docs: migrated section for versioning

from quickstart.txt to functionalities.txt

docs/userguide/functionalities.txt

@@ -1336,3 +1336,88 @@ A few important points for writing revision control file finders:
   with the absence of needed programs (i.e., ones belonging to the revision
   control system itself.  It *may*, however, use ``distutils.log.warn()`` to
   inform the user of the missing program(s).
+
+Specifying Your Project's Version
+---------------------------------
+
+Setuptools can work well with most versioning schemes; there are, however, a
+few special things to watch out for, in order to ensure that setuptools and
+other tools can always tell what version of your package is newer than another
+version.  Knowing these things will also help you correctly specify what
+versions of other projects your project depends on.
+
+A version consists of an alternating series of release numbers and pre-release
+or post-release tags.  A release number is a series of digits punctuated by
+dots, such as ``2.4`` or ``0.5``.  Each series of digits is treated
+numerically, so releases ``2.1`` and ``2.1.0`` are different ways to spell the
+same release number, denoting the first subrelease of release 2.  But  ``2.10``
+is the *tenth* subrelease of release 2, and so is a different and newer release
+from ``2.1`` or ``2.1.0``.  Leading zeros within a series of digits are also
+ignored, so ``2.01`` is the same as ``2.1``, and different from ``2.0.1``.
+
+Following a release number, you can have either a pre-release or post-release
+tag.  Pre-release tags make a version be considered *older* than the version
+they are appended to.  So, revision ``2.4`` is *newer* than revision ``2.4c1``,
+which in turn is newer than ``2.4b1`` or ``2.4a1``.  Postrelease tags make
+a version be considered *newer* than the version they are appended to.  So,
+revisions like ``2.4-1`` and ``2.4pl3`` are newer than ``2.4``, but are *older*
+than ``2.4.1`` (which has a higher release number).
+
+A pre-release tag is a series of letters that are alphabetically before
+"final".  Some examples of prerelease tags would include ``alpha``, ``beta``,
+``a``, ``c``, ``dev``, and so on.  You do not have to place a dot or dash
+before the prerelease tag if it's immediately after a number, but it's okay to
+do so if you prefer.  Thus, ``2.4c1`` and ``2.4.c1`` and ``2.4-c1`` all
+represent release candidate 1 of version ``2.4``, and are treated as identical
+by setuptools.
+
+In addition, there are three special prerelease tags that are treated as if
+they were the letter ``c``: ``pre``, ``preview``, and ``rc``.  So, version
+``2.4rc1``, ``2.4pre1`` and ``2.4preview1`` are all the exact same version as
+``2.4c1``, and are treated as identical by setuptools.
+
+A post-release tag is either a series of letters that are alphabetically
+greater than or equal to "final", or a dash (``-``).  Post-release tags are
+generally used to separate patch numbers, port numbers, build numbers, revision
+numbers, or date stamps from the release number.  For example, the version
+``2.4-r1263`` might denote Subversion revision 1263 of a post-release patch of
+version ``2.4``.  Or you might use ``2.4-20051127`` to denote a date-stamped
+post-release.
+
+Notice that after each pre or post-release tag, you are free to place another
+release number, followed again by more pre- or post-release tags.  For example,
+``0.6a9.dev-r41475`` could denote Subversion revision 41475 of the in-
+development version of the ninth alpha of release 0.6.  Notice that ``dev`` is
+a pre-release tag, so this version is a *lower* version number than ``0.6a9``,
+which would be the actual ninth alpha of release 0.6.  But the ``-r41475`` is
+a post-release tag, so this version is *newer* than ``0.6a9.dev``.
+
+For the most part, setuptools' interpretation of version numbers is intuitive,
+but here are a few tips that will keep you out of trouble in the corner cases:
+
+* Don't stick adjoining pre-release tags together without a dot or number
+  between them.  Version ``1.9adev`` is the ``adev`` prerelease of ``1.9``,
+  *not* a development pre-release of ``1.9a``.  Use ``.dev`` instead, as in
+  ``1.9a.dev``, or separate the prerelease tags with a number, as in
+  ``1.9a0dev``.  ``1.9a.dev``, ``1.9a0dev``, and even ``1.9.a.dev`` are
+  identical versions from setuptools' point of view, so you can use whatever
+  scheme you prefer.
+
+* If you want to be certain that your chosen numbering scheme works the way
+  you think it will, you can use the ``pkg_resources.parse_version()`` function
+  to compare different version numbers::
+
+    >>> from pkg_resources import parse_version
+    >>> parse_version("1.9.a.dev") == parse_version("1.9a0dev")
+    True
+    >>> parse_version("2.1-rc2") < parse_version("2.1")
+    True
+    >>> parse_version("0.6a9dev-r41475") < parse_version("0.6a9")
+    True
+
+Once you've decided on a version numbering scheme for your project, you can
+have setuptools automatically tag your in-development releases with various
+pre- or post-release tags.  See the following sections for more details:
+
+* `Tagging and "Daily Build" or "Snapshot" Releases`_
+* The `egg_info`_ command
\ No newline at end of file

docs/userguide/quickstart.txt

@@ -79,87 +79,3 @@ arguments do (except for the metadata ones), and the various ways you might use
 them in your own project(s).
 
