- 26 May, 2020 15 commits
-
-
Yuval Basson authored
In older FW versions the completion flag was treated as the ack flag in edpm messages. Expose the FW option of setting which mode the QP is in by adding a flag to the qedr <-> qed API. Flag is added for backward compatibility with libqedr. This flag will be set by qedr after determining whether the libqedr is using the updated version. Fixes: f1093940 ("qed: Add support for QP verbs") Signed-off-by:
Yuval Basson <yuval.bason@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
I missed the fact that tcp_v4_err() differs from tcp_v6_err(). After commit 4d1a2d9e ("Rename skb to icmp_skb in tcp_v4_err()") the skb argument has been renamed to icmp_skb only in one function. I will in a future patch reconciliate these functions to avoid this kind of confusion. Fixes: 45af29ca ("tcp: allow traceroute -Mtcp for unpriv users") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: sync hw config for few chip versions with r8168 vendor driver Sync hw config for few chip versions with r8168 vendor driver. ==================== Signed-off-by: -
Heiner Kallweit authored
Sync hw config for RTL8168f/RTL8411 with r8168 vendor driver. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Sync hw config for RTL8168evl with r8168 vendor driver. Signed-off-by:
-
Heiner Kallweit authored
Sync hw config for RTL8168h with r8168 vendor driver. Signed-off-by:
-
Heiner Kallweit authored
Sync hw config for RTL8168g with r8168 vendor driver. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-2020-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.8 Second set of patches for v5.8. Lots of new features and new supported hardware for mt76. Also rtw88 got new hardware support. Major changes: rtw88 * add support for Realtek 8723DE PCI adapter * rename rtw88.ko/rtwpci.ko to rtw88_core.ko/rtw88_pci.ko iwlwifi * stop supporting swcrypto and bt_coex_active module parameters on mvm devices * enable A-AMSDU in low latency mt76 * new devices for mt76x0/mt76x2 * support for non-offload firmware on mt7663 * hw/sched scan support for mt7663 * mt7615/mt7663 MSI support * TDLS support * mt7603/mt7615 rate control fixes * new driver for mt7915 * wowlan support for mt7663 * suspend/resume support for mt7663 ==================== Signed-off-by:
-
Horatiu Vultur authored
The issue was reported by syzbot. When the function br_mrp_parse was called with a valid net_bridge_port, the net_bridge was an invalid pointer. Therefore the check br->stp_enabled could pass/fail depending where it was pointing in memory. The fix consists of setting the net_bridge pointer if the port is a valid pointer. Reported-by: syzbot+9c6f0f1f8e32223df9a4@syzkaller.appspotmail.com Fixes: 65369933 ("bridge: mrp: Integrate MRP into the bridge") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Wang Wenhu authored
Print certain name string instead of hard-coded "memory" for dev_err output, which would be more accurate and helpful for debugging. Signed-off-by:
Wang Wenhu <wenhu.wang@vivo.com> Cc: Alex Elder <elder@kernel.org> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Richard Cochran authored
In commit 184ecc9e ("ptp: Add adjphase function to support phase offset control.") the PTP Hardware Clock interface expanded to support the ADJ_OFFSET offset mode. However, the implementation did not respect the traditional yet pedantic distinction between units of microseconds and nanoseconds signaled by the ADJ_NANO flag. This patch fixes the issue by adding logic to handle that flag. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Reviewed-by:
Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by:
-
Eric Dumazet authored
Unpriv users can use traceroute over plain UDP sockets, but not TCP ones. $ traceroute -Mtcp 8.8.8.8 You do not have enough privileges to use this traceroute method. $ traceroute -n -Mudp 8.8.8.8 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 192.168.86.1 3.631 ms 3.512 ms 3.405 ms 2 10.1.10.1 4.183 ms 4.125 ms 4.072 ms 3 96.120.88.125 20.621 ms 19.462 ms 20.553 ms 4 96.110.177.65 24.271 ms 25.351 ms 25.250 ms 5 69.139.199.197 44.492 ms 43.075 ms 44.346 ms 6 68.86.143.93 27.969 ms 25.184 ms 25.092 ms 7 96.112.146.18 25.323 ms 96.112.146.22 25.583 ms 96.112.146.26 24.502 ms 8 72.14.239.204 24.405 ms 74.125.37.224 16.326 ms 17.194 ms 9 209.85.251.9 18.154 ms 209.85.247.55 14.449 ms 209.85.251.9 26.296 ms^C We can easily support traceroute over TCP, by queueing an error message into socket error queue. Note that applications need to set IP_RECVERR/IPV6_RECVERR option to enable this feature, and that the error message is only queued while in SYN_SNT state. socket(AF_INET6, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_IPV6, IPV6_RECVERR, [1], 4) = 0 setsockopt(3, SOL_SOCKET, SO_TIMESTAMP_OLD, [1], 4) = 0 setsockopt(3, SOL_IPV6, IPV6_UNICAST_HOPS, [5], 4) = 0 connect(3, {sa_family=AF_INET6, sin6_port=htons(8787), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "2002:a05:6608:297::", &sin6_addr), sin6_scope_id=0}, 28) = -1 EHOSTUNREACH (No route to host) recvmsg(3, {msg_name={sa_family=AF_INET6, sin6_port=htons(8787), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "2002:a05:6608:297::", &sin6_addr), sin6_scope_id=0}, msg_namelen=1024->28, msg_iov=[{iov_base="`\r\337\320\0004\6\1&\7\370\260\200\231\16\27\0\0\0\0\0\0\0\0 \2\n\5f\10\2\227"..., iov_len=1024}], msg_iovlen=1, msg_control=[{cmsg_len=32, cmsg_level=SOL_SOCKET, cmsg_type=SO_TIMESTAMP_OLD, cmsg_data={tv_sec=1590340680, tv_usec=272424}}, {cmsg_len=60, cmsg_level=SOL_IPV6, cmsg_type=IPV6_RECVERR}], msg_controllen=96, msg_flags=MSG_ERRQUEUE}, MSG_ERRQUEUE) = 144 Suggested-by: Maciej Żenczykowski <maze@google.com Signed-off-by:Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
Eric Dumazet authored
bnx2x_warpcore_read_sfp_module_eeprom() can call bnx2x_bsc_read() three times before giving up. This causes latency blips of at least 31 ms (58 ms being reported by our teams) Convert the long lasting loops of udelay() to usleep_range() ones, and breaks the loops on precise time tracking. Signed-off-by:
-
Dan Carpenter authored
The value of "n" is capped at 0x1ffffff but it checked for negative values. I don't think this causes a problem but I'm not certain and it's harmless to prevent it. Fixes: 2e041728 ("ipv4: do compat setsockopt for MCAST_MSFILTER directly") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Sven Auhagen authored
For XDP the MVNETA_SKB_HEADROOM is used as an offset for the received data. The MVNETA manual states that the last 3 bits assumed to be 0. This is currently the case but lets make it explicit in the definition to prevent future problems. Signed-off-by:
Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by:
-
- 25 May, 2020 13 commits
-
-
Ido Schimmel authored
vxlan_fdb_info() is not always called with RTNL held or from an RCU read-side critical section. For example, in the following call path: vxlan_cleanup() vxlan_fdb_destroy() vxlan_fdb_notify() __vxlan_fdb_notify() vxlan_fdb_info() The use of rtnl_dereference() can therefore result in the following splat [1]. Fix this by dereferencing the nexthop under RCU read-side critical section. [1] [May24 22:56] ============================= [ +0.004676] WARNING: suspicious RCU usage [ +0.004614] 5.7.0-rc5-custom-16219-g201392003491 #2772 Not tainted [ +0.007116] ----------------------------- [ +0.004657] drivers/net/vxlan.c:276 suspicious rcu_dereference_check() usage! [ +0.008164] other info that might help us debug this: [ +0.009126] rcu_scheduler_active = 2, debug_locks = 1 [ +0.007504] 5 locks held by bash/6892: [ +0.004392] #0: ffff8881d47e3410 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: __do_execve_file.isra.27+0x392/0x23c0 [ +0.011795] #1: ffff8881d47e34b0 (&sig->exec_update_mutex){+.+.}-{3:3}, at: flush_old_exec+0x510/0x2030 [ +0.010947] #2: ffff8881a141b0b0 (ptlock_ptr(page)#2){+.+.}-{2:2}, at: unmap_page_range+0x9c0/0x2590 [ +0.010585] #3: ffff888230009d50 ((&vxlan->age_timer)){+.-.}-{0:0}, at: call_timer_fn+0xe8/0x800 [ +0.010192] #4: ffff888183729bc8 (&vxlan->hash_lock[h]){+.-.}-{2:2}, at: vxlan_cleanup+0x133/0x4a0 [ +0.010382] stack backtrace: [ +0.005103] CPU: 1 PID: 6892 Comm: bash Not tainted 5.7.0-rc5-custom-16219-g201392003491 #2772 [ +0.009675] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ +0.010155] Call Trace: [ +0.002775] <IRQ> [ +0.002313] dump_stack+0xfd/0x178 [ +0.003895] lockdep_rcu_suspicious+0x14a/0x153 [ +0.005157] vxlan_fdb_info+0xe39/0x12a0 [ +0.004775] __vxlan_fdb_notify+0xb8/0x160 [ +0.004672] vxlan_fdb_notify+0x8e/0xe0 [ +0.004370] vxlan_fdb_destroy+0x117/0x330 [ +0.004662] vxlan_cleanup+0x1aa/0x4a0 [ +0.004329] call_timer_fn+0x1c4/0x800 [ +0.004357] run_timer_softirq+0x129d/0x17e0 [ +0.004762] __do_softirq+0x24c/0xaef [ +0.004232] irq_exit+0x167/0x190 [ +0.003767] smp_apic_timer_interrupt+0x1dd/0x6a0 [ +0.005340] apic_timer_interrupt+0xf/0x20 [ +0.004620] </IRQ> Fixes: 1274e1cc ("vxlan: ecmp support for mac fdb entries") Signed-off-by:Ido Schimmel <idosch@mellanox.com> Reported-by:
Amit Cohen <amitc@mellanox.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Various trap changes - part 1 This patch set contains various changes in mlxsw trap configuration. Another set will perform similar changes before exposing control traps (e.g., IGMP query, ARP request) via devlink-trap. Tested with existing devlink-trap selftests. Please see individual patches for a detailed changelog. ==================== Signed-off-by: -
Ido Schimmel authored
Fix incorrect spelling of "advertisement". Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
The rate with which packets are sampled is determined by user space, so there is no need to associate such packets with a policer. Signed-off-by:
-
Ido Schimmel authored
Both packet types are needed for the same reason (neighbour discovery), so associate them with the same trap group. Signed-off-by:
