Doc, minor fix for Profinet

abb/wbl/mcomp/src/abb.wb_load

@@ -85376,11 +85376,11 @@ this parameter settings menu."
     !  The main parameter:   
     ! 
     !   1  Slave/device name: abb-drive1
-    !   2  Slave/device Ip adress 10.0.0.11 and mask 255.255.255.0
+    !   2  Slave/device Ip adress 192.168.90.11 and mask 255.255.254.0
     ! 
     !  Before starting the Profinet Viewer the NIC configuration in this case are
-    !  done like example 9 below, i.e. Proview master station ip adress 10.0.0.1,
-    !  mask 255.255.255.0, HWaddress aa:00:04:00:21:14 and ethernet interface eth1.
+    !  done like example 9 below, i.e. Proview master station ip adress 192.168.90.1,
+    !  mask 255.255.254.0, HWaddress aa:00:04:00:21:14 and ethernet interface eth1.
     ! 
     !  Note The HWadress must be between an interval specified under the Profinet master
     !  class object PnControllerSoftingPNAK,

profibus/wbl/mcomp/src/profibus.wb_load

@@ -2941,8 +2941,8 @@ Volume Profibus $ClassVolume 0.0.250.7
     ! 
     !  auto eth1
     !  iface eth1 inet static
-    !                  address 10.0.0.1
-    !                  netmask 255.255.255.0
+    !                  address 192.168.90.1
+    !                  netmask 255.255.254.0
     !                  hwaddress ether xx:xx:xx:xx:xx:xx
     !
     !  where  xx:xx:xx:xx:xx:xx needs to be: