Record state transitions as each connection is established. The IP address
of both peers and the Type of Service is reported. These trace points are
not in performance hot paths.

Also, record each cm_event_handler call to ULPs. This eliminates the need
for each ULP to add its own similar trace point in its CM event handler
function.

These new trace points appear in a new trace subsystem called "rdma_cma".

Sample events:

           <...>-220   [004]   121.430733: cm_id_create:         cm.id=0
           <...>-472   [003]   121.430991: cm_event_handler:     cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 ADDR_RESOLVED (0/0)
           <...>-472   [003]   121.430995: cm_event_done:        cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
           <...>-472   [003]   121.431172: cm_event_handler:     cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 ROUTE_RESOLVED (2/0)
           <...>-472   [003]   121.431174: cm_event_done:        cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
           <...>-220   [004]   121.433480: cm_qp_create:         cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 pd.id=2 qp_type=RC send_wr=4091 recv_wr=256 qp_num=521 rc=0
           <...>-220   [004]   121.433577: cm_send_req:          cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 qp_num=521
     kworker/1:2-973   [001]   121.436190: cm_send_mra:          cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
     kworker/1:2-973   [001]   121.436340: cm_send_rtu:          cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
     kworker/1:2-973   [001]   121.436359: cm_event_handler:     cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 ESTABLISHED (9/0)
     kworker/1:2-973   [001]   121.436365: cm_event_done:        cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
           <...>-1975  [005]   123.161954: cm_disconnect:        cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
           <...>-1975  [005]   123.161974: cm_sent_dreq:         cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
           <...>-220   [004]   123.162102: cm_disconnect:        cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0
     kworker/0:1-13    [000]   123.162391: cm_event_handler:     cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 DISCONNECTED (10/0)
     kworker/0:1-13    [000]   123.162393: cm_event_done:        cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 result=0
           <...>-220   [004]   123.164456: cm_qp_destroy:        cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0 qp_num=521
           <...>-220   [004]   123.165290: cm_id_destroy:        cm.id=0 src=192.168.2.51:35090 dst=192.168.2.55:20049 tos=0

Some features to note:
- restracker ID of the rdma_cm_id is tagged on each trace event
- The source and destination IP addresses and TOS are reported
- CM event upcalls are shown with decoded event and status
- CM state transitions are reported
- rdma_cm_id lifetime events are captured
- The latency of ULP CM event handlers is reported
- Lifetime events of associated QPs are reported
- Device removal and insertion is reported

This patch is based on previous work by:

Saeed Mahameed <saeedm@mellanox.com>
Mukesh Kacker <mukesh.kacker@oracle.com>
Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com>
Aron Silverton <aron.silverton@oracle.com>
Avinash Repaka <avinash.repaka@oracle.com>
Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>

Link: https://lore.kernel.org/r/20191218201810.30584.3052.stgit@manet.1015granger.netSigned-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Clean the code by deleting ARP functions, which are not called anyway.

Link: https://lore.kernel.org/r/20191212093830.316934-46-leon@kernel.orgSigned-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Clean the code by deleting LAP functions, which are not called anyway.

Link: https://lore.kernel.org/r/20191212093830.316934-43-leon@kernel.orgSigned-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

A NULL pointer can be returned by in_dev_get(). Thus add a corresponding
check so that a NULL pointer dereference will be avoided at this place.

Fixes: 8e06af71 ("i40iw: add main, hdr, status")
Link: https://lore.kernel.org/r/1577672668-46499-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The type of mmap_offset should be u64 instead of int to match the type of
mminfo.offset. If otherwise, after we create several thousands of CQs, it
will run into overflow issues.

