- 16 Jun, 2009 40 commits
-
-
Uri Shkolnik authored
This patch add support for IR (infra-red) remote controllers. Further commits are needed in order to enable the activation of the IR components. Signed-off-by:
Uri Shkolnik <uris@siano-ms.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Uri Shkolnik authored
Some more indentation for the smscoreapi.h There are no implementation changes in this patch. Signed-off-by:
-
Uri Shkolnik authored
smscoreapi - move the main core structure declaration to the header, in order to enable other components (such as IR) to use it. Signed-off-by:
-
Uri Shkolnik authored
Add new definitions (of Siano's protocol messages), and protocol structures (for future commits usage) Signed-off-by:
-
Uri Shkolnik authored
Remove two redundant lines, based on Klimov Alexey code review. Signed-off-by:
-
Miroslav Sustek authored
cx88-dsp: fixing 64bit math on 32bit kernels Some gcc versions report the missing of __divdi3 [mchehab.redhat.com: CodingStyle fixes] Signed-off-by:
Miroslav Sustek <sustmidown@centrum.cz> Signed-off-by:
-
Marton Balint authored
This patch changes cx88_set_stereo to avoid resetting all of the audio registers on stereo/mono change if the audio standard is A2, and set only the AUD_CTL register. The benefit of this method is that it eliminates the annoying clicking noise on setting the audio mode to stereo or mono. The driver had used the same method 1.5 years ago (and for FM radio it still does), but a pretty big cleanup commit changed it to the "complete audio reset" method, although the reason for this move was not clear. (If somebody knows why it was necessary, please let me know!) The original commit: http://linuxtv.org/hg/v4l-dvb/rev/ffe313541d7dSigned-off-by:
Marton Balint <cus@fazekas.hu> Signed-off-by:
-
Marton Balint authored
The sole purpose of the audio thread is to detect if stereo transmission is available, and if it is, then switch to stereo mode (and switch back, if it's no longer available). This manual autodetection is useful for some audio standards (e.g. A2) where cx88_get_stereo CAN detect stereo sound, but the cx2388x chip CANNOT auto-detect stereo sound. However, for other audio standards, the cx2388x chip CAN auto-detect the stereo sound, so the manual autodetection in the audio thread is not needed. In fact, it can cause serious problems because for some of these audio standards, cx88_get_stereo CANNOT detect the presence of stereo sound. Besides that, if the hardware automatically detects stereo/mono sound, you cannot set core->audiomode_current to the real current audio mode on channel change. With this patch, the manual autodetection is only used if audiomode_current is known after a channel change (because of the initial mono mode), and hardware-based stereo autodetecion is not applicable for the current audio standard. Signed-off-by:
-
Marton Balint authored
The patch implements reliable stereo and sap detection for the A2 sound standard. This is achieved by processing the samples of the audio RDS fifo of the cx2388x chip. A2M, EIAJ and BTSC stereo/sap detection is also possible with this new approach, but it's not implemented yet. Stereo detection when alsa handles the sound also does not work yet. Signed-off-by:
-
Uri Shkolnik authored
This patch provides SDIO interface driver for SMS (Siano Mobile Silicon) based devices. The patch includes SMS high level SDIO driver and requires patching the kernel SDIO stack, those stack patches had been provided previously. I would like to thank Pierre Ossman, MMC maintainer, who wrote this driver. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Signed-off-by:
-
Uri Shkolnik authored
sdio: add cards id for sms (Siano Mobile Silicon) MDTV receivers Add SDIO vendor ID, and multiple device IDs for various SMS-based MDTV SDIO adapters. Signed-off-by:
-
Michael Krufky authored
Signed-off-by: Michael Krufky <kernellabs.com> Signed-off-by: -
Devin Heitmueller authored
The fact that we now explicitly set fepriv->exit = 1 when the thread is shutting down exposed an edge case where it was not being reset back to zero once the thread went away in some cases. This resulted in failures in cases where the frontend was closed, and then opened O_RDONLY, since in that case the thread is not being restarted but it was checking the fepriv->exit flag. Thanks to Thierry Lelegard, who and encountered and debugged a large portion of the issue in the same twelve hours that I did (as well as testing my patch). Cc: Thierry Lelegard <thierry.lelegard@tv-numeric.com> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Uri Shkolnik authored
Add support for big endien target hosts, which use USB interface. Signed-off-by:
-
Devin Heitmueller authored
