flow_stats_update() uses max_t, so ensure we have that defined.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This flag is not used by any caller, remove it.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2019-05-31

This series provides some updates to mlx5 core and netdevice driver.

1) use __netdev_tx_sent_queue() to improve performance under GSO workload

2) Allow matching only enc_key_id/enc_dst_port for decapsulation action

3) Geneve support:
This patchset adds support for GENEVE tunnel encap/decap flows offload:
encapsulating layer 2 Ethernet frames within layer 4 UDP datagrams.
The driver supports 6081 destination UDP port number, which is the
default IANA-assigned port.

Encap:
  ConnectX-5 inserts the header (w/ or w/o Geneve TLV options) that is
  provided by the mlx5 driver to the outgoing packet.

Decap:
  Geneve header is matched and the packet is decapsulated.
  Notes about decap flows with Geneve TLV Options:
   - Support offloading of 32-bit options data only
   - At any given time, only one combination of class/type parameters
     can be offloaded, but the same class/type combination can have
     many different flows offloaded with different 32-bit option data
   - Options with value of 0 can't be offloaded

Managing Geneve TLV options:
  Matching (on receive) is done by ConnectX-5 flex parser.
  Geneve TLV options are managed using General Object of type
  “Geneve TLV Options”.

  When the first flow with a certain class/type values is requested
  to be offloaded, the driver creates a FW object with FW command
  (Geneve TLV Options general object) and starts counting the number
  of flows using this object.

  During this time, any request with a different class/type values
  will fail to be offloaded.
  Once the refcount reaches 0, the driver destroys the TLV options
  general object, and can now offload a flow with any class/type parameters.

  Geneve TLV Options object is added to core device.
  It is currently used to manage Geneve TLV options general
  object allocation in FW and its reference counting only.

  In the future it will also be used for managing geneve ports
  by registering callbacks for ndo_udp_tunnel_add/del.

TC tunnel code refactoring:
  As a preparation for Geneve code, the TC tunnel code in mlx5
  was rearranged in a modular way, so that it would be easier
  to add future tunnels:
   - Defined tc tunnel object with the fields and callbacks that
     any tunnel must implement.
   - Define tc UDP tunnel object for UDP tunnels, such as VXLAN
   - Move each tunnel code (GRE, VXLAN) to its own separate file
   - Rewrite tc tunnel implementation in a general way – using
     only the objects and their callbacks.

4) Termination tables:
Actions in tables set with the termination flag are guaranteed to terminate
the action list. Thus, potential looping functionality (e.g. haripin) can safely be
executed without potential loops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sameeh Jubran says:

====================
Extending the ena driver to support new features and enhance performance

This patchset introduces the following:

* add support for changing the inline header size (max_header_size) for applications
  with overlay and nested headers
* enable automatic fallback to polling mode for admin queue when interrupt is not
  available or missed
* add good checksum counter for Rx ethtool statistics
* update ena.txt
* some minor code clean-up
* some performance enhancements with doorbell calculations

Differences from V1:

* net: ena: add handling of llq max tx burst size (1/11):
 * fixed christmas tree issue

* net: ena: ethtool: add extra properties retrieval via get_priv_flags (2/11):
 * replaced snprintf with strlcpy
 * dropped confusing error message
 * added more details to  the commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new statistics to ETHTOOL to specify if the device calculated
and validated the Rx csum.
Signed-off-by: Evgeny Shmeilin <evgeny@annapurnaLabs.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch initially checks if CQ doorbell
is needed before proceeding with the calculations.
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Up until now the driver always used a single setting for the sizes
of the different parts of the llq entry - 128 for entry size, 2 for
descriptors before header and 96 for maximum header size.

The current code makes sure that the parts of the llq entry are
compatible with each other and with the initial llq entry size given
by the device.

This commit changes this code to support any llq entry size
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable fallback to polling mode for Admin queue
when identified a command response arrival
without an accompanying MSI-X interrupt
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Small cosmetic changes to ena.txt
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some pr_err prints lacked '\n' in the end. Added where missing.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reverse christmas tree arrangement is when strings are written from longer
to shorter with each line. Most of our functions are abiding this
arrangement but this function does not.

In this commit we arrange the variables of ena_probe() in reverse christmas
tree.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct ena_ring holds a union of free_rx_ids and free_tx_ids.
Both of the above fields mean the exact same thing and are used
exactly the same way.
Furthermore, these fields are always used with a prefix of the
type of ring. So for tx it will be tx_ring->free_tx_ids, and for
rx it will be rx_ring->free_rx_ids, which shows how redundant the
"_tx" and "_rx" parts are.
Furthermore still, this may lead to confusing code like where
tx_ring->free_rx_ids which works correctly but looks like a mess.

This commit removes the aforementioned redundancy by replacing the
free_rx/tx_ids union with a single free_ids field.
It also changes a single goto label name from err_free_tx_ids: to
err_tx_free_ids: for consistency with the above new notation.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit adds a mechanism for exposing different device
properties via ethtool's priv_flags. The strings are provided
by the device and copied to user space through the driver.

