- 07 Feb, 2020 2 commits
-
-
Damien Le Moal authored
Add the new file Documentation/filesystems/zonefs.txt to document zonefs principles and user-space tool usage. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com>
-
Damien Le Moal authored
zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com>
-
- 27 Jan, 2020 1 commit
-
-
Linus Torvalds authored
-
- 26 Jan, 2020 9 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Fix for two regressions in this cycle, both reported by the postgresql use case. One removes the added restriction on who can submit IO, making it possible for rings shared across forks to do so. The other fixes an issue for the same kind of use case, where one exiting process would cancel all IO" * tag 'io_uring-5.5-2020-01-26' of git://git.kernel.dk/linux-block: io_uring: don't cancel all work on process exit Revert "io_uring: only allow submit from owning task"
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Unfortunately this weekend we had a few last minute reports, one was for block. The partition disable for zoned devices was overly restrictive, it can work (and be supported) just fine for host-aware variants. Here's a fix ensuring that's the case so we don't break existing users of that" * tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block: block: allow partitions on host aware zone devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two last minute fixes, both in drivers. The fnic one is a highly unlikely condition, but the RDMA one is a recently introduced regression that causes a kernel warning to trigger in every RDMA logon, which would be unsightly if it got into the final release" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: RDMA/isert: Fix a recently introduced regression related to logout scsi: fnic: do not queue commands during fwreset
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fix from Al Viro: "Fix a use-after-free in do_last() handling of sysctl_protected_... checks. The use-after-free normally doesn't happen there, but race with rename() and it becomes possible" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_last(): fetch directory ->i_mode and ->i_uid before it's too late
-
Jens Axboe authored
If we're sharing the ring across forks, then one process exiting means that we cancel ALL work and prevent future work. This is overly restrictive. As long as we cancel the work associated with the files from the current task, it's safe to let others persist. Normal fd close on exit will still wait (and cancel) pending work. Fixes: fcb323cc ("io_uring: io_uring: add support for async work inheriting files") Reported-by:
Andres Freund <andres@anarazel.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Host-aware SMR drives can be used with the commands to explicitly manage zone state, but they can also be used as normal disks. In the former case it makes perfect sense to allow partitions on them, in the latter it does not, just like for host managed devices. Add a check to add_partition to allow partitions on host aware devices, but give up any zone management capabilities in that case, which also catches the previously missed case of adding a partition vs just scanning it. Because sd can rescan the attribute at runtime it needs to check if a disk has partitions, for which a new helper is added to genhd.h. Fixes: 5eac3eb3 ("block: Remove partition support for zoned block devices") Reported-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
This ends up being too restrictive for tasks that willingly fork and share the ring between forks. Andres reports that this breaks his postgresql work. Since we're close to 5.5 release, revert this change for now. Cc: stable@vger.kernel.org Fixes: 44d28279 ("io_uring: only allow submit from owning task") Reported-by:
Andres Freund <andres@anarazel.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
David Howells authored
The afs filesystem needs to prohibit certain characters from cell names, such as '/', as these are used to form filenames in procfs, leading to the following warning being generated: WARNING: CPU: 0 PID: 3489 at fs/proc/generic.c:178 Fix afs_alloc_cell() to disallow nonprintable characters, '/', '@' and names that begin with a dot. Remove the check for "@cell" as that is then redundant. This can be tested by running: echo add foo/.bar 1.2.3.4 >/proc/fs/afs/cells Note that we will also need to deal with: - Names ending in ".invalid" shouldn't be passed to the DNS. - Names that contain non-valid domainname chars shouldn't be passed to the DNS. - DNS replies that say "your-dns-needs-immediate-attention.<gTLD>" and replies containing A records that say 127.0.53.53 should be considered invalid. [https://www.icann.org/en/system/files/files/name-collision-mitigation-01aug14-en.pdf] but these need to be dealt with by the kafs-client DNS program rather than the kernel. Reported-by: syzbot+b904ba7c947a37b4b291@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
may_create_in_sticky() call is done when we already have dropped the reference to dir. Fixes: 30aba665 (namei: allow restricted O_CREAT of FIFOs and regular files) Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 25 Jan, 2020 14 commits
-
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - fix ftrace relocation type filtering - relax arch timer version check * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8955/1: virt: Relax arch timer version check during early boot ARM: 8950/1: ftrace/recordmcount: filter relocation types
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Off by one in mt76 airtime calculation, from Dan Carpenter. 2) Fix TLV fragment allocation loop condition in iwlwifi, from Luca Coelho. 3) Don't confirm neigh entries when doing ipsec pmtu updates, from Xu Wang. 4) More checks to make sure we only send TSO packets to lan78xx chips that they can actually handle. From James Hughes. 5) Fix ip_tunnel namespace move, from William Dauchy. 6) Fix unintended packet reordering due to cooperation between listification done by GRO and non-GRO paths. From Maxim Mikityanskiy. 7) Add Jakub Kicincki formally as networking co-maintainer. 8) Info leak in airo ioctls, from Michael Ellerman. 9) IFLA_MTU attribute needs validation during rtnl_create_link(), from Eric Dumazet. 10) Use after free during reload in mlxsw, from Ido Schimmel. 11) Dangling pointers are possible in tp->highest_sack, fix from Eric Dumazet. 12) Missing *pos++ in various networking seq_next handlers, from Vasily Averin. 13) CHELSIO_GET_MEM operation neds CAP_NET_ADMIN check, from Michael Ellerman. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (109 commits) firestream: fix memory leaks net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEM net: bcmgenet: Use netif_tx_napi_add() for TX NAPI tipc: change maintainer email address net: stmmac: platform: fix probe for ACPI devices net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path net/mlx5e: kTLS, Remove redundant posts in TX resync flow net/mlx5e: kTLS, Fix corner-case checks in TX resync flow net/mlx5e: Clear VF config when switching modes net/mlx5: DR, use non preemptible call to get the current cpu number net/mlx5: E-Switch, Prevent ingress rate configuration of uplink rep net/mlx5: DR, Enable counter on non-fwd-dest objects net/mlx5: Update the list of the PCI supported devices net/mlx5: Fix lowest FDB pool size net: Fix skb->csum update in inet_proto_csum_replace16(). netfilter: nf_tables: autoload modules from the abort path netfilter: nf_tables: add __nft_chain_type_get() netfilter: nf_tables_offload: fix check the chain offload flag netfilter: conntrack: sctp: use distinct states for new SCTP connections ipv6_route_seq_next should increase position index ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A couple of fixes have come in that would be good to include in this release: - A fix for amount of memory on Beaglebone Black. Surfaced now since GRUB2 doesn't update memory size in the booted kernel. - A fix to make SPI interfaces work on am43x-epos-evm. - Small Kconfig fix for OPTEE (adds a depend on MMU) to avoid build failures" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1 tee: optee: Fix compilation issue with nommu ARM: dts: am335x-boneblack-common: fix memory size
-
Wenwen Wang authored
In fs_open(), 'vcc' is allocated through kmalloc() and assigned to 'atm_vcc->dev_data.' In the following execution, if an error occurs, e.g., there is no more free channel, an error code EBUSY or ENOMEM will be returned. However, 'vcc' is not deallocated, leading to memory leaks. Note that, in normal cases where fs_open() returns 0, 'vcc' will be deallocated in fs_close(). But, if fs_open() fails, there is no guarantee that fs_close() will be invoked. To fix this issue, deallocate 'vcc' before the error code is returned. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing netlink attribute sanity check for NFTA_OSF_DREG, from Florian Westphal. 2) Use bitmap infrastructure in ipset to fix KASAN slab-out-of-bounds reads, from Jozsef Kadlecsik. 3) Missing initial CLOSED state in new sctp connection through ctnetlink events, from Jiri Wiesner. 4) Missing check for NFT_CHAIN_HW_OFFLOAD in nf_tables offload indirect block infrastructure, from wenxu. 5) Add __nft_chain_type_get() to sanity check family and chain type. 6) Autoload modules from the nf_tables abort path to fix races reported by syzbot. 7) Remove unnecessary skb->csum update on inet_proto_csum_replace16(), from Praveen Chaudhary. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fix from David Sterba: "Here's a last minute fix for a regression introduced in this development cycle. There's a small chance of a silent corruption when device replace and NOCOW data writes happen at the same time in one block group. Metadata or COW data writes are unaffected. The extra fixup patch is there to silence an unnecessary warning" * tag 'for-5.5-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: dev-replace: remove warning for unknown return codes when finished btrfs: scrub: Require mandatory block group RO for dev-replace
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fix from Linus Walleij: "A single fix for the Intel Sunrisepoint pin controller that makes the interrupts work properly on it" * tag 'pinctrl-v5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunrisepoint: Add missing Interrupt Status register offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-01-24 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. Merge conflict: once merge with net-next, a contextual conflict will appear in drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c since the code moved in net-next. To resolve, just delete ALL of the conflicting hunk from net. So sorry for the small mess .. For -stable v5.4: ('net/mlx5: Update the list of the PCI supported devices') ('net/mlx5: Fix lowest FDB pool size') ('net/mlx5e: kTLS, Fix corner-case checks in TX resync flow') ('net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path') ('net/mlx5: Eswitch, Prevent ingress rate configuration of uplink rep') ('net/mlx5e: kTLS, Remove redundant posts in TX resync flow') ('net/mlx5: DR, Enable counter on non-fwd-dest objects') ('net/mlx5: DR, use non preemptible call to get the current cpu number') ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Sterba authored
The fstests btrfs/011 triggered a warning at the end of device replace, [ 1891.998975] BTRFS warning (device vdd): failed setting block group ro: -28 [ 1892.038338] BTRFS error (device vdd): btrfs_scrub_dev(/dev/vdd, 1, /dev/vdb) failed -28 [ 1892.059993] ------------[ cut here ]------------ [ 1892.063032] WARNING: CPU: 2 PID: 2244 at fs/btrfs/dev-replace.c:506 btrfs_dev_replace_start.cold+0xf9/0x140 [btrfs] [ 1892.074346] CPU: 2 PID: 2244 Comm: btrfs Not tainted 5.5.0-rc7-default+ #942 [ 1892.079956] RIP: 0010:btrfs_dev_replace_start.cold+0xf9/0x140 [btrfs] [ 1892.096576] RSP: 0018:ffffbb58c7b3fd10 EFLAGS: 00010286 [ 1892.098311] RAX: 00000000ffffffe4 RBX: 0000000000000001 RCX: 8888888888888889 [ 1892.100342] RDX: 0000000000000001 RSI: ffff9e889645f5d8 RDI: ffffffff92821080 [ 1892.102291] RBP: ffff9e889645c000 R08: 000001b8878fe1f6 R09: 0000000000000000 [ 1892.104239] R10: ffffbb58c7b3fd08 R11: 0000000000000000 R12: ffff9e88a0017000 [ 1892.106434] R13: ffff9e889645f608 R14: ffff9e88794e1000 R15: ffff9e88a07b5200 [ 1892.108642] FS: 00007fcaed3f18c0(0000) GS:ffff9e88bda00000(0000) knlGS:0000000000000000 [ 1892.111558] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1892.113492] CR2: 00007f52509ff420 CR3: 00000000603dd002 CR4: 0000000000160ee0 [ 1892.115814] Call Trace: [ 1892.116896] btrfs_dev_replace_by_ioctl+0x35/0x60 [btrfs] [ 1892.118962] btrfs_ioctl+0x1d62/0x2550 [btrfs] caused by the previous patch ("btrfs: scrub: Require mandatory block group RO for dev-replace"). Hitting ENOSPC is possible and could happen when the block group is set read-only, preventing NOCOW writes to the area that's being accessed by dev-replace. This has happend with scratch devices of size 12G but not with 5G and 20G, so this is depends on timing and other activity on the filesystem. The whole replace operation is restartable, the space state should be examined by the user in any case. The error code is propagated back to the ioctl caller so the kernel warning is causing false alerts. Signed-off-by:
David Sterba <dsterba@suse.com>
-
Michael Ellerman authored
The cxgb3 driver for "Chelsio T3-based gigabit and 10Gb Ethernet adapters" implements a custom ioctl as SIOCCHIOCTL/SIOCDEVPRIVATE in cxgb_extension_ioctl(). One of the subcommands of the ioctl is CHELSIO_GET_MEM, which appears to read memory directly out of the adapter and return it to userspace. It's not entirely clear what the contents of the adapter memory contains, but the assumption is that it shouldn't be accessible to all users. So add a CAP_NET_ADMIN check to the CHELSIO_GET_MEM case. Put it after the is_offload() check, which matches two of the other subcommands in the same function which also check for is_offload() and CAP_NET_ADMIN. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by:
Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Before commit 7587935c ("net: bcmgenet: move NAPI initialization to ring initialization") moved the code, this used to be netif_tx_napi_add(), but we lost that small semantic change in the process, restore that. Fixes: 7587935c ("net: bcmgenet: move NAPI initialization to ring initialization") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
