apache_frontend =============== Frontend system using Apache, allowing to rewrite and proxy URLs like myinstance.myfrontenddomainname.com to real IP/URL of myinstance. apache_frontend works using the master instance / slave instance design. It means that a single main instance of Apache will be used to act as frontend for many slaves. Software type ============= Apache frontend is available in 3 software types: * default : The standard way to use the apache frontend configuring everything with a few given parameters * custom-personal : This software type allow each slave to edit its apache configuration file About frontend replication =========================== Slaves of the root instance are sent as a parameter to requested frontends which will process them. The only difference is that they will then return the « would-be published information » to the root instance instead of publishing it. The root instance will then do a synthesis and publish the information to its slaves. The replicate instance only use 5 type of parameters for itself and will transmit the rest to requested frontends. These parameters are : * "-frontend-type" : the type to deploy frontends with. (default to 2) * "-frontend-quantity" : The quantity of frontends to request (default to "default") * "-frontend-i-state": The state of frontend i * "-frontend-config-i-foo": Frontend i will be requested with parameter foo * "-frontend-software-release-url": Software release to be used for frontends, default to the current software release * "-sla-i-foo" : where "i" is the number of the concerned frontend (between 1 and "-frontend-quantity") and "foo" a sla parameter. ex: 3 custom-personal stopped COMP-1234 http://git.erp5.org/gitweb/slapos.git/blob_plain/refs/tags/slapos-0.183:/software/apache-frontend/software.cfg will request the third frontend on COMP-1234. All frontends will be of software type "custom-personal". The second frontend will be requested with the state stopped Note: the way slaves are transformed to a parameter avoid modifying more than 3 lines in the frontend logic. Important NOTE: The way you ask for slave to a replicate frontend is the same as the one you would use for the software given in "-frontend-quantity". Do not forget to use "replicate" for software type. XXXXX So far it is not possible to do a simple request on a replicate frontend if you do not know the software_guid or other sla-parameter of the master instance. In fact we do not know yet the software type of the "requested" frontends. TO BE IMPLEMENTED XXX Should be moved to specific JSON File Extra-parameter per frontend with default : ram-cache-size = 1G disk-cache-size = 8G How to deploy a frontend server =============================== This is to deploy an entire frontend server with a public IPv4. If you want to use an already deployed frontend to make your service available via ipv4, switch to the "Example" parts. First, you will need to request a "master" instance of Apache Frontend with: * A "domain" parameter where the frontend will be available * A "public-ipv4" parameter to state which public IPv4 will be used like:: moulefrite.org xxx.xxx.xxx.xxx Then, it is possible to request many slave instances (currently only from slapconsole, UI doesn't work yet) of Apache Frontend, like:: instance = request( software_release=apache_frontend, partition_reference='frontend2', shared=True, partition_parameter_kw={"url":"https://[1:2:3:4]:1234/someresource"} ) Those slave instances will be redirected to the "master" instance, and you will see on the "master" instance the associated RewriteRules of all slave instances. Finally, the slave instance will be accessible from: https://someidentifier.moulefrite.org. About SSL ========= Default and custom-personal software type can handle specific ssl for one slave instance. IMPORTANT: One apache can not serve more than One specific SSL VirtualHost and be compatible with obsolete