-
Ido Schimmel authored
The ARP trap group will be used for IPv6 ND traps in the next patch, so rename it to "NEIGH_DISCOVERY" which is more appropriate. Signed-off-by:
-
Ido Schimmel authored
Now that traffic class (TC) and priority are set to the same value, there is no need to store both. Remove the first. Signed-off-by:
-
Ido Schimmel authored
The traffic class (TC) attribute of packet traps determines through which TC a packet trap will be scheduled through the CPU port. The priority attribute determines which trap will be triggered in case several packet traps match a packet. We try to configure these attributes to the same value for all packet traps as there is little reason not to. Some packet traps did not use the same value, so rectify that now. Signed-off-by:
-
Ido Schimmel authored
As explained in commit 9ffcc372 ("mlxsw: spectrum: Allow packets to be trapped from any PG"), incoming packets can be admitted to the shared buffer and forwarded / trapped, if: (Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres && Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres) || (Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min || Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min) Trapped packets are scheduled to transmission through the CPU port. Currently, the minimum and maximum quotas of traffic class (TC) 0 of the CPU port are 0, which means it is not usable. Assign non-zero quotas to TC 0 of the CPU port, so that it could be utilized by subsequent patches. Signed-off-by:
-
Ido Schimmel authored
Reduce the default acceptable rate of DHCP packets to 128 packets per second and reduce their priority. This is reasonable given the Spectrum ASICs are limited to 128 ports at the moment. These are only the default values. Users will be able to modify them via devlink-trap. Signed-off-by:
-
Ido Schimmel authored
Currently, IPv4 DHCP packets are trapped during L2 forwarding, which means that packets might be trapped unnecessarily. Instead, only trap the DHCP packets that reach the router. Either because they were flooded to the router port or forwarded to it by the FDB. This is consistent with the corresponding IPv6 trap. Signed-off-by:
-
Ido Schimmel authored
Both packet types are needed for the same reason (multicast snooping), so associate them with the same trap group. Signed-off-by:
-
Ido Schimmel authored
The IGMP trap group will be used for MLD traps in the next patch, so rename it to "MC_SNOOPING" which is more appropriate. Signed-off-by:
-
- 24 May, 2020 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
The MSCC bug fix in 'net' had to be slightly adjusted because the register accesses are done slightly differently in net-next. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: "A set of EFI fixes: - Don't return a garbage screen info when EFI framebuffer is not available - Make the early EFI console work properly with wider fonts instead of drawing garbage - Prevent a memory buffer leak in allocate_e820() - Print the firmware error record properly so it can be decoded by users - Fix a symbol clash in the host tool build which only happens with newer compilers. - Add a missing check for the event log version of TPM which caused boot failures on several Dell systems due to an attempt to decode SHA-1 format with the crypto agile algorithm" * tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tpm: check event log version before reading final events efi: Pull up arch-specific prototype efi_systab_show_arch() x86/boot: Mark global variables as static efi: cper: Add support for printing Firmware Error Record Reference efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820() efi/earlycon: Fix early printk for wider fonts efi/libstub: Avoid returning uninitialized data from setup_graphics() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Unbreak stack dumps for inactive tasks by interpreting the special first frame left by __switch_to_asm() correctly. The recent change not to skip the first frame so ORC and frame unwinder behave in the same way caused all entries to be unreliable, i.e. prepended with '?'. - Use cpumask_available() instead of an implicit NULL check of a cpumask_var_t in mmio trace to prevent a Clang build warning" * tag 'x86-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of fixes for the scheduler: - Fix handling of throttled parents in enqueue_task_fair() completely. The recent fix overlooked a corner case where the first iteration terminates due to an entity already being on the runqueue which makes the list management incomplete and later triggers the assertion which checks for completeness. - Fix a similar problem in unthrottle_cfs_rq(). - Show the correct uclamp values in procfs which prints the effective value twice instead of requested and effective" * tag 'sched-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list sched/debug: Fix requested task uclamp values shown in procfs sched/fair: Fix enqueue_task_fair() warning some more -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna Bhowmik. 