Redeploy Openstack Controller Grizzly with quantum

software/openstack/instance-main.cfg

@@ -111,16 +111,19 @@ shell-path = ${dash:location}/bin/dash
 
 [install-script]
 recipe = slapos.recipe.template
-url = ${openstack-install:location}/${openstack-install:filename}
-output = $${directory:nova}/openstack_install.sh
+url = ${openstack-grizzly:location}/${openstack-grizzly:filename}
+output = $${directory:nova}/stack_controller_grizzly.sh
 mode = 0700
 
-nova-url = https://github.com/openstack-dev/devstack.git
+#nova-url = https://github.com/openstack-dev/devstack.git
+image-url = $${slap-parameter:glance-image-url}
+image-name = $${slap-parameter:glance-image-name}
 slap-ipv4 = $${slap-network-information:local-ipv4}
 nova-passwd = $${master-passwd:passwd}
 nova-user = $${slap-parameter:system-user}
 vnc-url = $${request-openstack-vnc-frontend:connection-url}
-devstack-revision = $${slap-parameter:devstack-revision}
+project = $${slap-parameter:project}
+user-name = $${slap-parameter:user-name}
 
 [nova-conf-run]
 recipe = slapos.recipe.template
@@ -133,6 +136,9 @@ ssh-port = $${tunnel-ipv6-ssh:ipv6-port}
 system-user = $${slap-parameter:system-user}
 system-passwd = $${slap-parameter:system-passwd}
 nova-configure = $${install-script:output}
+keystone-endpoints-script = ${openstack-keystone-endpoints-script:location}/${openstack-keystone-endpoints-script:filename}
+keystone-script = ${openstack-keystone-script:location}/${openstack-keystone-script:filename}
+floating-ip-generate = ${network-floating-ip-generate:location}/${network-floating-ip-generate:filename}
 nova-result = $${directory:log}
 python_path = ${buildout:executable}
 eggs-dir = ${buildout:eggs-directory}
@@ -315,10 +321,14 @@ nbd2-host =
   
 system-user = stack
 system-passwd = openstack
+project = slapos
+user-name = slapos
+glance-image-url = http://download.cirros-cloud.net/0.3.1/cirros-0.3.1-x86_64-disk.img
+glance-image-name = cirros-0.3.1-x86_64
 
 domain =
 virtual-hard-drive-url =
 virtual-hard-drive-md5sum =
 
 #Using devstack to auto install openstack. We just specify here the commit to use
-devstack-revision = 0b29d86930fb9ba00dbb8e593b0a9fcee3559810
+#devstack-revision = 
\ No newline at end of file

software/openstack/software.cfg

@@ -35,7 +35,7 @@ eggs =
 [template-openstack-main]
 recipe = slapos.recipe.template
 url = ${:_profile_base_location_}/instance-main.cfg
-md5sum = 96147d4052fac19fe9a6a72ecc1233ad
+md5sum = bf86f17749961de846ef191bf96c8ad1
 output = ${buildout:directory}/template-openstack-main.cfg
 mode = 0644
 
@@ -67,12 +67,32 @@ md5sum = 136339c0d704bb11af3839726e24c47f
 [compute-script-run]
 <= template-download
 filename = ssh-configure.py.in
-md5sum = e10b3796e028b65465a05b6a0c6f9762
+md5sum = 2a4f82db89a01ed0866682a30bce185b
+
+[network-floating-ip-generate]
+<= template-download
+filename = network.py
+#md5sum = 
 
 [openstack-install]
 <= template-download
 filename = openstack-install.sh.in
-md5sum = 1094a575e8bf577b1ed5f2ab91556b1b
+md5sum = 5cd174f8e94f5d975d7940ac65d8e9f4
+
+[openstack-grizzly]
+<= template-download
+filename = stack_controller_grizzly.sh.in
+#md5sum = 
+
+[openstack-keystone-script]
+<= template-download
+filename = keystone_basic.sh
+#md5sum = 
+
+[openstack-keystone-endpoints-script]
+<= template-download
+filename = keystone_endpoints_basic.sh
+#md5sum = 
 
 [slapos.cookbook-repository]
 recipe = slapos.recipe.build:gitclone
@@ -137,39 +157,44 @@ signature-certificate-list =
 Jinja2 = 2.7.1
 MarkupSafe = 0.18
 Werkzeug = 0.9.4
-apache-libcloud = 0.13.1
+apache-libcloud = 0.13.2
 async = 0.6.1
 buildout-versions = 1.7
 gitdb = 0.5.4
 itsdangerous = 0.23
 lxml = 3.2.3
 meld3 = 0.6.10
-paramiko = 1.11.0
+paramiko = 1.12.0
+plone.recipe.command = 1.1
 pycrypto = 2.6
 slapos.recipe.build = 0.12
 slapos.recipe.cmmi = 0.2
 slapos.recipe.download = 1.0.dev-r4053
 slapos.recipe.template = 2.5
-slapos.toolbox = 0.36
+slapos.toolbox = 0.37
 smmap = 0.8.2
 websockify = 0.5.1
 z3c.recipe.scripts = 1.0.1
 
 # Required by:
 # slapos.core==0.35.1
-# slapos.toolbox==0.36
+# slapos.toolbox==0.37
 Flask = 0.10.1
 
 # Required by:
-# slapos.toolbox==0.36
+# slapos.toolbox==0.37
 GitPython = 0.3.2.RC1
 
 # Required by:
-# slapos.toolbox==0.36
+# slapos.toolbox==0.37
 atomize = 0.1.1
 
 # Required by:
-# slapos.toolbox==0.36
+# paramiko==1.12.0
+ecdsa = 0.9
+
+# Required by:
+# slapos.toolbox==0.37
 feedparser = 5.1.3
 