browser (i.e.: IE8). See http://wiki.apache.org/httpd/NameBasedSSLVHostsWithSNI #How to have custom configuration in frontend server #=================================================== # #In your instance directory, you, as sysadmin, can directly edit two #configuration files that won't be overwritten by SlapOS to customize your #instance: # # * $PARTITION_PATH/srv/srv/apache-conf.d/apache_frontend.custom.conf # * $PARTITION_PATH/srv/srv/apache-conf.d/apache_frontend.virtualhost.custom.conf # #The first one is included in the end of the main apache configuration file. #The second one is included in the virtualhost of the main apache configuration file. # #SlapOS will jsut create those two files for you, then completely forget them. # #Note: make sure that the UNIX user of the instance has read access to those #files if you edit them. Instance Parameters =================== Master Instance Parameters -------------------------- The parameters for instances are described at `instance-apache-input-schema.json `_. Here some additional informations about the parameters listed, below: domain ~~~~~~ name of the domain to be used (example: mydomain.com). Subdomains of this domain will be used for the slave instances (example: instance12345.mydomain.com). It is then recommended to add a wildcard in DNS for the subdomains of the chosen domain like:: *.mydomain.com. IN A 123.123.123.123 Using the IP given by the Master Instance. "domain" is a mandatory Parameter. public-ipv4 ~~~~~~~~~~~ Public ipv4 of the frontend (the one Apache will be indirectly listening to) port ~~~~ Port used by Apache. Optional parameter, defaults to 4443. plain_http_port ~~~~~~~~~~~~~~~ Port used by apache to serve plain http (only used to redirect to https). Optional parameter, defaults to 8080. Slave Instance Parameters ------------------------- The parameters for instances are described at `instance-slave-apache-input-schema.json `_. Here some additional informations about the parameters listed, below: path ~~~~ Only used if type is "zope". Will append the specified path to the "VirtualHostRoot" of the zope's VirtualHostMonster. "path" is an optional parameter, ignored if not specified. Example of value: "/erp5/web_site_module/hosting/" apache_custom_https ~~~~~~~~~~~~~~~~~~~ Raw apache configuration in python template format (i.e. write "%%" for one "%") for the slave listening to the https port. Its content will be templatified in order to access functionalities such as cache access, ssl certificates... The list is available above. NOTE: If you want to use the cache, use the apache option "ProxyPreserveHost On" apache_custom_http ~~~~~~~~~~~~~~~~~~ Raw apache configuration in python template format (i.e. write "%%" for one "%") for the slave listening to the http port. Its content will be templatified in order to access functionalities such as cache access, ssl certificates... The list is available above NOTE: If you want to use the cache, use the apache option "ProxyPreserveHost On" url ~~~ Necesarry to activate cache. url of backend to use. "url" is an optional parameter. Example: http://mybackend.com/myresource domain ~~~~~~ Necesarry to activate cache. The frontend will be accessible from this domain. "domain" is an optional parameter. Example: www.mycustomdomain.com enable_cache ~~~~~~~~~~~~ Necesarry to activate cache. "enable_cache" is an optional parameter. ssl_key, ssl_crt, ssl_ca_crt ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SSL certificates of the slave. They are optional. Functionalities for apache configuration: In the slave apache configuration you can use parameters that will be replaced during instanciation. They should be entered as python templates parameters ex:" %(parameter)s" * cache_access : url of the cache. Should replace backend url in configuration to use the cache * error_log : path of the slave error log in order to log in a deferenciated file. * error_log : path