This patch changes the compatibility string to match with the smallest
supported chip (EP7209). Since the DT-support for this CPU is not yet
announced, this change is safe.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch changes the compatibility string to match with the smallest
supported chip (EP7209). Since the DT-support for this CPU is not yet
announced, this change is safe.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch changes the compatibility string to match with the smallest
supported chip (EP7209). Since the DT-support for this CPU is not yet
announced, this change is safe.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch changes the compatibility string to match with the smallest
supported chip (EP7209). Since the DT-support for this CPU is not yet
announced, this change is safe.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch changes the compatibility string to match with the smallest
supported chip (EP7209). Since the DT-support for this CPU is not yet
announced, this change is safe.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch changes the compatibility string to match with the smallest
supported chip (EP7209). Since the DT-support for this CPU is not yet
announced, this change is safe.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-drivers-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

Samsung drivers/soc update for v4.8, part 2:
1. Endian-friendly fixes.
2. Make SROMC driver explicitly non-module.

* tag 'samsung-drivers-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  cpufreq: s5pv210: use relaxed IO accesors
  memory: samsung: exynos-srom: make it explicitly non-modular
  memory: samsung: endian fixes for IO
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-drivers-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Qualcomm ARM Based Driver Updates for v4.8

* Rework of SCM driver
* Add file patterns for Qualcomm Maintainers entry
* Add worker for wcnss_ctrl signaling
* Fixes for smp2p
* Update smem_state properties to match documentation
* Add SCM Peripheral Authentication service
* Expose SCM PAS command 10 as a reset controller

* tag 'qcom-drivers-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  firmware: qcom: scm: Expose PAS command 10 as reset-controller
  firmware: qcom: scm: Peripheral Authentication Service
  soc: qcom: Update properties for smem state referencing
  soc: qcom: smp2p: Drop io-accessors
  soc: qcom: smp2p: Correct addressing of outgoing value
  soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
  firmware: qcom: scm: Add support for ARM64 SoCs
  firmware: qcom: scm: Convert to streaming DMA APIS
  firmware: qcom: scm: Generalize shared error map
  firmware: qcom: scm: Use atomic SCM for cold boot
  firmware: qcom: scm: Convert SCM to platform driver
  MAINTAINERS: Add file patterns for qcom device tree bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

OMAP-GPMC: driver updates for v4.8

* Make GPMC driver non modular as it is going to
be built-in only till arch/arm/mach-omap2 users
are removed.

* Fix build if CONFIG_OF is not defined.

* tag 'gpmc-omap-for-v4.8' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Move gpio functions out of #ifdef CONFIG_OF
  memory: omap-gpmc: make it explicitly non-modular
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'scpi-updates-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers

SCPI updates and fixes for v4.8

1. Adds support for device power state management using generic power
   domains and runtime PM

2. Other minor/miscellaneous fixes to the driver

* tag 'scpi-updates-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: scpi: add device power domain support using genpd
  Documentation: add DT bindings for ARM SCPI power domains
  firmware: arm_scpi: add support for device power state management
  firmware: arm_scpi: make it depend on MAILBOX instead of ARM_MHU
  firmware: arm_scpi: mark scpi_get_sensor_value as static
  firmware: arm_scpi: remove dvfs_get packed structure
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-4.8-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers

Drivers for 4.8 #2:
 - Make memory drivers explicitly non-modular

* tag 'at91-ab-4.8-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  memory: atmel-ebi: make it explicitly non-modular
  memory: atmel-sdramc: make it explicitly non-modular
Signed-off-by: Olof Johansson <olof@lixom.net>

PAS command 10 is used to assert and deassert the MSS reset via
TrustZone, expose this as a reset-controller to mimic the direct
access case.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This adds the Peripheral Authentication Service (PAS) interface to the
Qualcomm SCM interface. The API is used to authenticate and boot a range
of external processors in various Qualcomm platforms.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Update the property names to match device tree bindings, the correct
values should be qcom,smem-states and qcom,smem-state-names.

Also update the #qcom,smem-state-cells for consistency, before we merge
any users of these properties.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

SMEM is now mapped write-combine and we can use memcpy to access the
name of the entires.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

The valid_entries index should not be incremented until after we have
acquired the pointer to the value, or we will read and write data one
item off.

Fixes: 50e99641 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point")
Cc: stable@vger.kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

We need the signal from wcnss_ctrl indicating that the firmware is up
and running before we can communicate with the other components of the
chip. So make these other components children of the wcnss_ctrl device,
so they can be probed in order.

The process seems to take between 1/2-5 seconds, so this is done in a
worker, instead of holding up the probe.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Add an implementation of the SCM interface that works on ARM64 SoCs.  This
is used by things like determine if we have HDCP support or not on the
system.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

This patch converts the Qualcomm SCM driver to use the streaming DMA APIs
for communication buffers.  This is being done so that the
secure_flush_area call can be removed.  Using the DMA APIs will also make
the SCM32 symmetric to the coming SCM64 code.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

This patch moves the qcom_scm_remap_error function to the include file
where can be used by both the 32 and 64 bit versions of the code.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch changes the cold_set_boot_addr function to use atomic SCM
calls.  cold_set_boot_addr required adding qcom_scm_call_atomic2 to
support the two arguments going to the smc call.  Using atomic removes
the need for memory allocation and instead places all arguments in
registers.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This patch converts the Qualcomm SCM firmware driver into a platform
driver.  It also adds clock management for firmware calls which require
clocks to be enabled during the duration of their execution.  Rate
setting of the core clock is also in place for higher performance.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Signed-off-by: Andy Gross <andy.gross@linaro.org>

The use of __raw IO accesors is not endian safe and should be used
sparingly. The relaxed variants should be as lightweight and also
are endian safe.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

The Kconfig currently controlling compilation of this code is:

drivers/memory/Kconfig:config ATMEL_EBI
drivers/memory/Kconfig: bool "Atmel EBI driver"

...meaning that it currently is not being built as a module by anyone.