 # Required by:
@@ -193,8 +218,8 @@ netifaces = 0.8-1
 numpy = 1.7.1
 
 # Required by:
-# slapos.toolbox==0.36
-psutil = 1.0.1
+# slapos.toolbox==0.37
+psutil = 1.1.0
 
 # Required by:
 # slapos.core==0.35.1
@@ -202,11 +227,11 @@ pyflakes = 0.7.3
 
 # Required by:
 # slapos.cookbook==0.83.1
-pytz = 2013d
+pytz = 2013.7
 
 # Required by:
 # slapos.cookbook==0.83.1
-# slapos.toolbox==0.36
+# slapos.toolbox==0.37
 slapos.core = 0.35.1
 
 # Required by:
@@ -219,9 +244,13 @@ unittest2 = 0.5.1
 
 # Required by:
 # slapos.cookbook==0.83.1
-# slapos.toolbox==0.36
+# slapos.toolbox==0.37
 xml-marshaller = 0.9.7
 
 # Required by:
 # slapos.core==0.35.1
 zope.interface = 4.0.5
+cliff = 1.4.5
+cmd2 = 0.6.7
+pyparsing = 2.0.1
+requests = 2.0.0
\ No newline at end of file

software/openstack/templates/keystone_basic.sh

+#!/bin/bash -xe
+#
+# Keystone basic configuration 
+
+# Mainly inspired by https://github.com/openstack/keystone/blob/master/tools/sample_data.sh
+
+# Modified by Bilel Msekni / Institut Telecom
+#
+# Modified by Alain Takoudjou Kamdem
+#
+# Support: openstack@lists.launchpad.net
+# License: Apache Software License (ASL) 2.0
+#
+source localrc
+
+
+HOST_IP=${HOST_IP:-10.10.100.51}
+ADMIN_PASSWORD=${ADMIN_PASSWORD:-openstack}
+SERVICE_PASSWORD=${SERVICE_PASSWORD:-openstack}
+export SERVICE_TOKEN="ADMIN"
+export SERVICE_ENDPOINT="http://${HOST_IP}:35357/v2.0"
+SERVICE_TENANT_NAME=${SERVICE_TENANT_NAME:-service}
+
+get_id () {
+    echo `$@ | awk '/ id / { print $4 }'`
+}
+
+# Tenants
+ADMIN_TENANT=$(get_id keystone tenant-create --name=admin)
+SERVICE_TENANT=$(get_id keystone tenant-create --name=$SERVICE_TENANT_NAME)
+
+
+# Users
+ADMIN_USER=$(get_id keystone user-create --name=admin --pass="$ADMIN_PASSWORD" --email=admin@domain.com)
+
+
+# Roles
+ADMIN_ROLE=$(get_id keystone role-create --name=admin)
+KEYSTONEADMIN_ROLE=$(get_id keystone role-create --name=KeystoneAdmin)
+KEYSTONESERVICE_ROLE=$(get_id keystone role-create --name=KeystoneServiceAdmin)
+
+# Add Roles to Users in Tenants
+keystone user-role-add --user-id $ADMIN_USER --role-id $ADMIN_ROLE --tenant-id $ADMIN_TENANT
+keystone user-role-add --user-id $ADMIN_USER --role-id $KEYSTONEADMIN_ROLE --tenant-id $ADMIN_TENANT
+keystone user-role-add --user-id $ADMIN_USER --role-id $KEYSTONESERVICE_ROLE --tenant-id $ADMIN_TENANT
+
+# The Member role is used by Horizon and Swift
+MEMBER_ROLE=$(get_id keystone role-create --name=Member)
+
+# Configure service users/roles
+NOVA_USER=$(get_id keystone user-create --name=nova --pass="$SERVICE_PASSWORD" --tenant-id $SERVICE_TENANT --email=nova@domain.com)
+keystone user-role-add --tenant-id $SERVICE_TENANT --user-id $NOVA_USER --role-id $ADMIN_ROLE
+
+GLANCE_USER=$(get_id keystone user-create --name=glance --pass="$SERVICE_PASSWORD" --tenant-id $SERVICE_TENANT --email=glance@domain.com)
+keystone user-role-add --tenant-id $SERVICE_TENANT --user-id $GLANCE_USER --role-id $ADMIN_ROLE
+
+QUANTUM_USER=$(get_id keystone user-create --name=quantum --pass="$SERVICE_PASSWORD" --tenant-id $SERVICE_TENANT --email=quantum@domain.com)
+keystone user-role-add --tenant-id $SERVICE_TENANT --user-id $QUANTUM_USER --role-id $ADMIN_ROLE
+
+CINDER_USER=$(get_id keystone user-create --name=cinder --pass="$SERVICE_PASSWORD" --tenant-id $SERVICE_TENANT --email=cinder@domain.com)
+keystone user-role-add --tenant-id $SERVICE_TENANT --user-id $CINDER_USER --role-id $ADMIN_ROLE