of the slave access log in order to log in a deferenciated file. * ssl_key, ssl_crt, ssl_ca_crt, ssl_crs : path of the certificates given in slave instance parameters Examples ======== Here are some example of how to make your SlapOS service available through an already deployed frontend. Simple Example (default) ------------------------ Request slave frontend instance so that https://[1:2:3:4:5:6:7:8]:1234 will be redirected and accessible from the proxy:: instance = request( software_release=apache_frontend, software_type="RootSoftwareInstance", partition_reference='my frontend', shared=True, partition_parameter_kw={ "url":"https://[1:2:3:4:5:6:7:8]:1234", } ) Zope Example (default) ---------------------- Request slave frontend instance using a Zope backend so that https://[1:2:3:4:5:6:7:8]:1234 will be redirected and accessible from the proxy:: instance = request( software_release=apache_frontend, software_type="RootSoftwareInstance", partition_reference='my frontend', shared=True, partition_parameter_kw={ "url":"https://[1:2:3:4:5:6:7:8]:1234", "type":"zope", } ) Advanced example ----------------- Request slave frontend instance using a Zope backend, with Varnish activated, listening to a custom domain and redirecting to /erp5/ so that https://[1:2:3:4:5:6:7:8]:1234/erp5/ will be redirected and accessible from the proxy:: instance = request( software_release=apache_frontend, software_type="RootSoftwareInstance", partition_reference='my frontend', shared=True, partition_parameter_kw={ "url":"https://[1:2:3:4:5:6:7:8]:1234", "enable_cache":"true", "type":"zope", "path":"/erp5", "domain":"mycustomdomain.com", } ) Simple Example --------------- Request slave frontend instance so that https://[1:2:3:4:5:6:7:8]:1234 will be instance = request( software_release=apache_frontend, software_type="RootSoftwareInstance", partition_reference='my frontend', shared=True, software_type="custom-personal", partition_parameter_kw={ "url":"https://[1:2:3:4:5:6:7:8]:1234", "apache_custom_https":' ServerName www.example.org ServerAlias example.org ServerAdmin geronimo@example.org SSLEngine on SSLProxyEngine on # Rewrite part ProxyVia On ProxyPreserveHost On ProxyTimeout 600 RewriteEngine On RewriteRule ^/(.*) https://[1:2:3:4:5:6:7:8]:1234/$1 [L,P]', "apache_custom_http":' ServerName www.example.org ServerAlias www.example.org ServerAlias example.org ServerAdmin geronimo@example.org SSLProxyEngine on # Rewrite part ProxyVia On ProxyPreserveHost On ProxyTimeout 600 RewriteEngine On # Remove "Secure" from cookies, as backend may be https Header edit Set-Cookie "(?i)^(.+);secure$" "$1" # Not using HTTPS? Ask that guy over there. # Dummy redirection to https. Note: will work only if https listens # on standard port (443). RewriteRule ^/(.*) https://[1:2:3:4:5:6:7:8]:1234/$1 [L,P], } ) Simple Cache Example -------------------- Request slave frontend instance so that https://[1:2:3:4:5:6:7:8]:1234 will be instance = request( software_release=apache_frontend, software_type="RootSoftwareInstance", partition_reference='my frontend', shared=True, software_type="custom-personal", partition_parameter_kw={ "url":"https://[1:2:3:4:5:6:7:8]:1234", "domain": "www.example.org", "enable_cache": "True", "apache_custom_https":' ServerName www.example.org ServerAlias www.example.org ServerAlias example.org ServerAdmin geronimo@example.org SSLEngine on SSLProxyEngine on # Rewrite part ProxyVia On ProxyPreserveHost On ProxyTimeout 600 RewriteEngine On RewriteRule ^/(.*) %(cache_access)s/$1 [L,P]', "apache_custom_http":' ServerName www.example.org ServerAlias www.example.org ServerAlias example.org ServerAdmin geronimo@example.org SSLProxyEngine on # Rewrite part ProxyVia On ProxyPreserveHost On ProxyTimeout 600 RewriteEngine On # Remove "Secure" from cookies, as backend may be https Header edit Set-Cookie "(?i)^(.+);secure$" "$1" # Not using HTTPS? Ask that guy over there. # Dummy redirection to https. Note: will work only if https listens # on standard port (443). RewriteRule ^/(.