Link: https://lore.kernel.org/r/20191227113613.5020-1-kejiewei.cn@gmail.comSigned-off-by: Jiewei Ke <kejiewei.cn@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes coccicheck warning:

drivers/infiniband/hw/mlx5/mr.c:150:2-26: WARNING: Assignment of 0/1 to bool variable
drivers/infiniband/hw/mlx5/mr.c:1455:2-26: WARNING: Assignment of 0/1 to bool variable
drivers/infiniband/hw/mlx5/qp.c:1874:6-20: WARNING: Assignment of 0/1 to bool variable

Link: https://lore.kernel.org/r/1577176812-2238-6-git-send-email-zhengbin13@huawei.comReported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes coccicheck warning:

drivers/infiniband/hw/mlx4/qp.c:852:2-14: WARNING: Assignment of 0/1 to bool variable
drivers/infiniband/hw/mlx4/qp.c:3087:3-10: WARNING: Assignment of 0/1 to bool variable

Link: https://lore.kernel.org/r/1577176812-2238-5-git-send-email-zhengbin13@huawei.comReported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes coccicheck warning:

drivers/infiniband/ulp/iser/iser_memory.c:530:2-21: WARNING: Assignment of 0/1 to bool variable
drivers/infiniband/ulp/iser/iser_verbs.c:1096:2-21: WARNING: Assignment of 0/1 to bool variable

Link: https://lore.kernel.org/r/1577176812-2238-4-git-send-email-zhengbin13@huawei.comReported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes coccicheck warning:

drivers/infiniband/hw/hfi1/rc.c:2602:1-8: WARNING: Assignment of 0/1 to bool variable

Link: https://lore.kernel.org/r/1577176812-2238-3-git-send-email-zhengbin13@huawei.comReported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes coccicheck warning:

drivers/infiniband/sw/siw/siw_cm.c:32:18-41: WARNING: Assignment of 0/1 to bool variable

Link: https://lore.kernel.org/r/1577176812-2238-2-git-send-email-zhengbin13@huawei.comReported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

As VMAs for a given range might not be available as part of the
registration phase in ODP.

ib_init_umem_odp() considered the expected page shift value that was
previously set and initializes its internals accordingly.

If memory isn't backed by physical contiguous pages aligned to a hugepage
boundary an error will be set as part of the page fault flow and come back
to the user as some failed RDMA operation.

Fixes: 0008b84e ("IB/umem: Add support to huge ODP")
Link: https://lore.kernel.org/r/20191222124649.52300-4-leon@kernel.orgSigned-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The nr_pages argument of get_user_pages_remote() should always be in terms
of the system page size, not the MR page size. Use PAGE_SIZE instead of
umem_odp->page_shift.

Fixes: 403cd12e ("IB/umem: Add contiguous ODP support")
Link: https://lore.kernel.org/r/20191222124649.52300-3-leon@kernel.orgSigned-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Building MR translation table in the ODP case requires additional
flexibility, namely random access to DMA addresses. Make both direct and
indirect ODP MR use same code path, separated from the non-ODP MR code
path.

With the restructuring the correct page_shift is now used around
__mlx5_ib_populate_pas().

Fixes: d2183c6f ("RDMA/umem: Move page_shift from ib_umem to ib_odp_umem")
Link: https://lore.kernel.org/r/20191222124649.52300-2-leon@kernel.orgSigned-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Comments need to be with the definition of rvt_restart_sge().

Other comments were duplicated in sw/rdmavt/rc.c and were removed.

Fixes: 385156c5 ("IB/hfi: Move RC functions into a header file")
Link: https://lore.kernel.org/r/20191219211934.58387.88014.stgit@awfm-01.aw.intel.comReviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The current debugfs output for receive contexts (rcds), stops after the
kernel receive contexts have been displayed.  This is not enough
information to fully diagnose packet drops.

Display all of the receive contexts.

Augment the output with some more context information.

Limit the ring buffer header output to 5 entries to avoid overextending
the sequential file output.

Fixes: bf808b50 ("IB/hfi1: Add kernel receive context info to debugfs")
Link: https://lore.kernel.org/r/20191219211928.58387.20737.stgit@awfm-01.aw.intel.comReviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch adds a set of accessor routines to access context members.

Link: https://lore.kernel.org/r/20191219211922.58387.26548.stgit@awfm-01.aw.intel.comReviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Ingress checksum offload was not working for IPv6 frames because the
conditional expression that checks validation status passed from the
hardware was not matching the algorithm described in the documentation.