software/openstack/templates/keystone_endpoints_basic.sh

+#!/bin/bash -xe
+#
+# Keystone basic Endpoints
+
+# Mainly inspired by https://github.com/openstack/keystone/blob/master/tools/sample_data.sh
+
+# Modified by Bilel Msekni / Institut Telecom
+#
+# Modified by Alain Takoudjou Kamdem
+#
+# Support: openstack@lists.launchpad.net
+# License: Apache Software License (ASL) 2.0
+#
+
+source localrc
+# Host address
+HOST_IP=${HOST_IP:-10.10.100.51}
+EXT_HOST_IP=$PUBLIC_ADDRESS
+
+# MySQL definitions
+MYSQL_USER=openstack
+MYSQL_DATABASE=keystone
+MYSQL_HOST=$HOST_IP
+MYSQL_PASSWORD=$MYSQLPASS
+
+# Keystone definitions
+KEYSTONE_REGION=RegionOne
+export SERVICE_TOKEN=ADMIN
+export SERVICE_ENDPOINT="http://${HOST_IP}:35357/v2.0"
+
+while getopts "u:D:p:m:K:R:E:T:vh" opt; do
+  case $opt in
+    u)
+      MYSQL_USER=$OPTARG
+      ;;
+    D)
+      MYSQL_DATABASE=$OPTARG
+      ;;
+    p)
+      MYSQL_PASSWORD=$OPTARG
+      ;;
+    m)
+      MYSQL_HOST=$OPTARG
+      ;;
+    K)
+      MASTER=$OPTARG
+      ;;
+    R)
+      KEYSTONE_REGION=$OPTARG
+      ;;
+    E)
+      export SERVICE_ENDPOINT=$OPTARG
+      ;;
+    T)
+      export SERVICE_TOKEN=$OPTARG
+      ;;
+    v)
+      set -x
+      ;;
+    h)
+      cat <<EOF
+Usage: $0 [-m mysql_hostname] [-u mysql_username] [-D mysql_database] [-p mysql_password]
+       [-K keystone_master ] [ -R keystone_region ] [ -E keystone_endpoint_url ] 
+       [ -T keystone_token ]
+          
+Add -v for verbose mode, -h to display this message.
+EOF
+      exit 0
+      ;;
+    \?)
+      echo "Unknown option -$OPTARG" >&2
+      exit 1
+      ;;
+    :)
+      echo "Option -$OPTARG requires an argument" >&2
+      exit 1
+      ;;
+  esac
+done  
+
+if [ -z "$KEYSTONE_REGION" ]; then
+  echo "Keystone region not set. Please set with -R option or set KEYSTONE_REGION variable." >&2
+  missing_args="true"
+fi
+
+if [ -z "$SERVICE_TOKEN" ]; then
+  echo "Keystone service token not set. Please set with -T option or set SERVICE_TOKEN variable." >&2
+  missing_args="true"
+fi
+
+if [ -z "$SERVICE_ENDPOINT" ]; then
+  echo "Keystone service endpoint not set. Please set with -E option or set SERVICE_ENDPOINT variable." >&2
+  missing_args="true"
+fi
+
+if [ -z "$MYSQL_PASSWORD" ]; then
+  echo "MySQL password not set. Please set with -p option or set MYSQL_PASSWORD variable." >&2
+  missing_args="true"
+fi
+
+if [ -n "$missing_args" ]; then
+  exit 1
+fi
+ 
+keystone service-create --name nova --type compute --description 'OpenStack Compute Service'
+keystone service-create --name cinder --type volume --description 'OpenStack Volume Service'
+keystone service-create --name glance --type image --description 'OpenStack Image Service'
+keystone service-create --name keystone --type identity --description 'OpenStack Identity'
+keystone service-create --name ec2 --type ec2 --description 'OpenStack EC2 service'
+keystone service-create --name quantum --type network --description 'OpenStack Networking service'
+
+create_endpoint () {
+  case $1 in
+    compute)
+    keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':8774/v2/$(tenant_id)s' --adminurl 'http://'"$HOST_IP"':8774/v2/$(tenant_id)s' --internalurl 'http://'"$HOST_IP"':8774/v2/$(tenant_id)s'
+    ;;
+    volume)
+    keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':8776/v1/$(tenant_id)s' --adminurl 'http://'"$HOST_IP"':8776/v1/$(tenant_id)s' --internalurl 'http://'"$HOST_IP"':8776/v1/$(tenant_id)s'
+    ;;
+    image)
+    keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':9292/v2' --adminurl 'http://'"$HOST_IP"':9292/v2' --internalurl 'http://'"$HOST_IP"':9292/v2'
+    ;;
+    identity)
+    keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':5000/v2.0' --adminurl 'http://'"$HOST_IP"':35357/v2.0' --internalurl 'http://'"$HOST_IP"':5000/v2.0'
+    ;;
+    ec2)
+    keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':8773/services/Cloud' --adminurl 'http://'"$HOST_IP"':8773/services/Admin' --internalurl 'http://'"$HOST_IP"':8773/services/Cloud'
+    ;;
+    network)
+    keystone endpoint-create --region $KEYSTONE_REGION --service-id $2 --publicurl 'http://'"$EXT_HOST_IP"':9696/' --adminurl 'http://'"$HOST_IP"':9696/' --internalurl 'http://'"$HOST_IP"':9696/'
+    ;;
+  esac
+}
+
+for i in compute volume image object-store identity ec2 network; do
+  id=`mysql -h "$MYSQL_HOST" -u "$MYSQL_USER" -p"$MYSQL_PASSWORD" "$MYSQL_DATABASE" -ss -e "SELECT id FROM service WHERE type='"$i"';"` || exit 1
+  create_endpoint $i $id
+done

software/openstack/templates/network.py

+#!/usr/bin/env python
+
+#Print Network address and generate range of 60 IPV4s for Openstack floatings IPs
+
+import os
+import sys
+from netaddr import IPNetwork
+
+def getNetwork(ipaddress, mask):
+	net = str(IPNetwork('%s/%s' % (ipaddress, mask)).cidr.network)
+	net_cidr = str(IPNetwork('%s/%s' % (ipaddress, mask)).cidr)
+	items = ipaddress.split('.')
+	base = "%s.%s.%s" % (items[0], items[1], items[2])
+	if int(items[3])+60 < 254:
+		ranges = "%s.%s %s.%s" % (base, (int(items[3])+1), 
+			base, (int(items[3])+60))
+	else:
+		ranges = "%s.%s %s.%s" % (base, (int(items[3])-1), 
+			base, (int(items[3])-60))
+	return net + " " + net_cidr + " " + ranges
+	
+if __name__ == '__main__':
+	print getNetwork(sys.argv[1], sys.argv[2])
+	exit(0)
\ No newline at end of file

software/openstack/templates/openstack-install.sh.in

@@ -85,4 +85,3 @@ fi
 #sudo iptables -t nat -A POSTROUTING -s $FLOATING_RANGE -j MASQUERADE
 
 exit 0
-

software/openstack/templates/ssh-configure.py.in

@@ -24,6 +24,9 @@ hostname = '${:host-ip}'
 ssh_run = os.path.join('${:nova-result}', 'nova-configure.log')
 ssh_check = os.path.join('${:nova-result}', 'ssh_check.log')
 nova_configure = '${:nova-configure}'
+keystone_script = '${:keystone-script}'
+keystone_endpoints_script = '${:keystone-endpoints-script}'
+floating_ip_generate_script = '${:floating-ip-generate}'
 instance = '${:instance}'.strip() #Type: manage or compute
 
 def getClient():
@@ -42,7 +45,7 @@ def installCompute():
 