2) Nexthop attributes aren't being checked properly because of mis-initialized iterator, from David Ahern. 3) Revert iop_idents_reserve() change as it caused performance regressions and was just working around what is really a UBSAN bug in the compiler. From Yuqi Jin. 4) Read MAC address properly from ROM in bmac driver (double iteration proceeds past end of address array), from Jeremy Kerr. 5) Add Microsoft Surface device IDs to r8152, from Marc Payne. 6) Prevent reference to freed SKB in __netif_receive_skb_core(), from Boris Sukholitko. 7) Fix ACK discard behavior in rxrpc, from David Howells. 8) Preserve flow hash across packet scrubbing in wireguard, from Jason A. Donenfeld. 9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric Dumazet. 10) Fix encryption error checking in kTLS code, from Vadim Fedorenko. 11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki. 12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet. 13) Fix use after free in mlxsw driver, from Jiri Pirko. 14) Order kTLS key destruction properly in mlx5 driver, from Tariq Toukan. 15) Check devm_platform_ioremap_resource() return value properly in several drivers, from Tiezhu Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits) net: smsc911x: Fix runtime PM imbalance on error net/mlx4_core: fix a memory leak bug. net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend net: phy: mscc: fix initialization of the MACsec protocol mode net: stmmac: don't attach interface until resume finishes net: Fix return value about devm_platform_ioremap_resource() net/mlx5: Fix error flow in case of function_setup failure net/mlx5e: CT: Correctly get flow rule net/mlx5e: Update netdev txq on completions during closure net/mlx5: Annotate mutex destroy for root ns net/mlx5: Don't maintain a case of del_sw_func being null net/mlx5: Fix cleaning unmanaged flow tables net/mlx5: Fix memory leak in mlx5_events_init net/mlx5e: Fix inner tirs handling net/mlx5e: kTLS, Destroy key object after destroying the TIS net/mlx5e: Fix allowed tc redirect merged eswitch offload cases net/mlx5: Avoid processing commands before cmdif is ready net/mlx5: Fix a race when moving command interface to events mode net/mlx5: Add command entry handling completion rxrpc: Fix a memory leak in rxkad_verify_response() ...
-
- 23 May, 2020 7 commits
-
-
Heiner Kallweit authored
get_coalesce returns 0 or ERRNO, but the return value isn't checked. The returned coalesce data may be invalid if an ERRNO is set, therefore better check and propagate the return value. Signed-off-by:
-
David S. Miller authored
Bartosz Golaszewski says: ==================== net: provide a devres variant of register_netdev() Using devres helpers allows to shrink the probing code, avoid memory leaks in error paths make sure the order in which resources are freed is the exact opposite of their allocation. This series proposes to add a devres variant of register_netdev() that will only work with net_device structures whose memory is also managed. First we add the missing documentation entry for the only other networking devres helper: devm_alloc_etherdev(). Next we move devm_alloc_etherdev() into a separate source file. We then use a proxy structure in devm_alloc_etherdev() to improve readability. Last: we implement devm_register_netdev() and use it in mtk-eth-mac driver. v1 -> v2: - rebase on top of net-next after driver rename, no functional changes ==================== Signed-off-by: -
Bartosz Golaszewski authored
Use the new devres variant of register_netdev() in the mtk-star-emac driver and shrink the code by a couple lines. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Bartosz Golaszewski authored
Provide devm_register_netdev() - a device resource managed variant of register_netdev(). This new helper will only work for net_device structs that are also already managed by devres. Signed-off-by:
-
Bartosz Golaszewski authored
Not using a proxy structure to store struct net_device doesn't save anything in terms of compiled code size or memory usage but significantly decreases the readability of the code with all the pointer casting. Define struct net_device_devres and use it in devm_alloc_etherdev_mqs(). Signed-off-by:
-
Bartosz Golaszewski authored
There's currently only a single devres helper in net/ - devm variant of alloc_etherdev. Let's move it to net/devres.c with the intention of assing a second one: devm_register_netdev(). This new routine will need to know the address of the release function of devm_alloc_etherdev() so that it can verify (using devres_find()) that the struct net_device that's being passed to it is also resource managed. Signed-off-by:
-
Bartosz Golaszewski authored
Add a new section for networking devres helpers to devres.rst and list the two existing devm functions. Signed-off-by:
-
