_convert_filter() where it actually belongs as long as the number of eBPF JITs are still few. It can thus be done generically; allowing us to remove the quirk from __bpf_prog_run() and to slightly reduce JIT image size in case of eBPF, while reducing code duplication on this matter in current(/future) eBPF JITs. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Tested-by:
Yang Shi <yang.shi@linaro.org> Acked-by:
Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
When hacking tc programs with eBPF, one of the issues that come up from time to time is to load addresses from headers. In eBPF as in classic BPF, we have BPF_LD | BPF_ABS | BPF_{B,H,W} instructions that extract a byte, half-word or word out of the skb data though helpers such as bpf_load_pointer() (interpreter case). F.e. extracting a whole IPv6 address could possibly look like ... union v6addr { struct { __u32 p1; __u32 p2; __u32 p3; __u32 p4; }; __u8 addr[16]; }; [...] a.p1 = htonl(load_word(skb, off)); a.p2 = htonl(load_word(skb, off + 4)); a.p3 = htonl(load_word(skb, off + 8)); a.p4 = htonl(load_word(skb, off + 12)); [...] /* access to a.addr[...] */ This work adds a complementary helper bpf_skb_load_bytes() (we also have bpf_skb_store_bytes()) as an alternative where the same call would look like from an eBPF program: ret = bpf_skb_load_bytes(skb, off, addr, sizeof(addr)); Same verifier restrictions apply as in ffeedafb ("bpf: introduce current->pid, tgid, uid, gid, comm accessors") case, where stack memory access needs to be statically verified and thus guaranteed to be initialized in first use (otherwise verifier cannot tell whether a subsequent access to it is valid or not as it's runtime dependent). Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains the first batch of Netfilter updates for the upcoming 4.5 kernel. This batch contains userspace netfilter header compilation fixes, support for packet mangling in nf_tables, the new tracing infrastructure for nf_tables and cgroup2 support for iptables. More specifically, they are: 1) Two patches to include dependencies in our netfilter userspace headers to resolve compilation problems, from Mikko Rapeli. 2) Four comestic cleanup patches for the ebtables codebase, from Ian Morris. 3) Remove duplicate include in the netfilter reject infrastructure, from Stephen Hemminger. 4) Two patches to simplify the netfilter defragmentation code for IPv6, patch from Florian Westphal. 5) Fix root ownership of /proc/net netfilter for unpriviledged net namespaces, from Philip Whineray. 6) Get rid of unused fields in struct nft_pktinfo, from Florian Westphal. 7) Add mangling support to our nf_tables payload expression, from Patrick McHardy. 8) Introduce a new netlink-based tracing infrastructure for nf_tables, from Florian Westphal. 9) Change setter functions in nfnetlink_log to be void, from Rami Rosen. 10) Add netns support to the cttimeout infrastructure. 11) Add cgroup2 support to iptables, from Tejun Heo. 12) Introduce nfnl_dereference_protected() in nfnetlink, from Florian. 13) Add support for mangling pkttype in the nf_tables meta expression, also from Florian. BTW, I need that you pull net into net-next, I have another batch that requires changes that I don't yet see in net. ==================== Signed-off-by: -
Jakub Kicinski authored
Netdevs default to carrier on, we should call netif_carrier_off() during initialization since we handle carrier state changes in the driver. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Rolf Neugebauer <rolf.neugebauer@netronome.com> Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: Allow accepted sockets to be bound to l3mdev domain Allow accepted sockets to derive their sk_bound_dev_if setting from the l3mdev domain in which the packets originated. This version adds a sysctl to control whether the setting is inherited, making the functionality similar to sk_mark and its sysctl_tcp_fwmark_accept setting. This effectively allow a process to have a "VRF-global" listen socket, with child sockets bound to the VRF device in which the packet originated. A similar behavior can be achieved using sk_mark, but a solution using marks is incomplete as it does not handle duplicate addresses in different L3 domains/VRFs. Allowing sockets to inherit the sk_bound_dev_if from l3mdev domain provides a complete solution. ==================== Signed-off-by: -
David Ahern authored
Allow accepted sockets to derive their sk_bound_dev_if setting from the l3mdev domain in which the packets originated. A sysctl setting is added to control the behavior which is similar to sk_mark and sysctl_tcp_fwmark_accept. This effectively allow a process to have a "VRF-global" listen socket, with child sockets bound to the VRF device in which the packet originated. A similar behavior can be achieved using sk_mark, but a solution using marks is incomplete as it does not handle duplicate addresses in different L3 domains/VRFs. Allowing sockets to inherit the sk_bound_dev_if from l3mdev domain provides a complete solution. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
Add helper to lookup l3mdev master index given a device index. Signed-off-by:
-
Bjørn Mork authored
Add a new address generator mode, using the stable address generator with an automatically generated secret. This is intended as a default address generator mode for device types with no EUI64 implementation. The new generator is used for ARPHRD_NONE interfaces initially, adding default IPv6 autoconf support to e.g. tun interfaces. If the addrgenmode is set to 'random', either by default or manually, and no stable secret is available, then a random secret is used as input for the stable-privacy address generator. The secret can be read and modified like manually configured secrets, using the proc interface. Modifying the secret will change the addrgen mode to 'stable-privacy' to indicate that it operates on a known secret. Existing behaviour of the 'stable-privacy' mode is kept unchanged. If a known secret is available when the device is created, then the mode will default to 'stable-privacy' as before. The mode can be manually set to 'random' but it will behave exactly like 'stable-privacy' in this case. The secret will not change. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: 吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Arnd Bergmann authored
The recently added generic ILA translation facility fails to build when CONFIG_NETFILTER is disabled: net/ipv6/ila/ila_xlat.c:229:20: warning: 'struct nf_hook_state' declared inside parameter list net/ipv6/ila/ila_xlat.c:235:27: error: array type has incomplete element type 'struct nf_hook_ops' static struct nf_hook_ops ila_nf_hook_ops[] __read_mostly = { This adds an explicit Kconfig dependency to avoid that case. Signed-off-by: -
Florian Westphal authored
This allows to redirect bridged packets to local machine: ether type ip ether daddr set aa:53:08:12:34:56 meta pkttype set unicast Without 'set unicast', ip stack discards PACKET_OTHERHOST skbs. It is also useful to add support for a '-m cluster like' nft rule (where switch floods packets to several nodes, and each cluster node node processes a subset of packets for load distribution). Mangling is restricted to HOST/OTHER/BROAD/MULTICAST, i.e. you cannot set skb->pkt_type to PACKET_KERNEL or change PACKET_LOOPBACK to PACKET_HOST. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by:
-
- 17 Dec, 2015 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of people reported this... From Arnd Bergmann. 2) Don't init mutex twice in i40e driver, from Jesse Brandeburg. 3) Fix spurious EBUSY in rhashtable, from Herbert Xu. 4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas. 5) Fix race with work structure access in pppoe driver causing corruptions, from Guillaume Nault. 6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb() actually succeeded or not, from Sergei Shtylyov. 7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from Bjørn Mork. 8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc. 9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo Leitner. 10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven. 11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling properly as well, from Jiri Benc. 12) Handle request sockets properly in xfrm layer, from Eric Dumazet. 13) Double stats update in ipv6 geneve transmit path, fix from Pravin B Shelar. 14) sk->sk_policy[] needs RCU protection, and as a result xfrm_policy_destroy() needs to free policies using an RCU grace period, from Eric Dumazet. 15) SCTP needs to clone ipv6 tx options in order to avoid use after free, from Eric Dumazet. 16) Missing kbuild export if ila.h, from Stephen Hemminger. 17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from Tobias Klauser. 18) Validate protocol value range in ->create() methods, from Hannes Frederic Sowa. 19) Fix early socket demux races that result in illegal dst reuse, from Eric Dumazet. 20) Validate socket address length in pptp code, from WANG Cong. 21) skb_reorder_vlan_header() uses incorrect offset and can corrupt packets, from Vlad Yasevich. 22) Fix memory leaks in nl80211 registry code, from Ola Olsson. 23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and qlcnic. From Dan Carpenter. 24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for example, AF_ALG will interpret it as an async call. From Tadeusz Struk. 25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from Eric Dumazet. 26) rhashtable enforces the minimum table size not early enough, breaking how we calculate the per-cpu lock allocations. From Herbert Xu. 27) Fix FCC port lockup in 82xx driver, from Martin Roth. 28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa. 29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and sock_setsockopt() wrt. timestamp handling. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits) net: check both type and procotol for tcp sockets drivers: net: xgene: fix Tx flow control tcp: restore fastopen with no data in SYN packet af_unix: Revert 'lock_interruptible' in stream receive code fou: clean up socket with kfree_rcu 82xx: FCC: Fixing a bug causing to FCC port lock-up gianfar: Don't enable RX Filer if not supported net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration rhashtable: Fix walker list corruption rhashtable: Enforce minimum size on initial hash table inet: tcp: fix inetpeer_set_addr_v4() ipv6: automatically enable stable privacy mode if stable_secret set net: fix uninitialized variable issue bluetooth: Validate socket address length in sco_sock_bind(). net_sched: make qdisc_tree_decrease_qlen() work for non mq ser_gigaset: remove unnecessary kfree() calls from release method ser_gigaset: fix deallocation of platform device structure ser_gigaset: turn nonsense checks into WARN_ON ser_gigaset: fix up NULL checks qlcnic: fix a timeout loop ... -
Eran Ben Elisha authored
When the underlying device supports offloads encapulated traffic, we need to reflect that through the hw_enc_features field of the team net-device. This will cause the xmit path in the core networking stack to provide team with encapsulated GSO frames to offload into the HW etc. Using this over Mellanox ConnectX3-pro (mlx4 driver) card that supports VXLAN offloads we got 36.0 Gbits/sec using eight iperf streams. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Bjørn Mork authored
The CDC descriptors found on these vendor specific functions should not be considered authoritative. They seem to be ignored by drivers for other systems, and the quality is therefore low. One device (1e0e:9001) has been reported to have such a bogus union descriptor on the QMI function, making it fail probing even if the device id was dynamically added. The report was not complete enough to allow adding a device entry for this modem. But this should at least fix the dynamic id probing problem. Reported-by:
Kanerva Topi <Topi.Kanerva@cinia.fi> Signed-off-by:
-
Gregory CLEMENT authored
Instead of being at the MAC level the reset gpio preperty is moved at the PHY child node level. It is still managed by the MAC, but from the point of view of the binding it make more sense to be part of the PHY node. This commit also fixes a build errors if GPIOLIB is not selected. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Few l2 table related enhancements for cxgb4 This series adds a new API to allocate and update l2t entry, replaces arpq_head/arpq_tail with double skb double linked list. Use t4_mgmt_tx() to send control packets of l2t write request. Use symbolic constants while calculating vlan priority. This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. Thanks V2: Remove unnecessary MAS operation while calculating vlan prio in PATCH 1/4 ("cxgb4: Use symbolic constant for VLAN priority calculation") based on review comment by David Miller ==================== Signed-off-by: -
Hariprasad Shenai authored
Based on original work by Michael Werner <werner@chelsio.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Based on original work by Michael Werner <werner@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Based on original work by Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
WANG Cong authored
Dmitry reported the following out-of-bound access: Call Trace: [<ffffffff816cec2e>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:294 [<ffffffff84affb14>] sock_setsockopt+0x1284/0x13d0 net/core/sock.c:880 [< inline >] SYSC_setsockopt net/socket.c:1746 [<ffffffff84aed7ee>] SyS_setsockopt+0x1fe/0x240 net/socket.c:1729 [<ffffffff85c18c76>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 This is because we mistake a raw socket as a tcp socket. We should check both sk->sk_type and sk->sk_protocol to ensure it is a tcp socket. Willem points out __skb_complete_tx_timestamp() needs to fix as well. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Iyappan Subramanian authored
Currently the Tx flow control is based on reading the hardware state, which is not accurate since it may not reflect the descriptors that are not yet reached the memory. To accurately control the Tx flow, changing it to be software based. Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
-
Eric Dumazet authored
Yuchung tracked a regression caused by commit 57be5bda ("ip: convert tcp_sendmsg() to iov_iter primitives") for TCP Fast Open. Some Fast Open users do not actually add any data in the SYN packet. Fixes: 57be5bda ("ip: convert tcp_sendmsg() to iov_iter primitives") Reported-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Rainer Weikusat authored
With b3ca9b02, the AF_UNIX SOCK_STREAM receive code was changed from using mutex_lock(&u->readlock) to mutex_lock_interruptible(&u->readlock) to prevent signals from being delayed for an indefinite time if a thread sleeping on the mutex happened to be selected for handling the signal. But this was never a problem with the stream receive code (as opposed to its datagram counterpart) as that never went to sleep waiting for new messages with the mutex held and thus, wouldn't cause secondary readers to block on the mutex waiting for the sleeping primary reader. As the interruptible locking makes the code more complicated in exchange for no benefit, change it back to using mutex_lock. Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by:
-
Jakub Kicinski authored
We need to clear delayed kick counters when we free rings otherwise after ndo_close()/ndo_open() we could kick HW by more entries than actually written to rings. Signed-off-by:
-