Lets remove the few remaining modular references, so that when reading
the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

The Kconfig for this option is currently:

config ATMEL_SDRAMC
        bool "Atmel (Multi-port DDR-)SDRAM Controller"

...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity, so that when reading the
driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.  An
alternate init level might be worth considering at a later date.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This patch hooks up the support for device power domain provided by
SCPI using the Linux generic power domain infrastructure.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The System Control Processor (SCP) provides peripheral devices with
power domains that can be enabled and disabled viathe System Control
and Power Interface (SCPI) Message Protocol. Add bindings to allow
probing of these device power domians.

Cc: Rob Herring <robh+dt@kernel.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

SCPI protocol supports device power state management. This deals with
power states of various peripheral devices in the system other than the
core compute subsystem.

This patch adds support for the power state management of those
peripheral devices.
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The Kconfig currently controlling compilation of this code is:

memory/samsung/Kconfig:config EXYNOS_SROM
memory/samsung/Kconfig: bool "Exynos SROM controller driver" if COMPILE_TEST

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Use the relaxed versions of the IO accessors to avoid any issues
if running in big endian.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

This pull request contains drivers related changes for Broadcom SoCs:

- Florian moves drivers/soc/brcmstb to drivers/soc/bcm/brcmstb to be consistent with
  how other SoCs are doing it

- Chris provides a reset driver which is common to the BCM21664 and BCM23550 SoCs

- Ben fixes a warning by providing the appropriate include file

* tag 'arm-soc/for-4.8/drivers' of http://github.com/Broadcom/stblinux:
  soc: brcmstb: fix warning from missing include
  power: Introduce Broadcom kona reset driver
  soc: Move brcmstb to bcm/brcmstb
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-drivers-exynos-mfc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

Topic branch for Exynos MFC changes for v4.8:
Pull s5p-mfc changes from media tree so the arm/mach-exynos code
could be removed. The bindings are converted to generic reserved memory
bindings.

* tag 'samsung-drivers-exynos-mfc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Enable MFC device on Exynos4412 Odroid boards
  ARM: dts: exynos: Convert MFC device to generic reserved memory bindings
  ARM: EXYNOS: Remove code for MFC custom reserved memory handling
  media: s5p-mfc: add iommu support
  media: s5p-mfc: replace custom reserved memory handling code with generic one
  media: s5p-mfc: use generic reserved memory bindings
  of: reserved_mem: add support for using more than one region for given device
  media: set proper max seg size for devices on Exynos SoCs
  media: vb2-dma-contig: add helper for setting dma max seg size
  s5p-mfc: Fix race between s5p_mfc_probe() and s5p_mfc_open()
  s5p-mfc: Add release callback for memory region devs
  s5p-mfc: Set device name for reserved memory region devs
Signed-off-by: Olof Johansson <olof@lixom.net>

The gpio related functions were mistakenly built only if CONFIG_OF
is defined. They are needed even otherwise and will cause build
failures if CONFIG_OF is not defined. Move the gpio functions
outside #ifdef CONFIG_OF.

Fixes: d2d00862 ("memory: omap-gpmc: Support general purpose input for WAITPINs")
Signed-off-by: Roger Quadros <rogerq@ti.com>

The Kconfig currently controlling compilation of this code is:

drivers/memory/Kconfig:config OMAP_GPMC
drivers/memory/Kconfig:  bool

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We don't replace module.h with init.h since the file already has that.

Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Reset controller changes for v4.8, part 2

- add Amlogic Meson SoC Reset Controller driver

* tag 'reset-for-4.8-2' of git://git.pengutronix.de/git/pza/linux:
  dt-bindings: reset: Add bindings for the Meson SoC Reset Controller
  reset: Add support for the Amlogic Meson SoC Reset Controller
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-4.8-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers

Drivers for 4.8:
 - Add a driver for the EBI

* tag 'at91-ab-4.8-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  memory: atmel-ebi: add DT bindings documentation
  memory: add Atmel EBI (External Bus Interface) driver
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-rcar-sysc-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Renesas ARM Based SoC R-Car SYSC Updates for v4.8

e0c98b91 soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas
74699228 soc: renesas: Add r8a7796 SYSC PM Domain Binding Definitions
2ff1bf77 soc: renesas: rcar-sysc: Document r8a7796 support

* tag 'renesas-rcar-sysc-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas
  soc: renesas: Add r8a7796 SYSC PM Domain Binding Definitions
  soc: renesas: rcar-sysc: Document r8a7796 support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-drivers-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

Samsung drivers/soc update for v4.8:
1. Move the power domain driver from arm/mach-exynos and prepare
   for supporting ARMv8.
2. Add COMPILE_TEST.

* tag 'samsung-drivers-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  soc: samsung: pm_domains: Enable COMPILE_TEST for build coverage
  soc: samsung: pm_domains: Prepare for supporting ARMv8 Exynos
  ARM: EXYNOS: Move pm_domains driver to drivers/soc/samsung
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM_SCPI_PROTOCOL can be used with any mailbox and not just ARM MHU
mailbox controller. This patch drops it's dependency on ARM_MHU and
make it depend on just mailbox framework.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>