In this commit we:

Add commands, structs and defines necessary for handling
extra properties

Add functions for:
Allocation/destruction of a buffer for extra properties strings.
Retreival of extra properties strings and flags from the network device.

Handle the allocation of a buffer for extra properties strings.

* Initialize buffer with extra properties strings from the
  network device at driver startup.

Use ethtool's get_priv_flags to expose extra properties of
the ENA device
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a maximum TX burst size that the ENA device can handle.
It is exposed by the device to the driver and the driver
needs to comply with it to avoid bugs.

In this commit we:
1. Add ena_com_is_doorbell_needed(), which calculates the number of
   llq entries that will be used to hold a packet, and will return
   true if they exceed the number of allowed entries in a burst.
   If the function returns true, a doorbell needs to be invoked
   to send this packet in the next burst.

2. Follow the available entries in the current burst:
   - Every doorbell a new burst begins
   - With each write of an llq entry, the available entries in the
     current burst are decreased by 1.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mv88e6xxx_g1_stats_wait has no users outside global1.c, so make it
static.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The macros have an extraneous '800' (after 0180C2 there should be just
six nibbles, with X representing one), while the comments have
interchanged c2 and 80 and an extra :00.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add entry to MAINTAINERS file for new nexthop code.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
r8169: replace several function pointers with direct calls

This series removes most function pointers from struct rtl8169_private
and uses direct calls instead. This simplifies the code and avoids
the penalty of indirect calls in times of retpoline.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace indirect call to tso_csum with direct calls. To do this we have
to move rtl_chip_supports_csum_v2().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The jumbo_ops are used in just one place, so we can simplify the code
and avoid the penalty of indirect calls in times of retpoline.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mdio_ops are used in just one place, so we can simplify the code
and avoid the penalty of indirect calls in times of retpoline.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use helper skb_is_gso() and simplify access to tx_dropped.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pci_device_to_OF_node(to_pci_dev(dev)) is the same as dev->of_node,
so we can simplify the code. In addition add an empty line before
the return statement.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
net: add rcu annotations for ifa_list

v3: fix typo in patch1 commit message
    All other patches are unchanged.
v2: remove ifa_list iteration in afs instead of conversion

Eric Dumazet reported following problem:

  It looks that unless RTNL is held, accessing ifa_list needs proper RCU
  protection.  indev->ifa_list can be changed under us by another cpu
  (which owns RTNL) [..]

  A proper rcu_dereference() with an happy sparse support would require
  adding __rcu attribute.

This patch series does that: add __rcu to the ifa_list pointers.
That makes sparse complain, so the series also adds the required
rcu_assign_pointer/dereference helpers where needed.

All patches except the last one are preparation work.
Two new macros are introduced for in_ifaddr walks.

Last patch adds the __rcu annotations and the assign_pointer/dereference
helper calls.

This patch is a bit large, but I found no better way -- other
approaches (annotate-first or add helpers-first) all result in
mid-series sparse warnings.

This series is submitted vs. net-next rather than net for several
reasons:

1. Its (mostly) compile-tested only
2. 3rd patch changes behaviour wrt. secondary addresses
   (see changelog)
3. The problem exists for a very long time (2004), so it doesn't
   seem to be urgent to fix this -- rcu use to free ifa_list
   predates the git era.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

ifa_list is protected by rcu, yet code doesn't reflect this.

Add the __rcu annotations and fix up all places that are now reported by
sparse.

I've done this in the same commit to not add intermediate patches that
result in new warnings.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Like previous patches, use the new iterator macros to avoid sparse
warnings once proper __rcu annotations are added.

Compile tested only.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use in_dev_for_each_ifa_rcu/rtnl instead.
This prevents sparse warnings once proper __rcu annotations are added.
Signed-off-by: Florian Westphal <fw@strlen.de>

t di# Last commands done (6 commands done):
Signed-off-by: David S. Miller <davem@davemloft.net>

Netfilter hooks are always running under rcu read lock, use
the new iterator macro so sparse won't complain once we add
proper __rcu annotations.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This also replaces spots that used for_primary_ifa().

for_primary_ifa() aborts the loop on the first secondary address seen.

Replace it with either the rcu or rtnl variant of in_dev_for_each_ifa(),
but two places will now also consider secondary addresses too:
inet_addr_onlink() and inet_ifa_byprefix().

I do not understand why they should ignore secondary addresses.

Why would a secondary address not be considered 'on link'?
When matching a prefix, why ignore a matching secondary address?

Other places get converted as well, but gain "->flags & SECONDARY" check.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ifa_list is protected either by rcu or rtnl lock, but the
current iterators do not account for this.

This adds two iterators as replacement, a later patch in
the series will update them with the needed rcu/rtnl_dereference calls.

Its not done in this patch yet to avoid sparse warnings -- the fields
lack the proper __rcu annotation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:
  I'm told that there's not really any point populating the list.
  Current OpenAFS ignores it, as does AuriStor - and IBM AFS 3.6 will
  do the right thing.
  The list is actually useless as it's the client's view of the world,
  not the servers, so if there's any NAT in the way its contents are
  invalid.  Further, it doesn't support IPv6 addresses.