   #Install nova components and services
   print "Installing nova..." 
-  install_command = "echo %s | sudo -S /bin/sh configure.sh" % password
+  install_command = "echo %s | sudo -S /bin/bash -xe configure.sh 2>&1 | tee install.log" % password
   stdin, stdout, stderr = client.exec_command(install_command)
   with open(ssh_run, 'a') as output:
     output.write(stdout.read())
@@ -56,16 +59,26 @@ def installCompute():
 
 def installManage():
   
+  #copy keystone configure and network address generate scripts
+  sftp = client.open_sftp()
+  result = sftp.put(keystone_script, 'keystone_basic.sh' )
+  print 'Keystone Basic Configuration script has been copied successfully! File size: %s' % result.st_size
+  result = sftp.put(keystone_endpoints_script, 'keystone_endpoints_basic.sh' )
+  print 'Keystone Endpoints Configuration script has been copied successfully! File size: %s' % result.st_size
+  result = sftp.put(floating_ip_generate_script, 'network.py' )
+  print 'Network generate script has been copied successfully! File size: %s' % result.st_size
+  sftp.close()
+  
   #Install nova components and services
   print "Downloading and installing Openstack on computer..."
-  install_command = "echo %s | sudo -S /bin/sh configure.sh" % password
+  install_command = "echo %s | sudo -S /bin/bash -xe configure.sh 2>&1 | tee install.log" % password
   stdin, stdout, stderr = client.exec_command(install_command)
   with open(ssh_run, 'w') as output:
     output.write(stdout.read())
-  #Check installation status
+    
   #Check nova service status
   print "Checking nova service status..."
-  nova_command = 'nova-manage service list'
+  nova_command = 'echo %s | sudo -S nova-manage service list' % password
   stdin, stdout, stderr = client.exec_command(nova_command)
   with open(ssh_check, 'w') as output:
     output.write(stdout.read())
@@ -77,11 +90,11 @@ if __name__ == '__main__':
     time.sleep(5)
   try:
     #Try to run openstack command before all other system process are started
-    time.sleep(30)
+    time.sleep(20)
     #Write file configure.sh to use.
     sftp = client.open_sftp()
     result = sftp.put(nova_configure, 'configure.sh' )
-    print 'Nova configuration file has been copied successfully! File size: %s' % result.st_size
+    print 'Nova configuration scipt has been copied successfully! File size: %s' % result.st_size
     sftp.close()
     if instance == "manage":
       installManage()