Reflecting new realities. Signed-off-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ajay Gupta authored
Use generic device API to get phy mode to fix probe failure with ACPI based devices. Signed-off-by:
Ajay Gupta <ajayg@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - add sanity checks to USB endpoints in various dirvers - max77650-onkey was missing an OF table which was preventing module autoloading - a revert and a different fix for F54 handling in Synaptics dirver - a fixup for handling register in pm8xxx vibrator driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pm8xxx-vib - fix handling of separate enable register Input: keyspan-remote - fix control-message timeouts Input: max77650-onkey - add of_match table Input: rmi_f54 - read from FIFO in 32 byte blocks Revert "Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers" Input: sur40 - fix interface sanity checks Input: gtco - drop redundant variable reinit Input: gtco - fix extra-descriptor debug message Input: gtco - fix endpoint sanity check Input: aiptek - use descriptors of current altsetting Input: aiptek - fix endpoint sanity check Input: pegasus_notetaker - fix endpoint sanity check Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register Input: evdev - convert kzalloc()/vzalloc() to kvzalloc()
-
- 24 Jan, 2020 14 commits
-
-
Olof Johansson authored
Merge tag 'omap-for-fixes-whenever-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few minor fixes for omaps Looks like we have wrong default memory size for beaglebone black, it has at least 512 MB of RAM and not 256 MB. This causes an issue when booted with GRUB2 that does not seem to pass memory info to the kernel. And for am43x-epos-evm the SPI pin directions need to be configured for SPI to work. * tag 'omap-for-fixes-whenever-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1 ARM: dts: am335x-boneblack-common: fix memory size Link: https://lore.kernel.org/r/pull-1579895109-287828@atomide.comSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'tee-optee-fix2-for-5.5' of https://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes Fix OP-TEE compile error with nommu * tag 'tee-optee-fix2-for-5.5' of https://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: Fix compilation issue with nommu Link: https://lore.kernel.org/r/20200123101310.GA10320@jaxSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Tariq Toukan authored
When TCP out-of-order is identified (unexpected tcp seq mismatch), driver analyzes the packet and decides what handling should it get: 1. go to accelerated path (to be encrypted in HW), 2. go to regular xmit path (send w/o encryption), 3. drop. Packets marked with skb->decrypted by the TLS stack in the TX flow skips SW encryption, and rely on the HW offload. Verify that such packets are never sent un-encrypted on the wire. Add a WARN to catch such bugs, and prefer dropping the packet in these cases. Fixes: 46a3ea98 ("net/mlx5e: kTLS, Enhance TX resync flow") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
The call to tx_post_resync_params() is done earlier in the flow, the post of the control WQEs is unnecessarily repeated. Remove it. Fixes: 700ec497 ("net/mlx5e: kTLS, Fix missing SQ edge fill") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
There are the following cases: 1. Packet ends before start marker: bypass offload. 2. Packet starts before start marker and ends after it: drop, not supported, breaks contract with kernel. 3. packet ends before tls record info starts: drop, this packet was already acknowledged and its record info was released. Add the above as comment in code. Mind possible wraparounds of the TCP seq, replace the simple comparison with a call to the TCP before() method. In addition, remove logic that handles negative sync_len values, as it became impossible. Fixes: d2ead1f3 ("net/mlx5e: Add kTLS TX HW offload support") Fixes: 46a3ea98 ("net/mlx5e: kTLS, Enhance TX resync flow") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Dmytro Linkin authored
Currently VF in LEGACY mode are not able to go up. Also in OFFLOADS mode, when switching to it first time, VF can go up independently to his representor, which is not expected. Perform clearing of VF config when switching modes and set link state to AUTO as default value. Also, when switching to OFFLOADS mode set link state to DOWN, which allow VF link state to be controlled by its REP. Fixes: 1ab2068a ("net/mlx5: Implement vports admin state backup/restore") Fixes: 556b9d16 ("net/mlx5: Clear VF's configuration on disabling SRIOV") Signed-off-by:
Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Erez Shitrit authored