A race condition was detected in the case that putting the tuner to sleep takes an unusually long period of time, combined with applications that quickly close/open the dvb frontend. The kaffeine channel scanner closes and reopens the dvb frontend between each tuning attempt. If it takes an unusually longer period of time to put the tuner to sleep (for example, the Pinnacle 801e takes 660 ms), the dvb_frontend thread will still be in a running state (and hence fepriv->thread is still set) but the fepriv->exit field will still be zero. As a result, if a dvb_frontend_start() call arrives while the frontend thread is in the process of terminating, the call will return 0 without actually starting a new thread. This results in the tuning request being dropped. To address this, mark fepriv->exit as soon as we know the thread is going to be terminated, so that dvb_frontend_start() knows to start a new instance. Problem encountered with Kaffeine 0.8.7 doing ATSC scanning against the Pinnacle 801e tuner, in conjunction with new code to power down the xc5000 when not in use. Signed-off-by:
-
Devin Heitmueller authored
A power management fix to properly put the xc5000 into low power mode revealed a race condition where hald could detect the creation of the device file and connect to the device while the initial device configuration is still in progress. Lock the core structure so that video_release cannot be called and put the tuner to sleep in the middle of the initial call to cx88_set_tvnorm() in cx8800_initdev() Thanks to Michael Krufky for discovering the issue and providing an environment to test in. Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Dean Anderson authored
Error count in read pipe completion corrected. URB not resubmitted if shutting down. URB not freed in completion routine if new urb_submit_fails. (URB is freed on shutdown). Signed-off-by:
Dean Anderson <dean@sensoray.com> Signed-off-by:
-
Robert Krakora authored
V4L/DVB (12002): uvc: Fix for no return value check of uvc_ctrl_set() which calls mutex_lock_interruptible() Fix for no return value check of uvc_ctrl_set() which calls mutex_lock_interruptible(). Signed-off-by:
Robert Krakora <rob.krakora@messagenetsystems.com> Acked-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
David Wong authored
lgs8gxx: update signal strength scale Signed-off-by:
David T.L. Wong <davidtlwong@gmail.com> Signed-off-by:
-
David Wong authored
lgs8gxx: lgs8913 fake signal strength option default on. Original calculation is too slow. Signed-off-by: David T.L. Wong <davidtlwong <at> gmail.com> Signed-off-by: -
Jan Nikitenko authored
This patch fixes stack corruption bug present in af9015_eeprom_dump(): the buffer buf is one byte smaller than required - there is 4 chars for address prefix, 16*3 chars for dump of 16 eeprom bytes per line and 1 byte for zero ending the string required, i.e. 53 bytes, but only 52 are provided. The one byte missing in stack based buffer buf causes following oops on MIPS little endian platform, because i2c_adap pointer in af9015_af9013_frontend_attach() is corrupted by inlined function af9015_eeprom_dump(): CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 803a4488, ra == c049a1c8 Oops[#1]: Cpu 0 $ 0 : 00000000 10003c00 00000000 803a4468 $ 4 : 8f17c600 8f067b30 00000002 00000038 $ 8 : 00000001 8faf3e98 11da000d 09010002 $12 : 00000000 00000000 00000000 0000000a $16 : 8f17c600 8f067b68 8faf3c00 8f067c04 $20 : 8f067b9c 00000100 8f067bf0 80104100 $24 : 00000000 2aba9fb0 $28 : 8f066000 8f067af0 802cbc48 c049a1c8 Hi : 00000000 Lo : 00000000 epc : 803a4488 i2c_transfer+0x20/0x104 Not tainted ra : c049a1c8 af9013_read_reg+0x78/0xc4 [af9013] Status: 10003c03 KERNEL EXL IE Cause : 00808008 BadVA : 00000000 PrId : 03030200 (Au1550) Modules linked in: af9013 dvb_usb_af9015(+) dvb_usb dvb_core firmware_class i2c_au1550 au1550_spi Process modprobe (pid: 2757, threadinfo=8f066000, task=8fade098, tls=2aad6470) Stack : c049f5e0 80163090 805ba880 00000100 8f067bf0 0000d733 8f067b68 8faf3c00 8f067c04 c049a1c8 80163bc0 8056a630 8f067b40 80163224 80569fc8 8f0033d7 00000038 80140003 8f067b2c 00010038 c0420001 8f067b28 c049f5e0 00000004 00000004 c049a524 c049d5a8 c049d5a8 00000000 803a6700 00000000 8f17c600 c042a7a4 8f17c600 c042a7a4 c049c924 00000000 00000000 00000002 613a6c00 ... Call Trace: [<803a4488>] i2c_transfer+0x20/0x104 [<c049a1c8>] af9013_read_reg+0x78/0xc4 [af9013] [<c049a524>] af9013_read_reg_bits+0x2c/0x70 [af9013] [<c049c924>] af9013_attach+0x98/0x65c [af9013] [<c04257bc>] af9015_af9013_frontend_attach+0x214/0x67c [dvb_usb_af9015] [<c03e2428>] dvb_usb_adapter_frontend_init+0x20/0x12c [dvb_usb] [<c03e1ad8>] dvb_usb_device_init+0x374/0x6b0 [dvb_usb] [<c0426120>] af9015_usb_probe+0x4fc/0xfcc [dvb_usb_af9015] [<80381024>] usb_probe_interface+0xbc/0x218 [<803227fc>] driver_probe_device+0x12c/0x30c [<80322a80>] __driver_attach+0xa4/0xac [<80321ed0>] bus_for_each_dev+0x60/0xd0 [<8032162c>] bus_add_driver+0x1e8/0x2a8 [<80322cdc>] driver_register+0x7c/0x17c [<80380d30>] usb_register_driver+0xa0/0x12c [<c042e030>] af9015_usb_module_init+0x30/0x6c [dvb_usb_af9015] [<8010d2a4>] __kprobes_text_end+0x3c/0x1f4 [<80167150>] sys_init_module+0xb8/0x1cc [<80102370>] stack_done+0x20/0x3c Code: afb10018 7000003f 00808021 <8c430000> 7000003f 1060002d 00c09021 8f830014 3c02efff Signed-off-by:Jan Nikitenko <jan.nikitenko@gmail.com> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Alan Cox authored