software/openstack/templates/stack_controller_grizzly.sh.in

+#!/bin/bash -xe
+
+#stack_controller_grizzly.sh: Should install and configure all needed openstack packages.
+#This script should work on SlapOS environment, using a Virtual Machine
+# Warning: this script has been tested only on Ubuntu 12.04.
+
+#sudo su
+
+export DEBIAN_FRONTEND=noninteractive
+
+apt-get -y install ubuntu-cloud-keyring python-software-properties software-properties-common python-keyring
+echo deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-updates/grizzly main >> /etc/apt/sources.list.d/grizzly.list
+
+apt-get update
+apt-get -y upgrade
+apt-get -y dist-upgrade
+
+
+###############################################################################################
+#####  Configure Network
+###############################################################################################
+
+apt-get install -y openvswitch-switch openvswitch-datapath-lts-raring-dkms
+apt-get install -y vlan bridge-utils
+
+#br-int will be used for VM integration
+ovs-vsctl add-br br-int
+
+#br-ex is used to make to access the internet (not covered in this guide)
+ovs-vsctl add-br br-ex
+ovs-vsctl add-port br-ex eth0
+
+if [ -f network.conf ]
+then
+    IPv4=`cat network.conf | cut -d: -f1`
+    MASK=`cat network.conf | cut -d: -f2`
+    GATEWAY=`cat network.conf | cut -d: -f3`
+    BCAST=`cat network.conf | cut -d: -f4`
+else
+    GATEWAY=`route | grep default | awk '{print $2}'`
+    MASK=`ifconfig eth0 | grep 'inet adr:' |  awk '{ print $4}' | cut -d: -f2`
+    BCAST=`ifconfig eth0 | grep 'inet adr:' |  awk '{ print $3}' | cut -d: -f2`
+    IPv4=`ip addr show eth0 | grep 'inet ' | awk '{print $2}' | cut -d/ -f1`
+    echo "$IPv4:$MASK:$GATEWAY:$BCAST" > network.conf
+fi
+
+/bin/cat << EOF > /etc/network/interfaces
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+# The loopback network interface
+auto lo
+iface lo inet loopback
+# The primary network interface
+
+#For Exposing OpenStack API over the internet
+# VM internet Access
+auto eth0
+iface eth0 inet manual
+up ifconfig \$IFACE 0.0.0.0 up
+up ip link set \$IFACE promisc on
+down ip link set \$IFACE promisc off
+down ifconfig \$IFACE down
+
+auto br-ex
+iface br-ex inet static
+        address $IPv4
+        netmask $MASK
+        broadcast $BCAST
+        gateway $GATEWAY
+        dns-nameservers 8.8.8.8
+
+#Not internet connected(used for OpenStack management)
+#auto eth0
+#iface eth0 inet static
+#address 10.10.100.51
+#netmask 255.255.255.0
+
+EOF
+
+chmod 644 /etc/network/interfaces
+/etc/init.d/networking restart
+
+###############################################################################################
+#####  Network Fowarding
+###############################################################################################
+
+sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf
+
+# To save you from rebooting, perform the following
+sysctl net.ipv4.ip_forward=1
+
+iptables --table nat --append POSTROUTING --out-interface eth1 -j MASQUERADE
+iptables --append FORWARD --in-interface br-ex -j ACCEPT
+
+###############################################################################################
+#####  Variables to use
+###############################################################################################
+/bin/cat << EOF > localrc
+MYSQLPASS=${:nova-passwd}
+ADMIN_PASSWORD=${:nova-passwd}
+SERVICE_PASSWORD=${:nova-passwd}
+RABBIT_PASS=${:nova-passwd}
+HOST_IP=$IPv4
+PUBLIC_ADDRESS=$IPv4
+EXT_HOST_IP=$IPv4
+USER_PASSWORD=\$ADMIN_PASSWORD
+USER_NAME=${:user-name}
+PROJECT=${:project}
+
+EOF
+
+source localrc
+CURRENT_DIR=`pwd`
+
+###############################################################################################
+#####  Install Mysql, ntp, MysqlDB and RabbitMQ
+###############################################################################################
+apt-get install -y mysql-server python-mysqldb
+
+mysqladmin -u root password $MYSQLPASS
+/sbin/stop mysql
+
+sed -i 's/127.0.0.1/0.0.0.0/g' /etc/mysql/my.cnf
+service mysql restart
+
+sleep 5
+
+apt-get install -y rabbitmq-server
+
+apt-get install -y ntp
+
+sed -i 's/server ntp.ubuntu.com/server ntp.ubuntu.com\nserver 127.127.1.0\nfudge 127.127.1.0 stratum 10/g' /etc/ntp.conf
+service ntp restart
+
+sleep 1.5
+
+##############################################################################
+## Create MySQL accounts and databases of Nova, Glance, Keystone and Cinder
+##############################################################################
+
+/bin/cat << EOF | /usr/bin/mysql -uroot -p$MYSQLPASS
+DROP DATABASE IF EXISTS keystone;
+DROP DATABASE IF EXISTS glance;
+DROP DATABASE IF EXISTS nova;
+DROP DATABASE IF EXISTS cinder;
+DROP DATABASE IF EXISTS horizon;
+DROP DATABASE IF EXISTS quantum;
+CREATE DATABASE keystone;
+CREATE DATABASE glance;
+CREATE DATABASE nova;
+CREATE DATABASE cinder;
+CREATE DATABASE horizon;
+CREATE DATABASE quantum;
+GRANT ALL ON keystone.* TO 'openstack'@'%'   IDENTIFIED BY '$MYSQLPASS';
+GRANT ALL ON glance.*   TO 'openstack'@'%'   IDENTIFIED BY '$MYSQLPASS';
+GRANT ALL ON nova.*     TO 'openstack'@'%'   IDENTIFIED BY '$MYSQLPASS';
+GRANT ALL ON cinder.*   TO 'openstack'@'%'   IDENTIFIED BY '$MYSQLPASS';
+GRANT ALL ON horizon.*   TO 'openstack'@'%'   IDENTIFIED BY '$MYSQLPASS';
+GRANT ALL ON quantum.*   TO 'openstack'@'%'   IDENTIFIED BY '$MYSQLPASS';