 
-Specifying Your Project's Version
----------------------------------
-
-Setuptools can work well with most versioning schemes; there are, however, a
-few special things to watch out for, in order to ensure that setuptools and
-other tools can always tell what version of your package is newer than another
-version.  Knowing these things will also help you correctly specify what
-versions of other projects your project depends on.
-
-A version consists of an alternating series of release numbers and pre-release
-or post-release tags.  A release number is a series of digits punctuated by
-dots, such as ``2.4`` or ``0.5``.  Each series of digits is treated
-numerically, so releases ``2.1`` and ``2.1.0`` are different ways to spell the
-same release number, denoting the first subrelease of release 2.  But  ``2.10``
-is the *tenth* subrelease of release 2, and so is a different and newer release
-from ``2.1`` or ``2.1.0``.  Leading zeros within a series of digits are also
-ignored, so ``2.01`` is the same as ``2.1``, and different from ``2.0.1``.
-
-Following a release number, you can have either a pre-release or post-release
-tag.  Pre-release tags make a version be considered *older* than the version
-they are appended to.  So, revision ``2.4`` is *newer* than revision ``2.4c1``,
-which in turn is newer than ``2.4b1`` or ``2.4a1``.  Postrelease tags make
-a version be considered *newer* than the version they are appended to.  So,
-revisions like ``2.4-1`` and ``2.4pl3`` are newer than ``2.4``, but are *older*
-than ``2.4.1`` (which has a higher release number).
-
-A pre-release tag is a series of letters that are alphabetically before
-"final".  Some examples of prerelease tags would include ``alpha``, ``beta``,
-``a``, ``c``, ``dev``, and so on.  You do not have to place a dot or dash
-before the prerelease tag if it's immediately after a number, but it's okay to
-do so if you prefer.  Thus, ``2.4c1`` and ``2.4.c1`` and ``2.4-c1`` all
-represent release candidate 1 of version ``2.4``, and are treated as identical
-by setuptools.
-
-In addition, there are three special prerelease tags that are treated as if
-they were the letter ``c``: ``pre``, ``preview``, and ``rc``.  So, version
-``2.4rc1``, ``2.4pre1`` and ``2.4preview1`` are all the exact same version as
-``2.4c1``, and are treated as identical by setuptools.
-
-A post-release tag is either a series of letters that are alphabetically
-greater than or equal to "final", or a dash (``-``).  Post-release tags are
-generally used to separate patch numbers, port numbers, build numbers, revision
-numbers, or date stamps from the release number.  For example, the version
-``2.4-r1263`` might denote Subversion revision 1263 of a post-release patch of
-version ``2.4``.  Or you might use ``2.4-20051127`` to denote a date-stamped
-post-release.
-
-Notice that after each pre or post-release tag, you are free to place another
-release number, followed again by more pre- or post-release tags.  For example,
-``0.6a9.dev-r41475`` could denote Subversion revision 41475 of the in-
-development version of the ninth alpha of release 0.6.  Notice that ``dev`` is
-a pre-release tag, so this version is a *lower* version number than ``0.6a9``,
-which would be the actual ninth alpha of release 0.6.  But the ``-r41475`` is
-a post-release tag, so this version is *newer* than ``0.6a9.dev``.
-
-For the most part, setuptools' interpretation of version numbers is intuitive,
-but here are a few tips that will keep you out of trouble in the corner cases:
-
-* Don't stick adjoining pre-release tags together without a dot or number
-  between them.  Version ``1.9adev`` is the ``adev`` prerelease of ``1.9``,
-  *not* a development pre-release of ``1.9a``.  Use ``.dev`` instead, as in
-  ``1.9a.dev``, or separate the prerelease tags with a number, as in
-  ``1.9a0dev``.  ``1.9a.dev``, ``1.9a0dev``, and even ``1.9.a.dev`` are
-  identical versions from setuptools' point of view, so you can use whatever
-  scheme you prefer.
-
-* If you want to be certain that your chosen numbering scheme works the way
-  you think it will, you can use the ``pkg_resources.parse_version()`` function
-  to compare different version numbers::
-
-    >>> from pkg_resources import parse_version
-    >>> parse_version("1.9.a.dev") == parse_version("1.9a0dev")
-    True
-    >>> parse_version("2.1-rc2") < parse_version("2.1")
-    True
-    >>> parse_version("0.6a9dev-r41475") < parse_version("0.6a9")
-    True
-
-Once you've decided on a version numbering scheme for your project, you can
-have setuptools automatically tag your in-development releases with various
-pre- or post-release tags.  See the following sections for more details:
-
-* `Tagging and "Daily Build" or "Snapshot" Releases`_
-* The `egg_info`_ command
\ No newline at end of file