This patch defines L4_CSUM flag (which falls inside the badfcs_enc field
in the existing definition of the CQE layout) and replaces the conditional
expression with the one defined in the "ConnectX(r) Family Programmer's
Manual" document.

Link: https://lore.kernel.org/r/20191219134847.413582-1-leon@kernel.orgSigned-off-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The RCU mechanism is optimized for read-mostly scenarios and therefore
more suitable to protect the cm_id_private to decrease "cm.lock"
congestion.

This patch replaces the existing spinlock locking mechanism and kfree with
RCU mechanism in places where spinlock(cm.lock) protected xa_load
returning the cm_id_priv

In addition, delete the cm_get_id() function as there is no longer a
distinction if the caller already holds the cm_lock.

Remove an open coded version of cm_get_id().

Link: https://lore.kernel.org/r/20191219134750.413429-1-leon@kernel.orgSigned-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Since ch has already been de-referenced by the time we get to the BUG_ON,
it is useless. The back trace alone is enough to tell what is going on,
delete the redundant BUG_ON.

Link: https://lore.kernel.org/r/20191217194437.25568-1-pakki001@umn.eduSigned-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

In rdma_nl_rcv_skb(), the local variable err is assigned the return value
of the supplied callback function, which could be one of
ib_nl_handle_resolve_resp(), ib_nl_handle_set_timeout(), or
ib_nl_handle_ip_res_resp(). These three functions all return skb->len on
success.

rdma_nl_rcv_skb() is merely a copy of netlink_rcv_skb(). The callback
functions used by the latter have the convention: "Returns 0 on success or
a negative error code".

In particular, the statement (equal for both functions):

   if (nlh->nlmsg_flags & NLM_F_ACK || err)

implies that rdma_nl_rcv_skb() always will ack a message, independent of
the NLM_F_ACK being set in nlmsg_flags or not.

The fix could be to change the above statement, but it is better to keep
the two *_rcv_skb() functions equal in this respect and instead change the
three callback functions in the rdma subsystem to the correct convention.

Fixes: 2ca546b9 ("IB/sa: Route SA pathrecord query through netlink")
Fixes: ae43f828 ("IB/core: Add IP to GID netlink offload")
Link: https://lore.kernel.org/r/20191216120436.3204814-1-haakon.bugge@oracle.comSuggested-by: Mark Haywood <mark.haywood@oracle.com>
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Tested-by: Mark Haywood <mark.haywood@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Commit b0ffeb53 ("IB/mlx5: Fix iteration overrun in GSI qps") changed
the way outstanding WRs are tracked for the GSI QP. But the fix did not
cover the case when a call to ib_post_send() fails and updates index to
track outstanding.

Since the prior commmit outstanding_pi should not be bounded otherwise the
loop generate_completions() will fail.

Fixes: b0ffeb53 ("IB/mlx5: Fix iteration overrun in GSI qps")
Link: https://lore.kernel.org/r/1576195889-23527-1-git-send-email-psajeepa@purestorage.comSigned-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Change siw_qp to contain ib_qp. Use rdma_is_kernel_res() on contained
ib_qp to distinguish kernel level from user level applications
resources. Apply same mechanism for kernel/user level application
detection to completion queues.

Link: https://lore.kernel.org/r/20191210161729.31598-1-bmt@zurich.ibm.comSigned-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Currently, the wqe idx is calculated repeatly everywhere it is used.  This
patch defines wqe_idx and calculated it only once, then just use it as
needed.

Fixes: 2d407888 ("RDMA/hns: Add support for processing send wr and receive wr")
Link: https://lore.kernel.org/r/1575981902-5274-1-git-send-email-liweihang@hisilicon.comSigned-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Report the the data path MSIx vectors allocated by driver as number of
completion vectors. One interrupt vector is used for Control path. So
reporting one less than the total number of MSIx vectors allocated by the
driver.