*) %(cache_access)s/$1 [L,P], } ) Advanced example ----------------- Request slave frontend instance using custom apache configuration, willing to use cache and ssl certificates. listening to a custom domain and redirecting to /erp5/ so that https://[1:2:3:4:5:6:7:8]:1234/erp5/ will be redirected and accessible from the proxy:: instance = request( software_release=apache_frontend, software_type="RootSoftwareInstance", partition_reference='my frontend', shared=True, software_type="custom-personal", partition_parameter_kw={ "url":"https://[1:2:3:4:5:6:7:8]:1234", "enable_cache":"true", "type":"zope", "path":"/erp5", "domain":"example.org", "apache_custom_https":' ServerName www.example.org ServerAlias www.example.org ServerAdmin example.org SSLEngine on SSLProxyEngine on SSLProtocol all -SSLv2 -SSLv3 SSLCipherSuite ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:HIGH:!aNULL:!MD5 SSLHonorCipherOrder on # Use personal ssl certificates SSLCertificateFile %(ssl_crt)s SSLCertificateKeyFile %(ssl_key)s SSLCACertificateFile %(ssl_ca_crt)s SSLCertificateChainFile %(ssl_ca_crt)s # Configure personal logs ErrorLog "%(error_log)s" LogLevel info LogFormat "%%h %%l %%{REMOTE_USER}i %%t \"%%r\" %%>s %%b \"%%{Referer}i\" \"%%{User-Agent}i\" %%D" combined CustomLog "%(access_log)s" combined # Rewrite part ProxyVia On ProxyPreserveHost On ProxyTimeout 600 RewriteEngine On # Redirect / to /index.html RewriteRule ^/$ /index.html [R=302,L] # Use cache RewriteRule ^/(.*) %(cache_access)s/VirtualHostBase/https/www.example.org:443/erp5/VirtualHostRoot/$1 [L,P]', "apache_custom_http":' ServerName www.example.org ServerAlias www.example.org ServerAlias example.org ServerAdmin geronimo@example.org SSLProxyEngine on # Rewrite part ProxyVia On ProxyPreserveHost On ProxyTimeout 600 RewriteEngine On # Configure personal logs ErrorLog "%(error_log)s" LogLevel info LogFormat "%%h %%l %%{REMOTE_USER}i %%t \"%%r\" %%>s %%b \"%%{Referer}i\" \"%%{User-Agent}i\" %%D" combined CustomLog "%(access_log)s" combined # Remove "Secure" from cookies, as backend may be https Header edit Set-Cookie "(?i)^(.+);secure$" "$1" # Not using HTTPS? Ask that guy over there. # Dummy redirection to https. Note: will work only if https listens # on standard port (443). RewriteRule ^/(.*)$ https://%%{SERVER_NAME}%%{REQUEST_URI}', "ssl_key":"-----BEGIN RSA PRIVATE KEY----- XXXXXXX..........XXXXXXXXXXXXXXX -----END RSA PRIVATE KEY-----", "ssl_crt":'-----BEGIN CERTIFICATE----- XXXXXXXXXXX.............XXXXXXXXXXXXXXXXXXX -----END CERTIFICATE-----', "ssl_ca_crt":'-----BEGIN CERTIFICATE----- XXXXXXXXX...........XXXXXXXXXXXXXXXXX -----END CERTIFICATE-----', "ssl_csr":'-----BEGIN CERTIFICATE REQUEST----- XXXXXXXXXXXXXXX.............XXXXXXXXXXXXXXXXXX -----END CERTIFICATE REQUEST-----', } ) Notes ===== It is not possible with slapos to listen to port <= 1024, because process are not run as root. Solution 1 (IPv4 only) ---------------------- It is a good idea then to go on the node where the instance is and set some iptables rules like (if using default ports):: iptables -t nat -A PREROUTING -p tcp -d {public_ipv4} --dport 443 -j DNAT --to-destination {listening_ipv4}:4443 iptables -t nat -A PREROUTING -p tcp -d {public_ipv4} --dport 80 -j DNAT --to-destination {listening_ipv4}:8080 Where {public ip} is the public IP of your server, or at least the LAN IP to where your NAT will forward to. {listening ip} is the private ipv4 (like 10.0.34.123) that the instance is using and sending as connection parameter. Solution 2 (IPv6 only) ---------------------- It is also possible to directly allow the service to listen on 80 and 443 ports using the following command: setcap 'cap_net_bind_service=+ep' /opt/slapgrid/$APACHE_FRONTEND_SOFTWARE_RELEASE_MD5/parts/apache/bin/httpd Then specify in the instance parameters "port" and "plain_http_port" to be 443 and 80, respectively.