Having fixed the sprintfs I decided a quick clean wouldn't do any harm so it was actually easy to read in future. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alexey Klimov authored
Patch removes needless if check and goto. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Reviewed-by:
Erik Andrén <erik.andren@gmail.com> Signed-off-by:
-
Barry Kitson authored
Add 1461:f736 to the list of identifiers corresponding to the SAA7134_BOARD_AVERMEDIA_M103 board. This patch adds support for a variant of the AVerMedia M103 MiniPCI DVB-T Hybrid card. Signed-off-by:
Barry Kitson <b.kitson@gmail.com> Signed-off-by:
-
Figo.zhang authored
vfree() does it's own NULL checking, no need for explicit check before calling it. Signed-off-by:
Figo.zhang <figo1802@gmail.com> Signed-off-by:
-
Lennart Poettering authored
The current code creates a sysfs device path where the video4linux device is child of the usb device itself instead of the interface it belongs to. That is evil and confuses udev. This patch does basically the same thing as Kay's similar patch for the ov511 driver: at git commit ce96d0a4Signed-off-by:
Lennart Poettering <mzxreary@0pointer.de> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jean Delvare authored
Add missing __devexit_p() to several drivers. Also add a few missing __init, __devinit and __exit markers. These errors could result in build failures depending on the kernel configuration. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Figo.zhang authored
add poiter check for videobuf_queue_core_init(). any guys who write a v4l driver, pass a NULL pointer or a non-inintial pointer to the first parameter such as videobuf_queue_sg_init() , it would be crashed. Signed-off-by:
-
figo.zhang authored
when re-open or re-start (video_streamon), the q->curr would not be NULL in saa7134_buffer_queue(), and all the qbuf will add to q->queue list,no one to do activate to start DMA,and then no interrupt would happened,so it will be block. In VIDEOBUF_NEEDS_INIT state, initialize the curr pointer to be NULL in the buffer_prepare(). Signed-off-by:
Figo.zhang <figo.zhang@kolorific.com> Signed-off-by:
-
Frank Dischner authored
Add support for QAM64 modulation type to the au8522 demod driver. Signed-off-by:
Frank Dischner <phaedrus961@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Auto-selects tda1002x if !DVB_FE_CUSTOMISE Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by: -
Igor M. Liplianin authored
Add support for SDMC DM1105 based DVB-S cards with PCI ID 195d:1105 Also create separate workqueue for demuxing. Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Signed-off-by:
-
Igor M. Liplianin authored
DVBWorld DVB-C USB Cable card contains TUA6034 tuner, TDA10023 demod and Cypress FX-2 controller. http://www.worlddvb.com/product/htm/usbc.htmSigned-off-by:
-
Igor M. Liplianin authored
Add keymaps for TeVii and TBS USB DVB-S/S2 cards Also module parameter named keymap inserted for override default keymap. Signed-off-by:
-
Igor M. Liplianin authored
Remote control debugging for dw2102 driver based USB cards It includes DVBWorld, TeVii, Terratec and others. Type 'modprobe dvb-usb-dw2102 debug=4', then look at dmesg output. Signed-off-by:
-
Devin Heitmueller authored
In cases where the device does not actually provide a USB audio class *or* vendor audio, do not load the driver that provides vendor audio support (such as the KWorld 2800d). Otherwise, the /dev/audio1 device file gets created and users get confused. Also, reworks the logic a bit so that we don't try to inspect the register content if the register read failed entirely. Signed-off-by:
-
Franklin Meng authored
Added an entry for Kworld 315 (for while, dvb only) Signed-off-by:
Franklin Meng <fmeng2002@yahoo.com> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
Franklin Meng authored
Added tda9887_conf set up into em28xx_card_setup() Signed-off-by:
-
Jean-Francois Moine authored
The scan of the image packets of the sensor ov772x was broken when the sensor ov965x was added. Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