Link: https://lore.kernel.org/r/1574671174-5064-7-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

HW/FW support two types of latency enhancement features.  Until now
user-space implemented only edpm (enhanced dpm).  We add kernel capability
flags to differentiate between current FW in kernel that supports both
ldpm and edpm.  Since edpm is not yet supported for iWARP we add different
flags for iWARP + RoCE.  We also fix bad practice of defining sizes in
rdma-core and pass initialization to kernel, for forward compatibility.

The capability flags are added for backward-forward compatibility between
kernel and rdma-core for qedr.

Before this change there was a field called dpm_enabled which could hold
either 0 or 1 value, this indicated whether RoCE edpm was enabled or
not. We modified this field to be dpm_flags, and bit 1 still holds the
same meaning of RoCE edpm being enabled or not.

Link: https://lore.kernel.org/r/20191121112957.25162-1-michal.kalderon@marvell.comSigned-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Pull RISC-V fixes from Paul Walmsley:
 "One important fix for RISC-V:

   - Redirect any incoming syscall with an ID less than -1 to
     sys_ni_syscall, rather than allowing them to fall through into the
     syscall handler.

  and two minor build fixes:

   - Export __asm_copy_{from,to}_user() from where they are defined.
     This fixes a build error triggered by some randconfigs.

   - Export flush_icache_all(). I'd resisted this before, since
     historically we didn't want modules to be able to flush the I$
     directly; but apparently everyone else is doing it now"

* tag 'riscv/for-v5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: export flush_icache_all to modules
  riscv: reject invalid syscalls below -1
  riscv: fix compile failure with EXPORT_SYMBOL() & !MMU

Pull /proc/locks formatting fix from Jeff Layton:
 "This is a trivial fix for a _very_ long standing bug in /proc/locks
  formatting. Ordinarily, I'd wait for the merge window for something
  like this, but it is making it difficult to validate some overlayfs
  fixes.

  I've also gone ahead and marked this for stable"

* tag 'locks-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: print unsigned ino in /proc/locks

Pull cifs fixes from Steve French:
 "One performance fix for large directory searches, and one minor style
  cleanup noticed by Clang"

* tag '5.5-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Optimize readdir on reparse points
  cifs: Adjust indentation in smb2_open_file

An ino is unsigned, so display it as such in /proc/locks.

Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>

This is needed by LKDTM (crash dump test module), it calls
flush_icache_range(), which on RISC-V turns into flush_icache_all(). On
other architectures, the actual implementation is exported, so follow
that precedence and export it here too.

Fixes build of CONFIG_LKDTM that fails with:
ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined!
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops
with "Unable to handle kernel paging request at virtual address" message. This
happens when enosys stressor starts testing random non-valid syscalls.

I forgot to redirect any syscall below -1 to sys_ni_syscall.

With the patch kernel oops messages are gone while running stress-ng enosys
stressor.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 5340627e ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

When support for !MMU was added, the declaration of
__asm_copy_to_user() & __asm_copy_from_user() were #ifdefed
out hence their EXPORT_SYMBOL() give an error message like:
  .../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here
  .../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here

Since these symbols are not defined with !MMU it's wrong to export them.
Same for __clear_user() (even though this one is also declared in
include/asm-generic/uaccess.h and thus doesn't give an error message).

Fix this by doing the EXPORT_SYMBOL() directly where these symbols
are defined: inside lib/uaccess.S itself.

Fixes: 6bd33e1e ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Pull SCSI fixes from James Bottomley:
 "Four fixes and one spelling update, all in drivers: two in lpfc and
  the rest in mp3sas, cxgbi and target"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target/iblock: Fix protection error with blocks greater than 512B
  scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()
  scsi: lpfc: fix spelling mistakes of asynchronous
  scsi: lpfc: fix build failure with DEBUGFS disabled
  scsi: mpt3sas: Fix double free in attach error handling

Pull drm fixes from Dave Airlie:
 "Post-xmas food coma recovery fixes. Only three fixes for i915 since I
  expect most people are holidaying.