  On that basis, feel free to make it an empty list and remove all the
  interface enumeration.

V1 of this patch reworked the function to use a new helper for the
ifa_list iteration to avoid sparse warnings once the proper __rcu
annotations get added in struct in_device later.

But, in light of the above, just remove afs_get_ipv4_interfaces.

Compile tested only.

Cc: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable rc is assigned with a value that is never read and
it is re-assigned a new value later on.  The assignment is redundant
and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arnd Bergmann says:

====================
isdn: deprecate non-mISDN drivers

When isdn4linux came up in the context of another patch series, I
remembered that we had discussed removing it a while ago.

It turns out that the suggestion from Karsten Keil wa to remove I4L
in 2018 after the last public ISDN networks are shut down. This has
happened now (with a very small number of exceptions), so I guess it's
time to try again.

We currently have three ISDN stacks in the kernel: the original
isdn4linux (with the hisax driver), the newer CAPI (with four drivers),
and finally the mISDN stack (supporting roughly the same hardware as
hisax).

As far as I can tell, anyone using ISDN with mainline kernel drivers in
the past few years uses mISDN, and this is typically used for voice-only
PBX installations that don't require a public network.

The older stacks support additional features for data networks, but those
typically make no sense any more if there is no network to connect to.

My proposal for this time is to kill off isdn4linux entirely, as it seems
to have been unusable for quite a while. This code has been abandoned
for many years and it does cause problems for treewide maintenance as
it tends to do everything that we try to stop doing.
Birger Harzenetter mentioned that is is still using i4l in order to
make use of the 'divert' feature that is not part of mISDN, but has
otherwise moved on to mISDN for normal operation, like apparently
everyone else.

CAPI in turn is not quite as obsolete, but two of the drivers (avm
and hysdn) don't seem to be used at all, while another one (gigaset)
will stop being maintained as Paul Bolle is no longer able to
test it after the network gets shut down in September.
All three are now moved into drivers/staging to let others speak
up in case there are remaining users.
This leaves Bluetooth CMTP as the only remaining user of CAPI, but
Marcel Holtmann wishes to keep maintaining it.

For the discussion on version 1, see [2]
Unfortunately, Karsten Keil as the maintainer has not participated in
the discussion.

      Arnd

[1] https://patchwork.kernel.org/patch/8484861/#17900371
[2] https://listserv.isdn4linux.de/pipermail/isdn4linux/2019-April/thread.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Horatiu Vultur says:

====================
Add hw offload of TC flower on MSCC Ocelot

This patch series enables hardware offload for flower filter used in
traffic controller on MSCC Ocelot board.

v2->v3 changes:
 - remove the check for shared blocks

v1->v2 changes:
 - when declaring variables use reverse christmas tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Hardware offload of port filtering are now supported via tc command using
flower filter. ACL rules are used to enable the hardware offload.
The following keys are supported:

vlan_id
vlan_prio
dst_mac/src_mac for non IP frames
dst_ip/src_ip
dst_port/src_port

The following actions are supported:
trap
drop

These filters are supported only on the ingress schedulare.

Add:
tc qdisc add dev eth3 ingress
tc filter ad dev eth3 parent ffff: ip_proto ip flower \
    ip_proto tcp dst_port 80 action drop
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ACL support using the TCAM. Using ACL it is possible to create rules
in hardware to filter/redirect frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add functional test cases for nexthop objects.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset container Netfilter/IPVS update for net-next:

1) Add UDP tunnel support for ICMP errors in IPVS.

Julian Anastasov says:

This patchset is a followup to the commit that adds UDP/GUE tunnel:
"ipvs: allow tunneling with gue encapsulation".

What we do is to put tunnel real servers in hash table (patch 1),
add function to lookup tunnels (patch 2) and use it to strip the
embedded tunnel headers from ICMP errors (patch 3).

2) Extend xt_owner to match for supplementary groups, from
   Lukasz Pawelczyk.

3) Remove unused oif field in flow_offload_tuple object, from
   Taehee Yoo.

4) Release basechain counters from workqueue to skip synchronize_rcu()
   call. From Florian Westphal.

5) Replace skb_make_writable() by skb_ensure_writable(). Patchset
   from Florian Westphal.

6) Checksum support for gue encapsulation in IPVS, from Jacky Hu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2019-05-31

The following pull-request contains BPF updates for your *net-next* tree.

Lots of exciting new features in the first PR of this developement cycle!
The main changes are:

1) misc verifier improvements, from Alexei.

2) bpftool can now convert btf to valid C, from Andrii.

3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs.
   This feature greatly improves BPF speed on 32-bit architectures. From Jiong.

4) cgroups will now auto-detach bpf programs. This fixes issue of thousands
   bpf programs got stuck in dying cgroups. From Roman.

5) new bpf_send_signal() helper, from Yonghong.

6) cgroup inet skb programs can signal CN to the stack, from Lawrence.

7) miscellaneous cleanups, from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>