+EOF
+
+###############################################################################################
+#####  Install Keystone
+###############################################################################################
+
+apt-get install -y keystone
+
+service keystone status
+
+CONF=/etc/keystone/keystone.conf
+cp $CONF $CONF.orig
+/bin/sed \
+	-e "s/^#*connection *=.*/connection = mysql:\/\/openstack:$MYSQLPASS@$HOST_IP\/keystone/" \
+	$CONF.orig > $CONF
+#	-e "s/^#* *admin_token *=.*/admin_token = $ADMIN_PASSWORD/" \
+
+service keystone restart
+sleep 1.5
+keystone-manage db_sync
+sleep 1.5
+
+cd $CURRENT_DIR
+source localrc
+chmod +x keystone_basic.sh
+chmod +x keystone_endpoints_basic.sh
+
+./keystone_basic.sh
+./keystone_endpoints_basic.sh
+
+/bin/cat << EOF > creds
+export OS_TENANT_NAME=admin
+export OS_USERNAME=admin
+export OS_PASSWORD=$ADMIN_PASSWORD
+export OS_AUTH_URL="http://$EXT_HOST_IP:5000/v2.0/"
+
+EOF
+
+source creds
+keystone user-list
+
+###############################################################################################
+#####  Install and configure Glance
+###############################################################################################
+
+apt-get install -y glance
+service glance-api status
+service glance-registry status
+
+CONF=/etc/glance/glance-api.conf
+cp $CONF $CONF.orig
+/bin/sed \
+	-e "s#^sql_connection *=.*#sql_connection = mysql://openstack:$MYSQLPASS@$HOST_IP/glance#" \
+	-e 's/^#*flavor *=.*/flavor = keystone/' \
+	$CONF.orig > $CONF
+
+CONF=/etc/glance/glance-api-paste.ini
+cp $CONF $CONF.orig
+sed -e "/delay_auth_decision/a\auth_host = $HOST_IP" \
+	-e "/delay_auth_decision/a\auth_port = 35357" \
+	-e "/delay_auth_decision/a\auth_protocol = http" \
+	-e "/delay_auth_decision/a\admin_tenant_name = service" \
+	-e "/delay_auth_decision/a\admin_user = glance" \
+	-e "/delay_auth_decision/a\admin_password = $ADMIN_PASSWORD" \
+	$CONF.orig > $CONF
+
+#    -e "s/^auth_host *=.*/auth_host = $HOST_IP/" \
+#	-e 's/%SERVICE_TENANT_NAME%/service/' \
+#	-e 's/%SERVICE_USER%/glance/' \
+#	-e "s/%SERVICE_PASSWORD%/$SERVICE_PASSWORD/" \
+#	-e 's[^#* *config_file *=.*[config_file = /etc/glance/glance-api-paste.ini[' \
+#    -e "s/127.0.0.1/$HOST_IP/" \
+#    -e "s/localhost/$HOST_I/" \
+#    -e "s/^rabbit_host *=.*/rabbit_host = 127.0.0.1/" \
+#    -e 's/^notifier_strategy *=.*/notifier_strategy = rabbit/' \
+#    -e "s/^rabbit_host *=.*/rabbit_host = $HOST_IP/" \
+#    -e 's/^rabbit_userid *=.*/rabbit_userid = nova/' \
+#    -e "s/^rabbit_password *=.*/rabbit_password = $RABBIT_PASS/" \
+#    -e "s/^rabbit_virtual_host *=.*/rabbit_virtual_host = \/nova/" \	
+
+CONF=/etc/glance/glance-registry.conf
+cp $CONF $CONF.orig
+/bin/sed \
+	-e "s/^sql_connection *=.*/sql_connection = mysql:\/\/openstack:$MYSQLPASS@$HOST_IP\/glance/" \
+	-e 's/^#*flavor *=.*/flavor=keystone/' \
+	$CONF.orig > $CONF
+
+#    -e "s/127.0.0.1/$HOST_IP/" \
+#    -e "s/localhost/$HOST_IP/" \
+#	-e 's/^#* *config_file *=.*/config_file = \/etc\/glance\/glance-registry-paste.ini/' \
+#    -e "s/^auth_host *=.*/auth_host = $HOST_IP/" \
+#	-e 's/%SERVICE_TENANT_NAME%/service/' \
+#	-e 's/%SERVICE_USER%/glance/' \
+#	-e "s/%SERVICE_PASSWORD%/$ADMIN_PASSWORD/" \
+
+CONF=/etc/glance/glance-registry-paste.ini
+cp $CONF $CONF.orig
+sed -e "/keystoneclient.middleware.auth_token:filter_factory/a\auth_host = $HOST_IP" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\auth_port = 35357" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\auth_protocol = http" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\admin_tenant_name = service" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\admin_user = glance" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\admin_password = $ADMIN_PASSWORD" \
+	$CONF.orig > $CONF
+
+service glance-api restart; service glance-registry restart
+sleep 1.5
+glance-manage db_sync
+service glance-registry restart; service glance-api restart
+sleep 1.5
+
+glance image-create --name ${:image-name} --is-public true --container-format bare --disk-format qcow2 --location ${:image-url}
+glance image-list
+
+###############################################################################################
+#####  Install and configure Quantum
+###############################################################################################
+
+apt-get install -y quantum-server quantum-plugin-openvswitch quantum-plugin-openvswitch-agent dnsmasq quantum-dhcp-agent quantum-l3-agent
+
+#Replace configuration file:
+
+CONF=/etc/quantum/api-paste.ini
+cp $CONF $CONF.orig
+sed -e "/keystoneclient.middleware.auth_token:filter_factory/a\auth_host = $HOST_IP" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\auth_port = 35357" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\auth_protocol = http" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\admin_tenant_name = service" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\admin_user = quantum" \
+	-e "/keystoneclient.middleware.auth_token:filter_factory/a\admin_password = $ADMIN_PASSWORD" \
+	$CONF.orig > $CONF
+
+CONF=/etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini
+cp $CONF $CONF.orig
+sed -e "s/^sql_connection *=.*/sql_connection = mysql:\/\/openstack:$MYSQLPASS@$HOST_IP\/quantum/" \
+	-e "s/^# firewall_driver *=.*/firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver/" \