  i915:
   - power management rc6 fix
   - framebuffer tracking fix
   - display power management ratelimit fix"

* tag 'drm-fixes-2019-12-28' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: Hold reference to intel_frontbuffer as we track activity
  drm/i915/gt: Ratelimit display power w/a
  drm/i915/pmu: Ensure monotonic rc6

Merge tag 'linux-kselftest-5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:

 - rseq build failures fixes related to glibc 2.30 compatibility from
   Mathieu Desnoyers

 - Kunit fixes and cleanups from SeongJae Park

 - Fixes to filesystems/epoll, firmware, and livepatch build failures
   and skip handling.

* tag 'linux-kselftest-5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  rseq/selftests: Clarify rseq_prepare_unload() helper requirements
  rseq/selftests: Fix: Namespace gettid() for compatibility with glibc 2.30
  rseq/selftests: Turn off timeout setting
  kunit/kunit_tool_test: Test '--build_dir' option run
  kunit: Rename 'kunitconfig' to '.kunitconfig'
  kunit: Place 'test.log' under the 'build_dir'
  kunit: Create default config in '--build_dir'
  kunit: Remove duplicated defconfig creation
  docs/kunit/start: Use in-tree 'kunit_defconfig'
  selftests: livepatch: Fix it to do root uid check and skip
  selftests: firmware: Fix it to do root uid check and skip
  selftests: filesystems/epoll: fix build error

Pull power management fixes from Rafael Wysocki:
 "Fix compile test of the Tegra devfreq driver (Arnd Bergmann) and
  remove redundant Kconfig dependencies from multiple devfreq drivers
  (Leonard Crestez)"

* tag 'pm-5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / devfreq: tegra: Add COMMON_CLK dependency
  PM / devfreq: Drop explicit selection of PM_OPP

Pull io_uring fixes from Jens Axboe:

 - Removal of now unused busy wqe list (Hillf)

 - Add cond_resched() to io-wq work processing (Hillf)

 - And then the series that I hinted at from last week, which removes
   the sqe from the io_kiocb and keeps all sqe handling on the prep
   side. This guarantees that an opcode can't do the wrong thing and
   read the sqe more than once. This is unchanged from last week, no
   issues have been observed with this in testing. Hence I really think
   we should fold this into 5.5.

* tag 'io_uring-5.5-20191226' of git://git.kernel.dk/linux-block:
  io-wq: add cond_resched() to worker thread
  io-wq: remove unused busy list from io_sqe
  io_uring: pass in 'sqe' to the prep handlers
  io_uring: standardize the prep methods
  io_uring: read 'count' for IORING_OP_TIMEOUT in prep handler
  io_uring: move all prep state for IORING_OP_{SEND,RECV}_MGS to prep handler
  io_uring: move all prep state for IORING_OP_CONNECT to prep handler
  io_uring: add and use struct io_rw for read/writes
  io_uring: use u64_to_user_ptr() consistently

Pull libata fixes from Jens Axboe:
 "Two things in here:

   - First half of a series that fixes ahci_brcm, also marked for
     stable. The other part of the series is going into 5.6 (Florian)

   - sata_nv regression fix that is also marked for stable (Sascha)"

* tag 'libata-5.5-20191226' of git://git.kernel.dk/linux-block:
  ata: ahci_brcm: Add missing clock management during recovery
  ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE
  ata: ahci_brcm: Fix AHCI resources management
  ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
  libata: Fix retrieving of active qcs

Pull block fixes from Jens Axboe:
 "Only thing here are the changes from Arnd from last week, which now
  have the appropriate header include to ensure they actually compile if
  COMPAT is enabled"

* tag 'block-5.5-20191226' of git://git.kernel.dk/linux-block:
  compat_ioctl: block: handle Persistent Reservations
  compat_ioctl: block: handle add zone open, close and finish ioctl
  compat_ioctl: block: handle BLKGETZONESZ/BLKGETNRZONES
  compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE
  pktcdvd: fix regression on 64-bit architectures