Use raw_smp_processor_id instead of smp_processor_id() otherwise we will get the following trace in debug-kernel: BUG: using smp_processor_id() in preemptible [00000000] code: devlink caller is dr_create_cq.constprop.2+0x31d/0x970 [mlx5_core] Call Trace: dump_stack+0x9a/0xf0 debug_smp_processor_id+0x1f3/0x200 dr_create_cq.constprop.2+0x31d/0x970 genl_family_rcv_msg+0x5fd/0x1170 genl_rcv_msg+0xb8/0x160 netlink_rcv_skb+0x11e/0x340 Fixes: 297ccceb ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Eli Cohen authored
Since the implementation relies on limiting the VF transmit rate to simulate ingress rate limiting, and since either uplink representor or ecpf are not associated with a VF, we limit the rate limit configuration for those ports. Fixes: fcb64c0f ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Erez Shitrit authored
The current code handles only counters that attached to dest, we still have the cases where we have counter on non-dest, like over drop etc. Fixes: 6a48faee ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by:
Hamdan Igbaria <hamdani@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Meir Lichtinger authored
Add the upcoming ConnectX-7 device ID. Fixes: 85327a9c ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by:
Meir Lichtinger <meirl@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Paul Blakey authored
The pool sizes represent the pool sizes in the fw. when we request a pool size from fw, it will return the next possible group. We track how many pools the fw has left and start requesting groups from the big to the small. When we start request 4k group, which doesn't exists in fw, fw wants to allocate the next possible size, 64k, but will fail since its exhausted. The correct smallest pool size in fw is 128 and not 4k. Fixes: e52c2802 ("net/mlx5: E-Switch, Add chains and priorities") Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Praveen Chaudhary authored
skb->csum is updated incorrectly, when manipulation for NF_NAT_MANIP_SRC\DST is done on IPV6 packet. Fix: There is no need to update skb->csum in inet_proto_csum_replace16(), because update in two fields a.) IPv6 src/dst address and b.) L4 header checksum cancels each other for skb->csum calculation. Whereas inet_proto_csum_replace4 function needs to update skb->csum, because update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum and c.) L4 header checksum results in same diff as L4 Header checksum for skb->csum calculation. [ pablo@netfilter.org: a few comestic documentation edits ] Signed-off-by:
Praveen Chaudhary <pchaudhary@linkedin.com> Signed-off-by:
Zhenggen Xu <zxu@linkedin.com> Signed-off-by:
Andy Stracner <astracner@linkedin.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This patch introduces a list of pending module requests. This new module list is composed of nft_module_request objects that contain the module name and one status field that tells if the module has been already loaded (the 'done' field). In the first pass, from the preparation phase, the netlink command finds that a module is missing on this list. Then, a module request is allocated and added to this list and nft_request_module() returns -EAGAIN. This triggers the abort path with the autoload parameter set on from nfnetlink, request_module() is called and the module request enters the 'done' state. Since the mutex is released when loading modules from the abort phase, the module list is zapped so this is iteration occurs over a local list. Therefore, the request_module() calls happen when object lists are in consistent state (after fulling aborting the transaction) and the commit list is empty. On the second pass, the netlink command will find that it already tried to load the module, so it does not request it again and nft_request_module() returns 0. Then, there is a look up to find the object that the command was missing. If the module was successfully loaded, the command proceeds normally since it finds the missing object in place, otherwise -ENOENT is reported to userspace. This patch also updates nfnetlink to include the reason to enter the abort phase, which is required for this new autoload module rationale. Fixes: ec7470b8 ("netfilter: nf_tables: store transaction list locally while requesting module") Reported-by: syzbot+29125d208b3dae9a7019@syzkaller.appspotmail.com Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This new helper function validates that unknown family and chain type coming from userspace do not trigger an out-of-bound array access. Bail out in case __nft_chain_type_get() returns NULL from nft_chain_parse_hook(). Fixes: 9370761c ("netfilter: nf_tables: convert built-in tables/chains to chain types") Reported-by: syzbot+156a04714799b1d480bc@syzkaller.appspotmail.com Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-