+	-e "/^# Example: bridge_mappings/a\tenant_network_type = gre" \
+	-e "/^# Example: bridge_mappings/a\tunnel_id_ranges = 1:1000" \
+	-e "/^# Example: bridge_mappings/a\integration_bridge = br-int" \
+	-e "/^# Example: bridge_mappings/a\tunnel_bridge = br-tun" \
+	-e "/^# Example: bridge_mappings/a\local_ip = $HOST_IP" \
+	-e "/^# Example: bridge_mappings/a\enable_tunneling = True" \
+	$CONF.orig > $CONF
+
+CONF=/etc/quantum/metadata_agent.ini
+cp $CONF $CONF.orig
+sed -e "s/^auth_url *=.*/auth_url = http:\/\/$HOST_IP:35357\/v2.0/" \
+	-e 's/%SERVICE_TENANT_NAME%/service/' \
+	-e 's/%SERVICE_USER%/quantum/' \
+	-e "s/%SERVICE_PASSWORD%/$ADMIN_PASSWORD/" \
+	-e "s/^# nova_metadata_ip *=.*/nova_metadata_ip = 127.0.0.1/" \
+	-e "s/^# nova_metadata_port *=.*/nova_metadata_port = 8775/" \
+	-e "s/^# metadata_proxy_shared_secret *=.*/metadata_proxy_shared_secret = helloOpenStack/" \
+	$CONF.orig > $CONF
+
+CONF=/etc/quantum/quantum.conf
+cp $CONF $CONF.orig
+sed -e "s/^auth_host *=.*/auth_host = $HOST_IP/" \
+	-e 's/%SERVICE_TENANT_NAME%/service/' \
+	-e 's/%SERVICE_USER%/quantum/' \
+	-e "s/%SERVICE_PASSWORD%/$ADMIN_PASSWORD/" \
+	$CONF.orig > $CONF
+
+
+cd /etc/init.d/; for i in $( ls quantum-* ); do sudo service $i restart; done
+sleep 1.5
+service dnsmasq restart
+sleep 1.5
+
+
+###############################################################################################
+#####  Install and configure Nova
+###############################################################################################
+
+apt-get -y install cpu-checker
+#kvm-ok
+#sleep 1.5
+apt-get install -y kvm libvirt-bin pm-utils
+
+CONF=/etc/libvirt/qemu.conf
+cp $CONF $CONF.orig
+
+/bin/cat << EOF >> $CONF
+cgroup_device_acl = [
+"/dev/null", "/dev/full", "/dev/zero",
+"/dev/random", "/dev/urandom",
+"/dev/ptmx", "/dev/kvm", "/dev/kqemu",
+"/dev/rtc", "/dev/hpet","/dev/net/tun"
+]
+EOF
+
+virsh net-destroy default
+virsh net-undefine default
+
+CONF=/etc/libvirt/libvirtd.conf
+cp $CONF $CONF.orig
+/bin/sed \
+	-e 's/^#listen_tls *=.*/listen_tls = 0/' \
+    -e 's/^#listen_tcp *=.*/listen_tcp = 1/' \
+    -e 's/^#auth_tcp *=.*/auth_tcp = "none"/' \
+    $CONF.orig > $CONF
+
+CONF=/etc/init/libvirt-bin.conf
+cp $CONF $CONF.orig
+/bin/sed \
+	-e 's/^env libvirtd_opts=.*/env libvirtd_opts="-d -l"/' \
+	$CONF.orig > $CONF
+
+CONF=/etc/default/libvirt-bin
+cp $CONF $CONF.orig
+/bin/sed \
+	-e 's/^libvirtd_opts=.*/libvirtd_opts="-d -l"/' \
+	$CONF.orig > $CONF
+
+service dbus restart && service libvirt-bin restart
+sleep 1.5
+
+#Install Nova-* services
+apt-get install -y nova-api nova-cert novnc nova-consoleauth nova-scheduler nova-novncproxy nova-doc nova-conductor nova-compute-kvm
+
+cd /etc/init.d/; for i in $( ls nova-* ); do service $i status; cd; done
+
+CONF=/etc/nova/api-paste.ini
+cp $CONF $CONF.orig
+/bin/sed \
+    -e "s/^auth_host *=.*/auth_host = $HOST_IP/" \
+	-e 's/%SERVICE_TENANT_NAME%/service/' \
+	-e 's/%SERVICE_USER%/nova/' \
+	-e "s/%SERVICE_PASSWORD%/$ADMIN_PASSWORD/" \
+	-e "s/^#signing_dir *=.*/signing_dirname = \/tmp\/keystone-signing-nova/" \
+	$CONF.orig > $CONF
+
+CONF=/etc/nova/nova.conf
+cp $CONF $CONF.orig
+/bin/cat << EOF > $CONF
+[DEFAULT]
+logdir=/var/log/nova
+state_path=/var/lib/nova
+lock_path=/run/lock/nova
+verbose=True
+api_paste_config=/etc/nova/api-paste.ini
+compute_scheduler_driver=nova.scheduler.simple.SimpleScheduler
+rabbit_host=$HOST_IP
+nova_url=http://$HOST_IP:8774/v1.1/
+sql_connection=mysql://openstack:$MYSQLPASS@$HOST_IP/nova
+root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf
+
+# Auth
+use_deprecated_auth=false
+auth_strategy=keystone
+
+# Imaging service
+glance_api_servers=$HOST_IP:9292
+image_service=nova.image.glance.GlanceImageService
+
+# Vnc configuration
+novnc_enabled=true
+novncproxy_base_url=http://$PUBLIC_ADDRESS:6080/vnc_auto.html
+novncproxy_port=6080
+vncserver_proxyclient_address=$HOST_IP
+vncserver_listen=0.0.0.0
+
+# Network settings
+network_api_class=nova.network.quantumv2.api.API
+quantum_url=http://$HOST_IP:9696
+quantum_auth_strategy=keystone
+quantum_admin_tenant_name=service
+quantum_admin_username=quantum
+quantum_admin_password=$SERVICE_PASSWORD
+quantum_admin_auth_url=http://$HOST_IP:35357/v2.0
+libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriver
+linuxnet_interface_driver=nova.network.linux_net.LinuxOVSInterfaceDriver
+#If you want Quantum + Nova Security groups
+firewall_driver=nova.virt.firewall.NoopFirewallDriver
+security_group_api=quantum
+#If you want Nova Security groups only, comment the two lines above and uncomment line -1-.
+#-1-firewall_driver=nova.virt.libvirt.firewall.IptablesFirewallDriver
+
+#Metadata
+service_quantum_metadata_proxy = True
+quantum_metadata_proxy_shared_secret = helloOpenStack
+metadata_host = $HOST_IP
+metadata_listen = 127.0.0.1
+metadata_listen_port = 8775
+
+# Compute #
+compute_driver=libvirt.LibvirtDriver
+
+# Cinder #
+volume_api_class=nova.volume.cinder.API
+osapi_volume_listen_port=5900
+EOF
+
+CONF=/etc/nova/nova-compute.conf
+cp $CONF $CONF.orig
+/bin/cat << EOF > $CONF
+[DEFAULT]
+libvirt_type=qemu
+libvirt_ovs_bridge=br-int
+libvirt_vif_type=ethernet
+libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriver
+libvirt_use_virtio_for_bridges=True
+EOF
+
+nova-manage db sync
+cd /etc/init.d/; for i in $( ls nova-* ); do sudo service $i restart; done
+sleep 1.5
+nova-manage service list
+sleep 1.5
+
+
+###############################################################################################
+#####  Install and configure Cinder
+###############################################################################################
+
+apt-get install -y cinder-api cinder-scheduler cinder-volume iscsitarget open-iscsi iscsitarget-dkms
+sed -i 's/false/true/g' /etc/default/iscsitarget
+
+service iscsitarget start
+service open-iscsi start
+
+
+CONF=/etc/cinder/cinder.conf
+cp $CONF $CONF.orig
+/bin/cat << EOF > $CONF
+[DEFAULT]
+rootwrap_config = /etc/cinder/rootwrap.conf
+api_paste_confg = /etc/cinder/api-paste.ini
+iscsi_helper = ietadm
+volume_name_template = volume-%s
+volume_group = cinder-volumes
+verbose = True
+auth_strategy = keystone
+state_path = /var/lib/cinder
+lock_path = /var/lock/cinder
+volumes_dir = /var/lib/cinder/volumes
+# LOGGING
+log_file=cinder.log
+log_dir=/var/log/cinder
+
+# OSAPI
+osapi_volume_extension = cinder.api.openstack.volume.contrib.standard_extensions
+osapi_max_limit = 2000
+
+# RABBIT
+#rabbit_host=$HOST_IP
+#rabbit_virtual_host=/nova
+#rabbit_userid=nova
+#rabbit_password=$RABBIT_PASS
+
+# MYSQL
+sql_connection = mysql://openstack:$MYSQLPASS@$HOST_IP/cinder
+
+debug = True
+EOF
+
+CONF=/etc/cinder/api-paste.ini
+cp $CONF $CONF.orig
+/bin/sed \
+    -e "s/^service_host *=.*/service_host = $PUBLIC_ADDRESS/" \
+    -e "s/^auth_host *=.*/auth_host = $HOST_IP/" \
+	-e 's/%SERVICE_TENANT_NAME%/service/' \
+	-e 's/%SERVICE_USER%/cinder/' \
+	-e "s/%SERVICE_PASSWORD%/$ADMIN_PASSWORD/" \
+	$CONF.orig > $CONF
+
+cinder-manage db sync
+
+CINDER_VOL_DIR=/var/lib/cinder
+cd $CINDER_VOL_DIR
+dd if=/dev/zero of=cinder-volumes bs=1 count=0 seek=2G
+losetup /dev/loop2 cinder-volumes
+
+#Skip this part
+#fdisk /dev/loop2
+#n
+#p
+#1
+#ENTER
+#ENTER
+#t
+#8e
+#w
+
+pvcreate /dev/loop2
+vgcreate cinder-volumes /dev/loop2
+
+/bin/cat << EOF > /etc/init.d/cinder-setup-backing-file
+losetup /dev/loop2 $CINDER_VOL_DIR/cinder-volumes
+exit 0
+EOF
+
+sudo chmod 755 /etc/init.d/cinder-setup-backing-file
+sudo ln -s /etc/init.d/cinder-setup-backing-file /etc/rc2.d/S10cinder-setup-backing-file
+cd $CURRENT_DIR
+
+###############################################################################################
+#####  Restore user access on files
+###############################################################################################
+for i in nova keystone glance cinder
+do
+	chown -R $i /etc/$i
+done
+rm -r /var/log/cinder/cinder*
+cd /etc/init.d/; for i in $( ls cinder-* ); do sudo service $i restart; done
+sleep 1.5
+cd /etc/init.d/; for i in $( ls cinder-* ); do sudo service $i status; done
+sleep 1.5
+
+###############################################################################################
+#####  Install Horizon
+###############################################################################################
+
+apt-get -y install openstack-dashboard memcached
+dpkg --purge openstack-dashboard-ubuntu-theme
+service apache2 restart; service memcached restart
+
+###############################################################################################
+#####  Configure quantum network
+###############################################################################################
+apt-get install -y python-netaddr
+cd $CURRENT_DIR
+
+function get_id () {
+    echo `"$@" | awk '/ id / { print $4 }'`
+}
+
+source creds
+MEMDER_ROLE=$(keystone role-list | grep " Member" | awk '{print $2}')
+ADMIN_ROLE=$(keystone role-list | grep " admin" | awk '{print $2}')
+L3_AGENT_ID=$(quantum agent-list | grep " L3 agent" | awk '{print $2}')
+PROJECT_ID=$(get_id keystone tenant-create --name $PROJECT)
+USER_ID=$(get_id keystone user-create --name=$USER_NAME --pass=$USER_PASSWORD --tenant-id $PROJECT_ID --email=$USER_NAME@domain.com)
+keystone user-role-add --tenant-id $PROJECT_ID  --user-id $USER_ID --role-id $MEMDER_ROLE
+quantum net-create --tenant-id $PROJECT_ID net_$PROJECT
+SUBNET_ID=$(get_id quantum subnet-create --tenant-id $PROJECT_ID net_$PROJECT 50.50.1.0/24 --dns_nameservers list=true 8.8.8.7 8.8.8.8)
+ROUTER_ID=$(get_id quantum router-create --tenant-id $PROJECT_ID router_$PROJECT)
+
+quantum l3-agent-router-add $L3_AGENT_ID router_$PROJECT
+quantum router-interface-add $ROUTER_ID $SUBNET_ID
+
+cd /etc/init.d/; for i in $( ls quantum-* ); do sudo service $i restart; done
+sleep 2
+cd $CURRENT_DIR
+chmod +x network.py
+EXT_NET_ID=$(get_id quantum net-create --tenant-id $ADMIN_ROLE ext_net --router:external=True)
+
+NETWORK=`./network.py $IPv4 $MASK | cut -d' ' -f2`
+POOL_START=`./network.py $IPv4 $MASK | cut -d' ' -f3`
+POOL_END=`./network.py $IPv4 $MASK | cut -d' ' -f4`
+quantum subnet-create --tenant-id $ADMIN_ROLE --allocation-pool start=$POOL_START,end=$POOL_END --gateway $IPv4 ext_net $NETWORK --enable_dhcp=False
+
+quantum router-gateway-set $ROUTER_ID $EXT_NET_ID
+
+/bin/cat << EOF > creds_$PROJECT
+
+export OS_TENANT_NAME=$PROJECT
+export OS_USERNAME=$USER_NAME
+export OS_PASSWORD=$USER_PASSWORD
+export OS_AUTH_URL="http://$PUBLIC_ADDRESS:5000/v2.0/"
+
+EOF
+
+source creds_$PROJECT
+
+nova --no-cache secgroup-add-rule default icmp -1 -1 0.0.0.0/0
+nova --no-cache secgroup-add-rule default tcp 22 22 0.0.0.0/0
+
+quantum floatingip-create ext_net
\ No newline at end of file